Potential for chlorate interference in ion chromatographic determination of total nitrogen in natural waters following alkaline persulfate digestion.

Determination of total nitrogen in aqueous samples after thermal potassium peroxydisulfate (persulfate) digestion is a commonly used alternative to the tedious Kjeldahl procedure. When ion chromatography is used to quantify the nitrate formed during digestion, there is a potential for interference from a chlorate peak if the digested sample initially contained chloride in concentrations close to or greater than the concentration of nitrogen. It was determined that this interference can be avoided either by using chromatographic conditions which cleanly resolve the nitrate and chlorate peaks (e.g., the Dionex AG9-HG column) or by using digestion reagent concentrations chosen to maintain a high pH throughout the digestion. The second alternative is not a viable option for investigators using a single digestion for both total nitrogen (TN) and total phosphorus (TP) analysis.     

Study on the PTFE closed-vessel microwave digestion method in food elemental analysis

Summary A closed PTFE vessel microwave digestion method is described for the HNO₃/H₂O₂ digestion of food samples. 0.2–0.3 g of powdered samples are completely digested in 44 ml PTFE digestion vessels by 2 ml of 70% HNO₃ and 1 ml of 30% H₂O₂ within 2 min at 100% full power (500 W). After air-cooling for 10 min in a refrigerator at — 25°C the digestion solution is diluted to 25ml. The total elemental concentrations of Ca, Mg, Cu, Fe, Mn and Zn are determined by sequential ICP-AES. The accuracy of the procedure was tested by analysis of 3 SRMs. The results are in good agreement with certified values.

---

Untersuchung zum Mikrowellenaufschluß im geschlossenen PTFE-Gefäß für die Elementanalyse in Lebensmitteln

     

Determination of Ba, Cd, Cu, Pb and Zn in saliva by isotope dilution direct injection inductively coupled plasma mass spectrometry

Trace elements in small sample volumes of saliva were determined by coupling a high efficiency direct injection nebulizer to inductively coupled plasma mass spectrometry and employing quantification by isotope dilution. Aliquots of 0.4 ml of human saliva were mixed with 0.1 ml of concentrated nitric acid and diluted to 2 ml with water. Sample solutions were spiked with an isotopic solution enriched in 135Ba, 112Cd, 65Cu, 206Pb and 66Zn. The amount of each isotope added to the samples and the measurement procedure were adjusted to attain precise analytical results calculated from the isotope ratios 135Ba/138Ba, 112Cd/114Cd, 65Cu/63Cu, 206Pb/208Pb and 66Zn/68Zn. Data acquisition for Ba, Cu and Zn isotopes was performed for a single sample injection of 50 microl and in another sample injection the Cd and Pb isotopes were measured. Concentrations ranging from 5.0 to 16 microg l(-1) for Ba, from 0.50 to 1.1 microg l(-1) for Cd, from 6.0 to 50 microg l(-1) for Cu, from 0.8 to 18.8 microg l(-1) for Pb and from 46.0 to 230 microg l(-1) for Zn were found in saliva samples. Detection limits of 0.11, 0.03, 0.40, 0.05 and 0.59 microg l(-1) were determined for Ba, Cd, Cu, Pb and Zn, respectively. The concentrations found by isotope dilution were in agreement with those of the completely digested samples quantified by external calibration. The direct analysis of 30 samples per hour was attained with the proposed procedure, avoiding time-consuming digestion steps, contamination risks and matrix effects.     

Determination of total phosphorus and nitrogen in turbid waters by oxidation with alkaline potassium peroxodisulfate and low pressure microwave digestion, autoclave heating or the use of closed vessels in a hot water bath: comparison with Kjeldahl digestion

The evaluation of the use of alkaline peroxodisulfate digestion with low pressure microwave, autoclave or hot water bath heating for the determination of total phosphorus and nitrogen in turbid lake and river waters is described. The efficiency of these digestion procedures were compared to a Kjeldahl digestion procedure with sulphuric acid-potassium sulfate and copper sulfate. The final solution before digestion was 0.045 M in potassium peroxodisulfate and 0.04 M in sodium hydroxide. Procedures were evaluated by the analysis of suspensions of two reference materials, National Institute of Environmental Science, Japan, no. 3 Chlorella and no. 2 pond sediment and natural turbid waters. Best recoveries of phosphorus and nitrogen by microwave heating were obtained when solutions were digested at 95 °C for 40 min. Quantitative recoveries of phosphorus from Chlorella suspensions up to 1000 mg/l were obtained by all three heating procedures, but incomplete recoveries of nitrogen occurred above 20 mg N/l in the digested sample. Good recoveries of phosphorus and nitrogen from suspended sediment suspensions were obtained only from solutions containing <150 mg/l of suspended sediments. Recoveries of phosphorus from phosphorus compounds containing COP and CP bonds added to distilled water were quantitative (94-113%) except for polyphosphates (microwave, 34±8; autoclave, 114±6; water bath, 96±4) and aluminium phosphate (8-23%). Recoveries of nitrogen compounds containing CN bonds added to distilled water were quantitative (94-96%). The analysis of a range of natural turbid water samples by alkaline peroxodisulfate and microwave, autoclave and water bath heating gave similar total phosphorus and nitrogen results. All procedures using alkaline peroxodisulfate underestimate phosphorus concentrations at high suspended sediment concentrations (>150 mg/l) and are only suitable for the analysis of very turbid samples when the turbidity is due to organic matter (algal cells, plant detritus). Underestimation of nitrogen occurs when samples contain more than 20 mg N/l.     

Acid digestion of geological and environmental samples using open-vessel focused microwave digestion

The application of open vessel focused microwave acid digestion is described for the preparation of geological and environmental samples for analysis using inductively coupled plasma-mass spectrometry (ICP-MS). The method is compared to conventional closed-vessel high pressure methods which are limited in the use of HF to break down silicates. Open-vessel acid digestion more conveniently enables the use of HF to remove Si from geological and plant samples as volatile SiF4, as well as evaporation-to-dryness and sequential acid addition during the procedure. Rock reference materials (G-2 granite, MRG-1 gabbros, SY-2 syenite, JA-1 andesite, and JB-2 and SRM-688 basalts) and plant reference materials (BCR and IAEA lichens, peach leaves, apple leaves, Durham wheat flour, and pine needles) were digested with results comparable to conventional hotplate digestion. The microwave digestion method gave poor results for granitic samples containing refractory minerals, however fusion was the preferred method of preparation for these samples. Sample preparation time was reduced from several days, using conventional hotplate digestion method, to one hour per sample using our microwave method.     

Sequential injection system for on-line analysis of total nitrogen with UV-mineralization

An automatic method for the determination of total nitrogen in wastewater by sequential injection analysis and mineralization with UV radiation has been developed. The method is based on the mineralization of the samples with sodium persulphate in basic medium under UV radiation. Small volumes of sample and reagents are firstly aspirated into a single channel and then propelled by flow reversal to the UV reactor and then to the detector. The organic and inorganic nitrogen compounds are oxidized to nitrate that is then measured at 226 nm. The sequential injection procedure has been optimized and the factors affecting the efficiency of the oxidation have been studied with a number of test substances with different chemical structures and properties. Solutions in the concentration range 1-56 g l⁻¹ of nitrogen can be analyzed with the described procedure. The sample rate is of 30-40 samples h⁻¹. The LOD is 0.6 mg l⁻¹ N and the reproducibility is 1.8% (28 mg l⁻¹ N). Organic carbon in the form of glucose was added to a number of test solutions to study the potential interference of organic matter.The method was compared with the Kjeldahl digestion method by analyzing 15 wastewater samples with both methods. The nitrate and nitrite content of the non-oxidized samples were subtracted from the corresponding nitrogen content determined after photo-oxidation and the value compared with the Kjeldahl nitrogen content.     

A semi-automatic alkaline peroxodisulphate method for the routine determination of total dissolved nitrogen in sea water

Nydahl's method for the determination of dissolved organic nitrogen (DON) in distilled water has been modified for the determination of total dissolved nitrogen (TDN) in sea water. Samples (9 cm³) are digested batch-wise with alkaline potassium peroxodisulphate solution. An improved buffering system permits the automatic measurement of the nitrate formed, and allows the analysis of 50–80 samples per day. DON may be determined as the difference between TDN and the sum of inorganic nitrogen species. The standard deviation of TDN determinations is 0.7 μg N dm^-3 at about 15 μg TDN dm^-3. The method is applied to a range of samples including tanker ballast water, oil platform production water, and zooplankton.     

Determination of arsenic and antimony in milk by hydride generation atomic fluorescence spectrometry

A highly sensitive procedure has been developed for total arsenic and antimony determination in milk samples by hydride generation atomic fluorescence spectrometry after microwave-assisted sample digestion. The discrete introduction of 2 ml of digested sample in the automated continuous flow hydride generation system allows us to reduce drastically the sample and HCl consume and to determine several elements from a same sample digestion. The method provides detection limits of 0.006 and 0.003 ng ml⁻¹, a sensitivity of 2390 and 2840 fluorescence units per ng ml⁻¹ for As and Sb respectively, and average relative standard deviation of 2.3% for As and 4.8% for Sb. The analysis of cow milk samples, obtained from the Spanish market evidenced the presence of As at concentration levels from 3.4 to 11.6 ng g⁻¹ and Sb levels from 3.5 to 11.9 ng g⁻¹, thus in a proportion near to 1:1, which is in contrast with the 10:1 natural ratio between As and Sb and could evidence the effect of the introduction of new alloys and polymer materials in the industrial process of milk. The method was validated by the comparison of data found for commercial samples by using the proposed procedure and reference methods based on dry-ashing and AFS, and microwave-assisted digestion and inductively coupled plasma mass spectrometry determination.     

Neutral persulfate digestion at sub-boiling temperature in an oven for total dissolved phosphorus determination in natural waters

A simplified, easily performed persulfate digestion method has been developed to process a large number of water samples for routine determination of total dissolved phosphorus. A neutral potassium persulfate solution (5%, w/v, pH ∼6.5) is added to the samples (at 10 mg potassium persulfate per mL of sample), which are then digested at 90 °C in an oven for 16 h. This method does not require pH adjustment after digestion because neither an acid nor a base is added to the samples prior to digestion. The full color of phosphoantimonylmolybdenum blue from the digested samples develops within 8 min. Compared with the autoclave method, digestion at sub-boiling temperatures in an oven is safer, and a large number of samples can be heated overnight requiring no constant monitoring. The apparent molar absorptivity (?) of nine organic phosphorus compounds and two condensed inorganic phosphates ranged from 1.17 × 10⁴ to 1.82 × 10⁴ L mol⁻¹ cm⁻¹ in both distilled water and artificial seawater matrixes. The average recovery of these phosphorus compounds was 94 ± 11% for the DIW matrix and 90 ± 12% for the ASW matrix. No significant difference in molar absorptivity was observed between the undigested and digested phosphate, especially in the seawater matrix. It is, therefore, suggested that a phosphate solution be directly employed without digestion as the calibration standard for routine determination of total dissolved phosphorus. This method was used to study the spatial distribution of total dissolved phosphorus in the surface waters of Florida Bay.     

原子吸收光谱法测定茶叶中铅和镉时消解方法的优化

采用多种方法对同一种茶叶进行消解,用原子吸收光谱法测定不同方法消解的茶叶中有害微量元素铅和镉的含量并进行对比,探索了茶叶中微量元素铅和镉低损耗的最佳消解条件.实验结果表明,不同的消解方式对茶叶中微量元素的测定结果影响很大.测定茶叶中铅和镉元素时,采用硝酸-高氯酸加盖浸泡过夜方法较为理想.     

Determination of amitriptyline and nortriptyline in human plasma by quantitative thin-layer chromatography

A thin-layer chromatographic method for simultaneous determination of amitriptyline (AT) and nortriptyline (NT) in human plasma is described. Both substances are extracted from biological material by means of a single extraction. The extract is evaporated until dry and the residue quantitatively applied to a silica gel thin-layer plate. AT and NT are separated from interfering plasma components by chromatography. The spots are visualized by nitration, reduction and coupling with N-(1-naphtyl)ethylenediamine on the plate. The intensity of the azo-dyes formed can be measured densitometrically. Using 1 ml of plasma, the sensitivity limit was 0.5 ng/ml for both substances. About 10--15 plasma samples can be analysed per day. The method is applicable to pharmacokinetic studies after a single oral dose of 25 mg AT as hydrochloride in man.     

A clean up step of fat content previous to trace metal characterization in mussel tissues by inductively coupled plasma mass spectrometry

Inductively coupled plasma mass spectrometry analysis of trace and major elements of mussel tissues can be quickly and accurately analyzed after cleaning up the interfering fat content before the sample is digested in a microwave oven. Making use of experimental designs, the clean up procedure was achieved by the extraction of 1 g of freeze-dried tissue sample stirred with 5 ml of dichloromethane during five minutes. The microwave assisted digestion of the fat free samples was carried out with 0.2 g of tissue sample, 15 ml of 7.0% nitric acid with a power of 980 W during 18 min. The analytical method efficiency (accuracy and precision) was evaluated with a CRM: (NIST 2977, mussel tissue) and real mussel samples analyzed previously. The results confirmed the accuracy of the analysis by agreement with the previous results but the precision was significantly improved. The developed method allows operating routinely permitting to large numbers of samples to be quickly screened for trace metals.     

Simultaneous Determination of Total Nitrogen and Metal Elements in Tobaccos by High Performance Ion Chromatography

A simple method, developed primarily for simultaneous determination of total nitrogen and inorganic cations by high performance ion chromatographic (HPIC), was optimized for digestion of flue‐cured tobaccos, and compared with the traditional Kjeldahl method and atomic absorption spectrometry (AAS). Nitrogen determination by either Dumas method or Kjeldahl method is time‐consuming and tedious. Metal elements determination by either inductively coupled plasma‐mass spectrometry (ICP‐MS) or AAS may be more expensive and requires specialist equipment. The use of HPIC to simultaneous determine total nitrogen as ammonium ion and metal elements as inorganic cations after sample digestion significantly improves the speed of the analysis compared with the conventional methods. The cation‐exchange column and suppressed conductivity detector was used for determination of ammonium and inorganic cations in the presence of the elevated levels of sulfuric acid found in digested sample. The propsoed digestion method was accurate and precise, and required little investment. The determination of ammonium and inorganic cations was linear from 15 pg·L^?1 up to 25 ng·L^?1. The results obtained by the HPIC method were compared with those for the conventional methods approach for the determination of total nitrogen and metal elements. The application of the HPIC method is also demonstrated for a variety of other plant samples matrices.     

Direct extraction of alkylphenols, chlorophenols and bisphenol A from acid-digested sediment suspension for simultaneous gas chromatographic-mass spectrometric analysis

The direct extraction of alkylphenols, chlorophenols and bisphenol A from an acid-digested sediment suspension for GC-MS analysis was studied. The sediment was digested with acid while the hydrolyzed analytes were being extracted with dichloromethane. The conditions of the acid digestion and extraction were optimized in terms of time, acidity of digestion, and extracting solvent. It is possible to complete the extraction within 20 min with 5 ml of 0.1 M HCl digesting solution and three portions of 5 ml of dichloromethane. The recoveries of analytes were mostly around 90% with about 10% relative standard deviations. With this technique parallel treatment of large numbers of sediment samples is possible without any expensive special equipment or heating process. The analytical characteristics of this extraction technique were compared with Soxhlet extraction and the pressurized liquid extraction technique. The technique was examined and evaluated for real environmental sediment samples and certified reference material of natural matrix.     

Determination of silver in biological materials by high-frequency plasma-torch emission spectrometry

Nanogram amounts or silver in small samples of biological materials can be determined by high-frequency plasma-torch emission spectrometry. Samples are digested with perchloric and nitric acids, silver is collected with a bismuth iodide carrier, and the precipitate is decomposed with concentrated nitric acid before dilution. Bismuth shows an enhancing effect on the silver emission at 328.06 nm, and the sensitivity is further improved by elimination of moisture in the aerosol with a second condenser at -3 to -5°C. The detection limit is 0.5 ng per 0.2 ml of sample solution. Condensed milk and whole blood were analyzed satisfactorily.     

微波消解-电感耦合等离子体发射光谱测定铜精矿中的银

铜精矿试样利用HCl和HNO3混酸于微波消解仪中进行溶解,电感耦合等离子体发射光谱(ICP-OES)法测定铜精矿中的银含量。试验了不同比例消解体系的消解效果,研究了不同浓度铁、铜基体的影响,结果表明王水体系消解效果最佳,1 000mg/L以下的铁、铜或铁、铜的混合基体对银的测定没有影响,10%HCl体系作为测定酸度。该方法对银的线性范围为0.73~1 500g/t,标准物质测定值与标准值无显著性差异。该方法前处理试剂消耗少、速度快,分析浓度范围宽,可用于铜精矿中银的快速测定。     

An automated method for the determination of low-level kjeldahl nitrogen in water and waste water

An entirely automated system for low level Kjeldahl nitrogen determination in water samples is described. Samples are continuously digested at 300 °C with sulfuric acid and hydrogen peroxide to convert the organic nitrogen to ammonia, which is determined colorimetrically with sodium salicylate and sodium dichloroisocyanurate (as chlorine source). The method has a range of 10–500 μg Nl^-1 with good precision and accuracy.     

On-line microwave-assisted digestion of solid samples for their flame atomic spectrometric analysis

A new procedure has been developed for the on-line digestion of solids in a microwave oven. The direct injection in a water carrier flow of dispersions of solid samples in concentrated nitric acid, the merging of these slurries with 30% (v/v) H(2)O(2) and the microwave-assisted digestion in a Teflon coil of 100 cm permit a fast and quantitative extraction of Cu and Mn from different solid matrices, such as vegetables, powdered dietary products and sewage sludges. The development of an appropriate interphase, in which digested samples are cooled and degassified, previous to their introduction into the nebulizer of a flame atomic absorption spectrometer, makes possible the full automatization of the digestion and measurement steps of the elemental analysis of solids and it provides a sample frequency of 180 injections per hour. The developed procedure has also been applied for Pb and Zn determination in certified sewage sludge samples, with accurate results obtained for Pb but low results found for Zn.     

New approaches for the separation and determination of americium in soil samples using short column chromatography and alpha spectroscopy

This paper describes new approaches to digestion, accurate separation and determination of americium in soil samples by alpha spectrometry. The soil samples were obtained from surface and at a depth of 40?cm in a residential area. They were digested on a hot plate or in closed vessels heated in a microwave oven. The effect of decomposition methods on accuracy and reproducibility has been investigated. An extraction chromatography column is used to separate the americium from other actinide elements and interfering substances in the soil matrix. Prior to the determination of very low amounts of americium (100?ng?g^?1), electrodeposition at a current of 800?mA and a plating time of 150?min in the pH range of 2?C3 has been applied. The typical recovery of Am from the samples is 88?% when dissolution occurs in a microwave oven. This is higher than the typical recovery of 83?% that is observed when the samples are heated on a hot plate.     

Organic substances in potable water and in its precursor. III. The closed-loop stripping procedure compared with rapid liquid extraction.

An attempt is made to define the role of gas chromatography in the investigation of organic substances in water, which is important because the handling of water samples before gas chromatographic (GC) analysis depends entirely on the information expected from the subsequent separation, identification and quantification. Practical long-term experience with the previously published closed-loop stripping procedure (with intermediate adsorption on activated carbon) is described and further refinements are reported. A rapid and simple liquid extraction method is described, based on shaking 11 of water with a small volume (0.5-1 ml) of solvent and subsequent high-resolution GC analysis of the extract. Qualitative and semi-quantitative information at the parts per 10(12) level is easily obtained. Further studies of recovery rates under conditions where the volatility and polarity of extracted organic substances are varied are described for both methods. The suitability of both methods for the analysis of different types of water samples is discussed.