A comparative study on the ionic liquid [bmim][BF4] and its solution with transient absorption spectroscopy

A detailed study was explored to compare the transient absorption spectra of the neat 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]) with its solution in water or acetonitrile. It was concluded that the excited triplet state ³[bmim]^+* was produced after 266 nm laser irradiation, and then the neutral radical [bmim] and the cation radical [bmim] ²⁺ were formed through two possible paths. The transient absorption spectra of the neat [bmim][BF₄] and its solution were similar but the reaction kinetics were different due to their different local structures such as dimeric or cluster. The energy transfer between excited [bmim][BF₄] and β-carotene further affirmed the existence of ³[bmim]^+*. And the reaction that the hydrated electron captured by [bmim]⁺ to produce [bmim] in solution was observed.     

Solvent Effect on the Enthalpy of Solution and Partial Molar Volume of the Ionic Liquid 1-Butyl-3-methylimidazolium Tetrafluoroborate

Enthalpies of solution and partial molar volumes of the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate were determined in 15 solvents of different polarity. Very large differences of the enthalpies of solution (????_sol H _IL=38.9?kJ?mol^?1) and partial molar volumes (??V _IL=43 cm³?mol^?1) are nearly the same as observed for lithium perchlorate solutions. These results clearly indicate that the low values of the macroscopic polarity parameters of [bmim]BF₄ do not correspond with the large differences of the intermolecular interactions in IL solutions. The values of the partial molar volume of the cation, $V_{[\mathrm{bmim}]^{+}}$ , were estimated for the first time. The changes of the partial molar volumes, V _IL, reflect mainly the changes of anion volume, $V_{\mathrm{BF}_{4}^{-}}$ . The rate of the Diels?CAlder reaction of 9,10-dimethylanthracene with maleic anhydride in the [bmim]BF₄ medium was nearly the same as in common molecular solvents.     

Ionothermal Synthesis of a NaCl‐type Topological Network Based on Trinuclear Cobalt(II) Clusters as Nodes

A new metal‐organic network [Co₃(tbip)₃(H₂O)₄] · 2H₂O ( 1 ) (H₂tbip = 5‐tert‐butyl‐isophthalic acid) was synthesized through the ionothermal reaction of H₂tbip, cobalt nitrate, and [bmim]Br ionic liquid ([bmim]Br = 1‐butyl‐3‐methylimidazolium bromide). It exhibits a three‐dimensional (3D) framework with NaCl topology based on trinuclear cobalt(II) clusters as nodes. The magnetic studies show that there exist antiferromagnetic interactions between the Co^II ions.     

Unusual layer structure in an ion-paired compound containing tetra(isothiocyanate) cobalt(II) dianion and 4-nitrobenzylpyridinium: Crystal structure and magnetic properties

A new ion-paired compound [4NO₂BzPy]₂[Co(NCS)₄] (1) ([4NO₂BzPy]⁺ = 1-(4′-nitrobenzyl)pyridinium, NCS^? = isothiocyanate) is synthesized and characterized by elemental analysis, IR and UV-Vis spectra, ESI-MS and single crystal X-ray diffraction. Compound 1 is orthorhombic, space group Pbcn, with a = 13.188(2) Å, b = 8.458(1) Å, c = 29.281(4) Å, V = 3266.2(7) ų, D _calc = 1.468 g/cm³, Z = 4, F(000) = 1476, R ₁ = 0.0332. The [Co(NCS)₄]_2? anions form an unusual layer structure by S…N and S…Co interactions, while the [4NO₂BzPy]⁺ cations stack into a 1D column by the p…π stacking interaction in the solid state of 1. A magnetic measurement in the range 2–300 K shows a weak antiferromagnetic exchange with θ = ?2.42 K in 1.     

Polymerization of phenylacetylene catalysed by RhTp(cod) and RhBp(cod) in ionic liquids: effect of alcohols and of tetraammonium halides

RhTp(cod) ( 1 ) and RhBp(cod) ( 2 ), almost inactive in CH₂Cl₂, became good catalysts of phenylacetylene polymerization in ionic liquids ([bmim]Cl, [bmim]BF₄: bmim = 1‐butyl‐3‐methylimidazolium, [mokt]BF₄: mokt = 1‐methyl‐3‐oktylimidazolium, [bumepy]BF₄: 1‐butyl‐4‐methylpyridinium) and in CH₂Cl₂ in the presence of tetraammonium halides ([R₄N]X, R = Bu, Et; X = Cl, Br). The highest yields of polyphenylacetylene with catalyst 1 were obtained in [bmim]Cl at 65°C (64% after 2 h) and in [mokt]BF₄ at 20°C (56% after 24 h). In alcohols (CH₃OH, (CH₃)₂CHOH, (CH₃)₃COH) as solvents, up to 100% of the polymer was produced. When a mixture of an ionic liquid and CH₃OH was used as the reaction medium, the polymer yield was similar to the yield achieved in an ionic liquid only, but the molecular weight increased remarkably. Tetraammonium salts, [R₄N]X, are co‐catalysts for 1 , and the yield of the polymer increased in the order [Et₄N]Br < [Bu₄N]Br < [Et₄N]Cl < [Bu₄N]Cl. Polymers with molecular weights from 6900 to 38 800 Da were obtained with catalyst 2 in [R₄N]Br or [R₄N]Cl, whereas in ionic liquids ([bmim]Cl, [bmim]BF₄) the corresponding molecular weights were higher, from 51 300 to 60 300 Da. Copyright © 2004 John Wiley & Sons, Ltd.     

Pressure-Induced Solidification of 1-Butyl-3-methylimidazolium Tetrafluoroborate

We have used Raman spectroscopy to investigate the high-pressure phase behavior of 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]), a representative ionic liquid, at pressures up to ~7.5 GPa. We have also studied how increasing pressure leads to conformational changes in the [bmim]⁺ cation. We have found that liquid [bmim][BF₄] undergoes pressure-induced solidification (freezing) into a superpressed (metastable) state at 2.5 GPa; another structural change probably occurs at ~6 GPa. Remarkably, conformational changes in the [bmim]⁺ cation between trans and gauche conformers are concordant with the metastable structural changes of [bmim][BF₄]. As the pressure is increased from ambient, the fraction of gauche conformers increases, but the gauche fraction decreases above the solidification pressure (2.5 GPa), and slope of the gauche/trans ratio changes again above 6 GPa. We interpret these results in terms of the fragility of the ionic liquid.     

[Bmim]<Subscript>5</Subscript>[PNiW<Subscript>11</Subscript>O<Subscript>39</Subscript>]·3H<Subscript>2</Subscript>O an organic–inorganic hybrid as catalyst for one-pot pseudo-five-component synthesis of tetrazolyldiazepines

In this research, two heterogeneous organic–inorganic hybrid catalysts, [bmim]₃[PW₁₂O₄₀]·3H₂O and [bmim]₅[PNiW₁₁O₃₉]·3H₂O, have been prepared. The catalysts were fully characterized by several techniques such as elemental analyses, Fourier transform infrared spectroscopy, thermo-gravimetric analysis, scanning electron microscope and energy-dispersive X-ray analysis. Next, the hybrid catalysts have been used for the synthesis of functionalized diazepines containing tetrazole ring. Tetrazolyl-1H-spiro[benzo[b]cyclopenta[e][1,4] diazepines products were obtained in excellent yields and mild experimental conditions using [bmim]₅[PNiW₁₁O₃₉]·3H₂O as catalyst. This process was carried out via a one-pot, pseudo-five-component condensation reaction by means of a 1,2-diamine, isocyanide, TMSN3 and two molecules of a linear or cyclic ketone in methanol, at ambient temperature.     

Catalytic reaction of 1-chloropropenyl butyl ethers with methyl diazoacetate

Catalytic reaction of trans- and cis-1-chloropropenyl butyl ethers with methyl diazoacetate catalyzed by either Rh₂(OAc)₃, or Cu(OTf)₂, or Cu(acac)₂ in the presence of the imidazolium salts [bmim]⁺ Cl^?, [bmim]⁺ BF ₄ ^? , and [bmim]⁺ PF ₆ ^? was studied. The composition and ratio of products formed was shown to depend on the reaction conditions and the nature and ratio of the components of the catalytic system.     

Investigation on the Complexation of Dioxovanadium (V) with D-(-)-Quinic Acid in Water + 1-Butyl-3-Methylimidazolium Tetrafluoroborate and Water + Methanol Mixed Solvents Using the KAT Model

The complex formation reaction of the $ {\text{VO}}_{2}^{ + } $ VO 2 + cation with D-(-)-quinic acid {(1R,3R,4S,5R)-(-)-1,3,4,5-tetrahydroxycyclohexane-1-carboxylic acid} at T = 298 K, I = 0.1 mol·dm^?3 of sodium chloride in various aqueous solutions of 1-butyl-3-methylimidazolium tetrafluoroborate, [bmim]BF₄, and methanol were studied by using potentiometric and UV spectrophotometric techniques. As far as we know, the calculated stability constants data presented in the current work are the first reported values for [bmim]BF₄ and methanol mixed solvents. The Kamlet–Abboud–Taft solvatochromic equation enabled us to interpret the UV data and the stability constants values. The Redlich–Kister equation was applied for the calculation of solvatochromic parameters in the binary water + [bmim]BF₄ mixtures. Hydrogen bonding is important for the dissociation constant in both media. In these systems the solvent polarizability and hydrogen-bond donor ability are the main interactions for the stability constants in the aqueous ionic liquid and methanol solutions, respectively.     

Pyrolysis of cyclo-aromatic diesters

Studies on the pyrolysis of cyclo-aromatic diesters derivatives of 3-phenylprop-2-en-1-ol are presented. The diesters are obtained during catalyzed esterification process of a stoichiometric ratio of 3-phenylprop-2-en-1-ol with suitable cycloaliphatic or aromatic acid anhydride in the solvent-free medium. As an acid anhydrides cyclohexane-1,2-dicarboxylic anhydride, cis-4-cyclohexene-1,2-dicarboxylic anhydride, bicyclo[2.2.1]-5-heptene-2,3-dicarboxylic anhydride, and phthalic anhydride were applied. The thermal properties of obtained compounds under inert atmosphere were tested by means of differential scanning calorimetry and thermogravimetry coupled with FTIR analysis. The pyrolysis products were determined and the probable mechanism of their decomposition was proposed.     

Reactions of CH-acids with α,β-unsaturated aldehydes in ionic liquids

Metal carbonate-catalyzed reactions of CH-acids (diethyl malonate, ethyl acetoacetate, ethyl cyanoacetate, and ethyl 2-acetyl- and 2-ethoxycarbonyl-5,9-dimethyldeca-4,8-dienoates) with ,-unsaturated aldehydes (acrolein, crotonaldehyde, citral) were studied in an ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate [bmim][PF₆], and in a 1-butyl-3-methylimidazolium bromide ([bmim][Br]) — benzene system. The reactions with acrolein and crotonaldehyde afforded Michael addition products, those with citral resulted in Knoevenagel addition products. Sonication increased the yields of the Michael adducts. The ionic liquid [bmim][PF₆] can be recovered and repeatedly used in the reactions.     

[Bmim]BF4 ionic liquid: a novel reaction medium for the synthesis of β-amino alcohols

Epoxides undergo smooth ring-opening with aryl amines in 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim]BF₄) or 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim]PF₆) ionic liquids under mild and neutral conditions to afford the corresponding β-amino alcohols in excellent yields with high regioselectivity.     

Stereochemie planar-chiraler Verbindungen, 3. Mitt.

1.6-Methano[10]anulene-2-carboxylic acid (6) was resolvedvia its salts with (+)-and (?)-α-phenethylamine, resp. Two crystallisations from ethanol gave optically pure6 ([α] _D ²⁰ = 250°) as has been shown by application of theNMR-method to the mixture of the diastereomeric phenethylamides of6. Starting from (+)-6 several optically active methano[10]anulenes were prepared and theirCD-spectra recorded. Amongst these are the 2-acetyl, formyl and methyl derivatives and theendo-carbinol14a accessible from the acetyl compoundvia the cyclic ketone13. The absolute configurations of all compounds were established as being (S)_p by kinetic resolutions both of the anhydride of6 with (?)-phenethylamine and of14 a with (+)-α-phenylbutyric anhydride. The applicability ofHoreau's method to compounds of type14 was checked with (+)(R)phenyl-vinyl carbinol.     

Synthesis of a Triamidoamine Nd2Cl2(μ5-O)Li3 Cluster

[Li(THF)₄][[NN]₂Nd₂Cl₂(μ₅-O)Li₃] ( 2 ) ([NN]^3– = ([Me₃SiNCH₂CH₂)₃N]^3–) was prepared by transmetallation of Li₃[NN] with anhydrous neodymium trichloride in THF. After recrystallization from diethylether/pentane (1 : 2) light blue crystals of 2 were obtained, which were characterized by single crystal X-ray diffraction. Space group: P2₁/n, Z = 4, lattice dimensions at 203 K: a = 1260.8(3), b = 3832.5(8), c = 1569.2(3) pm, β = 106.07(3)°, R₁ = 0.0541. In the anion of 2 a nearly trigonal bipyramidal [Nd₂Li₃(μ₅-O)]⁷⁺ unit is observed.     

Cu-based atom transfer radical polymerization of methyl methacrylate using a novel tridentate ligand with mixed donor atoms

This study is aimed at atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) using a novel catalyst. The bis-(2-dodecylsulfanyl-ethyl)-amine (SNS) tridentate ligand with mixed donor atoms was synthesized in high purity using inexpensive reagents and was reacted with copper(I) bromide to produce the CuBr/SNS catalyst. The catalyst mediated living polymerization of MMA yielding polymers with controlled molecular masses and narrow molecular mass distributions (PDI < 1.25). Also, the kinetic plot exhibited a linear increase of ln([M]₀/[M]) versus time, indicating constant concentration of propagating radicals during the polymerization. The products were characterized by ¹H NMR, ¹³C NMR, FT-IR, UV-VIS, GC and elemental analyses (CHNS) and by GPC.     

[Bmim]PF6 and BF4 ionic liquids as novel and recyclable reaction media for aromatic amination

Activated aryl halides undergo smooth nucleophilic substitution reactions with secondary amines in 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim]PF₆) or 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim]BF₄) ionic liquids (ILs) at room temperature to afford the corresponding arylamines in excellent yields under mild and neutral conditions.     

Effect of ionic liquid on polyaniline chemically synthesised under falling-pH conditions

This study investigates the effect of the ionic liquid 1-butyl-3-methyl imidazolium chloride ([bmim]Cl) on the morphological, structural, and electronic properties of polyaniline (PANI) products synthesised by the falling-pH method. Products were characterised by SEM, FT-IR, UVVIS, N₂-physisorption, and conductivity measurements. The [bmim]Cl addition strongly influenced the PANI morphology, specific surface area, porosity, and conductivity. Depending on the [bmim]Cl: ANI ratio and the synthesis pH, a wide range of PANI nanostructures could be prepared, with rod-like, and fibre-like elongated structures being the dominant morphology under most experimental conditions. Samples prepared in the presence of [bmim]Cl exhibit specific areas of ca 22–35 m² g^?1. The conductivity of the final products depends on the [bmim]Cl: ANI ratio. Temperature dependence of conductivity in the temperature range from 77 K to 300 K was also studied.     

Penning ionization electron spectrometry of hydrogen chloride

An electron spectrometric study has been performed on HCl using metastable helium and neon atoms as well as neon resonance photons. High resolution electron spectra were obtained with two different beam apparatuses for a mixed He(2¹ S, 2³ S) beam, a pure He(2³ S) beam, and, for the first time, state-selected pure Ne(3s ³ P ₂) and pure Ne(3s ³ P ₀) beams, and for NeI resonance photons. For the system He(2³ S)+HCl the vibrational populationsP(υ′) of the formed HCl⁺ (X ²∏ _i , υ′) and HCl⁺ (A ²Ω⁺, υ′) ions are found to differ from the Franck-Condon factors for unperturbed potentials, indicating slight bond stretching in HCl upon He(2³ S) approach. For He(2¹ S)+HCl the vibrational peak shapes and vibrational populations are substantially different from the He(2³ S) case, pointing to an additional, charge exchanged interaction (He⁺+HCl^?) in the entrance channel of the former system. For the first time, we have detected the electrons in both the He(2¹ S)+HCl and He(2³ S)+HCl spectra associated with the major mechanism for the formation of Cl⁺ ions: energy transfer to repulsive HCl** Rydberg states, dissociating toH(1s) and autoionizing Cl**(¹ D ₂ nl) atoms. For both Ne(³ P ₂)+HCl and Ne(³ P ₀)+HCl, the populationsP(υ′) of both final molecular states HCl⁺ (X, A) agree closely with the Franck-Condon factors at the average relative collision energyē _coll=55 meV and, for HCl⁺ (A ²Ω⁺), also atē _coll=130 meV.