Magnetic and optical properties of Zn1– x Fe x O ( x = 0.05 and 0.10) diluted magnetic semiconducting nanoparticles

We have investigated the magnetic and optical properties of chemically low temperature-synthesized Zn_{1– x} Fe _x O (x = 0.05 and 0.10) diluted magnetic semiconducting nanoparticles (～7 nm). Observed magnetic behaviour of x = 0.05 samples showed that the net magnetic interaction was antiferromagnetic-like, a feature established by Curie–Weiss fit, concave Arrott–Belov–Kouvel (ABK) plots with the absence of spontaneous magnetization even at 5 K and stretched exponential-type time-dependent magnetization behaviour. Optimization of the Fe(x) dopant concentration in Zn_{1– x} Fe _x O gave the most favourable room-temperature ferromagnetism for x = 0.10, as supported by finite coercive field (～94.4 Oe) and remanent magnetization (0.011 µ_B/Fe ion) from strong hysteretic magnetization vs. magnetic-field curves at room temperature. The Curie temperature of the x = 0.10 sample was estimated at ～388 K. The existence of a room-temperature ferromagnetic phase was further established by the convex nature of the ABK plots with finite spontaneous magnetization. The observed magnetic behaviour for different x values is best explained by a magnetic polaron model.     

Structural and electronic properties of InNxP1-x alloy in full range (0 ≤ x ≤1)

We have performed first-principles method to investigate structural and electronic properties of InN_xP_1?x ternary semiconductor alloy in full range (0 ≤ x ≤ 1) using density functional theory. We have used modified Becke–Johnson potential to obtain accurate band gap results. From the electronic band structure calculation we have found that InN_xP_1?x become metal between 47 and 80% of nitrogen concentration. Additional to our band gap calculations, we have also used the band anticrossing model. The band anticrossing model supplies a simple, analytical expression to calculate the physical properties, such as the electronic and optical properties, of III-N_xV_1?x alloys. The knowledge of the electron density of states is required to understand and clarify some properties of materials such as the band structures, bonding character and dielectric function. In order to have a deeper understanding of these properties of the studied materials, the total and partial density of states has been calculated. Finally, we have calculated the total bowing parameter b of studied alloys, together with three contributions b_VD, b_CE, and b_SR due to volume deformation, different atomic electron negativities and structural relaxation, respectively.     

Structural characterization,magnetic properties and magnetocaloric effects of La0.75Sr0.25Mn1–x Cr x O3 (x = 0.15, 0.20, and 0.25)

The effect of Cr doping on the structural, magnetic and magnetocaloric properties of perovskite manganites La_0.75Sr_0.25Mn_1–x Cr _x O₃ (x = 0.15, 0.20, and 0.25) has been investigated. Crystalline structure and magnetic properties are investigated by using X-ray powder diffraction and magnetization measurements, respectively. All samples show a single phase and are found to crystallize in the distorted rhombohedral system with \( R\overline{3} \,c \) space group. A monotonous change of Curie temperature (T _C), from 314 to 253 K, is observed when content doping increases. Substantial magnetic entropy change reaching 4.20 J/kg K is revealed. Relative cooling power was estimated as well. It was found to reach 289, 323, and 386 J/kg for x = 0.15, 0.20, and 0.25, respectively. Field dependence of the magnetic entropy change showing the power law dependence \( \Delta S_{\rm M} \propto \,\,\left( {\mu_{ 0} \rm H} \right)^{n} \) is also analyzed and discussed.     

Structure and superconductivity studies on (Y1-xLa x )Ba2Cu3O7 (0 ≤ x ≤ 1)

Studies on (Y_{1 - x}La _X )Ba₂Cu₃O₇, x = 0.0 - 1.0, in steps of 0.1, have been carried out. Results show that for x ≤ 0.4, orthorhombicity and high T_c of 90 K are retained. T_c decreases gradually for x ≥ 0.4. Pure LaBa₂Cu₃O₇ shows a T_C ^ZERO of 73 K. XRD data do not reveal any clearcut orthorhombic distortion for pure LaBa₂CuO₇ after annealing at 350°C for 4 days.     

Structure and magnetic properties of Fe96−x Zr x B4 nanowire arrays

Fe96-xZrx B4(1相似文献   

Features of magnetic properties of La x MnO3 + δ (0.815 ≤ x ≤ 1.0)

Magnetic and resonance studies of the system of polycrystalline samples of self-doped manganites La _x MnO_{3 + δ} (x = 0.815, 0.90, 0.94, 0.97, and 1.0) have been performed in a temperature range of 77–300 K. According to ⁵⁵Mn NMR data, all samples contain a ferromagnetic phase at 77 K. As the defect density increases (x changes from 1.0 to 0.815), samples become more magnetically ordered. In this case, the ferromagnetic state of the system gradually changes from a mixed state in which both ferromagnetic insulating (basic) and ferromagnetic metal (for x = 0.97 and 1.0) phases coexist to only the ferromagnetic metal state (for x = 0.815 and 0.90). It has been shown that both ferromagnetic metal and ferromagnetic insulating phases are inhomogeneous, and either phase consists of two phases with different dynamics of nuclear spins and different Curie temperatures. The diagram of the magnetic phase state of the La _x MnO_{3 + δ} system (x = 0.815, 0.90, 0.94, 0.97, 1.0) has been constructed for a temperature range of 120–240 K and Mn⁴⁺ contents of 12–30%.     

Magnetic properties of U (Fe x Al1−x )2 and U(Fe y Ni1−y )2 compounds

The results of magnetic measurements and ferromagnetic resonance studies performed on U(Fe _x Al_1–x )₂ and U(Fe _y Ni_1–y )₂ compounds over a large temperature range are reported. The saturation magnetization decreases nearly linearly when substituting Fe by Al or Ni. In the composition range x<0.84 and y<0.81, the compounds are Pauli paramagnets, except in the region with y0.10. For UNi₂ two types of magnetic behaviours are shown. This compound can be both a ferromagnet withT _c =23.5 K and a Pauli paramagnet, depending on the crystal structure. Above the Curie temperatures, the reciprocal susceptibility for the compounds with x>0.84 and y>0.81 obeys a temperature dependence of the formX=X _o+C(T-) ^–1. The effective iron moments decrease when substituting iron by nickel or aluminium. The ferromagnetic resonance measurements show that theg values are not composition-dependent. A linear variation of the mean iron magnetization with the exchange field is observed. Finally, the magnetic behaviour of iron in these compounds is analysed.     

On Possible States of the Crystal Structure Preceding to a Phase Transition in Zn1 – xVxSe (0.01 ≤ x ≤ 0.10) Crystals

Physics of the Solid State - The systematic new formations observed in the reciprocal lattice of the cubic structural modification of a II–VI compound are characterized using a detailed...     

Sol–gel deposition and luminescence properties of lanthanide ion-doped Y2(1-x)Gd2xSiWO8 (0≤x ≤1) phosphor films

Y_2(1-x)Gd_2xSiWO₈:A (0x1; A=Eu³⁺, Dy³⁺, Sm³⁺, Er³⁺) phosphor films have been prepared on silica glass substrates through the sol–gel dip-coating process. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric and differential thermal analysis (TG-DTA), atomic force microscope (AFM), scanning electron microscopy (SEM) and photoluminescence spectra as well as lifetimes were used to characterize the resulting films. The results of the XRD indicated that the films began to crystallize at 800 °C and crystallized completely at 1000 °C. The AFM and SEM study revealed that the phosphor films, which mainly consisted of closely packed grains with an average size of 90–120 nm with a thickness of 660 nm, were uniform and crack free. Owing to an efficient energy transfer from the WO₄^2- groups to the activators, the doped lanthanide ion (A) showed its characteristic f–f transition emissions in crystalline Y_2(1-x)Gd_2xSiWO₈ (0x1) films. The optimum concentrations for Eu³⁺, Dy³⁺, Sm³⁺, Er³⁺ were determined to be 21, 5, 3 and 7 mol % of Y³⁺ in Y₂SiWO₈ films, respectively. The above lanthanide ions showed higher emission intensity for 02(1-x)Gd_2xSiWO₈ films. PACS 73.63.Bd; 78.55.Hx; 78.66.Nk; 81.15.Lm; 81.20.Fw     

Structure,stability and magnetic properties of (NiAl)n(n≤6) clusters

In this paper, density functional theory with generalized gradient approximation (GGA) for the exchange-correlation potential has been used to calculate the energetically global-minimum geometries and electronic states of (NiAl)_n(n≤6) clusters. Full structural optimizations, analysis of energy and frequency calculation are performed. The most stable structures of (NiAl)_n clusters are all three-dimensional structures except NiAl. The average bond lengths of (NiAl)_n clusters are larger than that of Ni_2n, and are smaller than that of Al_2n. The binding energy per atom of Ni_2n and (NiAl)_n has the same change trend, and that are larger than that of Al_2n. Stability analysis shows that Ni₈, (NiAl)₂ and Al₁₀ clusters have higher relative stability than other clusters. Mulliken analysis indicates that charges always transfer from Al atoms to Ni atoms, and the average charges of transfer from Al atoms to Ni atoms have a maximum at (NiAl)₆, implying the strong interaction between Al and Ni atoms in (NiAl)₆. The average atomic magnetic moments of (NiAl)_n are smaller than that of true Ni_2n. The analysis of the static polarizability shows that the electronic structures of (NiAl)_n clusters tend to be compact with the increase of atoms.     

Electrical transport properties of YCo_(1-x)Mn_xO_3(0 ≤x≤ 0.2)prepared by sol–gel process

Mn substitution compounds YCo1-xMnx O3(0 ≤ x ≤ 0.2) are synthesized by using the sol–gel process. Electrical transport properties of YCo1-xMnx O3 are investigated in the temperature range from 200 K to 780 K. The experimental results show that after Mn substitution the electrical resistivity of YCo1-xMnx O3 first increases, then decreases, which is due to the electrons introduced by Mn doping. The sign of Seebeck coefficient for YCo1-xMnx O3(x = 0) is positive or negative, which is also proved by the Hall coefficient measurement. Moreover, at about room temperature, the Seebeck coefficient of YCo1-xMnx O3 with 1% doping Mn content becomes a negative value, whose absolute value is maximum;furthermore, the absolute value gradually decreases with increasing the Mn substitution content, which can be explained by the double carrier model.     

Magnetic properties of (Mn1 − x Fe x )1.68Sn solid solutions

Solid solutions in the (Mn_{1 ? x} Fe _x )_1.68Sn system (x ≤ 0.5) with a Ni₂In-type structure are synthesized by the solid-phase reaction method in a stepwise temperature regime. The unit cell parameters a and c decrease with an increase in the iron concentration in the alloys and become equal to a = 0.430 nm and c = 0.538 nm for the (Mn_0.5Fe_0.5)_1.68Sn alloy. A superstructure with the unit cell parameters a _ss = 3a and c _ss = c is revealed in alloys of the system under investigation. The specific magnetization of the alloys increases nonlinearly from 53 G cm³ g^?1 in the Mn_1.68Sn alloy to 72 G cm³ g^?1 in the (Mn_0.5Fe_0.5)_1.68Sn solid solution. The Curie temperature changes from 270 K in the initial alloy of the composition Mn_1.68Sn to 365 K in the alloy of the composition (Mn_0.5Fe_0.5)_1.68Sn. All solid solutions in the (Mn_{1 ? x} Fe _x )_1.68Sn (x ≤ 0.5) system exhibit metallic conductivity in the temperature range from 77 to 450 K.     

Structure and dielectric properties of solid solutions Bi7Ti4 + x W x Ta1–2x O21 (x = 0–0.5)

A number of solid solutions Bi₇Ti_{4 + x} W _x Ta_1–2x O₂₁ (x = 0–0.5) have been synthesized from oxides by solid-phase reaction. The crystal structure, the electrophysical characteristics, and the microstructure of the prepared ceramic samples have been studied. According to X-ray powder diffraction, all the compounds are single-phase with the structure of mixed-layer Aurivillius phases (m = 2.5) with the orthorhombic crystal lattice (space group I2cm, Z = 2). Temperature dependences of the relative permittivity ε(T) of the compound have been measured, from which it has been found that the Curie temperature T _C of perovskite-like oxides Bi₇Ti_{4 + x} W _x Ta_1–2x O₂₁ (x = 0–0.5) decreases linearly as substitution parameter x decreases. The activation energies of charge carriers have been found in different temperature ranges.     

Synthesis and native defectivity of Zn1−x V x O (0 ≤ x ≤ 0.03) photocatalysts

Nanodisperse solid solutions Zn_1?x V _x O (0 ≤ x ≤ 0.03) with high numbers of defects in an oxygen sublattice are synthesized via the precursor technique. ESR analysis reveals that V _O ⁺ oxygen vacancies are the main defects of the oxygen sublattice in the Zn_1?x V _x O structure. The Zn_1?x V _x O (0 < x ≤ 0.15) solid solutions exhibit high photocatalytic activity during hydroquinone oxidation in water upon irradiation with UV and visible light.     

Composition-related structural,thermal and mechanical properties of Ba1−xSrxTiO3 ceramics (0 ≤ x ≤ 0.4)

The Ba_1?xSr_xTiO₃ (BST) ceramics were prepared by conventional ceramic method. The crystalline structure and morphology were studied by X-ray diffraction and scanning electron microscopy, respectively. Experimental results show that increase of sintering temperature leads to an uncontrolled precipitating of the phase with a lower content of Ti. The dielectric constant and specific heat as a function of composition and temperature were investigated. The increasing concentration of Sr ions leads to a shift of the Curie point below room temperature. To determine the elastic constants (the Young's modulus E, the shear modulus G and the Poisson's ratio v) of BST, a method of measurement of the longitudinal (ν_L) and transverse (ν_T) ultrasonic wave velocities for this type of material was developed. The structural, dielectric and mechanical properties of BST ceramics were discussed in terms of microstructure and chemical composition     

The influence of praseodymium concentration on the luminescence properties of Ca1 ? x Pr x F2 + x (0.002 ≤ x ≤0.35)

The possibility of implementing photon cascade emission in CaF₂-PrF₃ crystals by increasing the PrF₃ concentration in the CaF₂ matrix is studied. It is shown that an increase in the Pr³⁺ content leads to redistribution of radiative transitions in favor of the ¹ S ₀-luminescence. The decrease in the efficiency of the second step of photon cascade emission at high PrF₃ concentrations is caused by quenching of the ³ P ₀ ?? 4f ² transitions as a result of cross relaxation.     

First-principles study of the structural and elastic properties of AuxV1–x and AuxNb1–x alloys

Ab initio total energy calculations, based on the Exact Muffin-Tin Orbitals (EMTO) method in combination with the coherent potential approximation (CPA), are used to calculate the total energy of Au_xV_1–x and Au_xNb_1–x random alloys along the Bain path that connects the body-centred cubic (bcc) and face-centred cubic (fcc) structures as a function of composition x (0 ≤ x ≤ 1). The equilibrium Wigner–Seitz radius and the elastic properties of both systems are determined as a function of composition. Our theoretical prediction in case of pure elements (x = 0 or x = 1) are in good agreement with the available experimental data. For the Au–V system, the equilibrium Wigner–Seitz radius increase as x increases, while for the Au–Nb system, the equilibrium Wigner–Seitz radius is almost constant. The bulk modulus B and C₄₄ for both alloys exhibit nearly parabolic trend. On the other hand, the tetragonal shear elastic constant C′ decreases as x increases and correlates reasonably well with the structural energy difference between fcc and bcc structures. Our results offer a consistent starting point for further theoretical and experimental studies of the elastic and micromechanical properties of Au–V and Au–Nb systems.