Parameters influencing transport across conducting electroactive polymer membranes

The parameters which influence electrochemically facilitated transport of electroinactive ions across conducting electroactive polymer membranes have been investigated. The design of membranes and the materials used as well as transport cells and systems have been addressed to improve selectivity and flux. Polypyrrole-para-toluenesulfonate (PPy-pTS) was compared with the copolymer of pyrrole with 3-carboxy-4-methylpyrrole (PPy/PCMP-pTS) and their different chemistries resulted in different membrane selectivities for ions. Platinum mesh was found to be the most suitable auxiliary electrode material and its placement in the cell chamber(s) facilitated ion incorporation/expulsion at the membrane working electrode. This enhanced the flux of ion transport. The flux can also further enhanced by narrowing the distance between the membrane working electrode and the platinum mesh auxiliary electrode(s), and/or by stirring to improve the hydrodynamics. An alternative cell design, namely a dual membrane flow through cell, also proved to be more efficient for ion transport. Good connection geometry to the membrane as well as the application of a square wave pulsed potential waveform to the membrane was found to be essential for achieving high and sustainable flux in ion transport.     

Tetrakis(4-N,N-dimethylaminobenzene)porphyrinato]manganese(III) acetate as a novel carrier for a selective iodide PVC membrane electrode.

[5,10,15,20-Tetrakis(4-N,N-dimethylaminobenzene)porphyrinato]Mn(III) acetate (MnTDPAc) was applied as an ionophore for an iodide-selective PVC membrane electrode. The influences of the membrane composition, pH of the test solution and foreign ions on the electrode performance were investigated. The sensor exhibited not only excellent selectivity to iodide ion compared to Cl- and lipophilic anions such as ClO4- and salicylate, but also a Nernstian response with a slope of -59.4 +/- 1.2 mV per decade for iodide ions over a wide concentration range from 1.0 x 10(-2) to 7.5 x 10(-6) M at 25 degrees C. The potentiometric response was independent of the pH of the solution in the pH range of 2 - 8. The electrode could be used for at least 2 months without any considerable divergence in the potential. Good selectivity for iodide ion, a very short response time, simple preparation and relatively long-term stability were the silent characteristics of this electrode. It was successfully used as an indicator electrode in the potentiometric titration of iodide ions, and also in the determination of iodide from seawater samples and drug formulations.     

Development of highly sensitive cadmium iondashselective electrodes by titration method and its application to cadmium ion determination in industrial waste water

Characteristics of cadmium iondashselective electrode made cadmium sulphide (CdS)-silver sulphide (Ag(2)S) mixture were studied. CdS-Ag(2)S mixtures were obtained by gas/solid-phase reaction between silver-cadmium mixed powder and hydrogen sulphide gas (dry method) and by ionic reaction between cadmium-silver mixed ions and sulphide ion (wet method). As a result, it was found that the CdS-Ag(2)S mixture had to be made in the condition of excess existence of sulfur and had better regulate the excess sulfur quantity minimum, for the CdS-Ag(2)S pressed membrane gave a good Nernstian response against the cadmium ion concentration change. As the best way, CdS-Ag(2)S mixture was obtained by adding sulphide ion solution to 5 mol% cadmium ion and 95 mol% silver ion mixed solution while measuring silver sulphide (Ag(2)S) electrode potential as an indicator electrode. According to the reaction was stopped when the potential variation from the initial potential in the sulphide ion solution reached at 87-116 mV which the sulphide ion concentration became 10(-3) - 10(-4) of the initial concentration, the cadmium ion membrane pressed diameter of 8 mm and thickness of 2 mm showed a Nernstian response from 10(-8) to 10(-1) M of cadmium ion concentration. Furthermore, aiming to its application for industrial waste water, masking buffer for interfering metal ions such as lead ion (Pb(2+)) and copper ion (Cu(2+)), which were possibly coexisted and to adjust total ionic strength and pH of sample was developed. The present Cd(2+) iondashselective electrode was applied to the determination of Cd(2+) in the industrial waste water. The good regression line with correlation factor of 0.984 was obtained compared with the conventional atomic absorption spectroscopy.     

Voltammetric Properties of All‐solid State Ion‐selective Electrodes with Multiwalled Carbon Nanotubes‐poly(3‐octylthiophene‐2,5‐diyl) Nanocomposite Transducer

Voltammetric response of an all‐solid‐state ion‐selective electrode was studied on example of potassium‐selective sensor with poly(vinyl chloride) based membrane and nanocomposite transducer containing poly(3‐octylthiophene‐2,5‐diyl) and multiwalled carbon nanotubes. Factors limiting the rate of the electrochemical process and the response were discussed. The challenge in voltammetric applications of ion‐selective electrodes is thickness of the plastic membrane. It was found that although a relatively thick ion‐selective membrane was applied, as typically used in potentiometric studies, the position of the reduction peak, corresponding to potassium ions incorporation, was dependent on ions concentration in a Nernstian manner. This opens possibility of deviation from the paradigm of ultrathin membranes in voltammetric applications, thus potentially extending the sensors lifetime. The high resistance of the membrane did not affect the voltammetric characteristics, because the resistance was independent of ions concentration in solution. On the other hand, high resistance results in charge trapping effect in the solid contact material, leading to advantageous retention of the oxidized‐conducting state of the solid contact, independently of the applied electrode potential.     

Advantages of Amperometric Readout Mode of Ion‐selective Electrodes under Potentiostatic Conditions

Amperometric responses of all‐solid‐state ion‐selective electrodes, recorded under potentiostatic conditions, were studied on example of potassium‐selective sensors with polypyrrole solid contact, at potential corresponding to reduction of the solid contact material and accompanying transfer of potassium ions across the membrane. Selective and stable in time linear dependences of current vs. logarithm of analyte concentration were recorded, resulting from high membrane resistance and changing membrane potential. The influence of experimental parameters as applied potential or thickness of the membrane was discussed. Advantages of the amperometric mode compared to potentiometric one relate to possibility of tailoring analytical parameters (sensitivity, magnitude of the signal) as well as over one order of magnitude decrease of the detection limit. The latter effect is achieved due to externally forced incorporation of potassium ions from the solution to the membrane, compensating their spontaneous release to the sample solution. A method of experimental setup simplification was proposed, with application of two‐electrode system, which can be used in the absence of external polarization source. The required driving force for the current flow was assured by spontaneous oxidation process occurring at the second electrode, coupled with reduction of the solid contact material of the ion‐selective electrode. In this case also stable in time calibration plots can be recorded.     

Polycation-sensitive membrane electrode for determination of heparin based on controlled release of protamine

A polycation-selective polymeric membrane electrode using dinonylnaphthalene sulfonate as an ion exchanger has been developed as a protamine controlled-release system for potentiometric detection of heparin. The incorporation of tetradodecylammonium tetrakis(4-chlorophenyl)borate as a lipophilic salt in the membrane dramatically improves the sensor's selectivity towards protamine over sodium ions via influencing the activity coefficient of protamine in the membrane, and a stable potential baseline can be obtained in the presence of an electrolyte background. The electrostatic binding interaction between heparin and protamine decreases the concentration of free protamine released at the sample-membrane interface and facilitates the stripping of protamine out of the membrane surface via the ion-exchange process with sodium ions, thus decreasing the membrane potential. Under optimal conditions, the proposed polymeric membrane electrode exhibits a linear relationship between the initial slope of the potential change and the heparin concentration in the range of 0.025-1.25 U mL(-1) with an improved detection limit of 0.01 U mL(-1).     

Diffusion-layer model for copper solid-state chalcocite membrane electrode; sensitivity to copper(II) ions

The diffusion-layer model for the chalcocite (Cu(2)S) membrane electrode is discussed. It is equivalent to a simpler model based on exchange reactions at the electrode surface. The chalcocite is sensitive to copper(I) and copper(II) ions and the theoretically predicted response is in good agreement with experimental data. The membrane is a conductor, but this does not significantly affect its function as an ion detector. The limitation of the electrode is the membrane solubility as shown when Cu(II) ions in contrast to copper(I) ions are strongly complexed.     

Silver(I) ion-selective membrane based on Schiff base-p-tert-butylcalix[4]arene

A PVC membrane electrode for silver(I) ion based on Schiff base-p-tert-butylcalix[4]arene is reported. The electrode works well over a wide range of concentration (1.0 x 10(-5)-1.0 x 10(-1) mol dm-3) with a Nernstian slope of 59.7 mV per decade. The electrode shows a fast response time of 20 s and operates in the pH range 1.0-5.6. The sensor can be used for more than 6 months without any divergence in the potential. The selectivity of the electrode was studied and it was found that the electrode exhibits good selectivity for silver ion over some alkali, alkaline earth and transition metal ions. The silver ion-selective electrode was used as an indicator electrode for the potentiometric titration of silver ion in solution using a standard solution of sodium chloride; a sharp potential change occurs at the end-point. The applicability of the sensor to silver(I) ion measurement in water samples spiked with silver nitrate is illustrated.     

Synthesis and characterisation of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) Zr(IV) monothiophosphate composite cation exchanger: analytical application as lead ion selective membrane electrode

A Pb²⁺ ion selective membrane electrode based on poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) Zr(IV) monothiophosphate composite cation exchange material was fabricated using solution casting method. The effect of membrane composition on the proton exchange capacity was investigated by using varying amounts of electroactive material. The membrane with 250 mg of electroactive material and 10 µL of plasticiser exhibited higher proton conductivity. The optimised membrane composition was used for the fabrication of ion selective membrane electrode which exhibited typical Nernstian response towards Pb²⁺ ions in the concentration range 20.70 gL^?1–20.7 µgL^?1 (1 × 10^–1–1 × 10^–7 mol L^?1) with a sub-Nernstian slope of 27.429 mV per decade change in Pb²⁺ ion concentration. The response time of the electrode under study for Pb²⁺ ions was found to be 11 s and the electrode can be used for 120 days without any considerable divergence in response potential. It can also be successfully used in the pH range from 3.0 to 6.5. It was found selective for Pb²⁺ ions in the presence of various monovalent, divalent and trivalent interfering metal ions. It was also employed as an indicator electrode in the potentiometric titration of Pb²⁺ ions using ethylenediaminetetraacetic acid, disodium salt, as a titrant.     

The Synthesis of Styrene/4'-vinyl-benzo-24-crown-8 Copolymer and Its Use in Potassium-Ion Selective Electrodes

A synthetic procedure has been developed for the preparation of styrene/4'-vinyl-benzo-24-crown-8 copolymer (SPV-B24C8). The resulting copolymer was used as a membrane carrier to construct a K+ ion-selective electrode. The electrode exhibits a Nernstian response for K+ ions over a wide concentration range. The nature of the plasticizer, the additive, the concentration of internal solutions in the electrodes and the composition of the membrane were investigated. The performance of the electrode in terms of electrode reproducibility, response stability and regeneration was also studied. The selectivity coefficients of the electrode for potential interferents including alkali, alkaline earth, some transition and heavy metal ions were found to be in the order of 10-3 or less. The electrode was successfully used for the determination of potassium ion in blood serum.     

A New Highly Selective Neodymium(III) Polyvinylchloride Membrane Electrode Based on 4-Hydroxypyrrolidine-2-Carboxylic Acid as an Active Material

The present paper describes the fabrication of a new polyvinylchloride (PVC) membrane electrode for the determination of Nd(III) ion based on 4-hydroxypyrrolidine-2-carboxylic acid (LHP) as an active material along with sodium tetraphenyl borate (NaTPB) as an anionic additive and acetophenone (AP) as solvent mediator. The optimum composition (%, w/w) of the best performing membrane contained 66 AP, 30 PVC, 2 NaTPB and 3 LHP. The basic analytical parameters of this electrode such as slope characteristics, detection limit, response time, selectivity and pH effect were assessed. The electrode displayed a Nernstian response in terms of slope (20.5 ± 0.4 mV per decade) and response time (~8 ± 1 s) over a wide neodymium ion concentration range of 10^–6 to 10^–2 M with a detection limit of 7.5 × 10^?7 M. The potentiometric response of the electrode was constant in the pH range of 3.2?8.9. According to the selectivity coefficients determined by the matched potential method, the interference of many common alkaline, alkaline earth, transition, heavy metals and specially lanthanide ions in determination of Nd(III) ion was very low. The proposed electrode has been successfully used as an indicator electrode in the potentiometric titration of Nd(III) ion with EDTA and applied for determination of Nd(III) ion in mixtures of different ions.     

The chalcocite copper membrane electrode

The membrane electrode based on a synthetic chalcocite (Cu(2)S) single crystal responds primarily to the activity of copper(I) ions in solution. The experimental selectivity coefficient with respect to copper(II) ions is in good agreement with the value calculated on the basis of solubility products of both sulphides. The electrode has been calibrated with metal-ion buffers containing a strongly complexing ligand. TETREN, and can be used as an indicator in titrations of copper with EDTA and TETREN. Comparison of an experimental titration curve with one calculated with the aid of the program HALTAFALL showed good agreement in the case of TETREN, but there were discrepancies for the EDTA titration, which are attributed to the presence and complexation of copper(I) ions. The electrode has also been applied in metal titrations with Cu(2+) as indicator ion, though the potential changes observed were smaller than predicted. All titrations showed errors less than 1%.     

Preparation of PbS Nanoparticles by Phase-Transfer Method and Application to Pb2+-Selective Electrode Based on PVC Membrane

Abstract

A novel approach to prepare homogeneous PbS nanoparticles by phase-transfer method was developed. The preparatory conditions were studied in detail, and the nanoparticles were characterized by transmission electron microscopy (TEM) and UV-vis spectroscopy. Then a novel lead ion-selective electrode of polyvinyl chloride (PVC) membrane based on these lead sulfide nanoparticles was prepared, and the optimum ratio of components in the membrane was determined. The results indicated that the sensor exhibited a wide concentration range of 1.0 × 10^?5 to 1.0 × 10^?2 mol·L^?1. The response time of the electrode was about 10 s, and the optimal pH in which the electrode could be used was from 3.0 to 7.0. Selectivity coefficients indicated that the electrode was selective to the primary ion over the interfering ion. The electrode can be used for at least 3 months without any divergence in potential. It was successfully applied to directly determine lead ions in solution and used as an indicator electrode in potentiometric titration of lead ions with EDTA.     

隔膜电解法测定离子水化数

在电解质溶液中,离子往往以水化离子形式存在,水化离子的形成影响溶液的静态和动态性质。离子水化数的测定有助于了解电解质溶液的结构,也为电解质溶液理论所需要。在已经提出的测定离子水化数的方法中,被引用得较多的几种经典方法和近代方法,或者由于方法本身的限制,或者在处理数据时所作的假设不尽合理,因此这些方法尚未满意地解决离子水化数的测定。迄今人们仍在不断寻求各种新的方法。本文将离子交换膜作为电解池的隔膜,电解时测量通过电解池的电量和阴极室或阳极室溶液体积的变化,并作必要的体     

Lead ion-selective membrane electrodes based on some recently synthesized 9,10-anthraquinone derivatives

Four different 9,10-anthraquinone derivatives were studied to characterize their abilities as lead ion carrier in PVC membrane electrodes. The electrode based on 1,8-dihydroxy-2,7-bis(prop-2′-enyl)-9,10-anthraquinone exhibits a Nernstian response for Pb²⁺ ions over a wide concentration range (2.0×10⁻³–2.0×10⁻⁶ M). The response time of the sensor is 30 s and the membrane can be used for more than four months without observing any deviation. The electrode revealed comparatively good selectivities with respect to alkali, alkaline earth and some transition and heavy metal ions. It was used as an indicator electrode in potentiometric titration of sulfate ions with a lead ion solution.     

A Novel Ion‐Selective Electrode for Determination of the Mercury(II) Ion Based on Schiff Base as a Carrier

A new poly(vinyl chloride) (PVC) membrane ion‐selective electrode based on bis‐salicyladehyde‐diaminjodipropylamine (BSDDA) as an ion carrier was successfully applied to the detection of Hg²⁺ ions. This electrode displayed good selectivity toward Hg²⁺ in comparison with other metal ions and exhibited a Nernstian slope of 30.5 ± 0.4 mV per decade of Hg²⁺ over a concentration range of 9.5 × 10^?7 to 6.4 × 10^?2 M of Hg²⁺ in the pH range 1.5 to 3.5. The detection limit was 7.0 ± 0.2 × 10^?7 M and response time was about 10 s to 25 s. The electrode can be used at least 2 months without apparent divergence in potential. In addition, the effects of experimental parameters such as membrane composition, nature and amounts of plasticizer and additive were investigated. The proposed electrode could be used as an indicator electrode in the detection of Hg²⁺ in samples.     

PVC membrane ion selective electrode for the determination of pentachlorophenol in water, wood and soil using tetrazolium pentachlorophenolate

A novel PVC membrane electrode selective for the determination of pentachlorophenolate (PCP) ion based on 2,3,5-triphenyl-2H-tetrazolium (TPT) pentachlorophenolate ion pair as an electroactive material is described. The electrode shows a linear response for PCP ion over the concentration range of 6x10(-5) to 1x10(-2) M with lower detection limit of 4x10(-5) M at 25 degrees C. The electrode posses a Nernstian slope of -55.0+/-1.0 mV/decade and a fast potential response of 45 s, which is almost constant over a pH range of 5.5-10.5. Selectivity coefficient data for some common ions show negligible interference, however, 2,4,6-trichlorophenolate and cetylpyridinium ions interfere. An average recovery of 96.2% with relative standard deviation of 2.3% has been achieved for the determination of 75.0 ppm PCP in wastewater samples. The determination of PCP in soil and wood samples gave results that compare favorably with those obtained by gas chromatography. The electrode has been utilized as an end point indicator electrode for the determination of PCP using potentiometric titration.     

Construction of a liquid-membrane type periodate ion-selective electrode and its application to the potentiometric titration of alpha-diols and alpha-amino-alcohols

The construction of a liquid-membrane type periodate ion-selective electrode and its application to the potentiometric titration of alpha-diols and alpha-amino-alcohols are described. The ion-pair of periodate anion with Capriquat (tri-n-octylmethylammonium chloride), is easily extracted into nitrobenzene, and this extract is employed as a liquid ion-exchange membrane. The calibration curve shows Nernstian response towards periodate ion over the concentration range from 10(-1)M to 10(-7)M with a slope of 60 mV/pIO(-)(4). Selectivity coefficients with respect to various ions were evaluated. The electrode potential was independent of pH in the range 2.5-7.5. Some alpha-diols and monoethanolamine were successfully titrated potentiometrically with the aid of the present electrode.     

Coated-wire copper(II)-selective electrode based on phenylglyoxal-α-monoxime ionophore

A copper(II) ion-selective electrode based on a recently synthesized 2-quinolyl-2-phenylglyoxal-2-oxime (phenylglyoxal-alpha-monoxime) has been developed. The PVC-based membrane containing phenylglyoxal-alpha-monoxime, dibutyl phthalate as plasticizer, and sodium tetraphenylborate as anion excluder and membrane modifier, was directly coated on the surface of a platinum-wire electrode. The response of the electrode was linear with a near-Nernstian slope of 28.2 mV decade(-1) within the Cu2+ ion concentration range 1x10(-6)-1x10(-1) mol x L(-1). The response time for the proposed electrode to achieve a 95% steady potential for Cu2+ concentrations ranging from 1x10(-1) to 1x10(-6) mol x L(-1) is between 10 and 50 s, and the electrode is suitable for use within the pH range of 3 to 6.5. The electrode has a detection limit of 5x10(-7) mol x L(-1) Cu2+ and its selectivity relative to several alkali, alkaline earth, transition, and heavy metal ions was good. The coated-wire electrode could be used for at least two months without a considerable alteration of its potential. Applications of the electrode for determination of copper in milk powder samples and as an indicator electrode for potentiometric titration of Cu2+ ion using EDTA are reported.     

Construction of a New Uranyl‐Selective Electrode Based on a New Ionophore: Comparison of the Effect Additive on Electrode Responses

A new plasticized PVC uranyl‐selective electrode based on a bis(2‐hydroxyacetophenone)ethylenediimine (BHAED) carrier by the direct coating of the membrane ingredients on the surface of a graphite disk electrode is reported. The electrode displayed high selectivity for uranyl ion toward a number of inorganic ions. The influence of the membrane compositions and pH, the effect of lipophilic cationic and anionic additives and plasticizer on the response properties of the electrode were investigated. The electrode exhibited a Nernstian slope of + 29.3 ± 1.2 for the uranyl ion concentration in the range of 5.0 × 10^?6 ?0.05 M with detection limits of approx. 2.0 μM. The potentiometric responses of the electrode are independent of pH over the range of 3.0–4.5 with satisfactory reproducibility. The sensor has response times of <5 s and can be used for at least 2 months without considerable divergence in potential.