Proteomics based on selecting and quantifying cysteine containing peptides by covalent chromatography

This paper describes a procedure in which cysteine containing peptides from tryptic digests of complex protein mixtures were selected by covalent chromatography based on thiol-disulfide exchange. identified by mass spectrometry, and quantified by differential isotope labeling. Following disruption of disulfide bridges with 2,2'-dipyridyl disulfide, all proteins were digested with trypsin and acylated with succinic anhydride. Cysteine containing peptides were then selected from the acylated digest by disulfide interchange with sulfhydryl groups on a thiopropyl Sepharose gel. Captured cysteine containing peptides were released from the gel with 25 mM dithiothreitol (pH 7.5) containing 1 mM (ethylenedinitrilo)tetraacetic acid disodium salt and alkylated with iodoacetic acid subsequent to fractionation by reversed-phase liquid chromatography (RPLC). Fractions collected from the RPLC column were analyzed by matrix-assisted laser desorption ionization mass spectrometry. Based on isotope ratios of peptides from experimental and control samples labeled with succinic and deuterated succinic anhydride, respectively, it was possible to determine the relative concentration of each peptide species between the two samples. Peptides obtained from proteins that were up-regulated in the experimental sample were easily identified by an increase of the relative amount of the deuterated peptide. The results of these studies indicate that by selecting cysteine containing peptides, the complexity of protein digest could be reduced and database searches greatly simplified. When coupled with the isotope labeling strategy for quantification it was possible to determine proteins that were up-regulated in plasmid bearing Escherichia coli when expression of plasmid proteins was induced. Up-regulation of several proteins of E. coli origin was also noted.     

Signature-peptide approach to detecting proteins in complex mixtures

The objective of the work presented in this paper was to test the concept that tryptic peptides may be used as analytical surrogates of the protein from which they were derived. Proteins in complex mixtures were digested with trypsin and classes of peptide fragments selected by affinity chromatography, lectin columns were used in this case. Affinity selected peptide mixtures were directly transferred to a high-resolution reversed-phase chromatography column and further resolved into fractions that were collected and subjected to matrix-assisted laser desorption ionization (MALDI) mass spectrometry. The presence of specific proteins was determined by identification of signature peptides in the mass spectra. Data are also presented that suggest proteins may be quantified as their signature peptides by using isotopically labeled internal standards. Isotope ratios of peptides were determined by MALDI mass spectrometry and used to determine the concentration of a peptide relative to that of the labeled internal standard. Peptides in tryptic digests were labeled by acetylation with acetyl N-hydroxysuccinimide while internal standard peptides were labeled with the trideuteroacetylated analogue. Advantages of this approach are that (i) it is easier to separate peptides than proteins, (ii) native structure of the protein does not have to be maintained during the analysis, (iii) structural variants do not interfere and (iv) putative proteins suggested from DNA databases can be recognized by using a signature peptide probe.     

Automated signature peptide approach for proteomics

This paper addresses the issue of automating the multidimensional chromatographic, signature peptide approach to proteomics. Peptides were automatically reduced and alkylated in the autosampler of the instrument. Trypsin digestion of all proteins in the sample was then executed on an immobilized enzyme column and the digest directly transferred to an affinity chromatography column. Although a wide variety of affinity columns may be used, the specific column used in this case was a Ga(III) loaded immobilized metal affinity chromatography (IMAC) column. Ga(III)-IMAC is known to select phosphorylated peptides. Phosphorylated peptides selected by the affinity column from tryptic digests of milk were automatically transferred to a reversed-phase liquid chromatography (RPLC) column. Further fractionation of tryptic peptides on the RPLC column was achieved with linear solvent gradient elution. Effluent from the RPLC column was electrosprayed into a time-of-flight mass spectrometer. The entire process was controlled by software in the liquid chromatograph. With slight modification, it is possible to add multiple columns in parallel at any of the single column positions to further increase throughput. Total analysis time in the tandem column mode of operation was under 2 h.     

基于共价色谱分离的含半胱氨酸肽段富集策略

多维色谱分离、串联质谱分析技术已在蛋白质组研究中得到广泛应用。然而生物样品的蛋白质以及全酶切肽段具有高度的复杂性,这严重干扰了蛋白质高通量、规模化的分析。通过标签肽段富集进行样品预分离可以降低体系的复杂程度。本文建立了一种基于共价色谱技术选择性分离富集含半胱氨酸肽的方法,从而降低了样品体系的复杂程度。首先以牛血清白蛋白(BSA)的酶切肽段为模型,对富集条件进行了优化和考察,并在此基础上通过5种蛋白质酶切肽段混合物的富集对该方法进行了验证。结果证明此方法的重现性好,富集效率高,富集特异性好,能有效地富集鉴定含半胱氨酸肽段。所建立的方法在复杂体系的蛋白质组研究中具有广泛的应用前景,为复杂样品的蛋白质高通量、自动化、规模化鉴定和定量研究提供了实用技术。     

Automation of nanoflow liquid chromatography-tandem mass spectrometry for proteome and peptide profiling analysis by using a monolithic analytical capillary column

An automated nano-LC-MS/MS platform without trap column was established, which only used a 20 cm lauryl methacrylate-ethylene dimethacrylate (LMA-EDMA) monolithic capillary column to allow preconcentration and separation of peptides. The monolithic column had the advantages of good permeability and low backpressure resulting in higher flow rates for capillary columns. Tryptic digests of bovine albumin and yeast protein extract were tested using the monolithic column system. High proteomic coverage using this approach were demonstrated in this study. Furthermore, peptide samples extracted from mouse liver were separated by using the monolithic column system combined with size-exclusion chromatography prefractionation. This monolithic column system might be a promising alternative for the automated system previously using a trap column for routine proteome and peptide profiling analysis.     

Cysteine‐reactive covalent capture tags for enrichment of cysteine‐containing peptides

Considering the tremendous complexity and the wide dynamic range of protein samples from biological origin and their proteolytic peptide mixtures, proteomics largely requires simplification strategies. One common approach to reduce sample complexity is to target a particular amino acid in proteins or peptides, such as cysteine (Cys), with chemical tags in order to reduce the analysis to a subset of the whole proteome. The present work describes the synthesis and the use of two new cysteinyl tags, so‐called cysteine‐reactive covalent capture tags (C³T), for the isolation of Cys‐containing peptides. These bifunctional molecules were specifically designed to react with cysteines through iodoacetyl and acryloyl moieties and permit efficient selection of the tagged peptides. To do so, a thioproline was chosen as the isolating group to form, after a deprotection/activation step, a thiazolidine with an aldehyde resin by the covalent capture (CC) method. The applicability of the enrichment strategy was demonstrated on small synthetic peptides as well as on peptides derived from digested proteins. Mass spectrometric (MS) analysis and tandem mass spectrometric (MS/MS) sequencing confirmed the efficient and straightforward selection of the cysteine‐containing peptides. The combination of C³T and CC methods provides an effective alternative to reduce sample complexity and access low abundance proteins. Copyright © 2009 John Wiley & Sons, Ltd.     

Easy amino acid sequencing of sulfonated peptides using post-source decay on a matrix-assisted laser desorption/ionization time-of-flight mass spectrometer equipped with a variable voltage reflector

Tryptic peptides were labeled with sulfonic acid groups at the N-termini using an improved chemistry. The derivatization was performed in common aqueous buffers on peptides adsorbed onto a ZipTip trade mark C(18), thus allowing simultaneous desalting/concentration of the sample. When only Arg-terminating peptides were considered, the procedure from adsorption onto the ZipTip until analysis by MALDI-PSD took about 10 min and several samples could be worked on in parallel. The resulting improved post-source decay (PSD) fragmentation produced spectra containing only y-ions. PSD amino acid sequencing of underivatized and derivatized synthetic peptides was compared. From the sequence information obtained from derivatized peptides isolated by ion selection from tryptic in-gel digests, a protein was correctly identified which was difficult to analyze from an unclear peptide mass fingerprint analysis. The method was also applied to the identification and localization of phosphorylated Ser and Tyr residues in native and synthetic peptides.     

Mixed-mode chromatography for fractionation of peptides, phosphopeptides, and sialylated glycopeptides

A mixed-mode chromatographic (MMC) sorbent was prepared by functionalizing the silica sorbent with a pentafluorophenyl (PFP) ligand. The resulting stationary phase provided a reversed-phase (RP) retention mode along with a relatively mild strong cation-exchange (SCX) retention interaction. While the mechanism of interaction is not entirely clear, it is believed that the silanols in the vicinity of the perfluorinated ligand act as strongly acidic sites. The 2.1 mm x 150 mm column packed with such sorbent was applied to the separation of peptides. Linear RP gradients in combination with salt steps were used for pseudo two-dimensional (2D) separation and fractionation of tryptic peptides. An alternative approach of using linear cation-exchange gradients combined with RP step gradients was also investigated. Besides the attractive forces, the ionic repulsion contributed to the retention mechanism. The analytes with strong negatively charged sites (phosphorylated peptides, sialylated glycopeptides) eluted in significantly different patterns than generic tryptic peptides. This retention mechanism was employed for the isolation of phosphopeptides or sialylated glycopeptides from non-functionalized peptide mixtures. The mixed-mode column was utilized in conjunction with a phosphopeptide enrichment solid phase extraction (SPE) device packed with metal oxide affinity chromatography (MOAC) sorbent. The combination of MOAC and mixed-mode chromatography (MMC) provided for an enhanced extraction selectivity of phosphopeptides and sialylated glycopeptides peptides from complex samples, such as yeast and human serum tryptic digests.     

Differential labeling of free and disulfide-bound thiol functions in proteins

A method for the simultaneous determination of the number of free cysteine groups and disulfide-bound cysteine groups in proteins has been developed based on the sequential labeling of free and bound thiol functionalities with two ferrocene-based maleimide reagents. Liquid chromatography/electrochemistry/mass spectrometry was used to assign the N-(2-ferroceneethyl)maleimide (FEM) labeled free cysteine functionalities in a tryptic digest mixture, whereas a precursor ion scan enables the detection of peptides with ferrocenecarboxylic acid-(2-maleimidoyl)ethylamide (FMEA) labeled disulfide-bound cysteine groups after reduction. Fragment spectra of the labeled peptides yield an excellent coverage of b-type and y-type ions. The ferrocene labeled cysteines were fragmented as 412 Da (FEM) and 455 Da (FMEA). These fragment masses are significantly higher than unlabeled amino acids or dipeptides and are easily detected. The position of free and disulfide-bound cysteine may therefore be assigned in an amino acid sequence.     

Highly efficient and selective enrichment of peptide subsets combining fluorous chemistry with reversed‐phase chromatography

The selective capture of target peptides poses a great challenge to modern chemists and biologists, especially when enriching them from proteome samples possessing extremes in concentration dynamic range and sequence diversity. While approaches based on traditional techniques such as biotin‐avidin pairing offer versatile tools to design strategies for selective enrichment, problems are still encountered due to sample loss or poor selectivity of enrichment. Here we show that the recently introduced fluorous chemistry approach has attractive properties as an alternative method for selective enrichment. Through appending a perfluorine group to the target peptide, it is possible to dramatically increase the peptide's hydrophobicity and thus enable facile separation of labeled from non‐labeled peptides. Use of reversed‐phase chromatography allowed for improved peptide recovery in comparison with results obtained using the formerly reported fluorous bonded phase methods. Furthermore, this approach also allowed for on‐line separation and identification of both labeled and unlabeled peptides in a single experiment. The net result is an increase in the confidence of protein identification by tandem mass spectrometry (MS²) as all peptides and subsequent information are retained. Successful off‐line and on‐line enrichment of cysteine‐containing peptides was obtained, and high quality MS² spectra were obtained by tandem mass spectrometry due to the stability of the tag, allowing for facile identification via standard database searching. We believe that this strategy holds great promise for selective enrichment and identification of low abundance target proteins or peptides. Copyright © 2009 John Wiley & Sons, Ltd.     

Peptide maps at picomolar levels obtained by reversed-phase high-performance liquid chromatography and pre-column derivatization with phenyl isothiocyanate. Microsequencing of Phenylthiocarbamyl Peptides

A new reversed-phase high-performance liquid chromatography approach to the production of analytical peptide maps by pre-column derivatization using phenylisothiocyanate is described. Tryptic peptide digests were derivatized with phenyl isothiocyanate to form the phenylthiocarbamyl peptides followed by reversed-phase high-performance liquid chromatographic analysis. The phenylthiocarbamyl peptides were separated by reversed-phase high-performance liquid chromatography with the conventional gradient elution system of water-acetonitrile containing trifluoroacetic acid. The sensitivity of detection of these peptide derivatives was within the range 5-10 pmol with a constant baseline at 254-260 nm. The isolated phenylthiocarbamyl peptides can be subjected to automatic Edman degradation. The effectiveness of this method was exemplified by microsequencing of phenylthiocarbamyl peptides isolated from tryptic digests of three different proteins: alpha-lactalbumin, beta-lactoglobulin and a lambda light-chain immunoglobulin.     

Effective detection of peptides containing cysteine sulfonic acid using matrix-assisted laser desorption/ionization and laser desorption/ionization on porous silicon mass spectrometry

Cysteine sulfonic acid-containing peptides, being typical acidic peptides, exhibit low response in matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. In this study, matrix conditions and the effect of diammonium hydrogencitrate (DAHC) as additive were investigated for ionization of cysteine sulfonic acid-containing peptides in MALDI. A matrix-free ionization method, desorption/ionization on porous silicon (DIOS), was also utilized to evaluate the effect of DAHC. When equimolar three-component mixtures of peptides carrying free cysteine, cysteine sulfonic acid, and carbamidomethyl cysteine were measured by MALDI using a common matrix, alpha-cyano-4-hydroxycinnamic acid (CHCA), no signal corresponding to cysteine sulfonic acid-containing peptide could be observed in the mass spectrum. However, by addition of DAHC to CHCA, the peaks of cysteine sulfonic acid-containing peptides were successfully observed, as well as when using 2,4,6-trihydroxyacetophenone (THAP) and 2,6-dihydroxyacetophenone with DAHC. In the DIOS mass spectra of these analytes, the use of DAHC also enhanced the peak intensity of the cysteine sulfonic acid-containing peptides. On the basis of studies with these model peptides, tryptic digests of oxidized peroxiredoxin 6 were examined as a complex peptide mixture by MALDI and DIOS. In MALDI, the peaks of cysteine sulfonic acid-containing peptides were observed when using THAP/DAHC as the matrix, but this was not so with CHCA. In DIOS, the signal from cysteine sulfonic acid-containing peptides was suppressed; however, the use of DAHC significantly enhanced the signal intensity with an increase in the number of observed peptides and increased signal-to-noise ratio in the DIOS spectra. The results show that DAHC in the matrix or on the DIOS chip decreases discrimination and suppression effects in addition to suppressing alkali-adduct ions, which leads to a beneficial effect on protonation of peptides containing cysteine sulfonic acid.     

Purification and characterization of carbohydrate-binding peptides from Lotus tetragonolobus and Ulex europeus seed lectins using affinity chromatography.

Carbohydrate-binding peptides of several anti-H(O) leguminous lectins were obtained from endoproteinase Asp-N or Lys-C digests of L-fucose-binding Lotus tetragonolobus lectin (LTA) and Ulex europeus lectin I (UEA-I) and from that of a di-N-acetylchitobiose-binding Ulex europeus lectin II (UEA-II) by affinity chromatography on columns of Fuc-Gel (for LTA and UEA-I) and on a column of a mixture of several oligomers of N-acetyl-D-glucosamine (GlcNAc) coupled to Sepharose 4B (GlcNAc oligomer-Sepharose 4B) (for UEA-II). These peptides were retained on the Fuc-Gel or GlcNAc oligomer-Sepharose 4B column and were presumed to have an affinity for the columns. The amino acid sequences of the retarded peptides were determined using a protein sequencer.     

Voltammetric Determination of Surface‐Confined Biomolecules with N‐(2‐Ethyl‐ferrocene)maleimide

A thiol‐specific electroactive cross‐linker, N‐(2‐ethyl‐ferrocene)maleimide (Fc‐Mi), has been used to tag surface‐confined peptides containing cysteine residues or oligodeoxynucleotides (ODNs) whose 3′ ends have been modified with thiol groups. The peptides studied herein include both the oxidized and reduced forms of glutathione and a hexapeptide. Cyclic voltammograms (CVs) of the Fc‐Mi groups attached to the surfaces were used to quantify the total number of cysteine residues that are tagged and/or can undergo facile electron transfer reactions with the underlying electrodes. A quartz crystal microbalance was used in conjunction with CV to estimate the total number of cysteine groups labeled by Fc‐Mi per peptide molecule. By comparing to mass spectrometric studies, it is confirmed that not all of the Fc‐Mi linked to the cysteine groups can participate in the electron transfer reactions. The methodology is further extended to the determination of ODN samples in a sandwich assay wherein the thiol linker on the 3′ end can be tagged with Fc‐Mi. The analytical performance was evaluated through determinations of a complementary ODN target and targets with varying numbers of mismatching bases. ODN samples as low as 10 fmol can be detected. Such a low detection level is remarkable considering that no signal amplification scheme is involved in the current method. The approach is shown to be sequence‐ and/or structure‐specific and does not require sophisticated instrumentation and complex experimental procedure.     

Protein proteolysis and the multi-dimensional electrochromatographic separation of histidine-containing peptide fragments on a chip

This paper reports a system for three-dimensional electrochromatography in a chip format. The steps involved included trypsin digestion, copper(II)-immobilized metal affinity chromatography [Cu(II)-IMAC] selection of histidine-containing peptides, and reversed-phase capillary electrochromatography of the selected peptides. Trypsin digestion and affinity chromatography were achieved in particle-based columns with a microfabricated frit whereas reversed-phase separations were executed on a column of collocated monolithic support structures. Column frits were designed to maintain constant cross sectional area and path length in all channels and to retain particles down to a size of 3 microm. Cu(II)-IMAC selection of histidine-containing peptides from standard peptide mixtures and protein digests followed by reversed-phase chromatography of the selected peptides was demonstrated in the electrochromatography mode. The possibility to run a comprehensive proteomic analysis by combining trypsin digestion, affinity selection, and a reversed-phase separation on chips was shown using fluorescein isothiocyanate-labeled bovine serum albumin as an example.     

Preparation of a butyl–silica hybrid monolithic column with a “one-pot” process for bioseparation by capillary liquid chromatography

A butyl–silica hybrid monolithic column for bioseparation by capillary liquid chromatography (cLC) was prepared with butyl methacrylate and alkoxysilanes through a “one-pot” process. The effects of polycondensation temperature, volume percentage of N,N′-dimethylformamide, and content of cetyltrimethylammonium bromide and butyl methacrylate on the morphologies of the hybrid monolithic columns prepared were investigated in detail. Baseline separations of proteins and small peptides on the hybrid monolithic column were achieved by cLC with gradient elution. In addition, the resulting hybrid column was also applied for analysis of tryptic digests of bovine serum albumin by cLC coupled with tandem mass spectrometry. The results demonstrate its potential application in separation of complex biological samples.     

Nanoliter capillary electrochromatography columns based on collocated monolithic support structures molded in poly(dimethyl siloxane).

Following current trends in miniaturization of analytical chemistry, an inexpensive disposable analytical tool in the form of a liquid chromatography column fabricated on a poly(dimethyl siloxane) (PDMS) chip was created. Ease of fabricating the chromatography column was demonstrated by molding collocated monolithic support structures (COMOSS) directly in the column. Positive photo-resist, SPR 220, was used to create column structures on a negative relief master providing final channel dimensions of 2.7-5.2 microm wide by 10.0 microm deep, while monolithic dimensions were 9.8 x 9.8 x 10.0 microm - 12.3 x 12.3 x 10.0 microm. The ability to separate biological samples such as peptides from a tryptic digest of fluorescein isothiocyanate labeled bovine serum albumin (FITC-BSA) was shown. Separations in capillary electrochromatographic (CEC) mode were performed yielding column efficiencies of 4.0 x 10(5) plates/m.     

Contributions of commercial sorbents to the selectivity in immobilized metal affinity chromatography with Cu(II)

Immobilized copper(II) affinity chromatography [Cu(II)-immobilized metal affinity chromatography (IMAC)] has been used in proteomics to simplify sample mixtures by selecting histidine-containing peptides from proteolytic digests. This paper examines the specificity of four different support materials with an iminodiacetic acid (IDA) stationary phase in the selection of only histidine-containing peptides in the single step capture-release mode. Three of the sorbents examined were commercially available: HiTrap Chelating HP (agarose), TSK Chelate-5PW, and Poros 20MC. IDA was also immobilized on CIM discs (monolithic glycidylmethacrylate-ethylene dimethacrylate). Tryptic digests of transferrin and beta-galactosidase were used as model samples to evaluate these sorbents. It was found that among the examined matrices, the TSK Chelate-5PW sorbent bound histidine-containing peptides the strongest, while Poros matrix was found to have a high degree of non-specific bindings. Agarose-based columns showed relatively high selectivity and specificity.     

High-performance liquid chromatographic analysis of glutathione and its thiol and disulfide degradation products

A rapid and sensitive high-performance liquid chromatographic method for quantitation of picomole levels of glutathione, glutathione disulfide, cysteine, cystine, cysteinylglycine, cysteinylglycine disulfide and cysteine glutathione-mixed disulfide in biological samples is described. The compounds were separated isocratically on a reversed-phase column by ion-pair chromatography. The mobile phase consisted of an aqueous buffer containing 0.1 M monochloroacetic acid and 3.3 mM 1-heptanesulfonic acid (pH 2.60)-methanol-N,N-dimethylformamide (96.5:3.0:0.5). After chromatographic separation, the disulfides were reduced by a potential (-1.0 V) from a battery, with subsequent detection of all thiols by electrochemical oxidation (+0.15 V) with a dual gold-mercury electrode. Thiol and disulfide concentrations were determined in tissue extracts (liver and kidney) and fluids (bile and plasma) from control rats and rats treated with acivicin, an inhibitor of gamma-glutamyltranspeptidase. A marked increase in biliary glutathione concentration was observed in treated animals with a corresponding decrease in cysteine and cysteinylglycine concentrations. The results demonstrate that this method is useful for measuring glutathione and its degradation products in tissues and fluids.     

Pyrylium‐based dye and charge tagging in proteomics

The pyrylium group is a selective reagent for ε‐amino groups in proteins. In particular, for fluorescence labeling, a number of advantages over traditional N‐hydroxysuccinimidyl ester chemistry were recognized such as the rapid prestaining procedure. Here, we have investigated the labeling reaction for the fluorogenic pyrylium dye Py‐1 using liquid chromatography coupled to MS with the aim of determining its specificity and possible side products. Peptides containing no, one, and two lysine residue and a choice of no or one cysteine residue were labeled with Py‐1 at yields > 30%. Gas phase fragmentation proved both labeling of lysine residues as well as that of the N‐terminus also in peptides that contained a lysine residue. Evidence for cysteine labeling was not found, but several other products were detected such as the results of rearrangements with adjacent acidic amino acids. Apart from the use as a fluorogenic label, Py‐1 recommends itself for N‐terminal charge tagging as alternative to the commonly used quaternary ammonium salts. Predominantly a‐ and b‐type ion series were observed for N‐terminally labeled peptides. Further applications include chromophore tagging since the labeled product is not only fluorescent but also colored red.