Alkali (alkaline-earth) metal,aluminum, and titanium complex orthophosphates: Synthesis and characterization

Phase formation in the A_{1 + x} Al _x Ti_{2 ? x} P₃O₁₂ (A = Li, Na, K, Rb, or Cs; 0 ≤ x ≤ 2.0) and B_{0.5(l + x)}Al _x Ti_{2 ? x} P₃O₁₂ (B = Mg, Ca, Sr, or Ba; 0 ≤ x ≤ 2.0) systems was studied using X-ray powder diffraction, electron probe microanalysis, and IR spectroscopy. The following double and triple orthophosphates were found to exist: A_{1 + x} Al _x Ti_{2 ? x} (PO₄)₃ with A = Li (0 ≤ x ≤ 0.3), Na (0 ≤ x ≤ 1.0), K (x = 0, 1.0, or 2.0), Rb (x = 0, 1.0, or 2.0), or Cs (0 ≤ x ≤ 1.0) and B_{0.5(l + x)}Al _x Ti_{2 ? x} (PO₄)₃ with B = Mg and Ba (x = 0), Ca and Sr (0 ≤ x ≤ 0.2). These orthophosphates crystallize in the structure types of kosnarite, langbeinite, cesium titanium arsenate, potassium aluminum phosphate, or rubidium aluminum phosphate. Their crystal parameters were calculated. For CsTi₂(PO₄)₃ (x = 0), Rietveld refinement was carried out: space group Ia \(\bar 3\) d, Z = 32, a = 19.909(5) Å, V = 7892(1) ų. This compound has a framework structure. The framework is built of TiO₆ octahedra and PO₄ tetrahedra; eight- and 12-coordinated Cs⁺ cations populate interstices.     

Isomorphic substitution of neodymium and gadolinium for calcium in synthetic hydroxovanadate

Isomorphic substitution of neodymium and gadolinium for calcium in synthetic hydroxovanadate Ca_{5 ? x} M _x (VO₄)₃(OH)_{1 ? x} O _x (M = Nd, Gd) is studied in the range 700–1000°C using X-ray powder diffraction, single-crystal X-ray diffraction (Rietveld technique), and IR spectroscopy. Single-phase solid solutions at 800°C are formed with x ≤ 0.35 for M(III) = Nd and x ≤ 0.3 for M(III) = Gd. With high x, the apatite solid solution coexists with Ca₃(VO₄)₂, Nd₂O₃, and X phases. With increasing x in the homogeneous region, the intensity of the bands of stretching vibrations and librations of OH groups decrease. Single-crystal X-ray diffraction shows that neodymium and gadolinium substitute for calcium in solid solutions mostly in Ca(2) positions.     

Subsolidus phase relations in the Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-Li<Subscript>2</Subscript>O-Ta<Subscript>2</Subscript>O<Subscript>5</Subscript> (Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>) systems

The phase composition has been studied and an equilibrium phase diagram has been designed for the Al₂O₃-Li₂O-R₂O₅ (R = Ta or Nb) systems in the subsolidus region up to 1000°C and 85 mol % Li₂O. New phases with the composition Li_1+x Al_1?x O_2?x , where x = 0–0.67, have been found.     

Phase formation in the Ag<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-MgMoO<Subscript>4</Subscript>-Al<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript> system

The subsolidus region of the Ag₂MoO₄-MgMoO₄-Al₂(MoO₄)₃ ternary salt system has been studied by X-ray phase analysis. The formation of new compounds Ag_{1 ? x} Mg_{1 ? x} Al_{1 + x} (MoO₄)₃ (0 ≤ x ≤ 0.4) and AgMg₃Al(MoO₄)₅ has been determined. The Ag_{1 ? x} Mg_{1 ? x} Al_{1 + x} (MoO₄)₃ variable-composition phase is related to the NASICON type structure (space group R \(\bar 3\) c). AgMg₃Al(MoO₄)₅ is isostructural to sodium magnesium indium molybdate of the same formula unit and crystallizes in triclinic system (space group P \(\bar 1\), Z = 2) with the following unit cell parameters: a = 9.295(7) Å, b = 17.619(2) Å, c = 6.8570(7) Å, α = 87.420(9)°, β = 101.109(9)°, γ = 91.847(9)°. The compounds Ag_{1 ? x} Mg_{1 ? x} Al_{1 + x} (MoO₄)₃ and AgMg₃Al(MoO₄)₅ are thermally stable up to 790 and 820°C, respectively.     

Stoichiography in the study of spatial heterogeneity of the chemical composition and structure of thin films and nanostructured systems

We present the principles of stoichiography and a reference-free stoichiographic differential (separating) dissolution method used to study the composition and structure of thin films and nanostructured systems: HTS films with 123 different compositions, Al–Au–Sn–Co–Mn, Si/SiO₂/Ni(Cr)–Cu–Cu2S, Cr–Cu–S, and Cu–S multilayer films, Bi–Ti–O films on Ru/SiO₂/Si, Mn_1–xZn _x S, and ZnS–EuS supports, and also nanostructured manganese ferrite in borate glass matrices, nanodisperse composite sorbents and the Co–Si–Pt–O/Al₂O₃ catalyst modified by Pt nanoparticles, and oxide catalyst precursor Fe₂Co/Al₂O₃ for the synthesis of carbon nanotubes.     

Crystal chemical analysis of natural clay material of different genesis

Crystal chemical analysis of natural clay material that formed under different physicochemical parameters shows that the analyzed samples are represented in series I by almost pure smectite (K,Na,Mg,Ca) _x ·nH₂O·(Fe,Mg)₂(Si,Al,Fe)₄O₁₀(OH)₂, in series II by smectite with a small impurity (~15%) of quartz (SiO₂) and plagioclase (NaAlSi₃O₈/CaAl₂Si₂O₈). The studies are performed by X-ray diffraction, IR spectroscopy, electron microscopy, and microprobe analysis. It is shown that the values of d001 basal reflections of the smectites in question within 11–13 Å are due to the degree of cation occupation and hydration of the interlayer space, and differences in the frequencies of IR spectra are caused by isomorphic substitutions in the structure. Microprobe analysis results, calculated crystal chemical formulas, and values of b parameters are held only for the extreme terms in a series of dioctahedral ferric smectites: nontronites. The results reveal differences both in the composition, structure, properties, morphology and IR spectroscopic characteristics of nontronites of different origin.     

The effect of phosphate group replacement by sulfate groups on the phase formation in the synthesis of hydroxyapatite

Sulfate-substituted hydroxyapatite materials with a degree of substitution of up to 20 mol % (Ca₁₀(PO₄)_{(6 – 0.06x)}(SO₄)_0.09x (OH)₂, x = 0, 0.1, 0.5, 1, 5, 10, and 20) were synthesized. For substitutions of 0, 0.1, 0.5, and 1 mol %, a single-phase material with the apatite structure is formed. On further increase in the concentration of SO₄ ^2? groups up to 20 mol %, a second phase, CaSO₄, is formed; the amount of this phase increases for higher degrees of substitution. The unit cell parameters of hydroxyapatite-based materials change slightly upon the replacement of phosphate groups by sulfate groups: the parameter a tends to increase, while c tends to decrease. The introduction of sulfate groups results in decreasing particle size.     

Synthesis of boehmite and hematite by joint hydrolysis of carbamide,aluminum chloride,and iron(III) chloride under hydrothermal conditions

The formation of boehmite and hematite in dependence of the conditions of joint hydrothermal hydrolysis of carbamide and a mixture of aluminum and iron(III) chlorides in the presence of K, Na, Ca, and Mg chlorides at T = 160–200°C and P = 0.6–1.6 MPa was studied. It was shown that the amount of boehmite and hematite being formed in hydrolysis of Al and Fe chlorides strongly depends on pressure, temperature, hydrolysis duration, and composition of the model mixture of Al, Fe, Mg, Ca, K, and Na chlorides. It was found that a complete hydrolysis of AlCl₃ and FeCl₃ with 99% yield of boehmite and hematite occurs at the stoichiometric ratio between carbamide and aluminum and iron chlorides in the starting solution, whereas mostly iron oxyhydroxide [goethite FeO(OH)] and aluminum oxychloride [Al₁₇O₁₆(OH)₁₆Cl₃] are formed at nonstoichiometric ratios.     

<Emphasis Type="Italic">In situ</Emphasis> XPS study of the size effect in the interaction of NO with the surface of the model Ag/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/FeCrAl catalysts

The interaction of NO with the surface of model Ag/Al₂O₃/FeCrAl catalysts containing Ag nanoparticles of different size (1 and 3 nm) was studied. The use of the Auger parameter α_Ag (E _b(Ag3d_5/2) + E _kin(Ag MVV)) made it possible to reliably identify the change in the chemical state of silver cluster upon their interaction with О₂ and NO. The oxygen treatment leads to the oxidation of small Ag nanoparticles (1 nm) and formation of AgO _x clusters resulted in the intensive formation of nitrite—nitrate structures on the step of the interaction with NO. These structures are localized on both the silver clusters and Al₂O₃ surface. An increase in the size of Ag⁰ nanoparticles to 3 nm results in an increase in the stability of these structures and impedes the Ag⁰ → AgO _x transition, due to which the formation of surface groups NO₂ ^–/NO₃ ^– is suppressed. The data obtained make it possible to explain the dependence of the activity of the Ag/Al₂O₃ catalysts in the selective reduction of NO on the Ag nanoparticle size.     

New Phosphate-Sulfates with NZP Structure

NaZr_2–xB_x(PO₄)_3–2x(SO₄)_2x (0 ≤ x ≤ 1.25, B = Mg, Co, Ni, Cu, Zn), and NaZr_2–xR_x(PO₄)_3–x(SO₄)_x (0 ≤ x ≤ 1.25, R = Al, Fe) phosphate-sulfates series have been prepared by a sol–gel process. These compounds belong to the NaZr₂(PO₄)₃ (NZP) structure family and crystallize in hexagonal crystal system, space group R\(\bar 3\)c. Limited solid solution series were found to exist; their formation temperatures and thermal stability limits were determined. Particle sizes as determined by microstructure observation were 50–200 nm, and for Cu- and Zn-containing samples, 200–500 nm. The thermal expansion of phosphate-sulfate NaZr_1.25Cu_0.75(PO₄)_1.5(SO₄)_1.5 was studied in the range 25–700°C. Thermal expansion coefficients and thermal expansion anisotropy were found to be α_a =–5.40 × 10^–6 °C^–1, α_с = 18.88 × 10^–6 °C^–1, α_avg = 2.69 × 10^–6 °C^–1, and Δα = 24.28 × 10^–6 °C^–1.     

Tuning the ferromagnetic resonance by doping strontium hexa-ferrite nanopowders

Mg–Ti substituted strontium hexa-ferrites nanopowders (SrFe_12?x(MgTi)_x/2O₁₉, x?=?0–3) were prepared by the sol–gel method. The morphology, structure and composition of the nanostructures were examined by field emission scanning electron microscopy (FESEM) and X-ray diffraction. The effect of Mg–Ti doping on the magnetic properties of the powders was investigated by vibrating sample magnetometry (VSM) and ferromagnetic resonance (FMR) at ambient temperature. Experimental results showed that the materials exhibit hexagonal structures with tunable magnetic properties. The saturation magnetization and the coercive field (H_c) decreased through the Mg and Ti substitution. FMR proved that by incorporation of Mg and Ti in strontium ferrite lattice, crystalline anisotropy, and microwave absorption can be tuned. SrFe_12?x(MgTi)_x/2O₁₉ ferrites are good candidate for applications at X-band microwave frequencies. A low field absorption signal was observed with the same phase as the FMR absorption in all doped ferrites.

Open image in new window

     

An XPS study of the oxidation of noble metal particles evaporated onto the surface of an oxide support in their reaction with NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>

The interaction of the model catalysts Rh/Al₂O₃, Pd/Al₂O₃, Pt/Al₂O₃, and Pt/SiO₂ with NO _x (mixture of 10 Torr of NO and 10 Torr of O₂) was studied by X-ray photoelectron spectroscopy (XPS). Samples of the model catalysts were prepared under vacuum conditions as oxide films ≥100 Å in thickness on tantalum foil with evaporated platinum-group metal particles. According to transmission electron microscopic data, the platinum-group metal particle size was several nanometers. It was found by XPS that the oxidation of Rh and Pd nanoparticles in their interaction with NO _x occurs already at room temperature. The particles of platinum were more stable: their oxidation under the action of NO _x was observed at elevated temperatures of ～300°C. At room temperature, the interaction of platinum nanoparticles with NO _x hypothetically leads to the dissolution (insertion) of oxygen atoms in the bulk of the particles with the retention of their metallic nature. It was found that dissolved oxygen is much more readily reducible by hydrogen than the lattice oxygen of the platinum oxide particles.     

Effects of base composition and dopants on the properties of hexagonal ferrites

The effects of the base composition and dopants on the saturation magnetization and coercivity of hexaferrites BaAl_xFe_12–xO₁₉, SrAl_xFe_12–xO₁₉, BaGa_xFe_12–xO₁₉, SrGa_xFe_12–xO₁₉, BaSc_xFe_12–xO₁₉ and SrSc_xFe_12–xO₁₉ have been studied. Isomorphic substitutions of Al₂O₃, Ga₂O₃, and Sc₂O₃ for Fe₂O₃ in barium and strontium ferrites are found to increase coercivity due to increasing crystallographic anisotropy constant and to reduce the saturation magnetization value. Processes controlling microstructure formation, specifically recrystallization processes, are shown to have a noticeable effect on the level of properties of the ferrites under study with the use of dopants. The most efficient dopants are boron, calcium, and silicon oxides, which provide the formation of relatively fine-grained structures. The increased coercivity upon doping with these dopants is also due to the formation of grain-boundary interlayers of a nonmagnetic glassy phase and the associated efficient retardation of moving domain walls.     

Adsorption properties of aluminium oxide modified with palladium,gold, and cerium oxide nanoparticles

The adsorption properties of nanocomposites based on γ-Al₂O₃ modified with CeO_x, Au/CeO_x, and Pd/CeO_x nanoparticles with contents of deposited metals ranging from 0.07 to 1.71 wt % are investigated by means of dynamic sorption method. n-Alkanes (C₆–C₈), acetonitrile, diethyl ether, tetrahydrofuran, and dioxane are used as test adsorbates. Adsorption isotherms are measured, and the isosteric heats of adsorption of a number of test adsorbates are calculated. Electron-donor and electron-acceptor characteristics of the surfaces of γ-Al₂O₃-based nanocomposites are estimated. It is shown that Au(0.1%)/CeO_x(0.07%)/γ-Al₂O₃ nanocomposite, which has the lowest content of nanoparticles of the deposited metals, has the highest adsorption activity.     

Study of the factors affecting the formation of copper–chromium/aluminum oxide compounds with a spinel structure

The effect of the Cr³⁺/Al³⁺ ratio on the crystallization temperature of mixed oxide compounds with a spinel structure and their structural features and morphological characteristics have been studied using a combination of physicochemical methods: thermal analysis, IR spectroscopy, X-ray powder diffraction, and electron microscopy. The role of temperature of synthesis and drying of Cu–Cr/Al hydroxy precursors in the formation of copper-containing spinels CuCr _x Al_2–x O₄, where x = 0–2, has been elucidated. The results are of interest for selection of the optimal composition and conditions of synthesis and formation of copper-containing spinels for their practical use.     

Sulfonic acid-functionalized titanomagnetite nanoparticles as recyclable heterogeneous acid catalyst for one-pot solvent-free synthesis of 3,4-dihydropyrimidin-2(1<Emphasis Type="Italic">H</Emphasis>)-ones/thiones

Sulfonic acid-functionalized titanomagnetite (Fe_3?x Ti _x O₄@SO₃H) nanoparticles were prepared by grafting sulfonic acid groups on Fe_3?x Ti _x O₄ nanoparticles. This new heterogeneous acid nanocatalyst demonstrated an efficient catalytic performance in the one-pot synthesis of dihydropyrimidin-2(1H)-one/thione derivatives under solvent-free conditions with high yields. The nanocatalyst could easily be separated from the reaction mixture simply by using an external magnet, recycled and reused for several times with no significant loss of catalytic activity. These nanoparticles were characterized by different physicochemical techniques, such as Fourier transform infrared, scanning electron microscopy, energy-dispersive X-ray analysis, thermogravimetric and vibrating sample magnetometer (VSM) analyses.     

Substitution of barium for strontium in hydroxovanadate structure

A possibility of substitution of barium for strontium in Sr₁₀(VO₄)₆(OH)₂ is studied by X-ray powder diffraction and IR spectroscopy. According to X-ray powder diffraction data, single-phase solid solutions Sr_{10 ? x} Ba _x (VO₄)₆(OH)₂ are formed with x = 0–2.5 with an increase in the unit cell parameters.     

Preparation of mesoporous Ce<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Fe<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>2</Subscript> mixed oxides and their catalytic properties in methane combustion

Mesoporous Ce_{1 ? x} Fe _x O₂ mixed oxide catalysts of different molar ratios (x = 0.1–0.5) were prepared by the citric acid sol-gel method and the microwave technique. The activities of Ce_{1 ? x} Fe _x O₂ mixed oxides on methane combustion were investigated, and the structure and reductive properties were characterized by XRD, BET, DRS, and TPR. The data showed that Ce_{1 ? x} Fe _x O₂ mixed oxides prepared were mesoporous material. When x ≤ 0.2, the transition metal Fe incorporated into the lattice of CeO₂ to form cubic Ce_{1 ? x} Fe _x O₂ solid solutions, and mixed phases of cubic Ce_{1 ? x} Fe _x O₂ solid solutions and α-Fe₂O₃ existed when x > 0.2. Ce_{1 ? x} Fe _x O₂ solid solutions show higher activity for methane combustion than pure CeO₂, especially for Ce_0.9Fe_0.1O₂.     

Bismuth aluminoborate Bi<Subscript>0.96</Subscript>Al<Subscript>2.37</Subscript>(B<Subscript>4</Subscript>O<Subscript>10</Subscript>)O: Synthesis and crystal structure

The crystal structure of a new bismuth aluminoborate Bi_0.96Al_2.37(B₄O₁₀)O is studied by single-crystal X-ray diffraction. The Bi_0.96Al_2.37(B₄O₁₀)O single crystals are hexagonal (space group \(P\bar 6\) 2m). The unit cell parameters are as follows: a = b = 4.587(4) Å, c = 2.253(9) Å, α = β = 90°, γ = 120°, V = 168.60 ų, Z = 1.     

Systems Li<Subscript>2</Subscript>O(Na<Subscript>2</Subscript>O)-CdO-V<Subscript>2</Subscript>O<Subscript>5</Subscript>: Phase composition and phase diagrams

The subsolidus phase composition of the M₂O-CdO-V₂O₅ systems with M = Li or Na is studied. Double orthovanadates MCdVO₄ and MCd₄(VO₄)₃ form solid solutions of composition Li_{1 ? 2x/3}Cd _x/3CdVO₄ (0 ≤ x ≤ 1, orthorhombic space group Cmcm, modulation at x = 0.6) and Na_{3 ? 2x} Cd_{3 + x} (VO₄)₃ (0 ≤ x ≤ 0.10 and 0.30 ≤ x ≤ 1, orthorhombic space group Cmcm and Pn2₁ a or Pnma, respectively). In the range 0.10 < x < 0.30, the end-members of the solid solutions coexist. Isothermal sections of the systems are mapped.