Determination of bismuth(III) by direct potentiometry and potentiometric titration, with an electrode sensitive to Bi(3+)

A liquid-state ion-exchange electrode containing the chelate bismuth(III) complex with 5-mercapto-3-(naphthyl-2)-1,3,4-thiadiazole-2-thione in tetrachloroethane is applied to the determination of bismuth(III) by direct potentiometry and potentiometric titration. The influence of various interfering cations is discussed. In the presence of potassium cyanide as masking agent, Ni(II), Co(II), Cu(II), Ag(I) and Hg(II) do not interfere in the potentiometric EDTA titration. Satisfactory results have been obtained for the determination of bismuth(III) in Wood's metal and two pharmaceuticals.     

Improved potentiometric response of solid-contact lanthanum (III) selective electrode

For the first time, the analytical application of integrate ionophore-transducer material based on magnetic graphene hybrids and 2,2-dithiodipyridine (DTDP) in solid-contact lanthanum (III) selective electrode is reported. The attachment of Fe₃O₄ nanoparticles (NPs) to graphene oxide (GO) for magnetic graphene hybrid is achieved by covalent bonding, and the universal problem, Fe₃O₄ NPs may easily leach out from the graphene during application, is successfully solved by the method above. The proposed electrode exhibits an excellent near-Nernstian response to lanthanum (III) ranging from 1.0 × 10⁻⁹ to 1.0 × 10⁻³ M with a slope of 17.81 mV/dec. Moreover, the excellent performance on fairly good selectivity, wide applicable pH range (3.0^_8.0), fast response time (10 s) and long life time (2 months) reveal the superiority of the electrode. Most importantly, we have made a great improvement in the detection limit (2.75 × 10⁻¹⁰ M), which brings new dawn to the real-time detection of lanthanum (III) using ion selective electrode.     

Continuous-flow potentiometric determination of horseradish peroxidase with a fluoride-selective electrode

A continuous-flow system is reported for the determination of horseradish peroxidase (HRP) with a fluoride-selective electrode. Reaction conditions are optimized for the HRP-catalysed oxidation of p-fluoroaniline (0.104 M) with hydrogen peroxide (4.0 mM) as the oxidant in 0.16 M acetate buffer at pH 4.6. HRP is determined in the concentration range 0.016–0.12 U ml^?1 in the flow system at a sampling rate of 24 h^?1. Interfering effects caused by known HRP inhibitors, including metal ions, cyanide and sulphide, are reported for the range 1 μM–1 mM. Applications of the system for determination of the enzyme in turnip extract and milk are described.     

Kinetic potentiometric determination of citric acid with a perbromate-selective electrode

Citric acid is determined in the 96–960-μg range with relative errors of about 1% by means of its iron(II)-induced reaction with perbromate. Each analysis takes about 8 min. Tartaric and lactic acids interfere.     

New conventional coated-wire ion-selective electrodes for flow-injection potentiometric determination of chlordiazepoxide.

New chlordiazepoxide hydrochloride (Ch-Cl) ion-selective electrodes (conventional type) based on ion associates, chlordiazepoxidium-phosphomolybdate (I) and chlordiazepoxidium-phosphotungstate (II), were prepared. The electrodes exhibited mean slopes of calibration graphs of 59.4 mV and 60.8 mV per decade of (Ch-Cl) concentration at 25 degrees C for electrodes (I) and (II), respectively. Both electrodes could be used within the concentration range 3.16 x 10(-6)-1 x 10(-2) M (Ch-Cl) within the pH range 2.0-4.5. The standard electrode potentials were determined at different temperatures and used to calculate the isothermal coefficients of the electrodes, which were 0.00139 and 0.00093 V degrees C(-1) for electrodes (I) and (II), respectively. The electrodes showed a very good selectivity for Ch-Cl with respect to the number of inorganic cations, amino acids and sugars. The electrodes were applied to the potentiometric determination of the chlordiazepoxide ion and its pharmaceutical preparation under batch and flow injection conditions. Also, chlordiazepoxide was determined by conductimetric titrations. Graphite, copper and silver coated wires were prepared and characterized as sensors for the drug under investigation.     

Selective spectrophotometric determination of iron(III) with EDTA

A spectrophotometric determination of iron as its iron (III)-EDTA-H₂O₂-NH₃ complex is described; up to 10-fold amounts of metals that form EDTA complexes absorbing at the same wavelength do not interfere because hydrogen peroxide reacts with thciron(IIl)-EDTA complex but does not affect the EDTA complexes of coppcr(II), nickel(II), cobalt(ltl) and chromium(Ilt).     

Kinetic potentiometric determination of creatinine in urine with a picrate-ion-selective electrode

A new kinetic method for the potentiometric determination of creatinine in urine based on the creatinine-picrate reaction in alkaline medium (Jaffé reaction) is described. The reaction is monitored with a picrate-selective electrode, and the increase in electrode potential within a fixed period of time (90 sec) is measured and related directly to the creatinine concentration. Analytical recovery of creatinine added to urine was 86–101% (average, 95.5%). Comparison with a spectrophotometric method gave a correlation coefficient of 0.992 over a concentration range of 0.6–2.6 g/liter.     

Indirect potentiometric determination of sulphide with an iodide-selective electrode

Summary An indirect potentiometric method for the determination of sulphide is based on oxidation by an ethanolic solution of iodine and the measurement of the resulting iodide with an iodide-selective electrode. The limit of determination is 0.2g. If interferents are present the sulphide is separated by precipitation and then H₂S is evolved from it, absorbed and measured. The reproducibility is about 8% (relative).

---

Zusammenfassung Eine indirekte potentiometrische Methode zur Bestimmung von Sulfid beruht auf der Oxydation mit alkoholischer Jodlösung und Messung des Jodids mit einer jodid-selektiven Elektrode. Die untere Grenze der Bestimmung beträgt 0,2g. Bei Anwesenheit störender Substanzen wird das Sulfid gefällt, filtriert, daraus Schwefelwasserstoff freigesetzt und dieser absorbiert und gemessen. Die Reproduzierbarkeit beträgt etwa 8% relativ.

     

A novel tetrachlorothallate (III)-PVC membrane sensor for the potentiometric determination of thallium (III)

A novel tetrachlorothallate (III) (TCT)-selective membrane sensor consisting of tetrachlorothallate (III)-2,3,5-triphenyl-2-H-tetrazolium ion pair dispersed in a PVC matrix plasticized with dioctylphthalate is described. The electrode shows a stable, near-Nernstian response for 1×10⁻³-4×10⁻⁶ M thallium (III) at 25 °C with an anionic slope of 56.5±0.5 over the pH range 3-6. The lower detection limit and the response time are 2×10⁻⁶ M and 30-60 s, respectively. Selectivity coefficients for Tl(III) relative to a number of interfering substances were investigated. There is negligible interference from many cations and anions; however, iodide and bromide are significantly interfere. The determination of 0.5-200 μg ml⁻¹ of Tl(III) in aqueous solutions shows an average recovery of 99.0% and a mean relative standard deviation of 1.4% at 50.0 μg ml⁻¹. The direct determination of Tl(III) in spiked wastewater gave results that compare favorably with those obtained by the atomic absorption spectrometric method. The electrode was successfully applied for the determination of thallium in zinc concentrate. Also the tetrachlorothallate electrode has been utilized as an end point indicator electrode for the determination of thallium using potentiometric titration.     

Continuous-flow potentiometric determination of creatinine in urine with a picrate ion-selective electrode

A completely automated potentiometric method for the determination of creatinine in urine is described. Creatinine reacts with picrate in alkaline media (Jaffé reaction) in a flow system, and the decrease in picrate activity is continuously monitored with a picrateselective flow-through electrode. Creatinine in urine, in the range 0.5–3 g/liter, was determined in a sample volume of 0.15 ml, with a relative standard deviation of about 1%. Forty samples per hour can be analyzed without previous dilution or pretreatment. Recovery of creatinine added to urine samples ranged from 90 to 111% with an average of 96.7%. The method compares favorably with a photometric method. The proposed automated method is suitable for routine clinical measurements and screening tests.     

Flow-injection potentiometric determination of free cadmium ions with a cadmium ion-selective electrode

The determination of free cadmium ions with solid-state cadmium ion-selective electrode can be performed in non-flow measurements in non-buffered solutions in a wide concentration range down to pCd 10. In cadmium ion buffered solutions linear Nernstian response was obtained even down to pCd 12, which is lower, that expected based on calculation of cadmium solubility from the conditional solubility product. Interferences of trace amounts of Fe(III), Cu(II) and Pb(II) commonly present in natural waters in larger concentrations than Cd(II) can be eliminated by reduction with hydroxylamine, complexation with Neocuproine and ion-exchange on anion-exchange resin in sulphate form, respectively. The developed procedure might be suitable for the determination of activity of free cadmium ions in natural water. A preliminary study on this subject is demonstrated for river water sample using stopped-flow flow-injection system.     

Development of a flow manifold for Fe(III) ion determination with a fluoride ion-selective electrode

Continuous-flow (CF) and flow-injection (FI) analysis using the fluoride ion-selective electrode (FISE) as detector have been investigated. The measurements were performed in a home-made cell under appropriate flow conditions (2.86 or 3.45 ml min⁻¹, 0.2 ml samples, 10⁻⁶ M sodium fluoride). The calibration graph was obtained by plotting the signal height versus concentration of iron in the range of Fe(III) concentration from 10⁻⁵ to 10⁻¹ M in acetate buffer (pH 2.8 or 3.4). In all described procedures, the range of linear response extends to the Fe(III) concentration from 1×10⁻³ to 1×10⁻¹ M, with detection limit 9×10⁻⁵ M. The effect of double-line, two-line flow manifold and CF was investigated and discussed.     

Sequential potentiometric complexometric redox determination of iron(III) and cobalt(II) with application to alloys

A simple potentiometric method is presented for successive determination of iron(III) and cobalt(II) by complexometric titration of the iron(III) with EDTA at pH 2 and 40 degrees , followed by redox titration of the cobalt(II) complex with 1,10-phenanthroline or 2,2'-bipyridyl at pH 4-5 and 40 degrees , with gold(III). There is no interference in either determination from common metal ions other than copper(II), which severely affects the cobalt determination but can be removed by electrolysis. The method has been successfully applied to determination of iron and cobalt in Kovar and Alnico magnet alloys.     

Application of a coated-wire electrode to an acetylcholine sensor

An acetylcholine sensor was constructed with acetylcholinesterase which was immobilized on a hydrogen ion-selective coated-wire electrode and fundamental properties of this sensor were investigated. Acetylcholine could be determined in the range 0.1–10 rum with response times of 3–10 min. The effects of pH and concentration of buffer solution on the determination and fluctuations in the data obtained with this sensor were also investigated. Possibilities for the practical use of this acetylcholine micro-sensor are suggested.     

Selective potentiometric determination of nitrite ion using a novel (4-sulphophenylazo-)1-naphthylamine membrane sensor

A novel polymeric membrane sensor sensitive to (4-sulphophenylazo-)1-naphthylamine (SPAN) based on the use of tris(bathophenanthroline) Ni(II)–SPAN ion pair as an ion exchanger in plasticised PVC membrane is described. The sensor exhibits a linear calibration plot with near-Nernstian anionic slope of −55.0±0.3 mV log[SPAN]⁻¹ over the concentration range 10⁻⁶–10⁻² mol l⁻¹ at pH 7. The sensor shows working range over the pH 6–8, response time of 20 s for 10⁻⁵ mol l⁻¹ and operational lifetime of 8 weeks. The sensor is used for quantification of micro quantities of nitrite ion by a prior conversion into the more lipophilic SPAN ion, which is measured with adequate sensitivity, and high selectivity using SPAN sensor. Validation of the method according to the quality assurance standards shows good performance characteristics. The sensor is satisfactory utilised for potentiometric determination of nitrite ion in wastewater samples and meat products. The results are favourably compared with data obtained using the standard spectrophotometric procedure involving the same reaction.     

Coated-wire ion-selective electrode for the determination of gold(III)

A coated-wire gold(III)-selective electrode based on the 1,2,4,6-tetraphenyl-pyridinium tetrachloroaurate(III) ion-pair is described. The response is Nernstian in the gold concentration range 10^?2–3 × 10^?6 (slope 59.0 mV/pAu). Of the 22 ions tested, only the interference of thallium(III) is important. The electrode is applied to the determination of gold in an Ag-Pd-Au alloy with satisfactory results.