Effect of cationic surfactant on the formation of ferron complexes

In the spectrophotometric determination of aluminium and iron with ferron (7-iodo-8-quinolinol-5-sulphonic acid, H(2)L), the addition of cationic surfactants greatly improves the linearity of the calibration curve and widens the useful pH range. The effect of cetyltrimethylammonium chloride (CTMAC) on the stepwise stability constants (K(1),K(2) and K(3)) of the ferron complexes of aluminium and iron (ML(+), ML(-)(2) and ML(3-)(3)) and on the acid-dissociation constants (K(a1) and K(a2)) of ferron has been studied in connection with the role of the surfactant. CTMAC greatly increases the value of K(3) while exerting little effect on K(1) and K(2), thus rendering ML(3-)(3) the predominant species even at very low concentration of free L(2-). It also has some effect on the acid-dissociation constants of ferron, but sometimes it acts to decrease the free L(2-) concentration. At is therefore concluded that the improvements due to addition of surfactant should be attributed to the increased K(3) value. The presence of surfactant micelles is not essential, because the surfactant has a favourable effect when present at well below its critical micelle concentration, and because the continuous variations plots show a peak at a point corresponding to the composition M: L: Q (Q = cationic surfactant) = 1:3:3.     

金纳米粒子自球形向棒状的转变和生长的光化学法研究

在含有HAuCl₄和十六烷基三甲基氯化铵(CTMAC)的DMF-H₂O-丙酮介质中, 以CTMAC形成的胶束为模板, 丙酮为光敏剂, 光化学还原法制备了不同长径比的棒状金纳米粒子. 通过改变DMF∶H₂O (V/V)的比例来改变溶液的极性, 增加胶束聚集数, 实现了自球形胶束向棒状的转变, 从而得到以金纳米棒占优势的金胶体溶液. 研究了HAuCl₄和CTMAC的浓度以及照射时间对金纳米棒生长的影响, 在最佳实验条件下, 获得了直径在20～22 nm, 长为0.5～3 μm的金纳米棒, 讨论了光化学反应和金纳米粒子在形成的棒状胶束中的自组装生长机理.     

Highly selective and sensitized spectrophotometric determination of iron (III) following potentiometric study

A simple, selective and sensitized spectrophotometric method for determination of trace amounts of Fe3+ ion in tap and waste water solutions has been described. The spectrophotometric determination of Fe3+ ion using Ferron in the presence of N,N-Dodecytrimethylammonium bromide (DTAB) has been carried out. The Beer's law is obeyed over the concentration range of 0.05-2.6 microg mL(-1) of Fe3+ ion with the relative standard deviation (RSD %) <0.2% and the molar absorptivity of complexes in pH 3.5 is 3.8 x 10(3) L mol(-1) cm(-1). Potentiometric pH titration has been used for prediction of protonation constants of ferron, and evaluating its stoichiometry and respective stability constant with Fe3+ ion. As it is obvious the most likely species of ferron alone and its complexes are LH (log = 7.64), LH2 (logK = 10.52), LH3 (logK = 11.74) and ML2 (logbeta = 23.68), ML3 (logbeta = 23.68), ML3H (logbeta = 23.68), ML3H2 (logbta = 23.68) and ML(OH)2 (logbeta = 23.68) respectively.     

Separation,preconcentration and speciation of chromium by solid phase extraction on immobilised ferron

A sensitive and simple method for determination of chromium species after separation and preconcentration by solid phase extraction (SPE) has been developed. For the determination of the total concentration of chromium in solution, Cr(VI) was efficiently reduced to Cr(III) by addition of hydroxylamine and Cr(III) was preconcentrated on a column of immobilised ferron on alumina. The adsorbed analyte was then eluted with 5?mL of hydrochloric acid and was determined by flame atomic absorption spectrometery. The speciation of chromium was affected by first passing the solution through an acidic alumina column which retained Cr(VI) and then Cr(III) was preconcentrated by immobilised ferron column and determined by FAAS. The concentration of Cr(VI) was determined from the difference of concentration of total chromium and Cr(III). The effect of pH, concentration of eluent, flow rate of sample and eluent solution, and foreign ions on the sorption of chromium (III) by immobilised ferron column was investigated. Under the optimised conditions the calibration curve was linear over the range of 2–400?µg?L^?1 for 1000?mL preconcentration volume. The detection limit was 0.32?µg?L^?1, the preconcentration factor was 400, and the relative standard deviation (%RSD) was 1.9% (at 10?µg?L^?1; n?=?7). The method was successfully applied to the determination of chromium species in water samples and total chromium in standard alloys.     

Spectrophotometric Studies on Ferron and Thorium (IV)-Ferron Chelate

The ionization constants of ferron (7-iodo-8-hydroxyquinoline-5-sulphonic acid) and the interaction between Th(IV) and ferron have been studied spectrophotometrically at 25° and ionic strength of 0.1. The ionization constants were found to be pK₁=2.41±0.01, pK₂=7.10±0.01. The Th(IV)-ferron chelate in aqueous solution of pH 5.0 exhibited a characteristic absorption maximum at 365 mμ. The composition of Th(IV)-ferron chelate was 1:4 mole ratio of Th(IV) ion and ferron, and the stability constant (log K_g) was 26.22±0.16.     

Complex formation of gallium(III) with 8-hydroxy-7-iodoquinoline-5-sulphonic acid (ferron)

The complex formation of gallium(III) with 8-hydroxy-7-iodoquinoline-5-sulphonic acid (ferron) (L) was studied by potentiometry; and the dissociation constants of the ligand were redetermined. A new computer program made it possible to make allowance for a considerable number of equilibria. In the pH range 2–10, the main species were as follows (the logarithm of the absolute stability constants at 25.0 ±0.1° for ionic strength 0.1 M are given in parentheses): GaHL (11.3), GaL (14.7), Ga(OH)₂L (32.3), GaL₂ (23.9), GaOHL₂ (31.0) and GaL₃ (29.6). For 1:1, 1:2 and 1:3 mixtures of metal with ferron, the mole fractions of the various complexes as a function of pH were calculated; the effect of pH on the conditional constants of the species GaL, GaL₂ and GaL₃ was also established.     

Electrode Kinetics and Activation Energy of Uranyl-Ferron Chelate by Polarography

The uranyl chelate of ferron was investigated polarographically over the pH range 1.98–10.00 and ligand concentration 0.005–0.060.M. A reversible and diffusion controlled reduction wave was obtained, however, when ferron concentration below 0.02M and pH below 5.0, it became irreversible. The chelate species identified were UO₂(HA) ₂ at pH range 2.5–7.1 and UO₂(OH) (A) ₂^?3 over pH 7.1. The electron-transfer coefficient, rate constant, diffusion coefficient and activation energy of the reduction process were determined.     

Simultaneous spectrophotometric determination of uranium and thorium by flow injection analysis using selective masking.

A flow injection system for the simultaneous determination of uranium and thorium has been developed by using selective masking and a spectrophotometric detector with two flow cells aligned with the same optical path. The injected sample solution was first mixed with a reagent solution containing Chromazurol S (CAS) and cetyltrimethylammonium chloride (CTMAC), and the total absorbance of uranium- and thorium-CAS complexes was measured in the first flow cell at 620 nm. The sample stream was then mixed with an EDTA solution in order to convert the thorium-CAS complex to a thorium-EDTA complex, and the absorbance of the uranium-CAS complex was measured in the second flow cell. The detection limits were 10 microg dm(-3) for uranium and 7 microg dm(-3) for thorium. The calibration graphs were linear (r < 0.9998) at least over the ranges of 0.1 to 10 mg dm(-3) for uranium and 0.08 to 8 mg dm(-3) for thorium. The RSDs were less than 1.5% (n = 3) in the calibration range. Uranium and thorium of up to the 6-fold concentration to each other could be determined in admixtures with relative errors of less than 3.3%. The sample throughput was 24 per hour. The proposed system was successfully applied to the analysis of a uranium-thorium ore mock solution by coupling with anion-exchange in a magnesium nitrate medium to eliminate interference from coexisting elements.     

Adsorptive Square‐Wave Voltammetry for the Analysis and Speciation of Complexes of Cd(II)‐Ferron

The theory of adsorptive stripping square‐wave voltammetry (SWV) for relatively low ligand concentrations is employed to determine the reduction mechanism of Cd(II)‐ferron complexes accumulated on a static mercury drop electrode at different pH values. The electrochemical behavior of ferron molecules indicated that the adsorptive concentration of Cd(II) is possible in solutions with 3.5<pH<11, providing a wide pH range where the interference of other ligands present in real samples would be not so critical. Cyclic voltammetry experiments were also performed for the purpose of comparison. Fitting between experimental and theoretical square‐wave voltammograms shows that the prevailing species at the reaction layer coincide with the equilibrium bulk distribution. The simulation procedure indicated that the electrochemical rate constants of Cd(II)‐ferron complexes varied from (6±1) s^?1 to (0.17±0.01) s^?1 for solutions analyzed at pH 3.9 and 10.8, respectively. Changes at the surface concentrations are discussed considering the ligand to complex ratios at the electrode surface and at the solution bulk. From this analysis it is possible to infer that the oxidized metal species are produced in the electrolytic solution instead of on the electrode surface.     

Extraction and spectrophotometric determination of vanadium(V) with ferron

Various metal complexes of 7-iodo-8-hydroxyquinoline-5-sulphonic acid (ferron) were found to be selectively extracted into immiscible alcohols. Vanadium(V) is almost completely extracted into n-butanol in a single extraction from solutions which are 0.05 M in sulphuric acid. A sensitive and selective spectrophotometric method can be based on this extraction. Beer's law is obeyed up to 15.3 μg of vanadium per ml; the sensitivity of the color reaction is 0.011 μg of vanadium per cm² at 430 mμ. The interference of iron(III) can be eliminated by adding excess pyrophosphate. The extracted species appears to contain vanadium, ferron and n-butanol in the ratio 1:2:4.     

Oxygen atom transfer reactions from dioxygen to phosphines via a bridging sulfur dioxide in a trinuclear cluster complex of rhenium, [(Ph(3)P)(2)N][Re(3)(mu(3)-S)(mu-S)(2)(mu-SO(2))Cl(6)(PMe(2)Ph)(3)

A trinuclear rhenium sulfide cluster complex, [(Ph(3)P)(2)N][Re(3)(mu(3)-S)(mu-S)(3)Cl(6)(PMe(2)Ph)(3)], synthesized from Re(3)S(7)Cl(7), dimethylphenylphosphine, and [(Ph(3)P)(2)N]Cl is readily converted to a bridging SO(2) complex, [(Ph(3)P)(2)N][Re(3)(mu(3)-S)(mu-S)(2)(mu-SO(2))Cl(6)(PMe(2)Ph)(3)], by reaction with O(2). The oxygen atoms on the SO(2) ligand react with phosphines or phosphites to form phosphine oxides or phosphates, and the original cluster complex is recovered. The reaction course has been monitored by (31)P NMR as well as by UV-vis spectroscopy. The catalytic oxygenation of PMePh(2) in the presence of the SO(2) complex shows that turnovers are 8 per hour at 23 degrees C in CDCl(3). The X-ray structures of the cluster complexes are described.     

Hexaruthenium carbonyl cluster complexes with basal edge-bridged square pyramidal metallic skeleton: efficient synthesis of 2-imidopyridine derivatives and determination of their reactive sites in carbonyl substitution reactions

The reactions of [Ru(3)(CO)(12)] with half equivalent of 2-amino-6-methylpyridine (H(2)ampy) or 2-aminopyridine (H(2)apy) in refluxing xylene give the hexanuclear products [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-L)(mu-CO)(2)(CO)(14)] (L = ampy, 1; apy, 2). These reactions represent the first high-yield syntheses of hexanuclear complexes with a basal edge-bridged square pyramidal metallic skeleton. Five metal atoms of these complexes are bridged by the N-donor ligand in such a way that the edge-bridging metal atom is attached to the pyridine nitrogen, while the basal atoms of the square pyramid are capped by an imido fragment that arises from the activation of both N-H bonds of the NH(2) group. The reactive sites of these complexes in CO substitution reactions have been determined by studying the reactivity of 1 with triphenylphosphine. Two kinetically controlled monosubstitutions take place on the edge-bridging metal atom in positions cis to the pyridine nitrogen, leading to a mixture of two isomers of formula [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(13)(PPh(3))] (3 and 4). On heating at 80 degrees C, these monosubstituted isomers are transformed, via a dissociative pathway, into the product of thermodynamic control (5), which has the PPh(3) ligand on the apical Ru atom. The di- and trisubstituted derivatives [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(12)(PPh(3))(2)] (6) and [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(11)(PPh(3))(3)] (7) are stepwise formed from 3-5 and PPh(3). Compound 6 has the PPh(3) ligands on the edge-bridging and apical Ru atoms, and compound 7 has an additional PPh(3) ligand on an unbridged basal Ru atom. The compound [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(12)(mu-dppm)] (8), in which a basal and the apical Ru atoms are spanned by the dppm ligand, has been isolated from the reaction of 1 with bis(diphenylphosphino)methane.     

Indirect Voltammetric Determination of Iron at Parts-Per-Million Levels Using Either Ferron or BPDS

Abstract

The electrochemical behavior of ferron and BPDS (bathophenanthrolinedisulfonic acid) in 0.5 M HAc/NaAc at pH 4.7 is studied by cyclic voltammetry at a glassy carbon electrode. Ferron shows a very sharp oxidation peak at + 0.74 V vs SCE while BPDS shows a sharp reduction peak at - 1.03 V. The heights of the peaks are shown to be inversely proportional to the iron (III) and iron (II) concentration of the solution, respectively. Linear calibration plots are obtained between 5 and 60 ppm of iron (III) for ferron and 0 to 60 ppm of iron (II) for BPDS using, initially, 4.00 mM solution of each reagent. A simple and fast procedure was developed for the analysis of iron content in pharmaceutical samples. The results are comparable with those found by spectrophotometry.     

Remarkable aspects of unsaturation in trinuclear metal carbonyl clusters: the triiron species Fe3(CO)n (n = 12, 11, 10, 9)

The trinuclear iron carbonyls Fe(3)(CO)(n) (n = 12, 11, 10, 9) have been studied by density functional theory using the B3LYP and BP86 functionals. The experimentally known C(2)(v) isomer of Fe(3)(CO)(12), namely Fe(3)(CO)(10)(mu-CO)(2), is found to be the global minimum below the unbridged D(3)(h) isomer analogous to the known structures for Ru(3)(CO)(12) and Os(3)(CO)(12). The lowest-energy isomer found for Fe(3)(CO)(11) is Fe(3)(CO)(9)(mu(3)-CO)(2) with iron-iron distances in the Fe(3) triangle, suggesting the one double bond (2.460 A by B3LYP and 2.450 A by BP86) and two single bonds (2.623 A by B3LYP and 2.604 A by BP86) required to give each Fe atom the favored 18-electron configuration. Two different higher-energy dibridged structures Fe(3)(CO)(9)(mu(2)-CO)(2) are also found for Fe(3)(CO)(11). The lowest-energy isomer found for Fe(3)(CO)(10) is Fe(3)(CO)(9)(mu(3)-CO) with equivalent iron-iron distances in the Fe(3) ring (2.47 A by B3LYP or BP86). The lowest-energy isomer found for Fe(3)(CO)(9) is Fe(3)(CO)(6)(mu-CO)(3) with distances in the Fe(3) triangle possibly suggesting one single bond (2.618 A by B3LYP and 2.601 A by BP86), one weak double bond (2.491 A by B3LYP and 2.473 A by BP86), and one weak triple bond (2.368 A by B3LYP and 2.343 A by BP86). A higher-lying isomer of Fe(3)(CO)(9), i.e., Fe(3)(CO)(8)(mu-CO), at approximately 21 kcal/mol above the global minimum, has iron-iron distances strongly suggesting two single bonds (2.6 to 2.7 A) and one quadruple bond (2.068 A by B3LYP and 2.103 A by BP86). Wiberg Bond Indices are also helpful in evaluating the iron-iron bond orders.     

Fourier transform infrared matrix and density functional theory study of the vibrational spectrum of the linear MgC3(-) anion

The linear MgC(3)(-) anion has been identified in the products from the dual Nd:YAG laser ablation of carbon and magnesium rods trapped in solid Ar at ～12 K. Measurements of (13)C isotopic shifts confirm the identification of the ν(1)(σ) vibrational fundamental at 1797.5 cm(-1). A second fundamental ν(2)(σ) has been tentatively identified at 1190.1 cm(-1). The results are in good agreement with the predictions of density functional theory calculations using the B3LYP functional with the 6-311+G(d) basis set. This is the first optical detection of the linear isomer of MgC(3)(-).     

Sol–gel immobilized room-temperature phosphorescent metal-chelate as luminescent oxygen sensing material

The chelate formed by 8-hydroxy-7-iodo-5-quinolinesulfonic acid (ferron) with aluminium exhibits strong room-temperature phosphorescence (RTP) when retained on a solid support. In a previous paper we have found that sol–gel technology is a very useful approach for developing RTP optical sensors as a new way to immobilize lumiphors. Sol–gel active phases proved to exhibit a high physical rigidity that enhanced relative RTP intensities and triplet lifetimes of the immobilized probe. In this paper we present an optical sensing phase prepared using the Al–ferron chelate which displays RTP entrapped in a sol–gel glass matrix for the determination of very low levels of oxygen both dissolved in water and organic solvents and in gaseous media. The sol–gel sensing material has proved to be chemically stable for at least 6 months under ambient storage conditions. Besides a high reproducibility in the formation of the sensing materials and no leaching or bleaching of the trapped reagent (neither in the gas phase nor in water or organic solvents) was observed. Oxygen was determined by continuous flow and flow injection methods using both intensity and triplet lifetime measurements. Both methods provided a fast response, good reproducibility and detection limits of 0.0005% (v/v) in the gas phase and <0.01 mg l⁻¹ for dissolved oxygen. An exhaustive study of the effect of some possible interferents present in the gas phase or in solution demonstrated the high specificity of this phosphorescent probe. This highly sensitive oxygen probe has been successfully applied to dissolved oxygen determinations in river and tap waters and its coupling to fiber optics for RTP in-situ monitoring or remote sensing of oxygen has been evaluated.     

Cd(2+) Complexation with P(CH(2)OH)(3), OP(CH(2)OH)(3), and (HOCH(2))(2)PO(2)(-): Coordination in Solution and Coordination Polymers

The coordination of Cd(2+) with P(CH(2)OH)(3) (THP) in methanol was followed by (31)P and (111)Cd NMR techniques. A cadmium-to-phosphine coordination ratio of 1:3 has been established, and effective kinetic parameters have been calculated. Air oxidation of THP in the presence of CdCl(2) at room temperature produces coordination polymer (3)(∞)[Cd(3)Cl(6)(OP(CH(2)OH)(3))(2)] (1). The same oxidation reaction at 70 °C gives another coordination polymer, (∞)[CdCl(2)(OP(CH(2)OH)(3))] (2). Complexes 1 and 2 are the first structurally characterized complexes featuring OP(CH(2)OH)(3) as a ligand that acts as a linker between Cd atoms. The addition of NaBPh(4) to the reaction mixture gives coordination polymer (∞)[Na(2)CdCl(2)(O(2)P(CH(2)OH)(2))(2)(H(2)O)(3)] (3) with (HOCH(2))(2)PO(2)(-) as the ligand. Coordination polymers 1-3 have been characterized by X-ray analysis, elemental analysis, and IR spectroscopy.     

Use of a bismuth ion-selective electrode for investigation of bismuth complexes of citric and malic acids

A bismuth ion-selective electrode has been used to determine the nature and stability of the complexes formed by bismuth with citric acid and malic acid, by measurement of the response of the electrode to different total bismuth concentrations at various combinations of pH and total ligand concentration. The values found were beta(2) = 3 x 10(13) for Bi(Cit)(2)(3-) and beta(3) = 8 x 10(9) for Bi(Mal)(2)(3-).     

Spectrophotometric determination of uranium(VI) with 7-iodo-8-hydroxyquinoline-5-sulfonic acid (ferron)

A new method is introduced to estimate uranium(VI) spectrophotometrically by extraction of its ferron (7-iodo-8-hydroxyquinoline-5-sulfonic acid) complex with 1% tridodecylamine in chloroform at pH 4.5. The optimum absorption wavelength is 380 nm. The stoichiometry of the uranium-ferron complex as indicated by a mole ratio plot is 1:2 and its dissociation constant is 3.24·10⁻⁹. The effects of various parameters on the absorption are studied. This method has a sensitivity of 0.028 ppm on Sandell's scale. Interferences are described.     

Synthesis of the hydroxide cluster [Al13(μ3-OH)6(μ-OH)18(H2O)24]15+ from an aqueous solution

A scalable synthesis of the "flat" tridecameric inorganic cluster [Al(13)(μ(3)-OH)(6)(μ-OH)(18)(H(2)O)(24)](15+) has been realized by treating an aqueous aluminum nitrate solution with a zinc-metal powder at room temperature. Single crystals and polycrystalline samples are readily obtained in yields exceeding 55% relative to the starting reagent Al(NO(3))(3). Products have been characterized by X-ray diffraction and solid-state (27)Al MAS and MQMAS NMR.