微波灰化-电感耦合等离子体发射光谱法测定婴幼儿乳粉中的钙和磷

采用微波灰化-电感耦合等离子体发射光谱法（ICP-OES）测定婴幼儿乳粉中钙、磷元素含量.采用微波灰化法对婴幼儿乳粉进行前处理,正交试验方法确定微波灰化最佳条件,灰化后产物用2 mL硝酸溶液(体积比为1∶1)溶解后,用ICP-OES对钙、磷元素进行含量检测.磷加标回收率为86%～104%,钙加标回收率为87%～96%.磷的相对标准偏差为2.5%～7.0%,钙的相对标准偏差为3.9%～10.0%,能够满足日常检测要求.采用微波灰化法对婴幼儿乳粉中钙、磷元素进行样品前处理,相比微波消解方法,具有用时短、用酸量少、消解效果好、不需要进行赶酸处理等优点.与干法灰化和湿法消解相比大大减少了样品处理时间.采用微波灰化与ICP-OES结合对婴幼儿乳粉中的重要指标元素进行检测,在婴幼儿乳粉质量控制中有很好的应用价值.     

微波消解试样-火焰原子吸收光谱法测定原油和渣油中铁、镍和铜

采用微波消解技术消解原油和渣油样品,研究了微波消解-火焰原子吸收光谱法测定原油和渣油中铁、镍和铜的方法。考察了最佳样品用量、酸用量、微波消解时间、消解压力、消解功率,确定了微波消解原油和渣油的最佳程序。此法样品损失少,酸用量少,降低了环境污染,所用时间缩短了3.5倍。测定结果与灰化法结果一致,铁、镍和铜的相对误差分别为1.6%,1.4%和1.6%。该方法简便、快速、准确,是一种绿色环保的分析方法。     

固体微波介质加热快速提取新鲜橘皮中挥发油组分

对传统微波加热模式进行了改进,以具有良好微波吸收性能的微波吸收固体介质取代传统溶剂和水,将其加入到新鲜样品的提取体系,达到快速升温的目的.将改进的微波辅助无溶剂法应用于提取新鲜植物样品中挥发油组分,并考察了3种微波吸收介质(羰基铁粉、石墨粉和活性炭粉)对提取结果的影响.结果证明:对于新鲜样品,除活性炭粉无法使用外,羰基铁粉和石墨粉均适用.在20 g微波吸收介质及85 W微波功率的加热作用下,仅需30 min即可将100 g样品中的挥发油提取完全.通过与传统微波辅助无溶剂法、微波辅助水蒸馏法和传统水蒸馏法比较,改进的微波辅助无溶剂法具有提取时间短(30 min)、耗电量小(0.43 kW · h/kg)等优点,且所得挥发油组分无明显差别.此外,还考察了烘干过程对橘皮挥发油组成的影响,发现橘皮挥发油的组成受烘干影响较大.     

电感耦合等离子体发射光谱法测定植物油中的磷

用电感耦合等离子体发射光谱法(ICP-AES)测定了植物油中的磷.采用多谱线拟合技术(MSF)校正了铜对P213.617 nm和P214.914 nm光谱干扰.比较了活性炭炭化灰化法和微波消解法两种样品前处理方法对分析结果的影响.结果表明这两种前处理方法所得结果都能与国标磷钼蓝分光光度法的分析结果吻合,其中活性炭炭化灰化法的方法检出限(0.053 mg/kg)较微波消解法的方法检出限(0.42 mg/kg)更低,所以对低含量的磷的检测结果其相对误差及精密度更好.该法应用于植物油中磷的测定.     

电感耦合等离子体原子发射光谱法测定载钯树脂中钯的前处理方法考察

采用电感耦合等离子体原子发射光谱法(ICP-AES)测定载钯树脂中的钯,对比了灰化法、硝酸-高氯酸法和微波消解法3种前处理方法,考察了称样量、消解加酸量、处理时间和灰化温度等对测定的影响,优化了最佳试验条件,讨论了共存离子的干扰.结果表明,钯质量浓度在0~50 mg/L范围内与强度线性关系良好,线性相关系数为0.999 5,灰化法、硝酸-高氯酸法和微波消解法3种方法的检出限分别为0.002 8、0.005 4、0.002 3 mg/L,相对标准偏差(n=11)分别0.69%、0.63%、0.42%,加标回收率分别为98%~100%、98%~101%、100%~104%.采用3种方法对实际样品进行测定,发现微波消解法处理时间最短,样品处理最完全,检测值最平行.用试验方法与原子吸收光谱法测定同一个载钯树脂,两者测定结果基本相符.     

超级微波消解－石墨炉原子吸收光谱法测定香菇中的镉

为建立一种快速批量检测香菇中镉的方法,建立了超级微波消解－石墨炉原子吸收光谱法测定香菇中镉含量的方法。分别采用湿法消解、普通微波消解和超级微波、传统微波和湿法消解技术前处理香菇标准物质样品,对比消解效果,优化超级微波消解技术的酸体系和消解最终温度。;采用石墨炉原子吸收光谱仪法测定,优化基体改进剂、灰化温度等工作参数,确定仪器最佳检测条件,验证分析方法的准确性和稳定性。结果表明,超级微波消解优于湿法消解和传统微波消解技术,准确性和重复性最佳,大幅减少用酸量的同时更加安全、高效,避免样品污染。在最优分析方法条件下,镉在0~4.0 μg/L范围内所得回归方程线性关系良好,相关系数(R)为0.9994,方法检出限为0.001 mg/kg,精密度RSD为1.4%~2.5%。超级微波消解－石墨炉原子吸收光谱法检测的探索与应用超级微波消解优于湿法消解和传统微波消解技术,大幅减少用酸量的同时更加安全、高效,避免样品污染,为农产品镉含量批量检测提供可靠的方法支撑。     

微波消解电感耦合等离子体发射光谱法测定塑料中铅和镉

采用微波消解技术溶样，ICP-AES法测定了塑料中的铅和镉。通过对消解试剂和微波温度程序的研究，建立了塑料样品的微波消解方法。该方法与传统马弗炉高温灰化消解方法比较，具有准确、简便、快速、省试剂、污染少、消解完全等优点。方法回收率为93％～106％，相对标准偏差(n=7)均小于2％。实际样品对比分析结果表明，方法具有良好的准确度，适于多种塑料材料中铅和镉的快速分析。     

微波吸收介质管-微波辅助提取水果中的有机磷农药

使用自行设计的微波吸收介质管辅助加热样品, 建立了一种新的微波加速提取法, 并以正己烷为提取溶剂, 利用改装的便携式微波提取仪提取了水果中的4种有机磷农药. 将微波介质密封于玻璃管内制成微波介质管, 使微波介质可重复使用, 同时加快了提取速度. 提取产物无需纯化, 可直接用于气相色谱-质谱联用(GC-MS)分析. 自行设计改装的交直流两用便携式微波提取仪可用于野外现场的快速样品前处理. 以水果样品为例, 对提取溶剂的种类、 料液比、 提取温度及提取时间等条件进行了优化, 结果表明该方法简便、 快速且高效. 4种有机磷农药的回收率为79.4% ~107.6%, RSD<12.20%, 检出限为0.15 ~0.42 μg/kg.     

中草药样品不同预处理方法对微量元素测定结果的影响

探讨了采用不同的预处理方法对中草药中微量元素含量测定结果的影响。结果表明，湿式消化法优于干式灰化法，所测中草药中锌、铜、锰、铁、铅和镉的数值较高，这可能与湿式消化法处理样品时，元素被挥发、损耗和吸附较少有关。     

非完全消化悬浮液进样火焰原子光谱法测定木耳中钾铜锌

将非完全消化法与悬浮液进样技术相结合处理木耳样品 ,即在加热下用浓硝酸消解样品 ,使绝大部分样品组分进入溶液 ,再加入乳化剂OP溶液及琼脂溶液将极小部分的不溶物悬浮成悬浮液 ,用吸收法测定铜、锌 ,以发射法测定钾。建立了测定木耳中钾、铜和锌的快速火焰原子光谱法。工作曲线法的测定结果与灰化法一致 ,相对误差小于± 2 .6% ,t检验表明此法与灰化法之间无显著性差异。方法简便、快速、准确     

Edible oil bleaching with a bentonite activated by micro wave irradiation

A clay impregnated with an ammonium chloride solution was activated in a micro-wave oven. Optimal conditions of activation were determined by bleaching tests of a degummed and neutralized crude edible oil. Optimum values (concentration of NH₄Cl solution: 3M, heating time: 15 minutes) led to a material as effective as a commercial virgin bleaching earth in the treatment of an edible oil. The percent bleaching values calculated at 410 nm and 465 nm are 86% and 92%, respectively, for an oil processed by the micro-wave activated clay, against 77% and 93% for the same crude oil processed by a commercial virgin bleaching earth.     

微波消解技术在农业样品分析中的应用

利用光纤压力自控密闭微波消解系统对土壤和植株样品中重金属元素测定的影响进行了研究，确立了样品消解试剂、微波消解每件及样品预处理方法。结果表明，该方法与常压湿法消解相比，具有样品消解时间短、消解试剂用量少、样品污染小等特点，是准确可靠的土壤及植株样品中重金属元素检测样品消解处理方法。     

Microwave-assisted Sinthesis of Thymyl Ethers and Esters in Aqueous Medium

Various thymyl ethers and esters have been synthesized by reactions of thymol with alkyl halides and acid chlorides, respectively, in aqueous medium under environmentally benign conditions using micro-wave irradiation. The products are important as potent pest managing agents.     

Application of 1H NMR in the flow surveillance of oil wells

Test‐separator units, as traditional methods of well surveillance, mainly suffer from their inherent constraints including the expensive instrumental, mechanical, electrical, piping and safety devices along with technical and protective inspections, repair and operation services, facilities and infrastructures. Other problems are time and cost consuming, uncertainty of well isolation in test separator and need to close the co‐line wells, which are diminished using multivariate thermal well testing. A novel approach was proposed and tested to classify the oil samples taken from individual wells by source and type. The novelties of this work were the use of the applied aspects of ¹H NMR spectroscopy in petroleum upstream engineering, the replacement of traditional test methods, the improvement of the confidence of tests and the recognition of multisource streams. The weighed sum method was used to correlate the spectra information, taken from the samples of Iranian offshore oil wells. The experimental results and the field data revealed that the present approach was appropriate for precocious, quick and reliable surveillance of individual oil wells located in an oil field. The model was supported by field experiments and has predicted the accurate productivity of oil wells with respect to the current expensive techniques since 2010. Copyright © 2012 John Wiley & Sons, Ltd.     

原油及重油的快速分析技术进展

近年来,随着我国原油加工量的不断增加,加工难度的不断增大,原油快速评价问题日益受到重视.原油评价是指在全面分析原油的物理及化学性质的基础上,对原油的可加工性能及加工过程中可能出现的问题进行综合分析的过程.目前飞速发展的计算机技术及仪器分析技术,为原油快评技术奠定了良好的基础.该文以不同分析方法进行分类,介绍了近红外光谱(NIR)、中红外光谱(IR)、核磁共振波谱(NMR)及其他分析方法在原油和重油快速分析领域的技术进展.     

Thermal characterisation of Australian oil shales

There has been a significant research effort on the development of an oil industry based on Australian oil shales. However, to date the research has been based mainly on the processing aspects of oil shale. The thermal analyses of oil shales, while having been the subject of many studies, have been limited to some extent by instrumentation and analytical techniques. This paper reports on thermal analysis studies utilising traditional thermogravimetry/differential thermal analysis (TG/DTA) and differential scanning calorimetry (DSC). The application of modern thermal analysis techniques such as high resolution TG (HRTG) and modulated differential scanning calorimetry (MDSC) is also examined and compared to the traditional methods.     

石墨炉原子吸收法测定鱼中的铅

用硝酸和双氧水对鱼肉样品进行微波消解,然后用石墨炉原子吸收分光光度法测定鱼肉样品中铅的含量,测定结果的相对标准偏差为0．023％～0.137％（n=6）,加标回收率为83％～105％。     

C60笼内内陷粒子的运动

研究C60笼内内陷粒子的量力力学运动, 导出运动能量与波函数, 以内陷CO分子为例做了计算, 解释了分子对微波的吸收现象。     

Application of data mining methods for classification and prediction of olive oil blends with other vegetable oils

The aim of this article is to study tree-based ensemble methods, new emerging modelling techniques, for authentication of samples of olive oil blends to check their suitability for classifying the samples according to the type of oil used for the blend as well as for predicting the amount of olive oil in the blend. The performance of these methods has been investigated in chromatographic fingerprint data of olive oil blends with other vegetable oils without needing either to identify or to quantify the chromatographic peaks. Different data mining methods—classification and regression trees, random forest and M5 rules—were tested for classification and prediction. In addition, these classification and regression tree approaches were also used for feature selection prior to modelling in order to reduce the number of attributes in the chromatogram. The good outcomes have shown that these methods allow one to obtain interpretable models with much more information than the traditional chemometric methods and provide valuable information for detecting which vegetable oil is mixed with olive oil and the percentage of oil used, with a single chromatogram.

Analysis of enhanced oil recovery formulations

Summary Methods for the determination of low levels of surfactants in produced oil field brines have been developed. Alkylbenzene sulfonates (ABS) and alkylether sulfates can be quantified at very low levels by high-performance liquid chromatography (HPLC) and mobile-phase ion chromatography (MPIC), respectively. These methods proved to be rapid, selective, and gave results in excellent agreement with traditional low-phase titration techniques. Although this paper records the use of these methods for analysis of oil field produced fluids, they should be easily adaptable to other situations wherein the analysis of these two classes of surfactants is required.