Fluoroethylene carbonate as an important component in organic carbonate electrolyte solutions for lithium sulfur batteries

The benefits of fluoroethylene carbonate (FEC)-based electrolyte solution (1 M LiPF₆ in FEC/dimethyl carbonate (DMC)) over ethylene carbonate (EC)-based electrolyte solution (1 M LiPF₆ in EC/DMC) for the cycling of sulfur/carbon (S/C) composite cathodes were demonstrated for S/C composites prepared with two drastically different types of carbon hosts, micrometer-sized activated carbon powder (AC1) and carbonized polyacrylonitrile (PAN) cloth. The formation of solid electrolyte interphase (SEI) on the surface of the cycled S/C electrodes was demonstrated using scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS).     

Enhanced electrochemical performance of LiFePO4 cathode with the addition of fluoroethylene carbonate in electrolyte

The effect of the fluoroethylene carbonate (FEC) addition in electrolyte on LiFePO₄ cathode performance was investigated in low-temperature electrolyte LiPF₆/EC/PC/EMC (0.14/0.18/0.68). Cyclic voltammetry, electrochemical impedance spectroscopy, and charge/discharge tests were conducted in this work. In the presence of FEC, the polarization of LiFePO₄ electrode decreased both at room and low temperatures. Meanwhile, the exchange current density increased. The rate capability of LiFePO₄ electrode was greatly enhanced as well. The morphology of the solid electrolyte interphase (SEI) on LiFePO₄ surface was modified with the addition of FEC as confirmed by scanning electron microscopy measurement. A compact film with small impedance was formed on LiFePO₄ surface compared to the case of FEC-free. The compositions of the film were analyzed by X-ray photoelectron spectroscopic measurement. The contents of Li _x PO _y F _z , LiF, and the carbonate species generated from solvents decomposition were reduced. The modified SEI promoted the migration of lithium ion through the electrode/electrolyte interphase and enhanced the electrochemical performance of the cathode.     

Vibrational Spectra and Ion-Pair Properties of Lithium Hexafluorophosphate in Ethylene Carbonate Based Mixed-Solvent Systems for Lithium Batteries

The vibrational spectra of LiPF₆ 1M solutions formed in aprotic mixed solventsobtained by mixing ethylene carbonate with dimethyl carbonate and diethylcarbonate are discussed. The Raman and infrared spectra of lithium hexafluorophosphate(LiPF₆) and the quantum chemical computations of the vibrationalwavenumbers and intensities are reported. Due to the nature of the solutions,attenuated total internal reflectance spectroscopy was used to obtain the infraredspectra. The infrared active vibrational fundamentals of PF₆ ^– provided evidencefor the anion—solvent interaction as well as ion-pair formation. Similarly, theinfrared active modes of the solvent showed significant changes due to thecation—solvent interaction. The computations of the most energetically favorablegeometry in the formation of the Li⁺ PF₆ ion pair are also presented. Conductivitymeasurements carried out for the 1M solutions scanning a wide temperatureinterval (–30 to + 60 °C) confirm the viability of these electrolytes forpractical applications.     

Polysiloxane-based Electrolytes: Influence of Salt Type and Polymer Chain Length on the Physical and Electrochemical Properties

An oligo/poly(methyl(2-(tris(2-H methoxyethoxy)silyl)ethyl)siloxane)), 390EO, and 2550EO, were synthesized. Dilute electrolyte solutions of 390EO and 2550EO were prepared using LiTFSI, LiFSI, and LiPF₆. The influence of the length of the siloxane polymer chain, salt type, and Si-tripodand centers at the side chain on ionic conductivity, t_Li⁺, and physical properties were examined. Both electrolyte systems showed high values of t_Li⁺ (0.35 for 2550EO/LiTFSI and 0.64 for 390EO/LiTFSI). Alternatively 390EO/LiPF₆ and 2550EO/LiPF₆ displayed high t_Li⁺ values of 0.61 and 0.44, respectively, while 390EO/LiFSI displayed the smallest t_Li+ (0.25). To clarify the role played by the Li⁺ environment in Li⁺ transport, the solvation states of electrolytes were examined. It was observed that anion solvation can be achieved using siloxane-based solvent in all systems. Walden plot analysis demonstrates that ionic diffusion was not controlled by either macroviscosity/microviscosity in the siloxane-based polymer electrolytes. Ions instead move along a relatively smooth ion-pathway without complete full segmental reorientation in 2550EO as a result of decoupling and high ion solvation behavior. Conversely, in 390EO, ions might move to available sites by a jumping after decoupling with low ion solvation behavior. Consequently, a high t _Li⁺ was achieved, and the oxidative stability of the salt was ensured.     

Novel Plasticized Electrolytes Based on Oligourethane Methacrylate and Polypropylene Glycol Monomethacrylate

Novel polymer gel electrolytes (PGE) based on a composition of oligourethane methacrylate, polypropylene glycol monomethacrylate, and 1 M solutions of LiClO₄ or in LiBF₄-butyrolactone or LiPF₆ in ethylene carbonate/dimethyl carbonate (1 : 1 by volume) are synthesized and studied. The electrolyte films are solidified from liquid PGE solutions by irradiating the latter with UV light. Impedance spectroscopy shows PGE to have conductivity of about 3.0 × 10^–3 S cm^–1 at room temperature. To enhance mechanical strength of PGE, the electrolyte solutions are applied onto a fiber polypropylene separator and then photosolidified. The temperature dependences of the bulk conductivity and the charge transfer resistance through the Li/PGE interface are studied. The best PGE is that based on a 1 M LiClO₄ solution in -butyrolactone containing 20 wt % of the polymer composite.     

Clarification of Decomposition Pathways in a State‐of‐the‐Art Lithium Ion Battery Electrolyte through 13C‐Labeling of Electrolyte Components

The decomposition of state‐of‐the‐art lithium ion battery (LIB) electrolytes leads to a highly complex mixture during battery cell operation. Furthermore, thermal strain by e.g., fast charging can initiate the degradation and generate various compounds. The correlation of electrolyte decomposition products and LIB performance fading over life‐time is mainly unknown. The thermal and electrochemical degradation in electrolytes comprising 1 m LiPF₆ dissolved in ¹³C₃‐labeled ethylene carbonate (EC) and unlabeled diethyl carbonate is investigated and the corresponding reaction pathways are postulated. Furthermore, a fragmentation mechanism assumption for oligomeric compounds is depicted. Soluble decomposition products classes are examined and evaluated with liquid chromatography‐high resolution mass spectrometry. This study proposes a formation scheme for oligo phosphates as well as contradictory findings regarding phosphate‐carbonates, disproving monoglycolate methyl/ethyl carbonate as the central reactive species.     

Synthesis and electrochemical properties of activated carbons and Li4Ti5O12 as electrode materials for supercapacitors

New activated nanoporous carbons, produced by carbonization of mixtures of coal tar pitch and furfural with subsequent steam activation, as well as electrochemically active oxide Li₄Ti₅O₁₂, prepared by thermal co-decomposition of oxalates, were tested and characterized as electrode materials for electrochemical supercapacitors. The phase composition, microstructure, surface morphology and porous structure of the materials were studied. Pure carbon electrodes as well as composite electrodes based on these materials obtained were fabricated. Two types of supercapacitor (SC) cells were assembled and subjected to charge–discharge cycling study at different current rates: (1) symmetric sandwich-type SC cells with identical activated carbon electrodes and different organic electrolytes, and (2) asymmetric hybrid SC cell composed by activated graphitized carbon as a negative electrode and activated carbon–Li₄Ti₅O₁₂ oxide composite as a positive electrode, and an organic electrolyte (LiPF₆–dimethyl carbonate/ethylene carbonate (DMC/EC). Four types of carbons with different specific surface area (1,000–1,600 m² g^?1) and texture parameters, as well as three types of organic electrolytes: Et₄NBF₄–propylene carbonate (PC), LiBF₄–PC and LiPF₆–DMC/EC in the symmetric SC cell, were tested and compared with each other. Capacitance value up to 70 F g^?1 for the symmetric SC, depending on the electrolyte microstructure and conductivity of the carbon material used, and capacitance of about 150 F g^?1 for the asymmetric SC cell, with good cycleability for both supercapacitor systems, were obtained.     

Reaction Mechanisms of the Degradation of Fluoroethylene Carbonate,an Additive of Lithium-Ion Batteries,Unraveled by Radiation Chemistry

Numerous additives are used in the electrolytes of lithium-ion batteries, especially for the formation of an efficient solid electrolyte interphase at the surface of the electrodes. Understanding the degradation processes of these compounds is thus important; they can be seen through radiolysis. In the case of fluoroethylene carbonate (FEC), picosecond pulse radiolysis experiments evidenced the formation of FEC^.−. This radical is stabilized in neat FEC, whereas the ring opens to form more stable radical anions when FEC is a solute in other solvents, as confirmed by quantum chemistry calculations. In neat FEC, pre-solvated electrons primarily undergo attachment rather than solvation. On long timescales, the gases produced (H₂, CO, and CO₂) were quantified. A reaction scheme for both the oxidizing and reducing pathways at stake in irradiated FEC is proposed. This work shows that the nature of the primary species formed in FEC depends on the amount of FEC in the solution.     

Electrolyte and interphase engineering through solvation structure regulation for stable lithium metal batteries

Lithium metal batteries (LMBs) are considered to be one of the most promising high-energy-density battery systems. However, their practical application in carbonate electrolytes is hampered by lithium dendrite growth, resulting in short cycle life. Herein, an electrolyte regulation strategy is developed to improve the cyclability of LMBs in carbonate electrolytes by introducing LiNO₃ using trimethyl phosphate with a slightly higher donor number compared to NO₃⁻ as a solubilizer. This not only allows the formaion of Li⁺-coordinated NO₃⁻ but also achieves the regulation of electrolyte solvation structures, leading to the formation of robust and ion-conductive solid-electrolyte interphase films with inorganic-rich inner and organic-rich outer layers on the Li metal anodes. As a result, high Coulombic efficiency of 99.1% and stable plating/stripping cycling of Li metal anode in Li||Cu cells were realized. Furthermore, excellent performance was also demonstrated in Li||LiNi_0.83Co_0.11Mn_0.06O₂ (NCM83) full cells and Cu||NCM83 anode-free cells using high mass-loading cathodes. This work provides a simple interphase engineering strategy through regulating the electrolyte solvation structures for high-energy-density LMBs.     

Effect of sulfolane on the morphology and chemical composition of the solid electrolyte interphase layer in lithium bis(oxalato)borate‐based electrolyte

To discuss the source of sulfolane (SL) in decreasing the interface resistance of Li/mesophase carbon microbeads cell with lithium bis(oxalate)borate (LiBOB)‐based electrolyte, the morphology and the composition of the solid electrolyte interphase (SEI) layer on the surface of carbonaceous anode material have been investigated. Compared with the cell with 0.7 mol l^?1 LiBOB‐ethylene carbonate/ethyl methyl carbonate (EMC) (1 : 1, v/v) electrolyte, the cell with 0.7 mol l^?1 LiBOB‐SL/EMC (1 : 1, v/v) electrolyte shows better film‐forming characteristics in SEM (SEI) spectra. According to the results obtained from Fourier transform infrared spectroscopy, XPS, and density functional theory calculations, SL is reduced to Li₂SO₃ and LiO₂S(CH₂)₈SO₂Li through electrochemical processes, which happens prior to the reduction of either ethylene carbonate or EMC. It is believed that the root of impedance reduction benefits from the rich existence of sulfurous compounds in SEI layer, which are better conductors of Li⁺ ions than analogical carbonates. Copyright © 2013 John Wiley & Sons, Ltd.     

The underlying mechanism for reduction stability of organic electrolytes in lithium secondary batteries

Many organic solvents have very desirable solution properties, such as wide temperature range, high solubility of Li salts and nonflammability, and should be able but fail in reality to serve as electrolyte solvents for Li-ion or -metal batteries due to their reduction instability. The origin of this interfacial instability remains unsolved and disputed so far. Here, we reveal for the first time the origin of the reduction stability of organic carbonate electrolytes by combining ab initio molecular dynamics (AIMD) simulations, density functional theory (DFT) calculations and electrochemical stability experiments. It is found that with the increase of the molar ratio (MR) of salt to solvent, the anion progressively enters into the solvation shell of Li⁺ to form an anion-induced ion–solvent-coordinated (AI-ISC) structure, leading to a “V-shaped” change of the LUMO energy level of coordinated solvent molecules, whose interfacial stability first decreases and then increases with the increased MRs of salt to solvent. This mechanism perfectly explains the long-standing puzzle about the interfacial compatibility of organic electrolytes with Li or similar low potential anodes and provides a basic understanding and new insights into the rational design of the advanced electrolytes for next generation lithium secondary batteries.

By theoretical and experimental evidence, the underlying mechanism for the enhanced reduction stability of the HMRE is revealed, suggesting that the interfacial stability of the electrolyte can be adjusted through the modulation of the anion-induced ISC structure.

The state-of-the-art electrolytes in Li-ion batteries (LIBs) are mostly based on 1.0 mol L⁻¹ LiPF₆/ethylene carbonate (EC)-based carbonate due to the surface passivation of the graphite anode by forming a stable solid electrolyte interphase (SEI). However, these electrolytes cannot operate well for new electrode materials and battery systems that are expected to have higher voltage, better safety and wider temperature range than current commercial LIBs.^1–3 For example, EC-based carbonate electrolytes are easily oxidized on a high voltage cathode at or above 4.3 V, resulting in depletion of electrolytes, gas evolution and low coulombic efficiency, which reduce the cycle life and create safety hazards for LIBs.⁴ These problems of the conventional electrolyte significantly hinder the development of new generation lithium batteries and limit these batteries for high voltage and/or high capacity applications and operation in a wide temperature range.To overcome these problems, great efforts have been devoted in recent years to the development of new electrolytes, such as solid state electrolytes,⁵ ionic liquids,^6–8 highly-concentrated electrolytes (HCEs),⁹ electrolyte stabilizing additive,^10–13 and so on. Among them, the HCEs or high-molar-ratio electrolytes (HMREs) of salt to solvent have received particular attention, owing to their unusual electrochemical stability, nonflammability, and good compatibility with a wide range of anode and cathode materials.^14–17 These desirable properties are apparently attributed to the solution structure of HCEs, where there exist almost no free solvent molecules, and the parasitic side reactions of solvents are thereby greatly reduced. Due to the lack of solvent molecules in HCEs, anions have to enter into the solvation shell of Li⁺, in order to meet the Li⁺ coordination number of 4–6, to form an ion–solvent-coordinated (ISC) structure.¹⁸ Several studies have shown that the unique ISC structure of HCEs leads to the shift of the lowest unoccupied molecular orbital (LUMO) from solvent to salt, which makes anions preferentially reduced or decomposed to produce a robust anion-derived SEI.^14,19 In recent years, the anion-derived SEI structure has been regarded as the “holy grail” of electrolyte chemistry for understanding the interfacial stability and compatibility of HCEs. However, recent studies have showed that some HCEs containing non-film-forming salts and solvents can still achieve excellent reversible Li⁺ insertion reactions.²⁰ Therefore, an intrinsic origin for the interfacial stability of HCEs still remains unrevealed. In our previous studies on HCEs or HMREs, their interfacial stability was found to depend predominately on the molar ratio (MR) of salt to solvent rather than the molar concentration.^2,21,22 Thus, the HMREs instead of the HCEs in the following study could more clearly describe the nature of electrolyte stability.In this work, we reveal the correlation between the solvation microstructures and the LUMO energy levels of typical ISC structures in the electrolytes at various MRs with non-film-forming lithium salt (LiClO₄) and organic carbonate solvents (PC, DMC, EMC and DEC) by ab initio molecular dynamics (AIMD) simulations and density functional theory (DFT) calculations. The choice of non-film-forming lithium salt and solvent in this study was aimed to exclude the contribution of the formation of the SEI film to the interfacial stability of the electrolytes. It is found from this study that the LUMO energy level of the ISC structure formed at a low MR is lower than that of pure solvent. With the increase of the MR, anions gradually enter into the first solvation shell of Li⁺ to form the anion-induced ISC (AI-ISC) structure, resulting in the increase of the LUMO energy level that enhances the reduction stability of the electrolyte. Also, it is revealed that the LUMO levels of ISC structures at different MRs are always situated at the coordinated solvent molecules, i.e., the strong reduction stability of HMREs is dominated by the modulation of solvent molecules rather than only the formation of the anion-derived SEI. Such a theoretical insight is further unequivocally evidenced by chemical compatibility experiments in this work. These findings reveal the origin of the greatly improved interfacial stability of HMREs and provide a mechanistic insight into the rational design of stable electrolytes for new generation alkali or alkaline metal based batteries.To investigate the specific ISC microstructures of the electrolytes with different MRs, AIMD simulations were first performed (see computational details in the ESI^†). Taking non-film-forming DEC solvent as an example, three types of electrolytes with MRs of LiClO₄ to DEC = 1 : 10, 1 : 5 and 1 : 2 are considered (Table S1^†). After long-time AIMD simulation, the representative images of the equilibrium structures are shown in Fig. 1a–c. To characterize the solution structures, the radial distribution function g(r) of the electrolyte with different MRs is analyzed (Fig. 1e–g), and the changes in the Li⁺ coordination number with the O atoms of solvents and anions are listed in Fig. 1d. In addition, it should be noted that the total coordination number of Li⁺ always remains around 4, which implies that the stable tetragonal solvation shell structure of Li⁺ does not change in the different MR electrolytes; meanwhile, both the coordination numbers of Li⁺ contributed by the solvent and anion change oppositely. This phenomenon can be corroborated experimentally through infrared spectroscopy (IR) because the C O bond of the carbonate group has a strong IR absorption in the carbonyl region (1650–1850 cm⁻¹) and its IR peak position shifts sensitively with its coordination environment. As shown in Fig. 1h, the IR band of carbonyl groups in pure DEC is located at ∼1741 cm⁻¹, which is shifted to ∼1710 cm⁻¹ in a LiClO₄/DEC (MR = 1 : 10) electrolyte due to the coordination of the O atom in C O with Li⁺. With the increase of the MR of Li⁺/DEC, its IR peak at ∼1741 cm⁻¹ gradually disappears, reflecting a gradual decrease in the number of free DEC molecules. In addition, the IR band of free ClO₄⁻ in a LiClO₄/DEC (MR = 1 : 10) electrolyte is located at ∼931 cm⁻¹, which is shifted to ∼942 cm⁻¹ in the 1 : 2 LiClO₄/DEC electrolyte due to the ionic association of Li⁺ and ClO₄⁻ (Fig. S1^†). Combining AIMD simulations and IR experiments, it can be concluded that with the increase of the MR of the electrolyte, the anions gradually enter into the solvation shell of Li⁺, which modulates the chemical stability of the electrolyte.Open in a separate windowFig. 1Snapshots of typical equilibrium trajectories from DFT-MD simulations: (a) 1 : 10 LiClO₄/DEC solution (2-LiClO₄/20-DEC), (b) 1 : 5 LiClO₄/DEC solution (3-LiClO₄/15-DEC) and (c) 1 : 2 LiClO₄/DEC solution (7-LiClO₄/14-DEC). (d) Typical ISC structure extracted from DFT-MD. (e–g) Radial distribution function of lithium–oxygen interaction (short dashed lines) and relationship between the coordination number and bond distances (full lines). (h) FTIR spectra of the carbonyl group in LiClO₄/DEC solution. Atom color: H, white; Li, purple; C, cyan; O, red; Cl, green.Coordination numbers (n(r)) of atom pairs of Li–O(DEC) and Li–O (ClO₄⁻) (cut-off length of r = 2.5 Å)

电解液添加剂硫酸亚乙酯对锂离子电池性能的影响

在1 mol/L LiPF₆/碳酸乙烯酯+碳酸二甲酯+碳酸甲乙酯（体积比1∶1∶1）电解液中,采用恒流充放电测试、循环伏安法（CV）、扫描电子显微镜（SEM）、能量散射光谱（EDS）、电化学阻抗谱（EIS）等测试技术,研究了添加剂硫酸亚乙酯（DTD）对锂离子电池性能及石墨化中间相碳微球（MCMB）电极/电解液界面性质的影响。 结果表明,在电解液中引入体积分数0.01%DTD后,MCMB/Li电池可逆放电容量从300 mA·h/g提高至350 mA·h/g,电池总阻抗降低,循环稳定性提高。CV测试发现,在首次还原过程中,DTD在电极电位1.4 V左右（vs Li/Li⁺）发生电化学还原,参与了MCMB电极表面固体电解质相界面膜（SEI膜）的形成过程。 同时,DTD对LiMn₂O₄电极性能无不良影响。     

Ion‐Conductive Properties of a Polymer Electrolyte Based on Ethylene Carbonate/Ethylene Oxide Random Copolymer

A random copolymer of ethylene oxide with CO₂, namely, poly(ethylene carbonate/ethylene oxide) (P(EC/EO)), has been synthesized as a novel candidate for polymer electrolytes. Electrolyte composed of P(EC/EO) and lithium bis(fluorosulfonyl)imide has an ionic conductivity of 0.48 mS cm⁻¹ and a Li transference number (t ₊) of 0.66 at 60 °C. To study ion‐conductive behavior of P(EC/EO)‐based electrolytes, the Fourier transform infrared (FT‐IR) technique is used to analyze the interactions between Li⁺ and functional groups of the copolymer. The carbonate groups may interact preferentially with Li⁺ rather than the ether groups in P(EC/EO). This study suggests that copolymerization of carbonate and flexible ether units can realize both high conductivity and t ₊ for polymer electrolytes. High‐performance P(EC/EO) electrolyte is expected to be a candidate material for use in all‐solid‐state batteries.

     

Highly Stable Lithium Metal Batteries Enabled by Regulating the Solvation of Lithium Ions in Nonaqueous Electrolytes

Safe and rechargeable lithium metal batteries have been difficult to achieve because of the formation of lithium dendrites. Herein an emerging electrolyte based on a simple solvation strategy is proposed for highly stable lithium metal anodes in both coin and pouch cells. Fluoroethylene carbonate (FEC) and lithium nitrate (LiNO₃) were concurrently introduced into an electrolyte, thus altering the solvation sheath of lithium ions, and forming a uniform solid electrolyte interphase (SEI), with an abundance of LiF and LiN_xO_y on a working lithium metal anode with dendrite‐free lithium deposition. Ultrahigh Coulombic efficiency (99.96 %) and long lifespans (1000 cycles) were achieved when the FEC/LiNO₃ electrolyte was applied in working batteries. The solvation chemistry of electrolyte was further explored by molecular dynamics simulations and first‐principles calculations. This work provides insight into understanding the critical role of the solvation of lithium ions in forming the SEI and delivering an effective route to optimize electrolytes for safe lithium metal batteries.     

Fluoroethylene Carbonate Enabling a Robust LiF‐rich Solid Electrolyte Interphase to Enhance the Stability of the MoS2 Anode for Lithium‐Ion Storage

As a high‐capacity anode for lithium‐ion batteries (LIBs), MoS₂ suffers from short lifespan that is due in part to its unstable solid electrolyte interphase (SEI). The cycle life of MoS₂ can be greatly extended by manipulating the SEI with a fluoroethylene carbonate (FEC) additive. The capacity of MoS₂ in the electrolyte with 10 wt % FEC stabilizes at about 770 mAh g^?1 for 200 cycles at 1 A g^?1, which far surpasses the FEC‐free counterpart (ca. 40 mAh g^?1 after 150 cycles). The presence of FEC enables a robust LiF‐rich SEI that can effectively inhibit the continual electrolyte decomposition. A full cell with a LiNi_0.5Co_0.3Mn_0.2O₂ cathode also gains improved performance in the FEC‐containing electrolyte. These findings reveal the importance of controlling SEI formation on MoS₂ toward promoted lithium storage, opening a new avenue for developing metal sulfides as high‐capacity electrodes for LIBs.     

Investigation of interfacial processes in graphite thin film anodes of lithium-ion batteries by both in situ and ex situ infrared spectroscopy

Graphite thin film anodes with a high IR reflectivity have been prepared by a spin coating method. Both ex situ and in situ microscope FTIR spectroscopy (MFTIRS) in a reflection configuration were employed to investigate interfacial processes of the graphite thin film anodes in lithium-ion batteries. A solid electrolyte interphase layer (SEI layer) was formed on the cycled graphite thin film anode. Ex situ MFTIRS revealed that the main components of the SEI layer on cycled graphite film anodes in 1 mol L -1 LiPF6 /ethylene carbonate + dimethyl carbonate (1:1) are alkyl lithium carbonates (ROCO2 Li). The desolvation process on graphite anodes during the initial intercalation of lithium ion with graphite was also observed and analyzed by in situ MFTIRS.     

Solvent Molecule Cooperation Enhancing Lithium Metal Battery Performance at Both Electrodes

Developing electrolytes compatible with efficient and reversible cycling of electrodes is critical to the success of rechargeable Li metal batteries (LMBs). The Coulombic efficiencies and cycle lives of LMBs with ethylene carbonate (EC), dimethyl carbonate, ethylene sulfite (ES), and their combinations as electrolyte solvents show that in a binary‐solvent electrolyte the extent of electrolyte decomposition on the electrode surface is dependent on the solvent component that dominates the solvation sheath of Li⁺. This knowledge led to the development of an EC‐ES electrolyte exhibiting high performance for Li||LiFePO₄ batteries. Carbonate molecules occupy the solvation sheath and improve the Coulombic efficiencies of both the anode and cathode. Sulfite molecules lead to desirable morphology and composition of the solid electrolyte interphase and extend the cycle life of the Li metal anode. The cooperation between these components provides a new example of electrolyte optimization for improved LMBs.     

五种1-烷基-2,3-二甲基咪唑型离子液体的合成及作为Li/LiFeO_4电池电解液的研究

合成了五种新的1-烷基-2,3-二甲基咪唑二(三氟甲基磺酰)亚胺离子液体(alkyl-DMimTFSI).以离子液体作为Li/LiFeO4电池电解液,分别考察不同烷基(正丁基、正戊基、正辛基、异辛基和正癸基)对电解液理化性质、界面性质和电池行为的影响.结果表明离子液体的电化学窗口都可以达到5.6V(-0.4～5.2Vvs.Li+/Li),显示它们具有较好的电化学稳定性.加入碳酸亚乙烯酯作为添加剂后,离子液体电解液在Li负极形成稳定的固体电解质相界面膜(SEI),从而提高了Li负极的稳定性,保护了Li片不受腐蚀.电化学阻抗和循环伏安分析进一步揭示LiFeO4正极与离子液体电解液也有良好的兼容性.此外,研究还表明离子液体中烷基种类严重影响它们的电池行为.采用butyl-DMimTFSI和amyl-DMimTFSI电解液体系的电池充放电容量和可逆性明显优于另外三种离子液体,它们的首次放电容量分别达到145和152.6mAh/g,并表现出良好的充放电循环性能.因粘度最大,采用isooctyl-DMimTFSI电解液的电池首次放电容量仅为8.3mAh/g,但添加碳酸丙烯酯(质量比1∶1)稀释后首次放电容量上升至132.4mAh/g.     

An Artificial Lithium Protective Layer that Enables the Use of Acetonitrile‐Based Electrolytes in Lithium Metal Batteries

The resurgence of the lithium metal battery requires innovations in technology, including the use of non‐conventional liquid electrolytes. The inherent electrochemical potential of lithium metal (?3.04 V vs. SHE) inevitably limits its use in many solvents, such as acetonitrile, which could provide electrolytes with increased conductivity. The aim of this work is to produce an artificial passivation layer at the lithium metal/electrolyte interface that is electrochemically stable in acetonitrile‐based electrolytes. To produce such a stable interface, the lithium metal was immersed in fluoroethylene carbonate (FEC) to generate a passivation layer via the spontaneous decomposition of the solvent. With this passivation layer, the chemical stability of lithium metal is shown for the first time in 1 m LiPF₆ in acetonitrile.     

A new approach toward improved low temperature performance of Li-ion battery

We report a new approach toward formulating an electrolyte for low temperature operation of Li-ion batteries. The core of this new approach is to use LiBF₄ salt instead of LiPF₆, which is the chosen solute in the state-of-the-art Li-ion electrolytes. We found that although LiBF₄-based electrolyte has lower ionic conductivity than the LiPF₆ analogue, it provides improved low temperature performance. In particular, at −30 °C, a Li-ion cell with 1 m (mol/kg solvent) LiBF₄ dissolved in 1:1:3 (wt.) propylene carbonate (PC)/ethylene carbonate (EC)/ethylmethyl carbonate (EMC) mixed solvent delivers as high as 86% of capacity, in comparison to that obtained at 20 °C. Whereas the counterpart one, using LiPF₆, only retains 72%. Furthermore, the cell with LiBF₄-based electrolyte shows lower polarization at −30 °C. The above results suggest that the ionic conductivity of the electrolyte is not the only limitation to the low temperature operation of Li-ion batteries. Analysis of cell impedance reveals that the improved low temperature performance by LiBF₄ arises from a reduced charge-transfer resistance.