Distribution coefficients and cation-exchange behaviour of some ammines and aquo complexes of metallic elements in ammonium nitrate solution

Comparative cation-exchange distribution coefficients of ammines and aquo complexes of Cu(II), Ni(II), Cd, Zn, Ag, Co(II)/(III), Hg(II), Pd(II), Au(III) and Pt(II) were determined in 0.1, 0.2, 0.5 and 1.0 M ammonium nitrate solution. The values for mercury(II) in ammonium chloride and of the ammine of copper(II) in ammonium citrate and ammonium sulphosalicylate solutions were also measured. The ion-exchange behaviour of the ammines is discussed and some possible separations are demonstrated by the experimental elution curves for the ion pairs Mg-Ni(II), Ca-Zn, Yb-Cd and Fe(III)-Cu(II).     

Determination of uranium in technological waters by ion-pair liquid chromatography

U(VI) can be efficiently determined in the range 0.3-1OmM after its separation from Th(IV), Zr(IV), Al(III), Fe(III), lanthanides and other ions by ion-pair liquid chromatography on a 3 x 150 mm glass column packed with Separon SGX C18 modified with sorbed ammonium dodecyl sulphate. Traces of uranium can be preconcentrated directly on the analytical column from acidified water solutions and separated from Th, Zr, Al, Fe, lanthanides and other elements, with an enrichment factor of $ 100 and recovery of 98 +/- 8%, by isocratic or pH or concentration gradient elution with ammonium 2-hydroxy-2-methylpropionate or ammonium citrate solution. Post-column derivatization with 25muM Arsenazo III in 0.1M formate buffer at pH 2.7 is used for detection and quantification.     

2-Nitrodiphenylamine as a versatile high-potential reversible oxidation-reduction indicator

The use of 2-nitrodiphenylamine as a reversible indicator has been investigated in the titration of iron(II) with cerium(IV) sulphate, potassium dichromate and sodium vanadate in sulphuric acid media. Accurate results can be obtained with cerium(IV) sulphate in 0.5–5.0 M acid, with potassium dichromate in 5.0–7.0 M acid, and with sodium vanadate in 5.0–7.5 M acid. With cerium(IV) sulphate the titrations are preferably conducted in 2.0 M sulphuric acid or in a 1.0 M. sulphuric acid-1.0 M pechloric acid medium. Tungstic acid, acetic acid, arsenic(III) and manganese(II) do not interfere. In titrations of iron(II) with dichromate and vanadate, the colour changes at the end-point are much more vivid with 2-nitrodiphenylamine than with ferroin.     

Spectrophotometric determination of dissolved tri n-butyl phosphate in aqueous streams of Purex process

A spectrophotometric method is developed for the determination of dissolved tri-n butyl phosphate (TBP) in aqueous streams of Purex process used in nuclear fuel reprocessing. The method is based on the formation of phosphomolybdate with added ammonium molybdate followed by reduction with hydrazine sulphate in acid medium. Orthophosphate and molybdate ions combine in acidic solution to give molybdophosphoric (phosphomolybdic) acid, which upon selective reduction (with hydrazinium sulphate) produces a blue colour, due to molybdenum blue. The intensity of blue colour is proportional to the amount of phosphate. If the acidity at the time of reduction is 0.5?M in sulphuric acid and hydrazinium sulphate is the reductant, the resulting blue complex exhibits maximum absorption at 810?C840?nm. The system obeys Lambert?CBeer??s law at 830?nm in the concentration range of 0.1?C1.0???g/ml of phosphate. Molar Absorptivity was determined to be 3.1?×?10^4?L?mol^?1?cm^?1 at 830?nm. The results obtained are reproducible with standard deviation of 1?% and relative error less than 2?% and are in good agreement with those obtained by ion chromatographic technique.     

Methyl isobutyl ketone extraction of iodide complexes from sulphuric acid-potassium iodide media and back-extraction into an aqueous phase

The methyl isobutyl ketone extraction of 15 elements (Cu, Ag, Zn, Cd, In, Tl, Ge, Sn, As, Sb, Bi, Se, Te, Mo and Pd) as iodide complexes from 0.1-5 M sulphuric acid/0.01-0.5M potassium iodide media has been studied. At the optimum potassium iodide concentrations, and a 1:2 v v ratio of organic to aqueous phase, Cu(II), Ag, Cd, In(III), Tl(III), Sb(III), Bi, Te(IV) and palladium(II) are completely extracted in a single step from 1-5M sulphuric acid. All these elements except palladium are also quantitatively extracted from 0.05-0.5M iodide/2M sulphuric acid. Zn, Sn(IV) and As(III) are completely extracted at high acid and iodide concentrations, and at the highest concentrations of acid and iodide investigated, Ge is partly extracted and Mo(VI) is slightly extracted. The extraction of Se(IV) is incomplete because of its reduction to the elemental state by iodide. The back-extraction of the elements has also been investigated and the forms in which they are extracted and potential analytical separations and interferences are discussed.     

Preconcentration of trace amounts of mercury(II) in water on picolinic acid amide-containing resin

A chelating polystyrene/divinylbenzene-based resin with picolinic acid amide as the functional group was synthesised and characterised by its water regain capacity (0.31 g g^?1), stability towards sulphuric acid and alkali, and metal ion-exchange capacities. Mercury(II) is absorbed maximally at about pH 5.4 and can be eluted with 2 M sulphuric acid with 96% efficiency. It can thus be separated from Na(I), K(I), Ca(Il), Mg(Il), Co(Il), Cd(Il), Ni(II), Zn(II), Cr (III) and Fe (III). The method is applied to determination of mercury (II) in synthetic mixtures and in river water.     

Determination of silver, antimony, bismuth, copper, cadmium and indium in ores, concentrates and related materials by atomic-absorption spectrophotometry after methyl isobutyl ketone extraction as iodides

Methods for determining ~ 0.2 mug g or more of silver and cadmium, ~ 0.5 mug g or more of copper and ~ 5 mug g or more of antimony, bismuth and indium in ores, concentrates and related materials are described. After sample decomposition and recovery of antimony and bismuth retained by lead and calcium sulphates, by co-precipitation with hydrous ferric oxide at pH 6.20 +/- 0.05, iron(III) is reduced to iron(II) with ascorbic acid, and antimony, bismuth, copper, cadmium and indium are separated from the remaining matrix elements by a single methyl isobutyl ketone extraction of their iodides from ~2M sulphuric acid-0.1M potassium iodide. The extract is washed with a sulphuric acid-potassium iodide solution of the same composition to remove residual iron and co-extracted zinc, and the extracted elements are stripped from the extract with 20% v v nitric acid-20% v v hydrogen peroxide. Alternatively, after the removal of lead sulphate by filtration, silver, copper, cadmium and indium can be extracted under the same conditions and stripped with 40% v v nitric acid-25% v v hydrochloric acid. The strip solutions are treated with sulphuric and perchloric acids and ultimately evaporated to dry ness. The individual elements are determined in a 24% v v hydrochloric acid medium containing 1000 mug of potassium per ml by atomic-absorption spectrophotometry with an air-acetylene flame. Tin, arsenic and molybdenum are not co-extracted under the conditions above. Results obtained for silver, antimony, bismuth and indium in some Canadian certified reference materials by these methods are compared with those obtained earlier by previously published methods.     

Extraction of sulphuric acid from technological solution of hydroxylamine sulphate

The extraction of sulphuric acid from solutions containing hydroxylamine sulphate and ammonium sulphate with Cyanex 923 and the acid stripping from loaded Cyanex 923 are studied at 20 and 50°C. The effect of the numbers of extraction and stripping stages and the volume phase ratios in extraction and stripping upon sulphuric acid recovery is discussed. The process can be design to obtain a high or low recovery of sulphuric acid but with its low or high concentration, respectively.     

Combination collectors in adsorption colloid flotation for multielement determination in waters by neutron activation

A method is described for the collection of small amounts of both anions and cations in water samples by adsorption colloid flotation with a combination collector, prior to quantitation by neutron activation. In the presence of 20 mg of iron(III) and 2 ml of 0.1 M ammonium pyrrolidinedithiocarbamate, As(V), Cd(II), Co(II), Cu(II), Hg(II), Mo(VI), Sn(IV), Sb(III), Te(VI), Ti(IV), U(VI), V(V) and W(VI) are quantitatively collected from 1 -l samples at a pH 5.8 ± 0.1; sodium dodecyl sulfate and sodium oleate are used as surfactant. Recoveries for all the elements tested are greater than 90%. Results for a number of elements in sea waer and an NBS water standard, SRM 1643a, are given.     

Thin-layer chromatography of inorganic ions on sulphoethyl cellulose in sulphuric acid and ammonium sulphate media

Summary Thin-layer chromatographic (TLC) behaviour of 51 inorganic ions on a strongly acidic cation-exchanger, sulphoethyl (SE) cellulose, has been studied systematically in sulphuric acid and ammonium sulphate media (0.01–0.2 mol dm⁻³). Some aspects of the adsorption behaviour of the inorganic ions on the SE-cellulose are compared with those on other cation-exchangers in the same eluent systems. The possibilities for TLC separations of analytical interest are also proposed on SE-cellulose in sulphuric acid and acid ammonium sulphate media.     

Evaluation of coupled transport across a liquid membrane as an analytical preconcentration technique

When two aqueous solutions are separated by a liquid membrane that contains a complexing agent which is a conjugate base of a weak acid, a metal ion can be transported from the solution of the higher pH against its concentration gradient into the more acidic solution. With Cu(II) as the analyte and a liquid membrane consisting of a mixture of oximes dissolved in kerosene, enrichment factors for a prescribed dialysis time in a simple experimental apparatus were nearly independent of Cu(II) concentration over the range 10(-4)-10(-7)M. With 0.1M hydrochloric acid as the receiver, the enrichment factor was independent of ionic strength and of sample pH in the range 4-9. The effect of sample pH on the interference of Fe(III) was examined. With a pH-2.5 formate buffer, the enrichment factor for Cu(II) decreased as the Fe(III) concentration increased, but in a pH-9.3 ammonium buffer, 0.14 mM Fe(III) did not interfere with the transport of Cu(II) from a 16muM copper sample.     

Determination of the expiration date of chemical solutions

Thirty-five chemical solutions, acids, bases, complexing, argentometric, reducing, oxidising, salts and eluent mixtures, were studied continuously over a 7.5-month period. Twenty-seven remained reasonably stable and had acceptable expiration dates, which were equal to or more than 2 months longer than the established average deviation of ±2% relative to the initial value. Exceptions were made for potassium permanganate (0.1 M), perchloric acid (0.1 M) and disodium hydrogen phosphate (10%) solutions, as well as for HPLC eluent mixtures, which showed stability with expiration dates equal to stated values or shorter by 1 month. The eight chemical solutions presenting expiration dating higher than 6 months were hydrochloric acid (0.1 and 1 M), sulphuric acid (0.5 and 1.5 M), ethylenediamine tetraacetic acid (EDTA) (0.1 M), silver nitrate (0.1 M), ammonium thiocyanate (0.1 M) and iodine (0.1 M). The present data is a suitable guideline for the date of several chemical solutions routinely used in the analytical laboratories.     

Vanadametry Estimation of Thiosulphate

1.(a) We have found that sodium thiosulphate is quantitatively oxidized to tetrathionate in five minutes at room temperature (28°) by excess sodium vanadate in a medium containing sulphuric acid at 0.06N to 0.1N concentration and a little copper sulphate as catalyst. (b) Quantitative emulation of sodium thiosulphate to tetrathionate has also been achieved by the action of excess sodium vanadate during five minutes at room temperature in a medium containing 2.0N—8.0N acetic acid and a little copper salt as catalyst. Further oxidation to sulphate does not occur, even if the mixture is heated to boiling. (c) The excess of unreacted vanadate in 1(a) and 1(b) can be titrated with a standard solution of ferrous ammonium sulphate using diphenylbenzidine as indicator, after adding the requisite quantity of syrupy phosphoric acid. 2. On the other hand, sodium thiosulphate is easily and quantitatively oxidized to sulphate at room temperature, when. acted upon by excess sodium vanadate in a medium containing hydrochloric acid at an overall concentration of 5-6N and 1.0 ml of iodine monochloride as catalyst. The time required for reaction is ten minutes. The unreacted vanadate can be estimated by titration with a standard solution of ferrous ammonium sulphate, using N-phenylanthranilic acid as indicator or with diphenylbenzidine as indicator after suitably diluting and adding phosphoric acid.     

N-oxides of 4-(5-nonyl)pyridine and trioctylamine as extractants for cerium(IV) and its separation from thorium(IV)

Trace level cerium has been oxidized to the quadrivalent state with potassium dichromate and shown to be preferentially extracted from very dilute mineral acid solutions and also from moderate nitric acid media by 0.1M solutions of 4-(5-nonyl)pyridine oxide and trioctylamine oxide dissolved in xylene. The dependence of extraction on the type of N-oxide, acid concentration and the N-oxide concentration has been investigated. The influence of the concentration of salting-out agents is described. Separation factors for a number of metal ions relative to cerium(IV) are reported for 0.1 M 4-(5-nonyl)pyridine oxide/xylene-0.1M sulphuric acid system. The ratio of the D for Ce(IV) to that of Ce(III) is greater than 10⁵, and the D for Ce(IV) is much greater than that for thorium(IV). Separation of cerium(IV) from thorium has been achieved from 0.1M sulphuric acid solutions using 0.1M 4-(5-nonyl)pyridine oxide/xylene as an extractant.     

The influence of complexing agents on the effectiveness of electrochemical masking with anionic surfactants in anodic stripping voltammetry

The influence of sodium dodecyl sulphate, sodium dodecyl sulphonate and sodium stearinate on the anodic stripping peaks of Tl(I), Pb(II), Cd(II), Cu(II) and In(III) was investigated. The supporting electrolytes were 0.5M sodium sulphate solution, 0.2M citrate solution (pH 3.7, 4.6 and 7.3), 0.5M tartrate solution (pH 4.4) and 0.1M solution of EDTA (pH 4.4). The composition of complex compounds forming in a solution under experimental conditions was defined. The conditions of ion reduction of metals on hanging mercury electrode during the electrolytical deposition were investigated. The investigation included an analysis of voltammetric curves of the metal ions. The obtained results suggest that "electrochemical masking" is much stronger in electrolytes containing a complexing agent than in the sodium sulphate solution. The influence of the complexing agent may not be explained in terms of the interaction between the form of the complex and the charge of the adsorbed surfactant particles; rather the complexing process is connected with indirect inhibition, i.e., by decreasing the rate of charge transfer reaction.     

Cation-exchange separation of strontium from manganese and other elements in citrate media

Mn(IT) can be eluted quantitatively with 0.067M ammonium citrate at pH 7.0 or 7.5 from a column of AG50W-X8 cationexchange resin (200-400 mesh), and separated from Sr which is retained. Mg, Ca, Cu(II), Zn and Co(II) accompany Mn(II). From citric acid solutions up to 1M (20%) and from 5 % citric acid solution at pH 2.2 both Mn(II) and Sr are retained very strongly. This is in agreement with some previous work but disagrees with a recent statement by others that 5 % citric acid at pH 2.2 is an effective eluting agent for Sr.     

Untersuchungen zur adsorptiven Anreicherung von Elementspuren an Adsorberharzen

Summary The adsorption behaviour of trace amounts of As(III), As(V), Fe(II), Hg(II), Pd(II), Pt(IV), Sb(V), Sn(II), Sn(IV) and Tl(III) from hydrochloric and hydrobromic acid solutions on Amberlite XAD-4 and XAD-7 resins by use of a chromatographic method was investigated. As expected, in certain acid concentrations, all of the elements are adsorbed partly or quantitatively. Furthermore, the adsorbability of 23 elements from sulphuric or hydrochloric acid solutions containing iodide or thiocyanate was examined. In accordance with analogous results for chloro- and bromocompounds it was found that the distribution behaviour of iodo- and thiocyanato-compounds is similar to that of corresponding solvent extraction systems. The adsorbed species of the trace compounds were estimated by comparison of the dependence of sorption rate on ligand concentration with the species distribution in the solution. The similarity of adsorbable and extractable species was discussed.

---

---

Teil II: Fresenius Z Anal Chem (1988) 331:588     

Behaviour of the platinum electrode as a pH electrode

The platinum wire electrode behaves as a good pH electrode in the titration of 1.0 and 0.1N sulphuric or hydrochloric acid with the equivalent concentration of sodium hydroxide. The efficiency is greater when sulphuric acid is used. The end-points obtained are very close to those obtained with a glass-calomel system.     

Phase Equilibria in the System NH4Al(SO4)2–H2SO4–H2O

Equilibrium solubility curves of the ammonium aluminium sulphate in aqueous solutions of sulphuric acid have been calculated using checked literature data and our own measurements. The concentration of sulphuric acid ranged from 0 to 23 mass%, temperature range between 20 and 60°C has been extrapolated up to 75°C by means of a thermodynamically based correlation method. The solubility correlation as well as the hydration analysis implied a possible destructuralization of solutions at higher acid concentrations. This revised version was published online in August 2006 with corrections to the Cover Date.     

Atomic Emission Spectrometric Determination of Antazoline,Hydralazine, Amiloride,Thiamine and Quinine Based on Formation of Ion Associates with Ammonium Reineckate.

Abstract

Ion-associate complexes of Antazoline HC1 (I), Hydralazine HC1 (II), Amiloride HC1 (III), Thiamine HC1 (IV) and Quinine sulphate (V) with ammonium reineckate were precipitated and their solubilities were studied as a function of pH, ionic strength and temperature. Saturated solutions of each ion-associate under the optimum precipitation conditions were prepared and the metal ion-content in the supernatent was determined. The solubility products were thus elucidated at different temperatures. A new accurate and precise method using direct coupled plasma-atomic emission spectrometry for the determination of the investigated drugs in pure solutions and in pharmaceutical preparations is described. The drugs can be determined by the present method in the ranges 0.3-3.0, 0.19-1.96, 0.3-3.0, 0.33-3.37 and 0.78-7.82 mg/25 ml solutions of I, II, III, IV and V, respectively.