Synthesis and metal ion complexation studies of proton-ionizable calix

A series of novel N-chromogenic calix[4]arene azacrown ethers were synthesized as selective extractants of potassium ion. 1,3-Alternate calix[4]arene azacrown ethers were prepared by reacting 25,27-dipropyloxy-26,28-bis(5-chloro-3-oxapentyloxy) calix[4]arenes with p-toluenesulfonamide in the presence of potassium carbonate. The coupling reaction of calix[4]arene azacrown ether with 2-hydroxy-5-nitrobenzyl bromide in the presence of triethylamine in THF gave the chromogenic calix[4]arene azacrown ether in moderate yield. These compounds show high potassium selectivity over other metal ions as shown by two-phase extraction, bulk liquid membrane, and 1H NMR studies on a ligand-metal complex. It is assumed that the OH of the chromogenic group attached on nitrogen can assist the complexation by encapsulation of the metal.     

Potassium Sensing Calix[4]arene Crown Ethers

1,3-Alternate calix[4]arene crown-5 (1) and corresponding biscrown-5 (2) were synthesized and the complexation behavior with alkali metal ions examined. For both 1 and 2, potassium ion was selectively extracted from aqueous phase into organic phase over other alkali metal ions based on two phase extraction experiment. The complexation ratio between calix[4]arene biscrown-5 (2), in which two crown cavities connect to the calix[4]arene framework by 1,3-alternate fashion and potassium metal ion is found to 1:1 by proton NMR spectroscopy and extraction equilibria. Association constants (logK_a) for 1 and 2 were determined to give 2.51 and 3.49, respectively.     

Specific extraction behavior of amide derivative of calix[4]arene for silver (I) and gold (III) ions from highly acidic chloride media

25,26,27,28-tetrakis(N,N-diethylaminocarbonylmethoxy)-5,11,17,23-tetrakis(1,1,3,3-tetramethylbutyl)calix[4]arene, a macrocyclic extraction reagent, and p-(1,1,3,3-tetra-methylbutyl)phenoxymethyl-N,N-diethylamide, an acyclic extraction reagent corresponding to the former one, were synthesized to investigate their extraction behavior for silver(I), gold(III), palladium(II), and platinum(IV) from highly acidic solution into chloroform. In the extraction of silver and gold from hydrochloric acid solution, a completely different extraction behavior was observed between these two types of the reagents. The extraction behavior was examined in detail for silver and was found to be dependent on whether silver ion was extracted as a cationic species or a anionic species complexed with chloride ion. This was supported by proton nuclear magnetic resonance study of the calix[4]arene derivative. As a result, the extraction of silver ion with calix[4]arene derivative was very peculiar which was attributable to the fitting between cyclic size of calix[4]arene and ionic radius of silver.     

Complexation and extraction behavior of trivalent indium with multiple proton ionizable p�Ct-butylcalix[5]arene pentacaarboxylic acid derivative: a new efficient solvent extraction reagent for indium

Complexation behavior of plural ion-exchangeable p?Ct-butylcalix[5]arene pentacarboxylic acid derivative towards trivalent indium has been investigated along with its monomeric analog from weakly acidic media into chloroform. The cyclic structure of calixarene ligand providing certain cavity and cooperativity of functional groups significantly affect the complexation behavior and calixarene derivative is an excellent extractant over monomeric analog. The extraction mechanism is ion exchange and carboxylic acid groups are adequate functional sites for extraction. Mononuclear and/or polynuclear species of indium and monomeric or bridged dimeric species of calixarene are involved in complexation and the composition of extracted complex varied with solution pH. One mole of calix[5]arene derivative tend to extract 3.5 mol of indium. The loaded indium was quantitatively back extracted with 1 mol dm^?3 hydrochloric acid solution.     

Multiple proton ionizable calixarene derivatives with different ring sizes and complexation ability as efficient ionophores for complexation and solvent extraction of trivalent indium

The solvent extraction behavior of multiple proton ionizable p-tert-butylcalix[4]arene and [6]arene carboxylic acid derivatives towards indium has been investigated along with an acyclic monomeric analogue from weakly acidic media into chloroform. The extraction mechanism is ion exchange and carboxylic acid groups are adequate ligating sites for extraction. The cyclic structure of calixarene ligands to accommodate the potential guest species and the cooperativity effect of multifunctional groups significantly affect the complexation behavior and calixarene derivatives are found to be excellent extractants over the monomeric analogue. The composition of the extracted complex depends on the solution pH and attempts to determine the composition of the extracted complex for the extraction of indium have been stymied by complications arising from the formation of polynuclear species of indium and bridged polymeric species of calixarene carboxylic acid derivatives. One mole of calix[4]arene derivative extracts 2.5 moles of indium whereas the calix[6]arene derivative tends to extract 4.0 moles of indium. The loaded indium is back extracted with 1 mol dm(-3) hydrochloric acid solution. Though quantitative back extraction of indium was achieved from the fully loaded calix[6]arene derivative, it was only achieved up to 85% in the case of the calix[4]arene derivative.     

Extraction of Catecholamines by Calixarene Carboxylic Acid Derivatives

Extraction behaviors of catecholamines with a series of calixarene carboxylic acid derivatives were investigated. Relatively large calix[6]arene and calix[8]arene extract catecholamines into the organic solution, while smaller calix[4]arene and the monomer analog do not. The calix[6]arene, which has a cavity that fits a protonated amino group well, selectively extracts a primary amino compound dopamine over other catecholamines. Slope analysis and Job’s method confirmed formation of a 1:1 complex between the calix[6]arene and dopamine. On the other hand, the calix[8]arene extracts both dopamine and adrenaline, due to the large cavity for induced-fit recognition. Dopamine extracted with the calixarene is quantitatively stripped by contacting the organic solution with a fresh acidic solution.     

Rigid versus flexible: how important is ligand "preorganization" for metal ion recognition by lower rim-functionalized calix[4]arenes?

For an assessment of the outcomes from use of an appropriately "preorganized" calixarene-based ionophore versus its conformationally mobile prototype, solvent extraction propensities of flexible calix[4]arene di-[N-(X-sulfonyl)carboxamides] for alkali, alkaline earth metal cations, Pb2+, Ag+ and Hg2+ are compared with those for seven new rigid analogs fixed in the cone, partial cone and 1,3-alternate conformations. For each of the metal ions, the preferred calix[4]arene conformation was determined from the NMR spectra for the metal salt of the flexible ligand. Except for Ag+, flexible calix[4]arene di-[N-(X-sulfonyl)carboxamides] were found to provide greater metal ion extraction efficiency and better selectivity than the corresponding "preorganized" ionophores.     

Allosteric coextraction of sodium and metal ions with calix[4]arene derivatives 1

Solvent extraction of three alkali metal ions with p-t-octylcalix[6]arene hexacarboxylic acid, p-t-octylcalix[4]arene tetracarboxylic acid, corresponding linear trimeric and monomeric analogs was investigated. Cyclic tetramer selectively extracts sodium ion among alkali ions at extremely low pH, while the corresponding cyclic hexamer, the trimer, and the monomer exhibited only poor extraction ability for all alkali metals examined. The detailed extractive investigation of sodium ions with the cyclic tetramer was carried out. It was found that two sodium ions are simultaneously extracted by a single molecule of calix[4]arene derivative and that the second sodium extraction is facilitated by the uptake of the first sodium. The self-coextraction mechanism of sodium ions proposed in the present paper also strongly supports allosteric coextraction of sodium and other metal ions. In the competitive extraction of four alkali metal ions, potassium ion was slightly extracted as the second ion at low pH region, whereas it was hardly extracted in the individual extraction system. The result also supports the coextraction mechanism and role of the first-extracted sodium ion as an allosteric trigger. The extraction equilibrium constants of the cyclic tetramer and two sodium ions, K _ex1 and K _ex2, were estimated.     

Extraction Behavior of Amino Acids by Calix[6]arene Carboxylic Acid Derivatives

A series of calixarene carboxylic acid derivatives were synthesized for the extraction of amino acids. A calix[6]arene carboxylic acid derivative showed the highest extractability to the target tryptophan ester. The main driving forcefor the complexation was the interaction between the ammonium cation of the aminoacid and the oxygen atoms of the host molecule. Stripping of amino acids was alsoaccomplished by contacting the organic solution with a fresh acidic solution. Basedon slope and Job method analyses, it was confirmed that the calix[6]arene formsa 1 : 1 complex with the amino acid ester. The structure of the complex between the calix[6]arene and the amino acid was investigated by ¹H-NMR and CD spectra. The calix[6]arene includes a guest molecule in the cavity, and the inclusion induces the asymmetrization of the host molecule. This host compound functions as a novel recognition tool for amino acids.     

Phosphorus-based p-tert-butylcalix[5]arene ligands

New calix[5]arene trivalent phosphorus derivatives have been synthesized which should be excellent ligands with which to study and control the interaction of a ligand atom with a metal. The larger cavity of the calix[5]arene (compared to calix[4]arene) provides a good balance between constraint and flexibility. Treatment of p-tert-butylcalix[5]arene with 2 equiv of either tris(dimethylamino)phosphine or dichlorophenylphosphine inserts two RP moieties into the calix[5]arene framework to give calix[5](PR)2(OH) (1, R = Me2N; 2, R = Ph). Further treatment of 1 with 4 equiv of HCl gives calix[5](PCl)2(OH) (3). Heating a solution of the monophosphorus compound calix[5](PNMe2)(OH)3 (4) releases dimethylamine to yield both monomeric calix[5](P)(OH)2 (6) and dimeric [calix[5](P)(OH)2](2) (7), the latter having a tubelike geometry. X-ray crystallographic studies confirm the structures and show that 1 and 2 have approximate cone conformations while 3 has an approximate 1,2-alternate conformation. The orientations of the phosphorus lone pairs and oxygen atoms in all derivatives provide a framework for both soft and hard ligand interactions within the calix[5]arene.     

Selective extraction and recovery of cytochrome c by liquid-liquid extraction using a calix[6]arene carboxylic acid derivative

Recently, we reported that a calix[6]arene carboxylic acid derivative can selectively extract the lysine-rich protein cytochrome c by interacting with amino groups on the protein surface. In the present article, quantitative extraction and recovery of cytochrome c using this calix[6]arene carboxylic acid derivative are described. Both adjustment of the pH under acidic conditions and addition of an alcohol are necessary to strip the extracted protein from an organic solution to an aqueous solution. Separation of cytochrome c and lysozyme using the calix[6]arene was achieved under the optimal conditions. In the forward extraction stage, 93% of the cytochrome c was extracted, while lysozyme remained in the solution. In the subsequent stripping stage, the extracted cytochrome c was quantitatively recovered in an aqueous solution. Finally, separation of these proteins, which have similar molecular weights and isoelectric points, was accomplished.     

Liquid-liquid extraction of transition and alkali metal cations by a new calixarene: Diphenylphosphino calix[4]arene methyl ether

The liquid-liquid extraction of various metal ions by a diphenylphosphino calix[4]arene (1) using picrate counter ion has been studied and compared with those ofp-tert-butyl-calix[4]arene methyl ether (2) and triphenylphosphine (3). The calixarene 1 shows strong binding ability to almost all metal cations examined, but calixarene 2 shows little ability to extract any of them. Based on the continuous variation method, calixarene 1 formed 1: 2 complexes with copper(II) ion.     

Lower-rim versus upper-rim functionalization in di-ionizable calix[4]arene-crown-5 isomers. Synthesis and divalent metal ion extraction

Two series of di-ionizable calix[4]arene-crown-5 isomers in the cone conformation are synthesized to probe the effect of the pendant acidic group location on their metal ion extraction properties. In one series, the ionizable groups are attached to the lower rim of the calix[4]arene scaffold, which orients them near the crown ether cavity. In the second series, the ionizable groups are connected to the upper rim positioning them away from the crown ether ring, but close to the hydrophobic pocket of the calix[4]arene unit. The metal ion extraction behaviors of the two series of ligands are compared in extractions of alkaline earth metal cations, Hg²⁺, and Pb²⁺.     

Anion influence on extraction and transport of amino acid methyl esters by functionalised calix[4]arene

The liquid–liquid extraction of a series of amino acid methyl esters has been carried out with functionalised calix[4]arene (5,11,17,23-tetrakis(N-methylpiperazino)-25,26,27,28-tetrahydroxycalix[4]arene) from an aqueous phase into a chloroform phase as ion pairs in the presence of picrate ion or tropaeolin 00 as counter ion in order to study the molecular recognition properties of this receptor. The active transport assisted by pH gradient of amino acids as ion pairs through liquid membrane employing the functionalised calix[4]arene as carrier has been investigated. The results showed that the receptor exhibits good extractability towards amino acids and it can also act as carrier through liquid membrane aiming to the separation of amino acids. It was highlighted that the anion nature used as counter ion, the structure of calix[4]arene, and the structure of amino acids are responsible for the experimental results obtained. High yields in both amino acids extraction and transport were obtained for picrate ion used as counter ion.     

邻甲氧基羰基苄氧基取代杯[4]芳烃衍生物的合成及其性？…

杯芳烃是继冠醚、环糊精之后的第三代主体分子 [1] .据文献 [2 ,3]报道 ,在杯 [4]芳烃下沿酚氧原子上连接乙酸酯得到的四取代衍生物对 Na+ 有很高的选择性 ,核磁与晶体结构研究均证实这是由于羧酸酯的羰基和酚氧基参与了对 Na+ 的配位 ,而且配位基团所形成的包络空间大小与钠离子相匹配 .一般认为 ,随着包络空间改变 ,对金属离子的识别作用会有所变化[4] .但目前对这方面的工作并没有给予更多的重视 .我们发现 ,用 2 -溴甲基苯甲酸甲酯与杯 [4 ]芳烃反应 ,得到了一种新的四取代杯 [4]芳烃衍生物 2 ,萃取研究结果表明 ,该化合物对钾离子有较…     

Allosteric effect of the first lead ion on stepwise extraction of the second lead ion with p-t-butylcalix[5]arene pentacarboxylic acid derivative

A calix[5]arene-based solvent extraction reagent displaying very high selectivity for lead has been prepared, one molecule of which extracts two lead ions in a stepwise manner. The first Pb²⁺ ion is bound to five phenoxy oxygen atoms inside the calixarene cavity due to which the ligand undergoes conformational freezing in stable cone conformer. This causes positive allosteric effect for co-extraction of the second lead ion due to the aggregation of functional groups.     

Utilization of transport efficacy of novel calix[4]arene-embedded polymer inclusion membrane towards trace metals

In this study, 25,27-bis(3-mercaptopropoxyl)-26,28-dihydroxy calix[4]arene was successfully synthesized from the reaction of calix[4]arene-dialkylbromide derivative with thiourea. The structure of 25,27-bis(3-mercaptopropoxyl)-26,28-dihydroxy calix[4]arene was fully characterized using ¹HNMR, ¹³CNMR and elemental analysis techniques. The obtained mercapto-substituted calix[4]arene derivative was employed as an additive material along with cellulose triacetate (CTA) and 2-nitrophenyl octyl ether (o-NPOE) for the preparation of a novel polymer inclusion membrane (C@PIM). The structure and surface morphology of mercapto-substituted calix[4]arene-embedded polymer inclusion membrane was determined using thermogravimetric analysis, scanning electron microscopy and elemental analysis techniques. Donnan dialysis system was also used to assess the transport efficacy of C@PIM towards Pb(II), Zn(II), Cu(II), Ni(II), Cd(II) and Co(II) ions. The results show that new C@PIM exhibited 99% transport efficacy but also selectivity toward Ni(II) and other ions.     

First synthesis and structure of beta-ketoimine calix[4]arenes: complexation and extraction studies

The synthesis of a new series of beta-ketoimine calix[4]arene derivatives is described. The reaction of calix[4]arene or p-tert-butylcalix[4]arene with bromoacetonitrile or bromobutyronitrile afforded di-, tri-, and tetranitrile calixarene derivatives (3-8, 3a), which were then reduced into the corresponding amine (9-13, 3b). The condensation of these aminocalixarenes with acetylacetone led to six beta-ketoimine calix[4]arene derivatives (14-18, 3c) as a class of selective receptors toward transition metals. Molecular structures of 4, 7, and 17 have been determined by X-ray diffraction. The packing of 17 revealed a network of intramolecular and intermolecular hydrogen bonds. The complexation properties of receptors 15, 17, and 3c toward different metal ions have been investigated by UV-vis titrations in organic media. The stoichiometries of complexes with 17 were determined by both the mole ratio method and Job plots. These novel receptors selectively complex Cu2+, Hg2+, and Ag+. Moreover, the extraction properties of 17 toward cations have been studied by liquid-liquid extraction and atomic absorption spectrometry. Compound 17 has good affinity and selectivity toward Pb2+.     

Deoxycholate as an efficient coating agent for hydrophilic silicon nanocrystals

A layer of macrocyclic calix[4]arene derivatives has been grafted on the internal surface of the mesochannels of the ordered mesoporous SBA-15 to develop highly efficient trap for heavy transition metal (HTM) ions. To ensure the successful anchoring of calix[4]arene derivatives on the surface of SBA-15, two different types of calix[4]arene derivatives, one with one trimethoxysilane functional group and another with two trimethoxysilane functional groups have been explored. XRD, N(2) adsorption and TEM results provide strong evidence that the mesoporous structure of the supporting materials retain their long range ordering throughout the grafting process. Solid-state NMR, TG and FT-IR spectroscopy indicate that both types of calix[4]arene derivatives can be well-anchored on the surface of the wall of SBA-15. Calix[4]arene derivative with only one trimethoxysilane functional group showed high grafting efficiency compared to that with two trimethoxysilane functional groups due to the intramolecular and intermolecular polycondensation between two trimethoxysilane functional groups. The HTM ions extraction capacity in aqueous solution of macrocycle functionalized SBA-15 nanohybrides for a series of HTM ions has been studied. The obtained materials demonstrated very high HTM ions extraction capacity up to 96% for Pb(2+) in aqueous solution.     

DFT-calculated structure of protonated tetraphenyl p - tert -butylcalix[4]arene tetraketone

Using DFT calculations, two of the most probable structures (A, B) of the tetraphenyl p-tert-butylcalix[4]arene tetraketone·H₃O⁺ cationic complex species were derived. The hydroxonium ion H₃O⁺, placed in the coordination cavity formed by the calix[4]arene lower-rim groups, is bound by strong hydrogen bonds to the phenoxy oxygen atoms of the calix[4]arene ligand (structures A, B) and also to one carbonyl oxygen (structure B).