Synthesis of Some New 2‐Oxo‐N‐[(10H‐phenothiazin‐10‐yl)alkyl] Derivatives of Azetidine‐1‐carboxamides

The synthesis of a new series of 4‐aryl‐3‐chloro‐2‐oxo‐N‐[3‐(10H‐phenothiazin‐10‐yl)propyl]azetidine‐1‐carboxamides, 4a – 4m , is described. Phenothiazine on reaction with Cl(CH₂)₃Br at room temperature gave 10‐(3‐chloropropyl)‐10H‐phenothiazine ( 1 ), and the latter reacted with urea to yield 1‐[3‐(10H‐phenothiazin‐10‐yl)propyl]urea ( 2 ). Further reaction of 2 with several substituted aromatic aldehydes led to N‐(arylmethylidene)‐N′‐[3‐(phenothiazin‐10‐yl)propyl]ureas 3a – 3m , which, on treatment with ClCH₂COCl in the presence of Et₃N, furnished the desired racemic trans‐2‐oxoazetidin‐1‐carboxamide derivatives 4a – 4m . The structures of all new compounds were confirmed by IR, and ¹H‐ and ¹³C‐NMR spectroscopy, FAB mass spectrometry, and chemical methods.     

Antibacterial poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) fibrous membranes containing quaternary ammonium salts

In this study, antimicrobial membranes based on biodegradable material poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) [P(3HB‐4HB)] and quaternary ammonium salts (QASs) by two methods have been performed. Three QASs with varied alkyl chain lengths have been synthesized successfully and characterized by ¹H nuclear magnetic resonance and Fourier transform infrared. The synthesized QASs were blended with P(3HB‐4HB) and electrospun into composite fibrous membranes or casted into conventional membranes. Electrospun fibrous membranes with large surface areas are a superior type of antimicrobial biomaterials, and they exhibit preferable properties than solution casting membranes. Specifically, electrospun fibrous membranes are tougher and can inactivate both Gram‐positive Staphylococcus aureus and Gram‐negative Escherichia coli O157:H7 in a contact time of 30 min, whereas the solution casting membranes cannot. The length of alkyl chain in the quaternary ammonium groups on the modified P(3HB‐4HB) membranes is able to influence the antimicrobial activity. This type of antimicrobial material may have potential applications in biomaterial field. Copyright © 2016 John Wiley & Sons, Ltd.     

Facile Synthesis of Substituted Ethyl 2‐(Chloromethyl)‐2‐hydroxy‐2H‐1‐benzopyran‐3‐carboxylates

Ethyl 2‐(chloromethyl)‐2‐hydroxy‐2H‐chromene‐3‐carboxylates 2a – 2j have been synthesized by reaction of substituted salicylaldehydes with ethyl 4‐chloro‐3‐oxobutanoate, in the presence of piperidine in CH₂Cl₂ at room temperature, in good yields.     

One‐Pot Synthesis of 1,4‐Oxathiino[2,3‐b]quinoxalines or ‐pyrazines from 2,3‐Dichloroquinoxaline or ‐pyrazine and 1‐Aryl‐2‐bromoalkan‐1‐ones

An efficient one‐pot synthesis of novel heterocyclic derivatives, 2‐aryl‐1,4‐oxathiino[2,3‐b]quinoxalines or ‐pyrazines 5 , via the reaction of 2,3‐dichloroquinoxaline or ‐pyrazine with Na₂S?9 H₂O, and subsequent treatment of the resulting 2‐chloro‐3‐sodiosulfanylquinoxaline or ‐pyrazine 2 with 1‐aryl‐2‐bromo‐1‐alkanones and then NaH under mild conditions is described.     

Facile green one‐pot synthesis of novel thiazolo[3,2‐a]pyrimidine derivatives using Fe3O4@l‐arginine and their biological investigation as potent antimicrobial agents

Thiazolopyrimidine derivatives are well known because of their excellent therapeutic properties. In this investigation, an effective one‐pot three‐component method is described for the synthesis of novel 2‐[(Z )‐1‐(substituted phenyl)methylidine]‐7‐methyl‐3‐oxo‐5‐(substituted phenyl)‐2,3‐dihydro‐5H ‐thiazolo[3,2‐a]pyrimidine‐6‐carboxilic acid tert ‐butyl ester derivatives by condensation reaction of 3,4‐dihydropyrimidine‐2(1H )‐thiones, various aromatic aldehydes and chloroacetyl chloride under reflux conditions in the presence of Fe₃O₄@l ‐arginine nanoparticles as a magnetically reusable and eco‐friendly catalyst with short reaction times and moderate yields. The chemical structures of all synthesized compounds were determined using infrared, ¹H NMR and ¹³C NMR spectroscopies. In vitro antimicrobial activities of 3,4‐dihydropyrimidine‐2(1H )‐thiones and newly fused thiazolo[3,2‐a]pyrimidine derivatives were examined using the well diffusion method against diverse pathogenic strains, namely Staphylococcus aureus ATCC 6538, S. epidermidis ATCC 12228, Escherichia coli ATCC 8739 and Pseudomonas aeruginosa ATCC 9027 (bacteria), Candida albicans ATCC 10231 (yeast) and Aspergillus niger ATCC 16404 (fungus). The compounds having 2‐hydroxy, 4‐hydroxy, 2‐chloro and 4‐chloro groups attached to the phenyl ring on the pyrimidine and 4‐CH₃, 4‐OCH₃ and 3‐NO₂ groups attached to benzylidine on the thiazolo moiety showed significant antibacterial activity.     

Synthesis and Crystal Structures of Two 9‐(2‐Bromoethyl)‐Substituted 7‐Deazapurines

The 7‐(2‐bromoethyl) derivatives, 2a and 2b , of 4‐chloro‐7H‐pyrrolo[2,3‐d]pyrimidine ( 1a ) and 4‐chloro‐7H‐pyrrolo[2,3‐d]pyrimidin‐2‐amine ( 1b ) were synthesized by nucleobase anion alkylation (NaH, DMF) and crystallized. X‐Ray analyses of both compounds were performed, and they revealed significantly different positioning of the side chain relative to the heterocyclic ring, depending on the substituent (H or NH₂) at C(2).     

Synthesis and in vitro Antibacterial Activities of 5‐(2,3,4,5‐Tetrahydro‐1H‐chromeno[2,3‐d]pyrimidin‐5‐yl)pyrimidione Derivatives

A series of novel 5‐(2,3,4,5‐tetrahydro‐1H‐chromeno[2,3‐d]pyrimidin‐5‐yl)pyrimidione derivatives have been synthesized from substituted salicylaldehydes and barbituric acid or 2‐thiobarbituric acid in water catalyzed by phase transfer catalysis of triethylbenzyl ammonium chloride (TEBA). Elemental analysis, IR, ¹H NMR, and ¹³C NMR elucidated the structures of all the newly synthesized compounds. In vitro antimicrobial activities of synthesized compounds have been investigated against Escherichia coli, Bacillus subtilis, Staphylococcus aureus, and Pseudomonas aeruginosa. These newly synthesized derivatives exhibited significant in vitro antibacterial activity.     

The effect of substitution on the intramolecular hydrogen bonding in 3‐hydroxy‐propenethial

The intramolecular hydrogen bond strength of 3‐hydroxy‐propenethial (HPT) as well as the fluoro, chloro, bromo, and methyl derivatives were investigated at the B3LYP/6‐311++G^** level of theory. Solvent‐based calculations (in water) for HPT and derivatives were also carried out. The nature of the intramolecular hydrogen bond existing within the molecular under investigation has been studied by means of the Bader theory of atoms in molecules (AIM) that is based upon the use topological properties in terms of the electron density. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

Synthesis ofN1‐3‐{(4‐Substituted aryl‐3‐chloro‐2‐oxo‐azetidine)‐iminocarbamyl}‐propyl‐6‐nitroindazole Derivatives and Their Biological Significance

Synthesis ofN¹‐3‐{(4‐substitute daryl‐3‐chloro‐2‐oxo‐azetidine)‐iminocarbamyl}‐propyl‐6‐nitroindazole 4a – 4s was conducted by a conventional method. All the compounds were synthesized and characterized by IR, ¹H NMR, ¹³C NMR, FAB‐Mass techniques and chemical methods. All the final synthesized compounds were evaluated for their antimicrobial activity and antitubercular activity with MIC values against some selected microorganisms.     

A Novel Diastereoselective Synthesis of 6‐Aryl‐5‐hydroxy‐2,3‐dihydropyrano[2,3‐c]pyrazol‐4(1H)‐ones

A novel one‐pot diastereoselective synthesis of trans‐6‐aryl‐5‐hydroxy‐2,3‐dihydro[2,3‐c]pyrazol‐4(1H)‐ones 3a , 3b , 3c , 3d , 3e , 3f , 3g , 3h is described via the Darzens condensation reaction of 2‐chloro‐1‐(5‐hydroxy‐3‐methyl‐1‐phenyl‐1H‐pyrazol‐4‐yl)ethanone ( 2 ) with different aromatic aldehydes in aqueous basic medium. The structures of the compounds prepared were determined by analytical and spectral analyses.     

Efficient One‐Pot Access to 2,9‐Dihydrothiopyrano[2,3‐b]indole Scaffolds Showing Large Stokes Shifts

A simple, mild and efficient one‐pot approach for the construction of 2‐aryl‐3‐nitro‐2,9‐dihydrothiopyrano[2,3‐b]indole derivatives has been realized in CH₂Cl₂ medium at ambient temperature via three‐component tandem reaction of N‐protected‐2‐chloro‐3‐formylindoles, sodium hydrosulfide and β‐substituted nitroolefins/δ‐substituted nitrodienes using DABCO (10 mol%) as an organocatalyst, followed by dehydration in the presence of activated molecular sieves (4 Å). The significant advantages of this protocol are simple operation, shorter reaction time, high atom economy, good to high yields (73% –89%) and wider substrate scope. In addition, all the synthesized compounds have shown the large positive Stokes shift values (5632–6081 cm^?1).     

Synthesis of novel 1,3‐substituted 1H‐[1,2,4]‐triazole‐3‐thiol derivatives

By means of regioselective S‐alkylation of 1H‐1,2,4‐triazole‐3‐thiol ( 1 ), a series of S‐substituted derivatives 2a‐j were synthesized. In certain conditions, the reaction of 2 with arylsulfochlorides, arylisocyanates, and quaternary ammonium salts of azines corresponding compounds were obtained 1‐arylsulfonyl‐ (3a‐d) , 1‐arylcarbonamido‐ ( 4a,b ), and 1‐azinyl‐1,2,4‐ ( 6a‐p ) triazoles. Structures of compounds were confirmed by ¹H NMR and elemental analyses. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 20:405–410, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20565     

Regioselectivity of the reactions of 4,5‐diphenylimidazole‐2‐thione with 1‐chloro‐2,3‐epoxy‐propane and 1‐bromo‐propene,efficient precursors for imidazo[2,1‐b]thiazine and thiazole. Effect of microwave and solid support

A solid support under microwave (MW) irradiation without solvent allowed the synthesis of the 2,3‐epoxy‐propyl‐thioimidazole 4 , regioselectively, and prohibited its cyclization to give the imidazo[2,1‐b]thiazine 3 from the reaction of 4,5‐diphenylimidazole‐2‐thione ( 1 ) with 1‐chloro‐2,3‐epoxy‐propane ( 2 ). The formation of the latter required basic conditions whereby it became the sole product; the change of the basic catalyst changed the ratio of the two products under both conventional and microwave (MW) conditions. A regioselective allylation of 1 with allyl bromide in presence of triethylamine gave the S‐allyl 8 , while in presence of potassium carbonate led to the S,N‐bis(allylated) derivative 9 . The intramolecular ring closure of 8 in presence of sulfuric acid afforded the imidazothiazole 16 . Protection of the sulfur in 1 and subsequent reaction with allyl bromide gave the N‐allylated derivative and with 2 gave N‐3‐chloro‐prop‐1‐yl derivative that shed light on the preferred route for the formation of 3 and 4 . The reactivity encountered during the alkylation of 1 with 2 has been theoretically investigated by using the AM1 method.     

Synthesis of a Novel Series of 2,3‐Disubstituted Quinazolin‐4(3H)‐ones as a Product of a Nucleophilic Attack at C(2) of the Corresponding 4H‐3,1‐Benzoxazin‐4‐one

A new series of 2,3‐disubstituted quinazolin‐4(3H)‐one derivatives was synthesized by nucleophilic attack at C(2) of the corresponding key starting material 2‐propyl‐4H‐3,1‐benzoxazin‐4‐one (Scheme 2). The reaction proceeded via amidinium salt formation (Scheme 3) rather than via an N‐acylanthranilimide. The structure of the prepared compounds were elucidated by physical and spectral data like FT‐IR, ¹H‐NMR, and mass spectroscopy.     

Quinine‐modified polymer monolithic column with reversed‐phase /strong anion‐exchange mixed‐mode for pressurized capillary electrochromatography

Via the facile ring‐opening reaction of epoxy groups with quinine, a novel polymer monolith with quaternary ammonium for reversed‐phase/strong anion‐exchange mixed‐mode has been fabricated for pressurized capillary electrochromatography (pCEC). Optimization on the preparation of quinine‐modified monoliths has been investigated, and characteristics including morphology, permeability, mechanical stability, reproducibility, and column performance have been also studied. Active quaternary ammonium groups were conveniently produced to generate cationic action sites and stable anodic electroosmotic flow. Multiple interactions including reversed‐phase, strong anion‐exchange, electrostatic repulsion and π–π stacking interactions were obtained. Satisfactory separation capability of various analytes such as alkylbenzenes, polycyclic aromatic hydrocarbons, benzoic acid and its homologs, and β₂‐receptor excitants has been achieved. Applied to the real sample, the good resolution of three alkaloids in Corydalis yanhusuo were achieved by pCEC with the quinine‐modified monolith. The results light a potential access to facilely fabricating quaternary ammonium‐functionalized polymer monolith with multiple interactions for efficient electrochromatography profiling of various compounds.     

Synthesis of 3,8‐Dichloro‐6‐ethyl‐1,2,5,7‐tetramethyl–BODIPY from an Asymmetric Dipyrroketone and Reactivity Studies at the 3,5,8‐Positions

The asymmetric BODIPY 1 a (BODIPY=4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene), containing two chloro substituents at the 3,8‐positions and a reactive 5‐methyl group, was synthesized from the asymmetric dipyrroketone 3 , which was readily obtained from available pyrrole 2 a . The reactivity of 3,8‐dichloro‐6‐ethyl‐1,2,5,7‐tetramethyl‐BODIPY 1 a was investigated by using four types of reactions. This versatile BODIPY undergoes regioselective Pd⁰‐catalyzed Stille coupling reactions and/or regioselective nucleophilic addition/elimination reactions, first at the 8‐chloro and then at the 3‐chloro group, using a variety of organostannanes and N‐, O‐, and S‐centered nucleophiles. On the other hand, the more reactive 5‐methyl group undergoes regioselective Knoevenagel condensation with an aryl aldehyde to produce a monostyryl‐BODIPY, and oxidation with 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (DDQ) gives the corresponding 5‐formyl‐BODIPY. Investigation of the reactivity of asymmetric BODIPY 1 a led to the preparation of a variety of functionalized BODIPYs with λ_max of absorption and emission in the ranges 487–587 and 521–617 nm, respectively. The longest absorbing/emitting compound was the monostyryl‐BODIPY 16 , and the largest Stokes shift (49 nm) and fluorescence quantum yield (0.94) were measured for 5‐thienyl‐8‐phenoxy‐BODIPY 15 . The structural properties (including 16 X‐ray structures) of the new series of BODIPYs were investigated.     

Supramolecular architectures of succinates of 1‐hydroxypropan‐2‐aminium derivatives

Aminoalkanol and aroxyalkyl derivatives are known as potential anticonvulsants. Two new salts, namely bis{(R,S)‐N‐[2‐(2,6‐dimethylphenoxy)ethyl]‐1‐hydroxypropan‐2‐aminium} succinate ( 1s ), C₁₃H₂₂NO₂⁺·0.5C₄H₄O₄²⁻, and bis{(S)‐(+)‐N‐[2‐(2,6‐dimethylphenoxy)ethyl]‐1‐hydroxypropan‐2‐aminium} succinate ( 2s ), C₁₃H₂₂NO₂⁺·0.5C₄H₄O₄²⁻, have been prepared and characterized by single‐crystal X‐ray diffraction. The N atoms are protonated by proton transfer from succinic acid. Salt 1s crystallizes in the space group P2₁/n with one cation and half an anion in the asymmetric unit across an inversion centre, while ( 2s ) crystallizes in the space group P2₁ with four cations and two anions in the asymmetric unit. The hydroxy group of the cation of 1s is observed in two R/S disorder positions. The crystals of these two salts display similar supramolecular architectures (i.e. two‐dimensional networks), built mainly by intermolecular N⁺—H…O^δ− and O—H…O^δ− hydrogen bonds, where `δ−' represents a partial charge. The succinate anions are engaged in hydrogen bonds, not only with protonated N atoms, but also with hydroxy groups.     

Facile Synthesis of Novel 3‐(4‐phenylisothiazol‐5‐yl)‐2H‐chromen‐2‐one Derivatives as Potential Anticancer Agents

A series of 3‐(4‐phenylisothiazol‐5‐yl)‐2H‐chromen‐2‐one ( 6a – l ) derivatives has been efficiently synthesized by straightforward sequential reactions. Tandem Vilsmeier Hack reaction/cyclization/bromination/Suzuki cross‐coupling reactions were successfully applied to the preparation of title compounds in good‐to‐high yields. In the synthetic sequences, 3‐chloro‐3‐(2‐oxo‐2H‐chromen‐3‐yl)acrylaldehydes ( 2 ) were found to react with ammonium thiocyanate to yield the corresponding 3‐(isothiazol‐5‐yl)‐2H‐chromen‐2‐ones ( 3 ). These derivatives were brominated with N‐bromo succinamide to yield the corresponding regioselective 3‐(4‐bromoisothiazol‐5‐yl)‐2H‐chromen‐2‐one ( 4 ). Finally, compound 4 was treated with various phenyl/pyrazole/7H –pyrrolo[2,3‐d]pyrimidinyl boronic acids 5a – l in the presence of K₂CO₃ and Pd catalyst in dimethylformamide to yield the corresponding title derivatives 6a – l . All the synthesized compounds were characterized by analytical and spectral studies. All the final compounds were screened against different cancer cell lines (A549, PC3, SKOV3, and B16F10), and among these compounds, 6b , 6g , 6h , and 6l displayed moderate cytotoxic activity against the tested cell lines.     

Three‐Step Synthesis of 3‐Aryl‐2‐sulfanylthieno[2,3‐b]‐, ‐[2,3‐c]‐, or ‐[3,2‐c]pyridines from the Corresponding Aryl(halopyridinyl)methanones

A convenient three‐step procedure for the synthesis of three types of 3‐aryl‐2‐sulfanylthienopyridines 4, 8 , and 12 has been developed. The first step of the synthesis of thieno[2,3‐b]pyridine derivatives 4 is the replacement of the halo with a (sulfanylmethyl)sulfanyl group in aryl(2‐halopyridin‐3‐yl)methanones 1 by successive treatment with Na₂S?9 H₂O and chloromethyl sulfides to give aryl{2‐[(sulfanylmethyl)sulfanyl]pyridin‐3‐yl}methanones 2 . In the second step, these were treated with LDA (LiNⁱPr₂) to give 3‐aryl‐2,3‐dihydro‐2‐sulfanylthieno[2,3‐b]pyridin‐3‐ols 3 , which were dehydrated in the last step with SOCl₂ in the presence of pyridine to give the desired products. Similarly, thieno[2,3‐c]pyridine and thieno[3,2‐c]pyridine derivatives, 8 and 12 , respectively, can be prepared from aryl(3‐chloropyridin‐4‐yl)methanones 5 and aryl(4‐chloropyridin‐3‐yl)methanones 9 , respectively.     

Synthesis and Heterocyclization of 1‐Aryl‐2‐methyl‐4‐oxo‐1,4,5,6‐tetrahydropyridine‐3‐carboxylates

A series of novel isoxazole, dihydropyrazolone, and tetrahydropyridine derivatives were synthesized by the reaction of corresponding ethyl 1‐substituted aryl‐2‐methyl‐4‐oxo‐1,4,5,6‐tetrahydropyridine‐3‐carboxylates with different hydrazines and hydroxylamine. Reaction of tetrahydropyridone with N ,N‐dimethylformamide dimethyl acetal provided 1‐(5‐chloro‐2‐methylphenyl)‐2‐[2‐(dimethylamino)ethenyl]‐4‐oxo‐1,4,5,6‐tetrahydropyridine‐3‐carboxylate, which was cyclized into a bicyclic compound on treatment with ammonium acetate. The structures of all synthesized compounds were confirmed by IR, ¹H NMR, and ¹³C NMR spectroscopy data. The structure of 5‐(5‐chloro‐2‐methylphenyl)‐4‐methyl‐2‐phenyl‐2,5,6,7‐tetrahydro‐3H‐pyrazolo[4,3‐c]pyridin‐3‐one was unambiguously assigned by means of X‐ray analysis data.