Photometrische Bestimmung von Zinn in zinnorganischen Verbindungen mit 3′-Pyridylfluoron

3′-Pyridylfluorone is used for the photometric determination of tin in organic tin compounds after decomposition with conc. sulphuric acid and hydrogen peroxide. The high accuracy of this method allows elemental analysis. With concentrations of 10–70% the absolute error was + 0.14 to ?0.06%.     

Determination of tin in poly(vinyl chloride) by atomic-absorption spectroscopy

A simple procedure is described for the determination of tin in PVC by atomic-absorption spectroscopy with an air-hydrogen flame, after wet digestion of the sample with sulphuric acid and hydrogen peroxide.     

Breakage of λ-DNA by inorganic tin and organotin compounds as environmental pollutants

In proportion to the environmental pollution problems caused by organotin compounds, the genotoxicities of tin compounds in the environments have become of interest so as to estimate their safety in recent years. In this work, isolated λ-DNA (double-strand DNA) was incubated with inorganic tin(II) and tin(IV) and five organotin compounds [n-butyltin trichloride, di(n-butyltin) dichloride, methyltin trichloride, dimethyltin dichloride and trimethyltin chloride] in reaction systems both with and without hydrogen peroxide (H₂O₂) content. The tin compounds tested in this study did not induce DNA breakage in the absence of hydrogen peroxide. Divalent inorganic tin (SnCl₂) and tetravalent inorganic tin (SnCl₄) caused DNA breakage in the presence of hydrogen peroxide (10 mM), and the DNA damage activity of inorganic tin was much more potent in divalent inorganic tin (SnCl₂) than in tetravalent inorganic tin (SnCl₄). Divalent inorganic tin (SnCl₂) induced DNA breakage in a concentration-dependent fashion at concentrations greater than 0.1 mM of SnCl₂ in the presence of hydrogen peroxide (10 mM). DNA breakage was not caused by n-butyltin compounds and methyltin compounds either in the presence or in the absence of hydrogen peroxide.     

Anion-exchange separation and spectrophotometric determination of vanadium in silicate rocks

A combined anion-exchange-spectrophotometric method has been developed for the determination of vanadium in silicate rocks. A rock sample weighing about 0.1 g is decomposed with a mixture of sulphuric and hydrofluoric acids and after removal of HF the residue is taken up with dilute sulphuric acid. This solution is adjusted to be 0.05M in sulphuric acid and contain 0.3% hydrogen peroxide, and is passed through a column of Amberlite CG 400 (sulphate form). The sorbed vanadium is eluted with 30 ml of 1M hydrochloric acid. The effluent is evaporated to dryness, made 0.1M in hydrochloric acid and 3% in hydrogen peroxide content, and passed through a column of Amberlite CG 400 (chloride form) to get rid of accompanying thorium and zirconium. Vanadium is stripped by elution with 20 ml of 1M hydrochloric acid and subsequently determined spectrophotometrically with 4-(2-pyridylazo)resorcinol. The detection limit is 0.4 ppm.     

Comparison of sulphur-mode and tin-mode flame photometric detectors for the gas chromatographic determination of organotin compounds

A comparison of sulphur-mode (393 nm) and tin-mode (610 nm) flame photometric detectors for the gas chromatographic determination of butyl- and phenyltin compounds is described. The chromatographic peaks of the butyl- and phenyltin compounds were well separated, and high sensitivity was achieved in both modes; however, the tin-mode was more specific for tin compounds than the sulphur-mode. The absolute detection limits with the sulphur-mode and the tin-mode were 3.9-7.6 pg and 2.6-5.1 pg as tin, respectively. The application of the tin-mode gas chromatographic method to the determination of organotin compounds in fish is presented. For this application, organotins are extracted (as chloride) with hydrochloric acid and n-hexane-benzene (3:2, containing 0.05% tropolone) and the extracts are pentylated by a Grignard reagent prior to gas chromatography. The absolute recoveries of butyl- and phenyltin compounds added to fish samples ranged from 68.5 to 84.4% (the coefficients of variation were less than 6.6% for all substances, n = 8). Significant amounts of three organotin compounds (di- and tributyltin and triphenyltin) in fish samples were detected by this method. This technique may have application for other organotin compounds and the monitoring of butyl- and phenyltin compounds in the environment.     

HPTLC analysis of organotin compounds in preservative solutions and preservative-treated wood

A high-performance thin-layer chromatographic (HPTLC) method is described for the determination of tributyltin compounds (bis(tri-n-butyltin) oxide, TBTO, and tri-n-butyltin naphthenate, TBTN) and their degradation products (dibutyltin and monobutyltin compounds). The organotin compounds are extracted from wood with ethanol containing 0.5% (v/v) of hydrochloric acid and the separation of the defferent kinds of organotin compounds is achieved by thin-layer chromatography. The sample spots are measured using a scanning densitometer after decomposing the organotin compounds to inorganic tin by ultraviolet irradiation and visualization of the spots with pyrocatechol violet. Applications of the method to detection and quantification of organotin compounds in preservative solutions, in recently impregnated wood, and in wood samples from five-year-old window frames are described.     

Ion-chromatographic determination of chloride and fluoride in electrolyte from the halogen tin-plating process

A simple and rapid procedure is proposed for the determination of chloride and free fluoride in tin electroplating fluid. Suppressor-column ion-chromatography is used after oxidation of hexafluorostannate(II) to hexafluorostannate(IV) with hydrogen peroxide. Concurrent determination of tin(II) and total tin then allows calculation of the concentrations of fluoride, hexafluorostannate(II) and hexafluorostannate(IV).     

Extraction-spectrophotometric determination of small amounts of boron in copper metal and copper-base alloys with methylene blue

A sensitive and rapid spectrophotometric method for the determination of small amounts of boron in copper metal and some copper alloys is described. The method is based on the extraction of a BF(4)(-)-Methylene Blue complex into dichloroethane after decomposition of the sample with hydrogen peroxide and sulphuric acid. The optimum reaction conditions and the influence of alloying elements have been investigated. Boron contents in the range 0.00-0.1% can be determined with a relative error ranging from about 9 to 2%.     

Simultaneous determination of butyltin and phenyltin compounds in oysters by capillary gas chromatography

A method is described for the simultaneous determination of butyl- and phenyltin compounds in oyster samples. The organotin compounds were extracted (as chlorides) from oyster homogenates with hydrochloric acid and benzene in the presence of 0.05% tropolone. These compounds were converted into pentyl derivatives with pentyl Grignard reagent and then analysed by capillary gas chromatography with a flame photometric detector equipped with a 393-nm filter. The recoveries of six organotin compounds added to oyster samples ranged from 71 to 74%. The detection limits of butyl- and phenyltin compounds were in the 5-9 pg range as tin. We detected significant amounts of three organotin compounds (di- and tributyltin and triphenyltin) in oyster samples.     

湿法消解-电感耦合等离子体原子发射光谱(ICP-AES)法测定含铑废催化剂冶金废水中铑

摘 要：建立了硫酸、过氧化氢湿法消解、ICP-AES测定铑派克洗水铑的含量的分析方法。确定了硫酸碳化有机物,过氧化氢溶解煮沸,氢氟酸除硅,于4mol/L盐酸体系,碲共沉淀富集铑,10%盐酸介质,电感耦合等离子体发射光谱仪测定铑量。在选定条件下,测定含铑有机物洗水中0.0003 g/L～0.010 g/L的铑,相对标准偏差（RSD,n=7）和加标回收率分别为：铑0.545%～2.91%和99.62%%～100.55%。。方法准确、快速、简便,测定结果与火试金富集分析方法结果吻合。     

Electron-capture gas chromatography of methadone after oxidation to benzophenone.

A procedure for the determination of low levels of methadone (6-dimethylamino-4,4-diphenylheptanone-3) in serum has been developed. Methadone is extracted from serum into n-heptane and re-extracted into an acidic aqueous phase. Methadone is oxidized to benzopheone with barium peroxide in sulphuric acid, during which procedure an n-heptane phase is present into which the oxidation product is continuously extracted. The benzophenone formed is determined by means of electron-capture gas chromatography. The recoveries are 100 +/- 3% and 100 +/- 4.5% at the 120 and 16 ng levels, respectively. The minimum amount that can be determined in 1 ml of serum is 4 ng. Interferences from possible metabolies are probably minor. The main cyclic metabolite is only co-determined to a minor extent if the oxidation time is optimized. Comparison of this oxidation method with a combined gas chromatographic-mass spectrometric determination with selected ion monitoring showed identical serum levels.     

Extractive separation and spectrophotometric determination of palladium and platinum with dithizone in the presence of stannous chloride

The conditions [acid used, presence of chloride and tin(II)] for the extractive separation and spectrophotometric determination of palladium and platinum as the dithizonates Pd(HDz)(2) and Pt(HDz)(2) have been examined. In the absence of stannous chloride platinum does not undergo extraction. Conditions for the separation and determination of these metals in the presence of mercury, gold and copper, which are also extracted with dithizone into carbon tetrachloride or chloroform under the conditions suitable for palladium (1M sulphuric acid/0.1M hydrochloric acid), have been defined. The mercury and gold dithizonates are formed quickly and can be removed before the palladium and platinum compounds have had time to form. They can be decomposed with iodide. Copper dithizonate is decomposed by reduction with tin(II). The proposed procedure has been applied to the determination of palladium in technical platinum metal.     

Spectrophotometric determination of tantalum in ores and mill products with brilliant green after separation by methyl isobutyl ketone extraction of tantalum fluoride

A method for determining ~ 0.001% or more of tantalum in ores and mill products is described. After fusion of the sample with sodium carbonate, the cooled melt is dissolved in dilute sulphuric-hydrofluoric acid mixture and tantalum is separated from niobium and other matrix elements by methyl isobutyl ketone extraction of its fluoride from 1M hydrofluoric acid-0.5M sulphuric acid. The extract is washed with a hydrofluoric-sulphuric acid solution of the same composition to remove co-extracted niobium, and tantalum is stripped with dilute hydrogen peroxide. This solution is acidified with sulphuric and hydrofluoric acids and evaporated to dryness, and the residue is dissolved in oxalic-hydrofluoric acid solution. Tantalum is ultimately determined spectrophotometrically after extraction of the blue hexafluorotantalate-Brilliant Green ion-association complex into benzene from a 0.05M sulphuric acid-0.5M hydrofluoric acid-0.2M oxalic acid medium. The apparent molar absorptivity of the complex is 1.19 x 10(4) l.mole(-1).mm(-1) at 640 nm, the wavelength of maximum absorption. Common ions, including iron, aluminium, manganese, zirconium, titanium, molybdenum, tungsten, vanadium, tin, arsenic and antimony, do not interfere. Results obtained by this method are compared with those obtained by an X-ray fluorescence method.     

Application of experimental design in a method for screening sediments for global determination of organic tin by electrothermal atomic absorption spectrometry (ETAAS)

An experimental design was developed to obtain a simple procedure for global determination of organic tin compounds in sediment. Sediment was extracted by a two-phase method and tin was determined in the organic extract by electrothermal atomic absorption spectrometry (ETAAS), with palladium as chemical modifier. A Plackett-Burman design for screening and a fractional central composite design (CCD) for optimizing were used for evaluation of the effects of several variables. The results showed that sediment mass, volume and concentration of extracting acid, pyrolysis and atomization temperatures, and modifier concentration affect the determination. Reference material PACS-2 was analyzed to evaluate the procedure. It was possible to extract 82% of the organotin content certified in the reference sediment. The limit of detection (LOD) was 0.08 microg g(-1) and the relative standard deviation was 4%. The method was applied to the analysis of estuarine superficial sediments from Gipuzkoa (Spain). The organotin content of these samples ranged from 0.7 to 7.7 microg g(-1), as tin, on a dry-weight basis.     

Polarographic microdetermination of sulphur in organic compounds after oxygen flask combustion

Summary Three polarographic micro-methods are described for the determination of sulphur in organic compounds after oxygen-flask combustion. The products are converted into sulphuric acid by oxidation with hydrogen peroxide, the excess of which is expelled through boiling. The methods are based upon allowing the sulphuric acid to react with an excess of barium iodate or bromate, then recording polarographically the cathodic reduction wave of the iodate or bromate ion. The bromate methods are superior to the iodate method being simpler and more rapid, and the results are correct to within ca. ±0.5%.

---

Zusammenfassung Drei polarographische Mikromethoden zur Bestimmung von Schwefel in organischen Verbindungen nach deren Verbrennung im Sauerstoffkolben wurden beschrieben. Die Verbrennungsprodukte werden durch Oxydation mit Wasserstoffperoxid in Schwefelsäure umgesetzt. Der Überschuß des Oxydationsmittels wird durch Kochen zerstört. Die Schwefelsäure läßt man mit überschüssigem Bariumjodat oder -bromat reagieren und mißt dann polarographisch die kathodische Reduktionswelle des Jodats oder Bromats. Die Bromatmethode ist der Jodatmethode überlegen, da sie einfacher und rascher zu Resultaten führt, die innerhalb ±0,5% korrekt sind.

     

GC FPD method for the simultaneous speciation of butyltin and phenyltin compounds in waters

A method is described for the simultaneous determination of nanogram amounts of mono-, di- and tri-butyltin compounds in water. The procedure is based on the conversion of tin compounds to volatile species by Grignard pentylation and analysis using GC with flame photometric detection (GC FPD). The ionic compounds are extracted from diluted acidified (HBr) aqueous solutions by using a pentane-tropolone solution. The extracted organotin compounds are pentylated by a Grignard reagent and purified on a Fluorisil column before analysis by GC FPD. The detection limits are 20 ng dm^?3 for butyltin compounds and 50 ng dm^?3 for phenyltin compounds. Recoveries from spiking experiments in tap-water and natural seawater matrices, in which no organotin compounds were detected, were greater than 90% for most of the alkyltin compounds.     

Photometric and Gas-Chromatographic Determination of Hydrogen Peroxide and Peroxybutanoic Acid in Oxidized Butanoic Acid

Procedures were developed for determining hydrogen peroxide and peroxy acids mixed with peroxide compounds of other classes in the oxidation products of butanoic acid with atmospheric oxygen and hydrogen peroxide. Conditions were found for the selective decomposition of hydrogen peroxide with catalase in the presence of an excess of the carboxylic acid deactivating the enzyme. The errors introduced by the acylation of hydrogen peroxide with the carboxylic acid in the course of sample treatment with the enzyme were eliminated by adding diphenyl sulfide or dimethyl sulfoxide, which selectively reduced the peroxy acids. The concentrations of hydrogen peroxide and the peroxy acid were found from the difference between the total concentration of the peroxide compounds before and after treating a sample with catalase and a sulfur-containing reagent by the photometric method using a reagent containing Fe²⁺ ions and N, N-dimethyl-p-phenylenediamine. Peroxy acids were determined by GLC from the yields of the oxidation products of diphenyl sulfide with the peroxy acid (diphenyl sulfoxide and diphenyl sulfones).     

On the determination of total dissolved tin in natural waters by direct hydride generation and non-dispersive atomic-fluorescence spectrometry

The analytical response of inorganic tin and of eleven organotin compounds of the type R(n)SnX(4-)(n) (with n = 1, 2, 3 and R = methyl, ethyl, butyl and phenyl) was compared for direct hydride generation with non-dispersive atomic fluorescence detection. Most of these compounds showed behaviour resembling that of inorganic tin, with the exception of tributyltin and the phenyltin compounds. A simple pretreatment with 10(-3)M bromine and 0.033M nitric acid at 70 degrees for 60 niin prevents any risk of underestimation and the total dissolved tin in natural waters can be determined with recoveries better than 90%, with inorganic tin as calibration standard.     

有机锡在不对称合成中的应用研究进展

金属有机化合物是不对称合成中常用的有机试剂。有机锡试剂易于制备，而且碳-锡键又易于断开，因此它们被广泛应用于有机合成中，当然也是不对称合成常用的试剂之一，是制备某些手性天然产物必备的试剂。由于锡的结构特点，它可以形成四配位、五配位甚至六配位的配合物，这些配合物作为路易斯酸可用作不对称合成中的催化剂、助催化剂。从已报道的文献看，大多数反应的产率及对映体选择性都在中等或中等以上水平，某些已达到了优良的水平。本文综述了有机锡作为反应试剂、催化剂、助催化剂在不对称合成中的应用。