Synthesis and drug controlled release of block copolymers of poly(l-lactide) with poly(d,l-lactide) and related monomers

Four types of new biodegradable block copolymers AB, ABA, AC and AD, where A is poly(L-lactide) (PLLA), B is poly(D, L-lactide) (PDLLA), C is poly(p-dioxanone) (PDON) and D is poly(ϵ-caprolactone) (PCL) with different block lengths were synthesized and characterized by GPC, IR, ¹H-NMR and DSC. There are phase-separated and biodegradable block copolymers. Their in vitro biodegradation rates with the change of composition ratio were studied as well as the biodegradation rates of homopolymers with the series as PDON > PDLLA > PLLA in parallel with their crystallinities, i.e. from amorphous to semicrystalline. All these block copolymers were used as matrix to test their controlled release behavior of levo-norgestrel (LNG) in the form of microspheres through solvent evaporation preparation with thoroughly long-time washing to minimize the generally occurring bursting effect. As a result all of them showed almost constant rate of release even from the initial stage,     

On the enthalpy of melting of poly(l-lactide)

Poly(l-lactide) (PLLA) is an extensively employed biodegradable semicrystalline polymer with usage from implantable medical devices and drug release matrices to environmentally friendly packaging materials. Since the morphology and crystallinity considerably determine the application field, PLLA samples with a large variation in crystallinity (going from below 20% to over 70%) were prepared by different procedures. Subsequent differences in morphology, crystallinity and thermal properties were followed by scanning electron microscopy (SEM), wide angle X-ray diffraction (WAXD) measurements and differential scanning calorimetry (DSC). The value of the enthalpy of melting of a perfectly (100%) crystalline PLLA was determined (ΔH_f = 115.7?J/g).     

Biomimetic star-shaped porphyrin-cored poly(l-lactide)-b-glycopolymer block copolymers for targeted photodynamic therapy

Porphyrin-cored poly(l-lactide) (SPPLA) was successfully synthesized from ring-opening polymerization (ROP) of l-lactide initiated with porphyrin core. Then, SPPLA was coupled with benzylsulfanylthiocarbonylsufanylpropionic acid (BSPA), and a macro-reversible addition-fragmentation chain transfer (macroRAFT) polymerization agent SPPLA-BSPA was obtained. Finally, star-shaped porphyrin-cored poly(l-lactide)-b-poly(gluconamidoethyl methacrylate) (SPPLA-b-PGAMA) block copolymers were synthesized via RAFT of unprotected gluconamidoethyl methacrylate (GAMA) in 1-methyl-2-pyrrolidinone (NMP) solution at 70 °C. The structure of this block copolymer was thoroughly studied by nuclear magnetic resonance spectroscopy (NMR), gel permeation chromatography (GPC), and differential scanning calorimetry (DSC). Under the irradiation, such SPPLA-b-PGAMA copolymer exhibits efficient singlet oxygen generation and indicates high fluorescence quantum yields. Notably, with UV–vis and dynamic light scattering (DLS) analysis, SPPLA-b-PGAMA showed a very specific recognition with concanavalin A (ConA). Particularly, MTT shows that the cytotoxicity of SPPLA-b-PGAMA against COS-7 cells was very low and, when given a longer irradiation time, more BEL-7402 cancer cells died, which will be investigated in this study.     

Preparation and characterization of poly(l,l-lactide)-b-poly(ethylene glycol)-b-poly(l,l-lactide) (PLLA-PEG-PLLA) microspheres having encapsulated tetracycline

Amphiphilic triblock copolymers, based on hydrophilic poly(ethylene glycol) (PEG) blocks and hydrophobic poly(l,l-lactide) (PLLA) blocks, were used as the matrix material for the preparation of tetracycline-loaded microspheres. The morphology and thermal properties of the biodegradable microspheres were evaluated. SEM showed the predominance of the spherical shape, however, it was possible to distinguish three patterns: rough or smooth surface or uneven collapsed volume. The FTIR analysis indicated good mechanical stability and structural integrity of the PLLA-PEG-PLLA copolymer??s microspheres enclosing tetracycline. By thermal analysis it was possible to see the marginal influence of tetracycline on the glass transition and melting temperatures of the PLLA-PEG-PLLA triblock copolymer, while the results by TG indicated the presence of tetracycline in the inner structure of the microspheres, which thermal decomposition leading to char formation was triggered by the drug??s presence.     

Structure and thermal/mechanical properties of poly(l-lactide)-clay blend

Organophilic montmorillonite was obtained by the reaction of montmorillonite (MON) and distearyldimethylammonium chloride (DSAC). The modified clay and poly(l-lactide), (PLLA), were solvent-cast blended using chloroform as cosolvent. The structure and properties of the PLLA-clay blends were investigated. Thermal measurements revealed that cold crystallization took place in the as-cast PLLA, and that the clay served as a nucleating agent. From small and wide-angle x-ray scattering measurements, it was found that silicate layers forming the clay could not be individually well dispersed in the PLLA-clay blends prepared by the solvent-cast method. In other words, the clay existed in the form of tactoids, which consist of several stacked silicate monolayers. However, these tactoids formed a remarkable geometrical structure in the blend films. That is, their surfaces lay almost parallel to the film surface, and were stacked with the insertion of PLLA crystalline lamellae in the thickness direction of the film. During the blend drawing process, fibrillation took place with the formation of plane-like voids developed on the plane parallel to the film surface. Furthermore, delamination of the silicate layers did not occur even under the application of a shearing force. Finally, Young's modulus of the blend increased with the addition of a small amount of the clay. © 1997 John Wiley & Sons, Inc.     

Graphene oxide induced hydrolytic degradation behavior changes of poly(l-lactide) in different mediums

Graphene oxide (GO) has been widely used in polymer-based composites due to their promising properties originated from the two-dimensional platelet-like structure and a large number of oxygen-containing groups, including reinforcement effect, nucleation effect, barrier effect, etc. In this work, GO was introduced into poly(l-lactide) (PLLA) and the main attention was focused on investigating the effect of GO on hydrolytic degradation behavior of PLLA. The hydrolytic degradation measurements were carried out in three different mediums, including alkaline solution with a pH value of 12, acidic solution with the pH value of 2 and deionized water with the pH value of 7. It was demonstrated that in all mediums, the hydrolytic degradation of PLLA was greatly accelerated by adding GO and specifically, the more the GO in the composites, the more apparent the acceleration effect of the hydrolytic degradation was, furthermore, GO didn't change the hydrolytic degradation mechanisms of the PLLA matrix in all mediums. The microstructure evolution of the PLLA matrix during the hydrolytic degradation process was also comparatively investigated. The results demonstrated that crystallization occurred during the hydrolytic degradation process and the crystallization of the composites was also greatly promoted by GO. This work provides valuable information for the application and reclamation of the PLLA/GO composites.     

Synthesis and characterization of photocrosslinkable poly(l-lactide)s with a pendent cinnamate group

In this report, we describe the synthesis and characterization of photosensitive poly(l-lactide) with a pendent cinnamate group. α,ω-Dihydoxy terminated poly(l-lactide) (PLLA-diol) [molecular weights (MW); 2000, 4000 and 9000 g/mol ] was chain-extended with a diacyl chloride of 5-cinnamoyloxyisophthalic acid (ICA) to obtain high-molecular-weight photocrosslinkable poly(l-lactide)s (ICA/PLLA). The resulting polyesters were characterized by proton nuclear magnetic resonance spectroscopy, gel permeation chromatography, ultraviolet–visible spectroscopy, differential scanning calorimetry, thermomechanical analysis and thermogravimetry. The glass transition temperature (T_g), the melting temperature (T_m) and the degree of relative crystallinity (X_c) of ICA/PLLAs increased with the increasing MW of the PLLA-diols. The photosensitive ICA/PLLAs were irradiated with a 400 W high-pressure mercury lamp (λ > 280 nm) for various times to produce the PLLA gel films without a photoinitiator. The crosslinking rate monitored by a UV–vis spectrum decreased with the increasing MW of the PLLA-diols. The crosslinking of the ICA/PLLA ?4000 film enhanced the T_g slightly and the tensile strength and Young’s modulus significantly, while reduced the T_m and X_c. The enzymatic degradation was measured by the weight loss of the films in a phosphate buffer solution with proteinaze-k. The crosslinking of the films decreased markedly the degradation rate.     

Confinement crystallization of poly(l-lactide) induced by multiwalled carbon nanotubes and graphene nanosheets

Journal of Thermal Analysis and Calorimetry - Two sets of multiwalled carbon nanotubes (MWCNTs)/PLLA nanocomposites and graphene nanosheets (GNSs)/PLLA nanocomposites with various MWCNTs and GNSs...     

Preparation and characterization of biodegradable poly(l-lactide)/poly(ethylene glycol) microcapsules containing erythromycin by emulsion solvent evaporation technique

In this work, the producing of a biodegradable poly(l-lactide) (PLA)/poly(ethylene glycol) (PEG) microcapsule by emulsion solvent evaporation method was investigated. The effect of PEG segments added to the PLA microcapsules on the degradation, size distribution, and release behavior was studied. According to the results, PLA/PEG copolymer was more hydrophilic than PLA homopolymer, and with lower glass transition temperature. The surface of PLA/PEG microcapsules was not as smooth as that of PLA microcapsules, the mean diameters of prepared PLA and PLA/PEG microcapsules were 40 and 57 microm, respectively. And spherical forms were observed by the image analyzer and the scanning electron microscope (SEM). Drug release from microcapsules was affected by the properties of PLA/PEG copolymers determined by UV-vis spectra. It was found that the drug release rates of the microcapsules were significantly increased with adding of PEG, which explained by increasing hydrophilic groups.     

Melphalan-loaded methoxy poly(ethylene glycol)-poly(d,l-lactide) copolymer nanomicelles in the treatment of multiple myeloma

Multiple myeloma(MM) is the second most common hematological tumor characterized by the proliferation of monoclonal plasma cells. Melphalan(MEL) is commonly used in the treatment of MM and is especially essential for patients undergoing autologous stem cell transplantation(ASCT). Although many drugs for MM have been developed in recent years, chemotherapy followed by ASCT remains the optimal option. Melphalan, the backbone of the conditioning regimen, brings severe toxicities at a high dose. Nan...     

Enhanced mechanical and thermal properties of poly(l-lactide) nanocomposites assisted by polydopamine-coated multiwalled carbon nanotubes

Herein, a facile and noncovalent modification for multiwalled carbon nanotubes (MWNTs) is adopted by the self-polymerization of dopamine (DOPA). And, the polydopamine-coated MWNTs (D-MWNTs) were further incorporated into poly(l-lactide) (PLLA) matrix through the solvent-casting method. It is found that the D-MWNTs tend to be well dispersed in PLLA matrix than the pristine MWNTs and the D-MWNTs that can act as heterogeneous nucleators that evidently affect the morphology and crystallization behavior of PLLA. In addition, the significant improvement of dispersion and the interface interaction of PLLA/D-MWNTs, via dopamine coating between the MWNTs and PLLA matrix, results in enhanced mechanical and thermal properties and electrical conductivity. This facile methodology is believed to afford broad application potential in carbon nanotubes (CNTs)-based polymer nanocomposites.     

Effect of stereocomplex formation between enantiomeric poly(l,l-lactide) and poly(d,d-lactide) blocks on self-organization of amphiphilic poly(lactide)-block-poly(ethylene oxide) copolymers in dilute aqueous solution

The effect of crystallization of a hydrophobic poly(lactide) block on the self-organization of biocompatible and biodegradable amphiphilic poly(lactide)-block-poly(ethylene oxide) (PLA-b-PEO) copolymers in a dilute aqueous solution has been investigated. It was demonstrated that the co-crystallization of poly(L,L-lactide) [P(L,L)LA] and poly(d,d-lactide) [P(d,d)LA] chains under equimolar mixing of P(L,L)LA₄₆-b-PEO₁₁₃ and P(d,d)LA₅₆-b-PEO₁₁₃ copolymers resulted in the formation of stable and spontaneously water-redispersible stereocomplex micelles with semicrystalline P(L,L)LA/P(d,d)LA cores. It was shown that the P(L,L)LA₄₆ / P(d,d)LA₅₆-b-PEO₁₁₃ stereo-complex micelles produced by dialysis can be potential vehicles for the anticancer agent oxaliplatin     

Effect of content and particle size of talc on nonisothermal melt crystallization behavior of poly(l-lactide)

This work examined the effect of content and particle size of nucleating agent on nonisothermal melt crystallization behavior of poly(l-lactide) (PLLA). Two different particle sizes of talc were used as the nucleating agents of PLLA. Scanning electron microscopy observation revealed that both big and small particles of talc were homogeneously dispersed in the PLLA matrix. Talc significantly accelerated the nonisothermal melt crystallization rate of PLLA. The effect of smaller particle talc on crystallization was obviously better than that of the bigger one. The activation energy based on Friedman equation was evaluated. Lower activation energy was obtained for nucleated PLLA. Finally, addition of talc did not modify the crystal structure.

     

Morphology,rheological and crystallization behavior in thermoplastic polyurethane toughed poly(l-lactide) with stereocomplex crystallites

Melt-blending poly(l-lactide) (PLLA) with elastomers has been well demonstrated to improve toughness of PLLA. Here, we show a poly(d-lactide) (PDLA) grafted thermoplastic polyurethane (TPU) (TPU-g-PDLA) toughed PLLA with simultaneous formation of few amount stereocomplex crystallites (SCs) which exhibited higher efficient toughening than that of PLLA with TPU. The TPU-g-PDLA was prepared by the in-situ melt-reaction of TPU and PDLA with 4, 4’-diphenylmethane diisocyanate (MDI). A comparative study on morphology, rheological and crystallization behavior was also carried in PLLA/TPU, PLLA/TPU-g-PDLA and PLLA/TPU/PDLA samples. The PLLA/TPU-g-PDLA samples show the highest crystallization rate, complex viscosity, impact strength and tensile strength among PLLA/TPU, PLLA/TPU-g-PDLA and PLLA/TPU/PDLA samples, indicating that the higher interfacial interaction between TPU-g-PDLA and PLLA. Furthermore, TPU chains in TPU-g-PDLA were thought to break the intermolecular interaction of PLLA and rapid its crystallization and increase crystallinity.     

Organic/inorganic hybrid star-shaped block copolymers of poly(l-lactide) and poly(N-isopropylacrylamide) with a polyhedral oligomeric silsesquioxane core: Synthesis and self-assembly

The star-shaped organic/inorganic hybrid poly(l-lactide) (PLLA) based on polyhedral oligomeric silsesquioxane (POSS) was prepared using octa(3-hydroxypropyl) polyhedral oligomeric silsesquioxane as initiator via ring-opening polymerization (ROP) of l-lactide (LLA). The molecular weight of POSS-containing star-shaped hybrid PLLA (POSSPLLA) can be well controlled by the feed ratio of LLA to initiator. The POSSPLLA was further functionalized into the macromolecular reversible addition-fragmentation transfer (RAFT) agent for the polymerization of N-isopropylacrylamide (NIPAM), leading to the POSS-containing star-shaped organic/inorganic hybrid amphiphilic block copolymers, poly(l-lactide)–block–poly(N-isopropylacrylamide) (POSS(PLLA–b–PNIPAM)). The self-assembly behavior of POSS(PLLA–b–PNIPAM) block copolymers in aqueous solution was investigated by dynamic light scattering (DLS), transmission electron microscopy (TEM) and atomic force microscopy (AFM). DLS showed the PNIPAM block in the aggregates is temperature-responsive and its phase-transition is reversible. TEM proved that the star-shaped POSS(PLLA–b–PNIPAM) amphiphilic block copolymers can self-assemble into the vesicles in aqueous solution. The vesicular wall and coronas are composed of the hydrophobic POSS core and PLLA, and hydrophilic PNIPAM blocks, respectively. Therefore, POSSPLLA and POSS(PLLA–b–PNIPAM) block copolymers, as a class of novel organic–inorganic hybrid materials with the advantageous properties, can be potentially used in biological and medical fields.     

Cold crystallization and multiple melting behavior of poly(l-lactide) in homogeneous and in multiphasic epoxy blends

Cold crystallization and melting of poly(l-lactide) (PLLA) blended with an uncured or with an amino-cured epoxy resin (diglycidyl ether of bisphenol-A [DGEBA]) were investigated. It was found that the uncured PLLA/DGEBA blends were miscible, as they exhibited a single composition-dependent glass transition temperature (T _g). Melting point depression measurements indicated the existence of some type of interaction between the blend components, which was confirmed by Fourier transform infrared spectroscopy. Depending on the crystallization conditions and on the blend composition, a mixture of α and α′ crystals have been detected in PLLA and in uncured DGEBA/PLLA blends when crystallized from the glassy state. At high DGEBA contents, preferably imperfect α crystals are formed. On the contrary, at low DGEBA contents, the α′ form predominates and an exotherm associated to the α′–α transformation appears on the differential scanning calorimetry (DSC) scan before the main melting peak. Upon curing, the system transforms from a homogeneous mixture with a single refractive index into an opaque multiphasic one, as revealed by the existence of two T _gs in the DSC scans. These cross-linked immiscible blends displayed a single crystallization exotherm which scarcely changed with composition, and PLLA cold crystallized mainly into the α′ form from an almost pure PLLA phase; subsequently, the α′ crystals transform into the α form just before melting during the DSC scan.     

Covalent attachment of poly(ethyleneglycol) to peptides and proteins

Carbonylimidazol-l-yl-mPEG is obtained quantitatively by reacting methoxypoly(ethyleneglycol) (mPEG) with 1.1 Eq of N,N′-carbonyldiimidazole in the presence of a stoechiometric amount of 4-dimethyl-aminopyridine used as hypernucleophilic acylation catalyst. Carbonylimidazol-l-yl-mPEG is quite stable in aqueous solutions with half-lives up to 70 h in pHs ranging from 6.0 to 7.0 at 25‡C. From reactivity studies toward amines with various nucleophilic strengths, it is suggested that carbonylimidazol-l-yl-mPEG may be best used to modify α-amino terminal function of proteins selectively or to introduce amino function on PEG chains.     

Electrosynthesis and characterization of poly(3-methylthiophene) on different substrates

 We report on the study of the electropolymerization of 3-methylthiophene onto Pt, p-Si and indium-tin oxide deposited on polyester using quartz crystal microgravimetry, electrochemical and spectroelectrochemical measurements. We observe that potential variation during the galvanostatic electrodeposition is correlated with the nucleation process. The mass variation of poly(3-methylthiophene) is linear with the amount of the electrochemical charge whereas the absorbance variation curve shows two distinct slopes. The latter result has been explained in terms of conjugation length variation during polymer growth. Scanning electron microscopy analysis allowed the detection of morphological changes from a dense and compact structure to an open morphology when the poly(3-methylthiophene) film thickness increases. The roughness of the films did not change considerably with the substrate, as observed by atomic force microscopy. Absorption and photocurrent spectra at different film thicknesses show a shift of the peaks to lower wavelengths when the thickness increased, thus confirming the decrease of mean conjugation length in thicker films. Received: 1 September 1998 / Accepted: 11 November 1998