Preparation of Cu (II)/PEI–QPEI/SiO2 nanopowder as antibacterial material

The silica nanoparticles were prepared by the sol–gel process, and then twice modified and grafted by polyethylenimine (PEI) on their surface. After quaternary ammonium reaction and chelated copper reaction, the PEI/SiO₂, QPEI/SiO₂, PEI–QPEI/SiO₂ and Cu (II)/PEI–QPEI/SiO₂ nanopowders were obtained in turn. The morphology and structure of the products were characterized through SEM, EDX, HRTEM, FTIR and element analysis. At the same time, the antibacterial activity of the products to E. coli and Candida were evaluated through quantification and qualitative ways, e.g. microcalorimetric method and culture dish method. The results suggested that the Cu (II)/PEI–QPEI/SiO₂, a novel three-component functional nanopowder, presented the best antibacterial activity to both E. coli and Candida duo to the synergistic sterilization capability of the ammonium salt and copper ions, compared with other products. It indicated that the Cu (II)/PEI–QPEI/SiO₂ nanopowder could be a novel antibacterial nanomaterial to widely application in preventing and minimizing bacteria of the organism and environment in future.     

Kinetics and possible mechanism of hydrogen chloride oxidation over supported copper-containing salt catalysts: II. Kinetics of HCl oxidation in the deacon and methane oxychlorination reactions over the CuCl2-KCl-LaCl3 catalyst

The kinetics of HCl oxidation at 350–425°C over the supported CuCl₂-KCl-LaCl₃ catalyst has been investigated using a gradientless technique. The HCl oxidation kinetics in the Deacon and methane oxychlorination reactions has been studied in order to substantially extend the \(Cl_2 \left( {P_{Cl_2 } } \right)\) partial pressure variation range. When the reaction rate is independent of P _HCl, HCl oxidation on the copper-potassium catalysts is described by the same rate equation, irrespective of whether the catalyst contains lanthanum or not. The introduction of lanthanum chloride increases the HCl oxidation rate by one order of magnitude. The rate equation obtained has significant advantages over the equation corresponding to the Kenney-Slama equation. The kinetic features of HCl oxidation over the lanthanum-containing catalyst, whether the process depends on P _HCl or not, can be explained in terms of the superposition of the Kenney-Slama dissociative mechanism and the catalytic mechanism suggested here. The role of lanthanum chloride in both HCl oxidation pathways is considered.     

Solid-phase microextraction/gas chromatography–mass spectrometry method optimization for characterization of surface adsorption forces of nanoparticles

A complete characterization of the different physico-chemical properties of nanoparticles (NPs) is necessary for the evaluation of their impact on health and environment. Among these properties, the surface characterization of the nanomaterial is the least developed and in many cases limited to the measurement of surface composition and zetapotential. The biological surface adsorption index approach (BSAI) for characterization of surface adsorption properties of NPs has recently been introduced (Xia et al. Nat Nanotechnol 5:671–675, 2010; Xia et al. ACS Nano 5(11):9074–9081, 2011). The BSAI approach offers in principle the possibility to characterize the different interaction forces exerted between a NP's surface and an organic—and by extension biological—entity. The present work further develops the BSAI approach and optimizes a solid-phase microextraction gas chromatography–mass spectrometry (SPME/GC-MS) method which, as an outcome, gives a better-defined quantification of the adsorption properties on NPs. We investigated the various aspects of the SPME/GC-MS method, including kinetics of adsorption of probe compounds on SPME fiber, kinetic of adsorption of probe compounds on NP's surface, and optimization of NP's concentration. The optimized conditions were then tested on 33 probe compounds and on Au NPs (15 nm) and SiO₂ NPs (50 nm). The procedure allowed the identification of three compounds adsorbed by silica NPs and nine compounds by Au NPs, with equilibrium times which varied between 30 min and 12 h. Adsorption coefficients of 4.66?±?0.23 and 4.44?±?0.26 were calculated for 1-methylnaphtalene and biphenyl, compared to literature values of 4.89 and 5.18, respectively. The results demonstrated that the detailed optimization of the SPME/GC-MS method under various conditions is a critical factor and a prerequisite to the application of the BSAI approach as a tool to characterize surface adsorption properties of NPs and therefore to draw any further conclusions on their potential impact on health. Graphical Abstract

The basic principle of SPME/GC-MS method for characterization of nanoparticles surface adsorption forces     

Melt miscibility of HDPE/UHMWPE,LDPE/UHMWPE,and LLDPE/UHMWPE blends detected by dynamic rheometer

The dynamic rheological behavior of high density polyethylene (HDPE)/ultrahigh molecular weight polyethylene (UHMWPE) blends, low density polyethylene (LDPE)/UHMWPE blends and linear low density polyethylene (LLDPE)/ UHMWPE blends was measured in parallel plate rheometer at 200°C. The analysis of log-additivity rule, Cole-Cole plots and Han curves of the three series blends indicated that the LDPE/UHMWPE blends were miscible in the melt, while the HDPE/UHMWPE blends and LLDPE/UHMWPE blends showed phase separation. The DSC results of LLDPE/UHMWPE blends and HDPE/UHMWPE blends were consistent with the rheological properties, while for the thermal properties of LDPE/UHMWPE blends, results revealed three endothermic peaks, which indicated a liquid-solid phase separation in LDPE/UHMWPE blends.     

Thermally stimulated discharge current (TSDC) characteristics in β-phase PVDF–BaTiO3 nanocomposites

β-phase polyvinylidene fluoride (PVDF)–BaTiO₃ nanocomposite samples have been prepared by solution mixing method. XRD data represent that the crystallinity of PVDF decreases with increase in loading level of BaTiO₃ nanoparticles. DSC curve represents that the melting point of PVDF is lightly affected by loading concentration of BaTiO₃. The morphology and microstructure of PVDF and PVDF embedded by BaTiO₃ nanofillers were investigated by using inverted contrast microscopy (ICM) and scanning electron microscopy (SEM). FTIR interferrometry is proven that PVDF and BaTiO₃ are not chemically interacting; therefore, interaction of BaTiO₃ is van der Waals type of interaction. The thermally stimulated discharge current (TSDC) of PVDF and PVDF–BaTiO₃ nanocomposites sample was characterized by single peak. The observed TSDC peak is discussed on the basis of dipolar and interfacial polarization.     

A sensor based on incorporating Ni2+ into ZnO nanoparticles-multi wall carbon nanotubes-poly methyl metacrylat nanocomposite film modified carbon paste electrode for determination of carbohydrates

The ZnO nanoparticles (ZnONPs) were synthesized with gelatin as stabilizer via the sol-gel method and were characterized by transmission electron microscope (TEM), scanning electron microscopy (SEM) and X-ray diffraction (XRD). An electrochemical sensor based on ZnO nanoparticles-multi wall carbon nanotubes-poly methyl metacrylat (ZnONPs-MWCNT-PMMA) composite film was developed by incorporating Ni²⁺ into the ZnONPs-MWCNT-PMMA film modified carbon paste electrode (Ni²⁺/ZnONPs-MWCNT-PMMA/CPE). The electrochemical activity of Ni²⁺/ZnONPs-MWCNT-PMMA/CPE was illustrated in 0.10 M NaOH using cyclic voltammetry. The Ni²⁺/ZnONPs-MWCNT-PMMA/CPE exhibits the characteristic of improved reversibility and enhanced current responses of the Ni(III)/Ni(II) couple. Ni²⁺/ZnONPs-MWCNT-PMMA/CPE also show good electrocatalytic activity toward the oxidation of carbohydrates (glucose, fructose and sorbitol). The Ni²⁺/ZnONPs-MWCNT-PMMA/CPE gives a good linear range with a detection limit of 8, 6, and 9 μM towards the determination of glucose, fructose and sorbitol, respectively by amperometry. Furthermore, the modified sensor was successfully applied to the sensitive determination of carbohydrates in real samples.     

Facile formation of stimuli-responsive,fluorescent and magnetic nanoparticles based on cellulose stearoyl ester via nanoprecipitation

In comparison to stimuli-responsive, multi-functional nanoparticles (NPs) from synthetic polymers, such NPs based on sustainable, naturally occurring polysaccharides are still scarce. In the present study, stable stimuli-responsive, fluorescent and magnetic NPs were fabricated using cellulose stearoyl esters (CSEs) consisting of cellulose and stearoyl groups. The multifunctional NPs with the average diameters between 80 and 250 nm were obtained after facile nanoprecipitation using CSE solutions containing Fe₃O₄-NPs. Using the aqueous solution of fluorescent rhodamine B as precipitant, NPs with rhodamine B on NP surface were obtained. Rhodamine B could be released depending on the temperature. In comparison, stearoylaminoethyl rhodamine B can be encapsulated in CSE-NPs, which renders obtained NPs reversible fluorescence in response to UV illumination and heat treatment.     

Gel-assisted synthesis of anatase TiO2 nanoparticles and application for electrochemical determination of L-tryptophan

Anatase titanium dioxide nanoparticles (TiO₂-NPs) were synthesized with and without gelatin via the sol-gel method. The TiO₂-NPs were characterized by a number of techniques, such as thermogravimetric analysis (TGA), X-ray diffraction analysis (XRD), transmission electron microscopy (TEM), fourier transform infrared spectroscopy (FT-IR) and ultraviolet visible spectroscopy (UV-Vis). The particle sizes of the TiO₂-NPs prepared with and without gelatin were ～13 and ～17 nm, respectively. The main advantage of using gelatin as a stabilizing agent is that it provides long-term stability for nanoparticles by preventing particles agglomeration. The results indicated that gelatin was a reliable green stabilizer, which can be used as a polymerization agent in the sol-gel method for synthesis of tiny size TiO₂-NPs. Moreover, the composite film was prepared by synthesized TiO₂-NPs nanoparticles and multi wall carbon nanotube (MWNT) on glassy carbon electrode (TiO₂-MWNT/GCE). The TiO₂-MWNT/GCE responded linearly to L-tryptophan (L-Trp) in the concentration of 1.0 × 10^?6 to 1.5 × 10^?4 M with detection limit of 5.2 × 10^?7 M at 3 using amperometry. The studied sensor exhibited good reproducibility and long-term stability.     

Extraction of Ag(I), Cd(II), In(III), Sn(II), Sn(IV), Sb(III), and U(VI) from aqueous solutions by ketone solutions using single-step batch and continuous SISAK methods1,2

The extraction properties of Ag(I), Cd(II), In(III), Sn(II), Sn(IV), Sb(III), and U(VI) from aqueous KI/H₂SO₄ solution into a mixture of 4-methyl-2-pentanone (methyl isobutyl ketone, MIBK) and cyclohexanone (CHO) were studied. Both single-step batch and SISAK² methods were used. The oxidation of Sn(II) to Sn(IV) by iodine and complexation of Sn(IV) by 2,3-dimercapto-propanol-1 (BAL) were also investigated. A method for rapid and continuous separation of indium from tin was developed for investigation of short-lived indium fission products.     

Impact of PS/SiO2 morphologies on the SERS activity of PS/SiO2/Ag nanocomposite particles

To understand the relationship between the morphology of carboxyl-functionalized polystyrene/silica (PS/SiO₂) nanocomposite microspheres and the surface-enhanced Raman scattering (SERS) performance of PS/SiO₂/Ag nanocomposite particles, core-shell and raspberry-like PS/SiO₂ composite microspheres were used as templates to prepare PS/SiO₂/Ag nanocomposite particles. The core-shell and raspberry-like structured PS/SiO₂ templates were prepared via in situ sol-gel reaction by hydrolysis tetraethyl orthosilicate (TEOS) in alkali solution. Silver nanoparticles (10–50 nm) were loaded on the PS/SiO₂ templates’ surface by chemical reduction. The morphology and structure of the PS/SiO₂/Ag particles were characterized by TEM, SEM, X-ray diffraction (XRD), and ultraviolet-visible (UV-vis) spectroscopy. Rhodamine 6G (R6G) was selected as a model chemical to study the enhancement performance of substrate constructed by PS/SiO₂/Ag nanocomposite. Results indicated that the PS/SiO₂/Ag nanocomposite prepared based on the core-shell templates showed higher SERS activity. The beneficial effect was associated with a lower specific area of core-shell structure and the larger average diameter of nanosilvers than that of the raspberry-like templates.     

Spin-trapped Radicals: Determination by LC-TSP-MS and LC-ESI-MS

The 4-POBN[α-(4-pyridyl-l-oxide)-N-tert-butyl-nitrone] radical adducts of ethyl and pentyl radicals were determined by a combination of high performance liquid chromatography (HPLC) combined with electron paramagnetic resonance (EPR) with HPLC-electrospray (ESI)-mass spectrometry and HPLC-thermospray (TSP)-MS. The identifIcation of the peak corresponding to the spin-trapped radical was done by performing HPLC-EPR under the same chromatographic conditions as the HPLC-MS. The radical adducts could be determined by both techniques, even though for ESI only 12 μL/min of the total 1 mL/min HPLC flow rate could be directed into the ion source.     

TiO2 and TiO2/SiO2 nanoparticles obtained by sol–gel method and applied on dye sensitized solar cells

In this work we show the synthesis and characterization of TiO₂ and TiO₂/SiO₂ nanoparticles synthesized by sol–gel method using HF and HCl as catalysts. The obtained nanoparticles were analyzed by N₂ adsorption–desorption isotherms, transmission electronic microscopy, Ultraviolet–visible spectroscopy and X-ray diffractometry. Mesoporous, homogeneously polycondensed TiO₂/SiO₂ materials, containing nanocrystalline anatase phase with band gap similar to pure titania were obtained. Films of the powdered oxides were applied to assemble dye sensitized solar cells that presented electrical parameters, Fill Factor and efficiencies similar to devices obtained by only TiO₂. The sol–gel route arises as an alternative way to prepare TiO₂/SiO₂ materials for solar cells.     

Heat of reaction and curing of epoxy resin

The heat of reaction and kinetics of curing of diglycidyl ether of bisphenol-A (DGEBA) type of epoxy resin with catalytic amounts of ethylmethylimidazole (EMI) have been studied by differential power-compensated calorimetry as a part of the program for the study of process monitoring for composite materials. The results were compared with those from 1∶1 and 1∶2 molar mixtures of DGEBA and EMI. A method of determination of heat of reaction from dynamic thermoanalytical instruments was given according to basic thermodynamic principles. The complicated mechanism, possibly involving initial ionic formation, has also been observed in other measurements, such as by time-domain dielectric spectroscopy. The behavior of commercially available DGEBA resin versus purified monomeric DGEBA were compared. The melting point of purified monomeric DGEBA crystals is 41.4 °C with a heat of fusion of 81 J/g. The melt of DGEBA is difficult to crystallize upon cooling. The glass transition of purified DGEBA monomer occurs around ?22 °C with aΔC _p of 0.60 J/K/g.     

Structural and thermal properties of HDPE/n-AlN polymer nanocomposites

High-density polyethylene (HDPE) containing various volume fractions (0–20 vol%) of aluminum nitride nanoparticles (n-AlN) is prepared by melt mixing. Structural and morphological characterizations of the prepared composites are carried out by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), and atomic force microscopy (AFM). Thermal stability and degradation kinetics of HDPE/AlN (nano) composites are investigated by Thermogravimetric analysis (TG). HR-TEM micrographs confirm fairly uniform dispersion of AlN nanoparticles, as well as the existence of long interconnected chain-like aggregates. AFM images also confirm homogeneous dispersion of n-AlN in the polymer matrix. Roughness analysis from the AFM data indicates the presence of substantial undulation from the mean surface level. Thermogravimetric data indicate small improvement in the thermal stability of the composites. Kinetic parameters, viz., the activation energy (E _a), frequency factor (A), and reaction order (n) are estimated using the isoconversional methods of Kissinger, Flynn–Wall–Ozawa (FWO), KAS, and Friedman. Activation energies (E _a) calculated by the above four models display nearly similar features and are enhanced by the presence of AlN nanoparticles. Kinetics of degradation of HDPE-AlN (nano) composites follows a first-order reaction.     

Kinetics and possible mechanism of hydrogen chloride oxidation over supported copper-containing salt catalysts: I. Kinetics of HCl oxidation in the deacon and methane oxychlorination reactions over a copper-potassium salt catalyst

The kinetics of HCl oxidation at 350–425°C over a (CuCl₂-KCl)/support catalyst in two complementary processes—Deacon and methane oxychlorination reactions—has been investigated using a gradientless technique. This has allowed the range of \(P_{Cl_2 }\) in the reaction mixture to be markedly extended. New kinetic features of HCl oxidation under conditions such that this process does and does not depend on P _HCl have been discovered. The kinetic equations obtained in this study fit experimental data in a wider range of conditions than the equations proposed earlier. The results of this study suggest the existence of two HCl oxidation pathways in the Deacon reaction.     

Miscibility and crystallization behaviors of stereocomplex-type poly(l- and d-lactide)/poly(methyl methacrylate) blends

Stereocomplex-poly(l- and d-lactide) (sc-PLA) and poly(methyl methacrylate) (PMMA) blends were prepared by solution blending at PMMA loadings from 20 to 80 mass%. The miscibility and crystallization behaviors of the blends have been studied in detail by differential scanning calorimeter. The single-glass transition temperatures (T _g) of the blends demonstrated that the obtained system was miscible in the amorphous state. It was observed that the crystallization peak temperature of sc-PLA/PMMA blends was marginally lower than that of neat sc-PLA at various cooling rates, indicating the dilution effect of PMMA on the sc-PLA component to restrain the overall crystallization process. In the study of isothermal crystallization kinetics, the reciprocal value of crystallization peak time ( \( t_{\text{p}}^{ - 1} \) ) decreased with increasing PMMA content, indicating that the addition of non-crystalline PMMA inhibited the isothermal crystallization of sc-PLA at an identical crystallization temperature (T _c). Moreover, the negative value of Flory–Huggins interaction parameter (χ ₁₂ = ?0.16) of the blend further indicated that sc-PLA and PMMA formed miscible blends.     

Weak acid–base interaction induced assembly for the formation of rambutan-like poly(styrene-alt-maleic anhydride)/silica composite microspheres

To investigate the effect of surface functionality on the morphology of polymer/silica composite, poly(styrene-alt-maleic anhydride) (SMA) spheres prepared via precipitation polymerization method was employed. In water/ethanol solution, diethanolamine (DEA) was used to catalyze the hydrolysis reaction of tetraethoxysilane (TEOS), and rambutan-like poly(styrene-alt-maleic anhydride)/silica (SMA/SiO₂) microspheres were synthesized through in situ sol–gel process. The obtained structure and morphology were characterized by FTIR, NMR, TEM, SEM, and TGA. The results showed that the hydrolyzed SMA chains on the surface was crucial to the nucleation and growth of silica, and the morphologies of SMA/SiO₂ composite microspheres can be controlled by the amount of DEA and the ratio of SMA/TEOS. In addition, the SMA/SiO₂ microspheres were used to prepare hierarchical structure of SMA/SiO₂/Ag particles, which were utilized for the construction of surface-enhanced Raman scattering substrate (SERS).     

A wide range optical pH sensor for living cells using Au@Ag nanoparticles functionalized carbon nanotubes based on SERS signals

p-Aminothiophenol (pATP) functionalized multi-walled carbon nanotubes (MWCNTs) have been demonstrated as an efficient pH sensor for living cells. The proposed sensor employs gold/silver core-shell nanoparticles (Au@Ag NPs) functionalized MWCNTs hybrid structure as the surface-enhanced Raman scattering (SERS) substrate and pATP molecules as the SERS reporters, which possess a pH-dependent SERS performance. By using MWCNTs as the substrate to be in a state of aggregation, the pH sensing range could be extended to pH 3.0～14.0, which is much wider than that using unaggregated Au@Ag NPs without MWCNTs. Furthermore, the pH-sensitive performance was well retained in living cells with a low cytotoxicity. The developed SERS-active MWCNTs-based nanocomposite is expected to be an efficient intracellular pH sensor for bio-applications.