Determination of trace impurities in some nickel compounds by flame atomic absorption spectrometry after solid phase extraction using Amberlite XAD-16 resin

A simple flame atomic absorption spectrometric (FAAS) procedure for the determination of lead, bismuth, gold, palladium and cadmium as impurities in Raney nickel and nickel oxide was developed using a preconcentration step on an Amberlite XAD-16 resin packed column. Lead, bismuth, gold, palladium and cadmium were quantitatively recovered and separated from a solution containing 1 M HCl and 0.3 M NaI by the column system. Effects of the various parameters such as reagent concentrations, sample volume, matrix effects, etc. have been investigated. Under optimized conditions, the relative standard deviation of the combined method of sample treatment, preconcentration and determination with FAAS (n = 7) is generally lower than 12%. The limit of detection (3s, n = 20) was between 10–270 ng/g. The results were used for separation and preconcentration of five trace elements from nickel matrices.     

Spectrographic analysis of boron nitride for trace impurities

A d.c. arc emission spectrographic method has been developed for the determination of nine trace impurities in boron nitride. The charge for exciting the sample contains equal quantities of boron nitride and graphite (containing 2% NaF as carrier and 1% La(2)O(3) as an internal standard). The method is useful in the determination of impurities in the range 2-1000 ppm, with a mean relative standard deviation of 13%.     

Determination of trace impurities in some nickel compounds by flame atomic absorption spectrometry after solid phase extraction using Amberlite XAD-16 resin

A simple flame atomic absorption spectrometric (FAAS) procedure for the determination of lead, bismuth, gold, palladium and cadmium as impurities in Raney nickel and nickel oxide was developed using a preconcentration step on an Amberlite XAD-16 resin packed column. Lead, bismuth, gold, palladium and cadmium were quantitatively recovered and separated from a solution containing 1 M HCl and 0.3 M NaI by the column system. Effects of the various parameters such as reagent concentrations, sample volume, matrix effects, etc. have been investigated. Under optimized conditions, the relative standard deviation of the combined method of sample treatment, preconcentration and determination with FAAS (n = 7) is generally lower than 12%. The limit of detection (3s, n = 20) was between 10–270 ng/g. The results were used for separation and preconcentration of five trace elements from nickel matrices. Received: 8 February 2000 / Revised: 31 March 2000 / Accepted: 7 April 2000     

火试金法测定铅冶炼渣中的金、银含量

建立了铅冶炼渣中的金银含量的测定方法,采用火试金法富集铅冶炼渣中的金、银,铅扣经灰吹后,形成金银合粒,合粒中除有金银外,还残留微量的铅铋杂质,合粒经硝酸分金后,实现金银分离,得到金粒和分金溶液。合粒中杂质保留在分金溶液中,分金溶液经酸处理,采用电感耦合等离子体发射光谱(ICP-OES)法测定其中杂质量和微量的金量。金粒质量补正分金溶液中微量金量即为样品中的金量,合粒质量减去金粒质量和杂质量即为银量。ICP-OES法测定杂质解决了合粒中铅铋残留和分金失误造成微量金进入分金溶液现象。方法精密度较好,加标回收率分别为银98.6%～100%,金96.2%～102%。方法准确、方便、快捷,能很好地满足铅冶炼渣中金、银含量的测定。     

火试金法测定铅冶炼渣中的金、银含量

建立了铅冶炼渣中的金银含量的测定方法,采用火试金法富集铅冶炼渣中的金、银,铅扣经灰吹后,形成金银合粒,合粒中除有金银外,还残留微量的铅铋杂质,合粒经硝酸分金后,实现金银分离,得到金粒和分金溶液。合粒中杂质保留在分金溶液中,分金溶液经酸处理,采用电感耦合等离子体发射光谱(ICP-OES)法测定其中杂质量和微量的金量。金粒质量补正分金溶液中微量金量即为样品中的金量,合粒质量减去金粒质量和杂质量即为银量。ICP-OES法测定杂质解决了合粒中铅铋残留和分金失误造成微量金进入分金溶液现象。方法精密度较好,加标回收率分别为银98.6%～100%,金96.2%～102%。方法准确、方便、快捷,能很好地满足铅冶炼渣中金、银含量的测定。     

Geometric, electronic, and bonding properties of AuNM (N = 1-7, M = Ni, Pd, Pt) clusters

Employing first-principles methods, based on density functional theory, we report the ground state geometric and electronic structures of gold clusters doped with platinum group atoms, Au(N)M (N = 1-7, M = Ni, Pd, Pt). The stability and electronic properties of Ni-doped gold clusters are similar to that of pure gold clusters with an enhancement of bond strength. Due to the strong d-d or s-d interplay between impurities and gold atoms originating in the relativistic effects and unique properties of dopant delocalized s-electrons in Pd- and Pt-doped gold clusters, the dopant atoms markedly change the geometric and electronic properties of gold clusters, and stronger bond energies are found in Pt-doped clusters. The Mulliken populations analysis of impurities and detailed decompositions of bond energies as well as a variety of density of states of the most stable dopant gold clusters are given to understand the different effects of individual dopant atom on bonding and electronic properties of dopant gold clusters. From the electronic properties of dopant gold clusters, the different chemical reactivity toward O(2), CO, or NO molecule is predicted in transition metal-doped gold clusters compared to pure gold clusters.     

Spectrochemical determination of impurities in telluric acid

An emission spectrographic method is described for determination of 20 elements present as impurities in telluric acid. Samples are excited in a 12-A. d.c. arc with the use of NaCl-KCl as a spectrographic buffer and germanium as internal standard. The limit of determination lies between 10(-5) and 10(-2)%. The precision of the method calculated as relative standard deviation is 10-25%.     

Determination of effective temperatures in a two-jet arc plasmatron

The author gives critical remarks on the determination of trace impurities in powdered samples by atomic emission spectrometry using a two-jet arc plasmatron.     

Spectrographic analysis of high-purity nickel oxide for twenty-one trace impurities, with use of a new buffer

A spectrographic method for the determination of twenty-one trace impurities in high-purity nickel oxide by the d.c. arc technique has been developed. A mixture of graphite and indium oxide in the ratio 2:1 is used as buffer. The lowest determination limits for various elements lie between 1 and 10 ppm with an average relative standard deviation of +/- 12%.     

Spectrochemical determination of rare- earth metals in uranium and its salts

An emission spectrographic procedure is described for the determination of 0.05-4 ppm of rare-earth metals in uranium metal and its salts. Uranium is extracted from the sample with tributyl phosphate, and the impurities are separated by precipitation as hydroxides and oxalates, with yttrium as a carrier. After conversion into the oxides, the rare-earth metals are mixed with graphite and excited in a d.c. arc.     

Voltammetric determination of trace amounts of gold(III) with a carbon paste electrode modified with chelating resin

A carbon paste electrode modified with chelating resin (ammino-isopropylmercaptan-type cross-linked chelating resins) for the voltammetric determination of gold(III) was characterized by cyclic voltammetry. The gold(III) ion is accumulated on the surface of the modified electrode only by the chelating effect of the modifier in the carbon paste, without application of a potential. After exchange of the medium the accumulated amount of gold(III) is determined by voltammetry in a blank electrolyte solution. The response depends on both the concentration of gold and the accumulation time. For a 5-min preconcentration time, a linear calibration graph was obtained in the range 3 × 10^?8-1 × 10^?6 M and the detection limit was about 1 × 10^?8 M. A combination of chemical and electrochemical renewal allows the use of a single modified electrode in multiple analytical determinations over several days. For ten preconcentration—determination—renewal cycles [2 × 10^?7 M Au(III)], the response could be reproduced with 4.7% relative standard deviation. Many parameters such as the composition of the paste and pH influence the response of the measurement. Many other metal ions have no or little effect on the determination of gold. The procedure was applied to the determination of gold in minerals, copper and anode mud, with good results.     

The determination of copper at thin film electrodes by constant current stripping potentiometry

A comparison of the determination of copper by constant current stripping potentiometry (CCSP) at mercury and gold films has been carried out. The preferred solution conditions for the mercury film study were determined to be 0.1M ammonium acetate at pH 4.5 and 0.1M HCl for the gold film study. The influence of chloride on the stripping signal was investigated and it was found that for the mercury film conditions, well-formed stripping signals could be obtained up to a chloride concentration of 0.5 M which permitted the ready determination of copper in seawater. With the gold film, high chloride concentrations affected both the film stability and the glassy carbon surface and repeatable results were difficult to obtain. The optimized CCSP methods were applied to various aqueous samples including tap water, seawater, TCLP (acetic acid) extracts as well as TCLP extracts using groundwater and ocean water. Based on the results obtained for these various matrices, it was concluded that there are several advantages favoring the mercury film. The interference from organic components in the sample matrix on the general applicability of CCSP for the determination of copper at either a mercury or gold film is discussed.     

Application of the mnf controlled dc generator to the spectral analysis of impurities in lead

A method for the determination of impurities in lead is described. The sample is excited by the new MNF controlled arc generator. The method is suitable for determination of the following seven impurities into the ranges of concentration shown: Sb (50–5400 p.p.m.),As (20–1000 p.p.m.), Bi (10–940p.p.m.),Cu (1–760 p.p.m.), Zn (8–280p.p.m.), Ag (5–160p.p.m.) and Sn (5–1800 p.p.m.). The average square error is 3.0%.     

Electrochemical Formation of Nanostructured Gold Surfaces on Glassy Carbon for the Determination of Dopamine

Nanostructured gold surfaces were prepared by potentiostatic, potentiodynamic or galvanostatic Au electrodeposition on glassy carbon electrodes. The nanostructured gold electrodes (nsAu/GC) were used for the determination of dopamine (DA) in aqueous media. A directly proportional relationship was found between the peak current for DA (obtained by square wave voltammetry, SWV) and its concentration for all cases. However, the best performance for DA determination was attained with potentiodynamically electrodeposited surfaces. The SWV peak current was linearly dependent on DA concentration up to 10 μM, with a detection limit (3σ) of 0.57 μM, and a correlation coefficient (r) of 0.9966. A study on the effect of common interfering species such as ascorbic acid (AA) and uric acid (UA) on DA determination was also carried out. The use of a nanostructured surface gives rise to peaks for AA and UA that appear at 0.15–0.20 V above the peak potential for DA. The detection limit obtained for dopamine is below 1 μM in the presence of 0.1 mM AA and 0.1 mM UA. Thus, nanostructuring of glassy carbon surfaces with gold conveniently and easily improves the detection of DA in the presence of their principal interfering species.     

Extractive separation and spectrophotometric determination of palladium and platinum with dithizone in the presence of stannous chloride

The conditions [acid used, presence of chloride and tin(II)] for the extractive separation and spectrophotometric determination of palladium and platinum as the dithizonates Pd(HDz)(2) and Pt(HDz)(2) have been examined. In the absence of stannous chloride platinum does not undergo extraction. Conditions for the separation and determination of these metals in the presence of mercury, gold and copper, which are also extracted with dithizone into carbon tetrachloride or chloroform under the conditions suitable for palladium (1M sulphuric acid/0.1M hydrochloric acid), have been defined. The mercury and gold dithizonates are formed quickly and can be removed before the palladium and platinum compounds have had time to form. They can be decomposed with iodide. Copper dithizonate is decomposed by reduction with tin(II). The proposed procedure has been applied to the determination of palladium in technical platinum metal.     

Nonenzymatic determination of glucose on electrodes prepared by directed electrochemical nanowire assembly (DENA)

The analytical characteristics of gold nanowires prepared by direct electrochemical synthesis were studied with the use of the amperometric determination of glucose as an example. The applicability of the gold nanowires to the determination of glucose in a neutral medium (a phosphate buffer solution with pH 7.2) over a concentration range from 1 × 10^–4 to 5 × 10^–3 M at a detection potential of +0.35 V was shown. It was found that the sensitivity of a nonenzymatic sensor for the determination of glucose on the gold nanowires was high: 3.7 × 10^–4 A M^–1 m^–2. The limit of detection was 3.3 × 10^–5 M.     

电感耦合等离子体质谱法测定高纯金中痕量杂质

建立了高纯金中40余种痕量杂质的电感耦合等离子体质谱测定方法。方法检出限为0．0006～0．21μg/L。考察了基体Au的谱干扰及基体效应,采用Cs内标补偿基体对待测信号的抑制作用。方法简单、快速、灵敏、准确。     

Separation and determination of synthetic impurities of sildenafil (Viagra) by reversed-phase high-performance liquid chromatography.

A simple and rapid high-performance liquid chromatographic method for the separation and determination of process-related impurities of sildenafil was developed. The separation was achieved on a reversed-phase C18 column using acetonitrile-0.05 M potassium dihydrogen orthophosphate (70:30 v/v) as a mobile solvent at a flow rate of 1.0 ml/min and UV detection at 230 nm. The method was used not only for quality assurance, but also for monitoring the chemical reactions during the synthesis of sildenafil. It was found to be specific, precise and reliable for the determination of all process-related impurities of sildenafil in bulk drugs and formulations.     

Poly(adenine) DNA-Templated Gold Nanocluster-Based Fluorescent Strategy for the Determination of Thiol-Containing Pharmaceuticals

The fluorescence intensity of poly(adenine) DNA-templated gold nanoclusters was shown to be significantly quenched by N-acetylcysteine through the formation of the Au-S metal-ligand bonds. On the basis of the fluorescence quenching phenomenon, a sensitive, turn-off, and label-free fluorescence method has been designed for the determination of thiol-containing pharmaceuticals using poly(adenine) DNA-templated gold nanoclusters as fluorescent probes. The assay exhibited sensitive determination of N-acetylcysteine with a linear dynamic range from 10?nM to 10?μM and a limit of detection of 3?nM. Furthermore, the proposed strategy was successfully applied for the determination of N-acetylcysteine levels in acetylcysteine granule samples. Thus, the method could provide a sensitive, simple, and rapid fluorescent sensing platform for the determination of thiol-containing pharmaceuticals.     

Elemental trace determinations in aluminium by enrichment onto activated carbon combined with direct current arc optical emission spectrography

Summary A combined procedure including enrichment by adsorption onto activated carbon and direct current (dc) arc emission spectrography has been investigated for elemental determination. In order to obtain reproducible volatilization of the analyte in the dc arc, the activated carbon was mixed with graphite powder and the arc operated in an argon atmosphere. The procedure has been used to determine some trace impurities in high-purity aluminium metal. The analytical error in the concentration range of 10^–3–10^–5% was less than 10% and the relative standard deviation was below 12%.

---

Emissionspektroskopische Bestimmung von Spurenelementen in Aluminium mit Gleichstrom-Lichtbogen nach ihrer vorherigen Anreicherung an Aktivkohle