Surface treatment and porosity control of porous silica microspheres

Summary Porous silica microspheres (PSM) have been treated with ammonium bifluoride to adjust porosity, pore size, remove surface impurities, and minimize surface acidity. The porosities of four silicas having mean pore diameters ranging from 150 to 750 ? have been altered from initial values to the point at which the mechanical strength is insufficient to allow packed columns with acceptable performance. It is shown that a linear relationship exists between a change in porosity and the relative amount of ammonium bifluoride used to treat the silica. This reagent removes silica homogeneously from all pores in a given microsphere in a controllable and predictable manner. This treatment increases the peak capacity and improves chromatographic performance. The surfaces of treated silicas were probed with thiamine in the ion-exchange chromatographic mode. The slopes and intercepts of plots in which retention is plotted against the reciprocal of buffer concentration were both significantly reduced indicating that surface acidity is minimized by this treatment.     

Elaboration of nanometric amorphous silica from quartz-based minerals using the fluorination method

A method of elaboration of nanometric amorphous silica is proposed using a rational processing of quartz-based ores with the help of a fluorination method. The different steps of the process are described, including the kinetics of the interaction mechanism of ammonium bifluoride with the initial raw materials, the sublimation of ammonium fluorosilicate and the formation of nanometric amorphous silica. Rate constants and activation energy of the chemical reactions are calculated.     

Open tubular capillary electrochromatography migration behavior of enkephalins in etched chemically modified fused silica capillaries

Fused silica capillaries for use in electrophoretic analyses are etched with ammonium bifluoride in the presence of a second inorganic salt (CuCl(2), CrCl(3), NaNO(3), or (NH(4))(2)CO(3)). The effects of the presence of these inorganic components in the surface matrix on the electromigration behavior of enkephalins are evaluated. Resolution, efficiency and peak shape are used to compare the various columns. In some cases the etched surface is then modified by the addition of an octadecyl moiety using a silanization/hydrosilation procedure. The surface properties of the etched capillaries can also be evaluated by electroosmotic flow measurements. RSDs of migration times under identical experimental conditions were <1%.     

Designer chiral quaternary ammonium bifluorides as an efficient catalyst for asymmetric nitroaldol reaction of silyl nitronates with aromatic aldehydes

Designer chiral quaternary ammonium bifluoride 1 has been prepared, and both its catalytic and its chiral efficiency have been clearly demonstrated by achieving the first catalytic asymmetric nitroaldol reaction of silyl nitronate with aldehydes. For instance, the reaction of trimethylsilyl nitronate 2 (R(1) = Me) with benzaldehyde (R(2) = Ph) in THF in the presence of (S,S)-1 (2 mol %) proceeded smoothly at -78 degrees C, giving the corresponding nitroaldol adduct 3 (R(1) = Me, R(2) = Ph) in 92% isolated yield (anti/syn = 92:8) with 95% ee (anti isomer). The method was found to be successfully applicable to other aromatic aldehydes and silyl nitronates, and a high level of anti selectivity and enantiomeric excess was constantly observed. This finding should lead to the further development of fluoride ion-catalyzed asymmetric carbon-carbon bond-forming reactions.     

Highly enantioselective michael addition of silyl nitronates to alpha,beta-unsaturated aldehydes catalyzed by designer chiral ammonium bifluorides: efficient access to optically active gamma-nitro aldehydes and their enol silyl ethers

Highly enantioselective Michael addition of silyl nitronates to alpha,beta-unsaturated aldehydes has been accomplished by the utilization of designer N-spiro C2-symmetric chiral quaternary ammonium bifluoride 1 as an efficient catalyst, providing direct access to both optically active gamma-nitro aldehydes, a very useful precursor to various complex organic molecules including aminocarbonyls, and their enol silyl ethers, a Mukaiyama donor of potential synthetic utility for further selective transformations. For instance, the reaction of trimethylsilyl nitronate 2 (R1 = Me) with trans-cinnamaldehyde (R2 = Ph, R3 = H) in toluene in the presence of (R,R)-1 (2 mol %) proceeded smoothly at -78 degrees C to give the desired enol silyl ether 3 (R1 = Me, R2 = Ph, R3 = H) in 90% isolated yield (anti/syn = 83:17) with 97% ee (anti isomer), and simple treatment of 3 thus obtained with 1 N HCl in THF at 0 degrees C afforded the corresponding gamma-nitro aldehyde 4 quantitatively without loss of diastereo- and enantioselectivity.     

Ring opening of sugar-derived epoxides by TBAF/KHF2: An attractive alternative for the introduction of fluorine into the carbohydrate scaffold

A stable and commercially available reagent mixture, composed of tetrabutylammonium bifluoride/potassium bifluoride (TBAF/KHF₂), was found to be effective for the nucleophilic ring opening reactions of sugar-derived epoxides with fluoride. Different sugar-derived epoxide precursors, including 1-thioglycosides can be ring-opened to afford fluorinated carbohydrate products in high yields and in short reaction times.     

过硫酸铵氧化-亚铁容量法测定高温合金及钢铁中高铬含量

在航空行业标准HB 5220.15-1995的基础上,采用过硫酸铵氧化-亚铁容量法测定高温合金及钢铁中高铬含量的试验方法,通过试验确定了试样量、硫酸和磷酸等试剂用量。该方法对高温合金样品中铬含量测定结果的相对标准偏差不大于0.13%(n=8),回收率为100.04%~100.49%。方法稳定性和重复性好,适用于铬含量为30.00%~50.00%的高温合金及钢铁样品。     

New synthesis routes to 2-halopyridines. III. 2-fluoropyridine

The solvent-free fluorination of 2-chloropyridine (III) with alkali metal fluorides and bifluorides was investigated. While complete degradation occurred with potassium fluoride at 315°, the use of potassium bifluoride under identical conditions provided a 74% yield of 2-fluoro-pyridine (II). Sodium bifluoride gave only a 3.5% yield of the desired product. These results are discussed in the light of: activation of the substrate, properties of the fluorinating agents, and the stability of 2-fluoropyridine.     

Precise and accurate determination of chromium in steel

Determination of chromium(VI) by addition of weighed amounts of solid ammonium ferrous sulfate in excess and back-titration with permanganate, using spectrophotometric end-point detection, is applied to the determination of chromium in steel. Except in the case of vanadium. and especially of vanadium + tungsten, very high selectivity and precision are claimed. Relative standard deviations of the order of 0.05% to 0.15% were found. Recoveries in excess of 99.95% were obtained in most cases. Results for the determination of chromium in standard samples of steel are given.     

Simultaneous determination of hexavalent and total chromium in water and plating baths by spectrophotometry

A new spectrophotometric determination method of hexavalent chromium in waste water and plating baths is described based on the oxidation of beryllon III by chromium(VI) in 0.02M sulphuric acid medium. The decrease in the absorbance of beryllon III was measured at 482 nm with an apparent molar absorptivity of 5.15 x 10(4)1.mole(-1).cm(-1). Beer's law was obeyed for chromium(VI) over the range 0-25 mug/25 ml. After the oxidation of Cr(III) to Cr(VI) by ammonium persulphate, total chromium can be determined. Therefore, chromium(III) can be calculated by subtracting chromium(VI) from total chromium. The detection limit is 0.015 and 0.020 mug/25 ml for chromium(VI) and total chromium, respectively. A sensitive spectrophotometric method for trace Cr(III) and Cr(VI) in waste water and plating baths was developed with good precision and accuracy. The reaction is also discussed.     

Asymmetric Michael addition of silyl nitronates to cyclic α,β-unsaturated ketones catalyzed by chiral quaternary ammonium bifluorides: isolation and selective functionalization of enol silyl ethers of optically active γ-nitro ketones

Highly enantioselective Michael addition of silyl nitronates to cyclic α,β-unsaturated ketones has been accomplished by the utilization of N-spiro C₂-symmetric chiral quaternary ammonium bifluoride 1 as an efficient catalyst, offering a new route to the enol silyl ethers of optically active γ-nitro ketones. The synthetic utility of this transformation has been demonstrated by the diastereoselective derivatizations of the optically active enol silyl ethers to the corresponding α-substituted cyclic ketones having three consecutive stereochemically defined stereocenters.     

Ammonium hexanitratocerate(IV) as an oxidizing agent-VI Determination of chronuum(III) through oxidation to chromium(VI) at room temperature

A new method has been developed for the determination of chromium(III), depending on its oxidation to chromium(VI) at room temperature by treatment with 50-100% excess of ammonium hexanitratocerate(IV) in 1.0M nitric acid medium. The reaction is complete within 15 min. The unreacted cerium(IV) is titrated potentiometrically with sodium oxalate.     

Use of inorganic salts during the etching process in the fabrication of chemically modified capillaries for open tubular electrochromatography

Capillaries for use in electrophoretic analyses are etched with ammonium bifluoride and in some cases a second inorganic salt is included in the process. The effects of the presence of these inorganic components in the surface matrix on the electromigration of heterocyclic aromatic amines and enkephalins are evaluated. Resolution, efficiency, and peak shape are used to compare the various columns. In one instance, the etched surface is then modified by the addition of an octadecyl moiety using a silanization/hydrosilation procedure. The surface properties of the various etched capillaries are also compared by electroosmotic flow measurements.     

The comparison of calculated transition probabilities with luminescence characteristics of erbium(III) in fluoride glasses and in the mixed yttrium-zirconium oxide crystal

Fluorozirconate glasses containing 2 mole% ErF₃ were prepared by melting the binary fluorides with ammonium bifluoride under an atmosphere of carbon tetrachloride and argon at 850°C. Absorption spectra of these glasses were obtained and the Judd-Ofelt parameters were calculated. Emission spectra and lifetimes of erbium in fluorozirconate glass, in lead-gallium-zinc fluoride glass, and in yttrium-zirconium oxide crystal were measured and compared with the theoretical calculations. Laser emission lines in these materials are deduced from these measurements. It is suggested that materials doped with erbium may serve as light sources for fiber optic waveguides made from the undoped materials.     

Speciation of chromium in mineral waters and salinas by solid-phase extraction and graphite furnace atomic absorption spectrometry

A simple GF-AAS method for speciation analysis of chromium in mineral waters and salinas was developed. Cr(VI) species were separated from Cr(III) by solid-phase extraction with APDC (ammonium pyrrolidinedithiocarbamate). The APDC complexes were formed in the sample solution under proper conditions, adsorbed on Diaion HP-2MG resin and the resin was separated from the sample. After elution with concentrated nitric acid Cr(VI) was determined by GF-AAS. Total chromium was determined by GF-AAS directly in the sample and Cr(III) concentration was calculated as the difference between those results.

The detection limit of the method defined as 3 s of background variation was 0.03 μg l⁻¹ for Cr(VI) and 0.3 μg l⁻¹ for total chromium. RSD for Cr(VI) determination at the concentration of 0.14 μg l⁻¹ was 9%, and for total chromium at the concentration of 5.6 μg l⁻¹ was 5%. The recovery of Cr(VI) was in the range of 94–100%, dependently on type of the sample.

The investigation of recovery of the spiked Cr(VI) showed that at concentration levels near 1 μg l⁻¹ and lower recovery may be reduced significantly even by pure reagents that seem to be free from any reductants.     

硫酸铅分离-EDTA滴定法测定铜闪速冶炼烟尘中的铅

建立了用硫酸形成硫酸铅沉淀加以分离,再用EDTA络合滴定法测定铜闪速冶炼烟尘中铅量的方法。试样用盐酸、硝酸、硫酸、氟化氢铵和高氯酸溶解,用硫酸沉淀铅与其它干扰元素分离,沉淀溶解于乙酸-乙酸钠缓冲溶液中,以巯基乙酸掩蔽铋,抗坏血酸掩蔽铁,二甲酚橙作指示剂,用Na2EDTA标准滴定溶液滴定溶液中铅含量,采用火焰原子吸收光谱法测定滤液中铅含量加以补正。实验结果表明,沉淀时硫酸(1+24)加入量为50 mL,无水乙醇加入量为10 mL,乙酸-乙酸钠缓冲溶液加入量为30 mL。方法相对标准偏差(RSD)在0.35%~1.5%,加标回收率为在99.0%~101%。完全满足生产控制分析的要求,同时也可以作为类似物料中铅分析的参考方法。     

Characterization of the interactions in polymer-filler systems by inverse gas chromatography

Chromium is a primary drinking water contaminant in the USA with hexavalent chromium, Cr(VI), being the most toxic form of the metal. As a required step in developing a revised state drinking water standard for chromium, the California Department of Health Services recently issued a new Public Health Goal (PHG) of 2.5 microg/l for total chromium and 0.2 microg/l for Cr(VI). Hexavalent chromium can be determined (as chromate) by ion chromatography, as described in US Evironmental Protection Agency Method 218.6; however, the method as originally published does not allow sufficient sensitivity for analysis at the California PHG level of 0.2 microg/l. Modification of the conditions described in Method 218.6, including the use of a lower eluent flow-rate, larger reaction coil, and larger injection volume, significantly increases the method sensitivity. The modified method, which uses IonPac NG1 and AS7 guard and analytical columns, an eluent of 250 mM ammonium sulfate-100 mM ammonium hydroxide operated at 1.0 ml/min, a 1000 microl injection volume, and postcolumn reaction with 2 mM diphenylcarbazide-10% methanol-0.5 M sulfuric acid (using a 750 microl reaction coil) followed by UV-Vis detection at 530 nm, permits a method detection limit for chromate of 0.02 microg/l. This results in a quantitation limit of 0.06 microg/l, which is more than sufficient for analysis at the California PHG level. Calibration is linear over the range of 0.1-10 microg/l and quantitative recoveries (>80%) are obtained for chromate spiked at 0.2 microg/l in drinking water. The modified method provides acceptable performance, in terms of chromate peak shape and recovery, in the presence of up to 1000 mg/l chloride or 2000 mg/l sulfate.     

Separation of chromium(III) and chromium(VI) by ion chromatography and an inductively coupled plasma mass spectrometer as element-selective detector

Due to its extensive use in industrial processes, large quantities of chromium compounds are discharged into the environment. Common approaches for the speciation of Cr employ the determination of Cr(VI) and total Cr. The focus of the present work was a separation of Cr(III) and Cr(VI) species, with a minimum of sample preparation, by keeping an eye on the more relevant and toxic Cr(VI). For the successful simultaneous separation of both chromium species we implemented a RSpak NN-814 4DP (PEEK, 4 mm x 150 mm) multi-mode column using an eluent containing 90 mM ammonium sulfate and 10 mM ammonium nitrate, adjusted to pH 3.5. At a flow of 0.3 mL min(-1) the separation of both Cr species was possible within 8 min. Further the octopole reaction system of the inductively coupled plasma mass spectrometer was systematically studied and optimised to reduce the influence of polyatomic interferences. The major advantage of the developed method compared to published methods is that a derivatisation of the Cr(III) species--an invasion in the speciation--is not required. With the used multi-mode column both chromium species are retained. Furthermore the pH of the mobile phase (pH 3.5) prevents reduction of Cr(VI) as well as precipitation of Cr(III) during the analysis. A limit of determination of approximately 0.5 microg L(-1) for both chromium species with an injection volume of 25 microL was obtained. The optimised method was successfully applied to the determination of Cr(VI) in cement samples as well as chromium speciation analysis in homeopathic drugs.     

Determination of chromium in ores, rocks and related materials, iron, steel and non-ferrous alloys by atomic-absorption spectrophotometry after separation by tribenzylamine-chloroform extraction

A method for determining trace and moderate amounts of chromium in ores, concentrates, rocks, soils and clays is described. After fusion of the sample with sodium peroxide, the melt is dissolved in dilute sulphuric acid. The chromium(III) produced by the hydrogen peroxide formed is co-precipitated with hydrous ferric oxide. The precipitate is dissolved in 0.7M sulphuric acid and chromium oxidized to chromium(VI) with ceric ammonium sulphate. The chromium(VI) is extracted as an ion-association complex into chloroform containing tribenzylamine and stripped with ammoniacal hydrogen peroxide. This solution is acidified with perchloric acid and chromium determined by atomic-absorption spectrophotometry in an air-acetylene flame, at 357.9 nm. Barium and strontium do not interfere. The procedure is also applicable to iron and steel, and nickel-copper, aluminium and zirconium alloys. Up to 5 mg of manganese and 10 mg each of molybdenum and vanadium will not interfere. In the absence of vanadium, up to 10 mg of tungsten will not interfere. In the presence of 1 mg of vanadium, up to 1 mg of tungsten will not interfere.     

Sequential extraction of trace metals from sediments

With the aim of harmonizing the methodology associated with the trace metal partitioning in sediments, a group of European researchers proposed a three-step sequential extraction scheme using acetic acid, hydroxylamine hydrochloride and ammonium acetate as extracting agents. The metal content in each extract is mainly determined by AAS or ICP.In this paper, the validation of chromium determination in the extracts by AAS is described. The optimum instrumental conditions and the matrix effects of the different reagents used in the extraction scheme are studied for Cr(III) and Cr(VI) solutions by FAAS and ETAAS techniques. The effect of the concomitant species are also studied in the different extracts. The interfering effects are minimized by means of releaser agent for FAAS.The addition of 1% oxine is recommended for acetic acid and hydroxylamine extracts, whereas for step 3 the use of a releaser agent is not necessary. For ETAAS, the use of a calibration graph with pyrolytically-coated tubes gave satisfactory results.The procedure of analysis is applied to chromium partitioning in two sediments with certified total chromium content and to different sediments from Rio dos Sinos of Brazil.From the results obtained it is recommended to measure chromium contents in steps 1 and 2 by ETAAS and the content of step 3 by FAAS.