Stereospecific Polymerization and Chiral Crystallization

Configurationally and conformationally specific polymerization processes which lead to helical macromolecules can be successfully carried out when monomer structure, polymerization mechanism, and spatial restrictions for monomer addition are all carefully considered. Under certain conditions, optically active polymers having a single helical screw sense can be prepared. Surprisingly, the chiral crystallization of certain inorganic salts has much in common with stereospecific polymerization mentioned above. Achiral sodium chlorate and sodium bromate can crystallize spontaneously from aqueous solutions to give a mixture of pure levorotatory and pure dextrorotatory isotropic crystals. The crystallization of these salts can also be nucleated with traces of levo- or dextro- rotatory crystals to furnish new crystals with a high degree of chiroptical purity. Our varied efforts within the confines of these two related fields are summarized.     

Dependence of the conformation of nascent poly(oxymethylene) on the conditions of cationic polymerization of trioxane in solution

The conformational structure of nascent poly(oxymethylene) (POM) obtained by cationic polymerization of trioxane in nitrobenzene was investigated by i.r. spectroscopy. It was found that the conformational order of this POM depends considerably on the conditions of preparation. Under conditions of simultaneous polymerization and crystallization, “A” polymer, with long sequences of monomer units in regular G conformation, is obtained. Under conditions of successive polymerization and crystallization, the formation of conformational defects in the helical POM chains is favoured. Then, depending on the supersaturation, we obtained either (a) POM of “B” form with short sequences of monomer units in G conformation, or (b) POM of a mixed type, the i.r. spectrum being describable as a superposition of “A” and “B” spectra. The results indicate that, at comparatively high catalyst concentration, the thermodynamical approach for regulation of supermolecular structure of polymers can be applied successfully for regulation of the conformational order of nascent POM also. At lower concentration of active centres in the polymerizing system, kinetic factors affect considerably the conformational structure of nascent POM.     

Lewis acidic organoboron polymers

We have developed a highly efficient new method for the introduction of Lewis acidic boron centers into the side chains of organic polymers. Our methodology involves three steps: (i) the controlled polymerization of a functional monomer, (ii) the exchange of the functional group for Lewis acidic boron centers, and (iii) the fine-tuning of the Lewis acidity of the individual centers through substituent exchange reactions with nucleophiles. This approach gives access to a family of new well-defined organoboron polymers including moderately Lewis acidic poly(arylboronates) and the first examples of highly Lewis acidic fluorinated triarylborane polymers.     

Viscoelasticity and primitive path analysis of entangled polymer liquids: from F-actin to polyethylene

We combine computer simulations and scaling arguments to develop a unified view of polymer entanglement based on the primitive path analysis of the microscopic topological state. Our results agree with experimentally measured plateau moduli for three different polymer classes over a wide range of reduced polymer densities: (i) semidilute theta solutions of synthetic polymers, (ii) the corresponding dense melts above the glass transition or crystallization temperature, and (iii) solutions of semiflexible (bio)polymers such as F-actin or suspensions of rodlike viruses. Together, these systems cover the entire range from loosely to tightly entangled polymers. In particular, we argue that the primitive path analysis renormalizes a loosely to a tightly entangled system and provide a new explanation of the successful Lin-Noolandi packing conjecture for polymer melts.     

Kinetics of free radical polymerization—XXXI. Solvent effect on the polymerization rate of ethyl acrylate

The free radical polymerization of ethyl acrylate was investigated in benzene and dimethyl formamide solutions at 50°. The effects of initiator and monomer concentration were studied over a wide range. The overall rate of polymerization was proportional to (initiator concentration)^{$\text{1}\text{2}$} but not to the concentration of the monomer. We attempted to interpret this solvent effect on the basis of (i) the diffusion theory, (ii) the theory of charge transfer complexes and (iii) the theory of hot radicals. Our experimental results could only be explained quantitatively in terms of hot radicals.     

Characterization of hydrophilic networks synthesized by group transfer polymerization

Group transfer polymerization was used to synthesize several series of hydrophilic random and model networks. Cationic random networks were prepared both in bulk and in tetrahydrofuran (THF) using a monofunctional initiator and simultaneous polymerization of monomer and branch units, while a bifanctional initiator was employed in THF for the synthesis of model networks comprising basic or acidic chains. Upon polymerization of the monomer, the latter initiator gives linear polymer chains with two “living” ends, which are subsequently interconnected to a polymer network by the addition of a branch unit. Homopolymer network star polymers were also synthesized in THF by a one‐pot procedure. The synthesis involved the use of a monofunctional initiator and the four‐step addition of the following reagents: (i) monomer, to give linear homopolymers; (ii) branch unit, to form “arm‐first” star polymers; (iii) monomer, to form secondary arms and give “in‐out” star polymers; and, finally (iv) branch unit again, to interconnect the “in‐out” stars to networks. Different networks were prepared for which the degree of polymerization (DP) of the linear chains between junction points was varied systematically. For all networks synthesized, the linear segments, the “arm‐first” and the “in‐out” stars were characterized in terms of their molecular weight (MW) and molecular weight distribution (MWD) using gel permeation chromatography (GPC). The degrees of swelling of both the random and model networks in water were measured and the effects of DP, pH, and monomer type were investigated.     

Stereospecific polymerization and chiral initiation,chiral crystallization and chiral nucleation

Helical macromolecules which are configurationally and conformationally specific can now be synthesized. Monomer structures must be selected that demand spacial restriction for monomer addition. High specificity of monomer addition during polymerization has parallels in crystallization of some inorganic salts from aqueous solution. Initiation of highly specific polymerizations with chiral initiators give helical polymers with substantial one-handedness. Nucleation of certain inorganic salts with chiral nucleating agents, the enantiomers of the salts produce enantiomerically pure chiral salts.     

Stereocontrol of diene polymers by topochemical polymerization of substituted benzyl muconates and their crystallization properties

We report the stereocontrol of diene polymers by the topochemical polymerization of alkoxy-substituted benzyl muconates in the solid state. A monomer stacking structure is controlled by the weak intermolecular interactions in the monomer crystals, depending on the structure and position of the alkoxy-substituent. The translational and alternating types of molecular stacking structures in a column provide diisotactic and disyndiotactic polymers, respectively, by the solid-state polymerization under UV and γ-ray irradiation. On the other hand, the meso and racemo structures of the resulting polymers are determined by the molecular symmetry of the used muconate monomers. The various substituted benzyl ester polymers are transformed into the same ethyl ester polymers with the four types of tacticities. The structure and crystallization behavior of the substituted benzyl ester polymers as well as the ethyl ester polymers have been revealed in detail. We clarify the effects of the tacticity on the crystallization property of the stereoregular polymuconates. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4952–4965, 2006     

Small molecule self‐assembly in polymer matrices

Using small molecules in polymer matrices is common in applications such as (i) plasticizing polymers to modify the glass transition and mechanical properties and (ii) dispersion of photoactive or electroactive small molecules in polymer matrices in organic‐electronic devices Aggregation of these small molecules and phase separation leading to crystallization often cannot be morphologically controlled. If these are designed with self‐assembling codes such as hydrogen bonding or aromatic interactions, their phase separation behavior would be distinctly different. This review summarizes the studies on morphologies in such situations, such as (i) sub‐surface assembly in polymer matrices, (ii) controlled polymerization‐induced phase separation to create polymer blends, (iii) using the polymer to direct the assembly of small molecules in liquid crystalline devices, (iv) functionalizing a polymer with self‐assembling small molecules to cause organo‐gelation which the polymer itself would not by itself, and (v) using such systems as templates to create porous polymer structures. Organic–inorganic hybrids using polymers as templates for nanostructures and imprinted porous membranes is an emerging area. Since self‐assembly is one of the dominating area of research with respect to both small molecules, polymers as well as the combination of the two, this review summarizes the studies on the aforementioned topics. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 451–478     

Extended-chain crystals. I. General crystallization conditions and review of pressure crystallization of polyethylene

This is the first paper of a series of reports concerning extended-chain crystals of flexible, linear high polymers. The general conditions for crystal growth are discussed. Polymer crystallization is described as a two-step process: nucleation of each crystallizing molecule to a folded-chain conformation, followed by an increase in fold length in a solid-state reorganization step. This reorganization step is enhanced in the case of polyethylene by crystallization at high temperature under elevated pressure. Mechanical deformation during crystallization is also able to produce extended-chain crystals. The most promising method, however, is crystallization during polymerization. Previous work on crystallization of polyethylene under elevated pressure is critically reviewed.     

Multi-step microfluidic polymerization reactions conducted in droplets: the internal trigger approach

We report the application of the "internal trigger" approach to multistep microfluidic polymerization reactions conducted in droplets, namely, polyaddition and polycondensation. We hypothesized and experimentally established that heat generated in an exothermic free radical polymerization of an acrylate monomer (Reaction 1) triggers the polycondensation of the urethane oligomer (Reaction 2). Completion of two microfluidic polymerization reactions led to the continuous synthesis of polymer particles with an interpenetrating polymer network (IPN) structure. Use of this microfluidic synthesis allowed us (i) to conduct efficient screening of the compositions of the monomer mixtures; (ii) to achieve control of the stoichiometric ratios of reactants in Reaction 2 by varying the flow rates of liquids; (iii) to reach control over the morphology of the resulting particles; and (iv) to produce polymer particles with a narrow size distribution and a predetermined size.     

Topochemical Polymerization of 1,3‐Diene Monomers and Features of Polymer Crystals as Organic Intercalation Materials

From the viewpoint of controlled polymer synthesis, topochemical polymerization based on crystal engineering is very useful for controlling not only the primary chain structures but also the higher‐order structures of the crystalline polymers. We found a new type of topochemical polymerization of muconic and sorbic acid derivatives to give stereoregular and high‐molecular weight polymers under photo‐, X‐ray, and γ‐ray irradiation of the monomer crystals. In this article, we describe detailed features and the mechanism of the topochemical polymerization of diethyl‐(Z,Z)‐muconate as well as of various alkylammonium derivatives of muconic and sorbic acids, which are 1,3‐diene mono‐ and dicarboxylic acid derivatives, to control the stereochemical structures of the polymers. The polymerization reactivity of these monomers in the crystalline state and the stereochemical structure of the polymers produced are discussed based on the concept of crystal engineering, which is a useful method to design and control the reactivity, structure, and properties of organic solids. The reactivity of the topochemical polymerization is determined by the monomer crystal structure, i.e. the monomer molecular arrangement in the crystals. Polymer crystals derived from topochemical polymerization have a high potential as new organic crystalline materials for various applications. Organic intercalation using the polymer crystals prepared from alkylammonium muconates and sorbates is also described.     

Enantiomer-selective Living Polymerization of <Emphasis Type="Italic">rac</Emphasis>-Phenyl Isocyanide Using Chiral Palladium Catalyst

We report the polymerization of phenyl isocyanides with the chiral palladium(II) initiating system. The resulting polymers with optically active properties were obtained by polymerization of the racemic isocyanide monomer (rac-1), and enantiomerically unbalanced polymerization of the monomer was found, providing substantial evidence for the enantiomer-selective polymerization of rac-1 mediated through chiral catalyst. A comparison between the enantiomerically pure monomers, 4-isocyanobenzoyl-L-alanine decyl ester (1s) and 4-isocyanobenzoyl-D-alanine decyl ester (1r), revealed a drastic discrepancy in the reactivity ratio of their homopolymerizations. It turned out that the monomer reactivity ratio of 1s was higher than that of 1r with chiral ligands. The results clearly demonstrated the inclination for incorporation of the 1s enantiomer during the polymerization process and thus resulted in the enantiomer-selective polymerization in this system. The effects of the catalyst chirality on the optically active properties of polymerization were investigated, and it was concluded that the formation of higher-ordered conformation with a handed helicity might be attributed to the chiral induction of chiral palladium(II) catalyst. Moreover, the polymers obtained through the enantiomer-selective polymerization of the enantiomerically pure monomer were with a significant improvement of the optical activity if the chirality of the monomer and the catalyst matched with each other.     

Polymer dynamics and topology: Extension of stars and dendrimers in external fields

We study the influence of topology on the extension of branched polymers subjected to external forces. Such forces can be applied mechanically (by micromanipulation techniques such as laser tweezers) or electrically (in the case of charged polymers). We focus on the unfold dynamics of star and dendrimer type structures. Some of the dynamical quantities of interest are: (i) the structural average of the mean monomer displacement, (ii) the elastic and the loss moduli and (iii) the mean displacement of a specified monomer. In a Gaussian‐type approach, (i) and (ii) depend only on the eigenvalues of the adjacency matrix whereas (iii) also requires the knowledge of the eigenvectors. Thus one can sometimes dispense with a full diagonalisation and use efficient recursion procedures. We highlight how the dynamic properties depend on topology: the number of branches and their length for stars and the number of generations for dendrimers. The intermediate time (crossover) behavior turns out to be most revealing of the underlying structure. We compare our results to those for fractal structures in external fields.     

Photoinitiating systems and their use in polymer synthesis

This paper on recent developments in the use of photoinitiating systems in polymer synthesis concentrates on: (i) the possiblity of controlled//living polymerization by photopolymerization, (ii) major photoinitiating systems for both cationic and radical polymerization and (iii) preparation of block copolymers and functional polymers by photoinduced processes. Much progress has been made in the past ten years in preparation of block copolymers by photoinduced reactions of either chromophoric groups incorporated into polymers or low‐molecular‐weight compounds with suitable functional groups present in polymer chains.     

Synthesis of polypeptide/inorganic hybrid block copolymers

Polypeptide/inorganic hybrid copolymers were obtained by a four-step synthetic approach combining (i) atom transfer polymerization of tert-butyl acrylate, (ii) chemical modification of the bromo end groups of ATRP-polymers into primary amino group using Gabriel reaction, (iii) ring opening polymerization of N_ε-trifluoroacetyl-l-lysine or γ-benzyl-l-glutamate N-carboxyanhydrides followed by (iv) the transamidification reaction using a large excess of (3-aminopropyl)trimethoxysilane to substitute the tert-butyl groups of the poly(tert-butyl acrylate) block. Products were characterized using ¹H NMR, FT-IR, DSC and MALDI-TOF MS. These techniques proved that polymerization of tert-butyl acrylate was controlled whatever the molecular weight targeted and that bromide was quantitatively converted to amino end group by a original method leading to the synthesis of copolymers in the presence of N-carboxyanhydrides as monomers. Amphiphilic polypeptide/inorganic hybrid copolymers were then achieved.     

SAXS study of core-shell colloids

Polymeric core-shell systems were produced by a two-stage emulsion polymerization technique under fixed conditions: i) monodisperse seed latex with a sufficiently high particle number; ii) starved monomer-II addition; iii) water-soluble initiator; iv) incompatibility of core and shell polymer. From electron micrographs, it is not possible to determine where the second polymer is located within these two-stage emulsion polymers. The internal structure of the particles can be detected by small-angle x-ray scattering. The results indicate that; i) the emulsion polymerization process takes place in a small surface layer region of the seed particles, and ii) a small interfacial layer exists between the core and shell polymer.Part 6 of Polymerizations in the Presence of Seeds     

Crystal-to-Crystal Synthesis of Helically Ordered Polymers of Trehalose by Topochemical Polymerization

The synthesis of crystalline helical polymers of trehalose via topochemical azide–alkyne cycloaddition (TAAC) of a trehalose-based monomer is presented. An unsymmetrical trehalose derivative having azide and alkyne crystallizes in two different forms having almost similar packing. Upon heating, both the crystals undergo TAAC reaction to form crystalline polymers. Powder X-ray diffraction (PXRD) studies revealed that the monomers in both the crystals polymerize in a crystal-to-crystal fashion; circular dichroism (CD) studies of the product crystals revealed that the formed polymer is helically ordered. This solvent-free, catalyst-free polymerization method that eliminates the tedious purification of the polymeric product exemplifies the advantage of topochemical polymerization reaction over traditional solution-phase polymerization.     

Polystyrene-coated micro-sized particles by "in situ" surface initiated polymerization in accord with Langmuir model adsorption

This study describes the mechanism of adsorption of polystyrene chains PS "in situ" growth from micro-sized commercial silicate particles, i.e. Feldspar. The main aim is to derive adsorption isotherms from thermal gravimetric analysis (TGA) and size exclusion chromatography (SEC) data obtained during the direct polymerization of PS initiated by a pre-adsorbed radical initiator onto the inorganic surface. The adsorption isotherm plot indicates that the PS adsorption is in accord with the Langmuir Model. The amount of PS monolayer coverage increases with polymerization time, and it is highly dependent on the monomer diffusion to the surface during the hybrid inorganic/organic synthesis. Such behavior depends on the concentration gradient between monomer concentration in solution and that adsorbed by polymerization onto the micro-sized particles surface of Feldspar.     

Photopolymerization of methyl methaerylate initiated by benzil in non-aqueous media

Summary Kinetics of polymerization of methyl methacrylate initiated by photolysis of benzil with 420 nm radiation, have been investigated at 35 °C. The rate of monomer disappearance has been followed gravimetrically and the chain-length of the polymer formed, measured by viscometry. The dependence of the rate of polymerization and quantum yield of monomer conversion on the concentrations of the monomer and the initiator, absorbed light-intensity etc. has been studied in detail. A kinetic scheme has been proposed in the light of experimental results, involving i) a primary photochemical act of excitation of the sensitizer producing free radicals by hydrogen abstraction, ii) initiation of polymerization by free radicals generated and iii) termination of the active chain by mutual combination involving either coupling or disproportionation.With 3 figures and 2 tables