Electrochemical polymerization of 1-(4-nitrophenyl)-2,5-di(2-thienyl)-1 H-pyrrole as a novel immobilization platform for microbial sensing

Two types of bacterial biosensor were constructed by immobilization of Gluconobacter oxydans and Pseudomonas fluorescens cells on graphite electrodes modified with the conducting polymer; poly(1-(4-nitrophenyl)-2,5-di(2-thienyl)-1 H-pyrrole) [SNS(NO₂)]. The measurement was based on the respiratory activity of cells estimated by the oxygen consumption at − 0.7 V due to the metabolic activity in the presence of substrate. As well as analytical characterization, the linear detection ranges, effects of electropolymerization time, pH and cell amount were examined by using glucose as the substrate. The linear relationships were observed in the range of 0.25–4.0 mM and 0.2–1.0 mM for G. oxydans and P. fluorescens based sensors, respectively.     

Syntheses and Optical Properties of Perfluorophenyl Containing Benzimidazole Derivatives: The Effect of Donor Units

Synthesis of two novel donor – acceptor – donor type monomers containing benzimidazole as the acceptor unit and thiophene and 3,4-ethylenedioxythiophene (EDOT) as the donor units were performed. 2-(Perfluorophenyl)-4,7-di(thiophen-2-yl)-1H-benzo[d]imidazole and 4,7-bis(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)-2-(perfluorophenyl)-1H-benzo[d]imidazole were synthesized successfully and polymerized electrochemically. The electrochemical and spectroelectrochemical studies of the polymers were studied. The effect of electron donating moieties on the optical properties of electrochemically polymerized polymers was investigated. Both polymers were p type dopable and possessed multi-chromic property. Optical studies demonstrated that the polymer based on EDOT unit (P2) resulted in lower band gap since EDOT is higher electron donating group than thiophene.     

Iron pentacarbonyl assisted photochemical route to 2,5- and 2,6-divinyl-substituted 1,4-benzoquinones from 1-ene-3-ynes

Photochemical reaction between the enynes, (Z)-1-methoxybut-1-ene-3-yne, 1 or isopropenyl acetylene, 2 with CO in presence of Fe(CO)₅ yields the 2,6- and 2,5-divinyl-substituted 1,4-benzoquinones: 2,6-bis{(Z)-2-methoxyvinyl}-1,4-benzoquinone (3, 42%), 2,5-bis{(Z)-2-methoxyvinyl}-1,4-benzoquinone (4, 31.5%), [{η²,η²:2,6-di(prop-1-en-2-yl)-1,4-benzoquinone}tricarbonyliron] (5, 45%), and {η²,η²:2,5-di(prop-1-en-2-yl)-1,4-benzoquinone}tricarbonyliron] (6, 65%).     

Cyclobutane-substituted diacetamido sulfides and 2,5-diacylthiophenes

A general and convenient route for the synthesis of 2,5-di[1-methyl-1-arylcyclobutane-3-yl]- thiophenes 4a–c and bis[1-methyl-1-arylcyclobutane-3-yl]-2-(2-oxyethtylamido)thiazole sulfides 7a–c is reported. The characterization of these compounds was obtained by elemental analyses, IR, ¹³C, and ¹H NMR techniques. © 2003 Wiley Periodicals, Inc. 15:26–31, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/.hc10207     

Synthesis, characterization and spectroscopic properties of novel periphery – functionalized unsymmetrical porphyrazines containing mixed dithienylpyrrolyl and dimethylamino groups

Following our previous report on a novel class of C₄ symmetric porphyrazines bearing 2,5-dimethylpyrrolyl and methyl(3-pyridylmethyl)amino groups in the periphery, here we report the synthesis and characterization of unsymmetrical porphyrazines with peripheral 2,5-di(2-thienyl)pyrrolyl and dimethylamino groups that break the molecular C₄ symmetry. The porphyrazines were prepared via macrocyclization reactions of a dinitrile precursor. Variable-temperature ¹H NMR experiments, single crystal X-ray work and UV–Vis spectra in different solvents of the unsymmetrical magnesium porphyrazine provided information on the structural and electronic features of the entire macrocyclic system. A detailed discussion of the UV–Vis spectra in different solvents emphasizes the role played by the extended peripheral 2,5-di(2-thienyl)pyrrolyl substituent.     

High-spin complex [FeL2(NCS)2]·H2O [L = 3,5-di(pyrimidin-2-yl)-4H-1,2,4-triazol-4-amine]: Synthesis and properties

Complex [FeL₂(NCS)₂]·H₂O (L = 3,5-di(pyrimidin-2-yl)-4H-1,2,4-triazol-4-amine) was prepared as the first example of complex compounds of transition metals with 3,5-di(pyrimidin-2-yl)-4H-1,2,4-triazol-4-amines. The coordination core of the iron atom is a distorted octahedron FeN₆. In the range 80–300 K the complex is high-spin, μ_eff ∼ 5.3 MB. The parameter of the crystal field splitting, 10Dq, for [FeL₂(NCS)₂]·H₂O is ∼10800 cm⁻¹.     

Synthesis of π-conjugated poly(arylene)s by polycondensation of 1,4-bis(3-methylpyridin-2-yl)benzene and aryl dibromides through regiospecific C-H functionalization process

On the basis of the Ru-catalyzed regiospecific direct double arylation of benzene rings possessing 3-methylpyridin-2-yl substituents to produce 1-aryl-2-(3-methylpyridin-2-yl)benzene derivatives, the synthesis of poly(p-phenylene) derivatives having 2,5-bis(3-methylpyridin-2-yl) substituents is described. The reaction of 1,4-bis(3-methylpyridin-2-yl)benzene with bromobenzene (2 equiv) was carried out in the presence of [RuCl₂(η⁶-C₆H₆)]₂ (5 mol %) in 1-methyl-2-pyrrolidone at 120°C for 24 h to produce 1,4-bis(3-methylpyridin-2-yl)-2,5-diphenylbenzene in 99% yield as a sole product. Neither 2,6-diphenylated nor further phenylated products was produced under the examined conditions. This regiospecific double arylation process was then applied to the synthesis of π-conjugated polymers by use of aryl dibromides such as 1,4-dibromobenzene, 2,7-dibromo-9,9-dihexylfluorene, and 2,5-dibromothiophene. For example, a polymer was obtained in 73% yield by using 1,4-dibromobenzene, whose M_n and M_w/M_n were estimated to be 3300 and 1.51, respectively. The bathochromic shift of the ultraviolet (UV)–visible absorption spectrum with respect to that of the model compound, 1,4-bis(3-methylpyridin-2-yl)-2,5-diphenylbenzene, indicated the extension of the π-conjugation. The blue fluorescence was also observed for the polymer upon the UV irradiation. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2771–2777     

Polymers to Selectively Remove Oxidizing Anions from Non-Oxidizing Anions and NO3 − and NO2 − and NO2 − From Polluted Waters

Abstract

A copolymer of 1-phenyl-2-diethylaminoethyl-p-aminobenzoate and polyvinyl-benzyl chloride was found to have a greater capacity for NO₃ ^? and NO₂ ^? than a previously reported nitron polymer but did not react as rapidly. The resin is readily regenerated with NH₄OH or NH₄Cl and is not affected by the pH of the water over the range of 4–10.

A copolymer of 1-(4′-nitrophenyl)-2-diethyl aminoethyl-p-nitrobenzoate and polyvinylbenzyl chloride was found to react nearly as fast as the nitron polymer and have a larger capacity for NO₃ ^? and NO₂ ^?.     

Synthesis and urease inhibition studies of some new quinazolinones

In this study, novel quinazolinones were designed, synthesized, characterized by FT-IR, ¹H-NMR, ¹³C-NMR spectral data, and LC–MS. New compounds inhibitory activities on urease were assessed. All of the compounds exhibited potent urease inhibitory activities. Especially in the synthesized compounds, 2-benzyl-3-({5-[(4-nitrophenyl)amino]-1,3,4-thiadiazol2-yl}methyl)quinazolin-4(3H)-one has the best inhibitory effect against Jack bean urease with IC₅₀ = 3.30 ± 0.09 μg/mL. And also, N-(4-nitrophenyl)-2-[(4-oxoquinazolin-3(4H)-yl)acetyl] hydrazinecarbothioamide, N-(4-fluorophenyl)-2-[(4-oxoquinazolin-3(4H)-yl)acetyl] hydrazinecarbothioamide, and 2-benzyl-3-({5-[(4-fluorophenyl)amino]-1,3,4-thiadiazol-2yl} methyl)quinazolin-4(3H)-one have best activities among the synthesized compounds.     

Hetarylation of 1-methylpyrrole by isoquinoline in the presence of aromatic or aliphatic sulfonyl chlorides

When N-alkyl(or aryl) sulfonylisoquinolinium salts are reacted in situ with 1-methylpyrrole, 2-aryl (or alkyl) sulfonyl-1-(pyrrole-2-yl)-1,2-dihydroixoquinolines and 2,5-di[2-aryl(or alkyl)-sulfonyl-1,2-dihydroisoquinolin-1-yl]-1-methylpyrroles form with high yields.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1379–1382, October, 1984.     

Some tetrazolium salts and their ion-association complexes with the molybdenum(VI) — 4-nitrocatechol anionic chelate

Several commercially available 2H-tetrazolium salts (TS) {2,3,5-triphenyl-2H-tetrazolium chloride (TTC), 3-(1-naphthyl)-2,5-diphenyl- 2H-tetrazolium chloride (Tetrazolium Violet, TV), 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT), 2-(4-iodophenyl)-3-(4-nitrophenyl)-5-phenyl-2H-tetrazolium chloride (INT) and 3,3′-(3,3′-dimethoxy-4,4′-biphenylene)-bis(2,5-diphenyl- 2H-tetrazolium) chloride (Tetrazolium Blue Chloride, BTC)} and their ion-associated complexes (IAC) with the Mo(VI) — 4-nitrochatechol (4-NC) anionic chelate [MoO₂(4-NC)₂]²⁻ have been investigated by differential thermal analysis (DTA) and thermogravimetric analysis (TG). Some special features of the thermal behavior of the compounds have been discussed. The results show that the thermal stability of IAC depends on the factors determining the values of their association constants β: molecular mass and the presence of nitrophenyl substituent(s) in the tetrazolium ring.     

Characterization of anomeric differences of ammonium-bound monomeric and dimeric complex ions of 1α- and 1β-azido-pentofuranosyl derivates by kinetic method

Relative stabilities (ΔG^c) of ammonium-bound monomers and dimers of anomeric β- -pentofuranosyl 1α- and 1β-azide derivates are determinate using the kinetic method by measuring relative rates of competitive collision-induced dissociations of dimeric [ANH₄B]⁺ and trimeric [A₂NH₄B]⁺ or [ANH₄B₂]⁺ cluster ions. Comparison between calculated ammonium affinities (AAs) and relative stabilities (ΔG^c) of ammonium-bound monomers shows qualitative correlations between both thermochemical quantities, but in two examples the activation barrier differences of competitive fragmentation channels cause a large disparity between both thermochemical data. Therefore, the most stable ammonium-bound monomers of the anomeric lα- and lβ-2,3,5-tri-O-benzyl-β- -arabino-pento-furanosyl azides possess the lowest ammonium affinities and the highest relative stabilities. Two different relative stabilities measured for the same ammonium-bound homo- or hetero-dimers indicate dissimilar activated barriers of trimers transition states for dimer formations. The activated barriers of trimers depend on the relative stabilities of ammonium-bound monomer within the trimeric cluster ions.     

STRUCTURAL STUDIES ON PYRAZOLYLPYRIDINE LIGANDS AND COMPLEXES. 2. COMPARISONS BETWEEN BISPYRAZOLYLPYRIDINE LINKAGE ISOMERS AND WITH 2,2′,6′,2″-TERPYRIDINE JERZY ZADYKOWICZ

Abstract

Crystal structures were obtained for the 3(C),2′;6′,3″(C)-linked bispyrazolylpyridines 2,6-di(2H-4,5,6,7-tetrahydroindazol-3-yl)pyridine (1), 2,6-di(l-methyl-4,5,6,7-tetrahydroindazol-3-yl)pyridine (2), 2,6-di(1 -(4-ethoxycarbonylphenyl)-4,5,6,7-tetrahydroindazol-3-yl)pyridine (3) and for the homoleptic Ru^II complex of 2, [Ru(2)₂]Cl₂, which crystallized with 7 molecules of CHCl₃. Ligand 1 adopts the inter-and intramolecularly hydrogen-bonded syn,syn rotameric conformation, while 2 and 3 were in the anti,anti forms. Relative to the latter, iigand distortions were assessed in 1 (considered as a H⁺ complex) and [Ru(2)₂]Cl₂. Comparisons were drawn with other tridentate ligands containing a pyridine nucleus, specifically the 1(N),2′;6′,1″(N″) linkage isomers and 2,2′;6′,2″-terpyridine, in both free and Ru^II complexed forms, as well as with their bidentate analogues. Unlike with bidentate ligands, the bonds to the pyridine moiety are shortest, the outer heterocyclic rings are drawn inward and, overall, the ligands remain fairly planar. Flanking substituents remain well splayed out in the 1,2′;6′,1″-linked bispyrazolylpyridines, are more parallel in the 3,2′;6′,3″ linkage isomers and are unfavorably compressed in terpyridines.     

Crystallographic characterization of three cathinone hydrochlorides new on the NPS market: 1-(4-methylphenyl)-2-(pyrrolidin-1-yl)hexan-1-one (4-MPHP), 4-methyl-1-phenyl-2-(pyrrolidin-1-yl)pentan-1-one (α-PiHP) and 2-(methylamino)-1-(4-methylphenyl)pentan-1-one (4-MPD)

Cathinones belong to a group of compounds of great interest in the new psychoactive substances (NPS) market. Constant changes to the chemical structure made by the producers of these compounds require a quick reaction from analytical laboratories in ascertaining their characteristics. In this article, three cathinone derivatives were characterized by X-ray crystallography. The investigated compounds were confirmed as: 1-[1-(4-methylphenyl)-1-oxohexan-2-yl]pyrrolidin-1-ium chloride ( 1 , C₁₇H₂₆NO⁺·Cl^?, the hydrochloride of 4-MPHP), 1-(4-methyl-1-oxo-1-phenylpentan-2-yl)pyrrolidin-1-ium chloride ( 2 ; C₁₆H₂₄NO⁺·Cl^?, the hydrochloride of α-PiHP) and methyl[1-(4-methylphenyl)-1-oxopentan-2-yl]azanium chloride ( 3 ; C₁₃H₂₀NO⁺·Cl^?, the hydrochloride of 4-MPD). All the salts crystallize in a monoclinic space group: 1 and 2 in P2₁/c, and 3 in P2₁/n. To the best of our knowledge, this study provides the first detailed and comprehensive crystallographic data on salts 1 – 3 .     

Design and synthesis of 2-substituted-8-hydroxyquinline zinc complexes with hole-transporting ability for highly effective yellow-light emitters

Four multifunctional 8-hydroxyquinoline derivatives were designed and synthesized, their structures were identified by FT-IR, ¹H NMR, MS and elemental analysis. Among them are (E)-2-(2-(9-(4-methoxyphenyl)-9H-carbazol-3-yl)vinyl) quinolato-zinc (1), (E)-2-(2-(9-p-tolyl-9H-carbazol-3-yl)vinyl)quinolato-zinc (2), (E)-2-(2-(9H-fluoren-2-yl)vinyl)quinolato-zinc (3), and (E)-2-(2-(phenanthren-9-yl)vinyl)quinolato-zinc (4). The electroluminescence (EL) and hole-transporting characteristics of these materials were investigated on four configurations: (A) ITO/2-TNATA/NPB/1, 2, 3 or 4/Alq₃/LiF/Al; (B) ITO/2-TNATA/NPB/1, 2, 3 or 4/LiF/Al; (C) ITO/2-TNATA/1, 2, 3 or 4/Alq₃/LiF/Al; and (D) ITO/2-TNATA/1 or 2/NPB/Alq₃/LiF/Al. The maximum luminescence and current efficiencies of are 3556 cd m⁻² (at 13 V) and 2.17 cd A⁻¹ (at 9 V) for compound 2, 4624 cd m⁻² (at 15 V) and 2.1 cd A⁻¹ (at 7 V) for compound 3, and 3164 cd m⁻² (at 14 V) and 1.83 cd A⁻¹ (at 13 V) for compound 4 in the configuration D, respectively, indicating that they are good multifunctional materials with strong hole-transporting abilities and luminescence properties.     

Regioselective Reaction of N1-Benzyl-N2-(4-nitrophenyl)ethanediamide and Acetylenic Esters

The regioselective reaction of N¹-benzyl-N²-(4-nitrophenyl)ethanediamide with dialkyl acetylenedicarboxylates or alkyl propiolates in the presence of triphenylphosphine leads to dialkyl 4-benzylamino-1-(4-nitrophenyl)-5-oxo-2,5-dihydro-1H-pyrrole-2,3-dicarboxylates or alkyl 4-benzylamino-1-(4-nitrophenyl)-2-oxo-5-pyrrolidinecarboxylates in good yields.     

A two-dimension medium band gap conjugated polymer based on 5,10-bis(alkylthien-2-yl)dithieno[3,2-d:3′,2′-d′]benzo[1,2-b:4,5-b′]dithiophene: Synthesis and photovoltaic application

A two-dimension medium band gap copolymer poly{5,10-bis(4,5-didecylthien-2-yl)dithieno[2,3-d:2′,3′-d′]benzo[1,2-b:4,5-b′]dithiophene-2,7-diyl-alt-2,5-di(3-octylthien-2-yl) thiophen-5,5′-diyl}, named as PDTBDT-T-3T, was prepared by the palladium-catalyzed Stille cross coupling reaction and characterized. The resulting polymer exhibits good solubility in common organic solvents, excellent thermal stability, and extensive light absorption from 300 nm to 650 nm with an optical band gap of 1.92 eV, the highest occupied molecular orbital (HOMO) level of ?5.03 eV and the hole mobility up to 1.92 × 10^?4 cm²·V^?1·s^?1. The power conversion efficiencies (PCEs) of 2.02%–3.19% have been achieved in the traditional PVCs for the copolymer. It should be noted that the PCEs of 4.2% for the inverted PVCs from the copolymer with PFN (poly[(9,9-bis(3′-(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctyl- fluorene)]) as cathode modifying interlayer, were similar with the PCEs of 4.39% for the inverted PVCs from P3HT:PC₇₁BM at the same condition. These results indicated that the copolymer could be used as potential candidate for P3HT.     

Synthesis of new donor-acceptor polymers containing thiadiazoloquinoxaline and pyrazinoquinoxaline moieties: low-band gap, high optical contrast, and almost black colored materials

Two low band gap conjugated polymers, poly[4,9-bis(4-hexylthien-2-yl)-6,7-di(thien-2-yl)-[1,2,5]thiadiazolo[3,4-g]quinoxaline] (PHTTQ) and poly[5,10-bis(4-hexylthien-2-yl)-2,3,7,8-tetra(thien-2-yl)pyrazino[2,3-g]quinoxaline] (PHTPQ), consisting of alternating electron-rich 3-hexylthiophene and electron-deficient 6,7-di(thien-2-yl)-[1,2,5]thiadiazolo[3,4-g]quinoxaline (TTQ) and 2,3,7,8-tetra(thien-2-yl)-2,3-dihydropyrazino[2,3-g]quinoxaline (TPQ) units were synthesized electrochemically. The structures of the π-conjugated monomers were tailored using thiophene as the pendant group on the acceptor units (TTQ and TPQ). The electrochemical and optical properties of the polymers were investigated by cyclic voltammetry and UV-vis-NIR spectroscopy. The absorption spectra of PHTPQ, revealing a 1.0 eV band gap, exhibited three maxima at 352 nm, 535 nm, and 750 nm. Consequently, its absorption spectra cover the region between 400 and 800 nm, which make the polymer almost black in appearance. PHTTQ shows a λ_max value of 820 nm and a band gap of 0.8 eV which is very low among other [1,2,5]thiadiazolo[3,4-g]quinoxaline-containing donor-acceptor type polymers.     

New 6-(4-Bromophenyl)-imidazo[2,1-b]thiazole Derivatives: Synthesis and Antimicrobial Activity

Summary.  New 4-alkyl/aryl-1-((6-(4-bromophenyl)-imidazo[2,1-b]thiazol-3-yl)-acetyl)-3-thiosemicarbazides and 3-alkyl/aryl-2-(((6-(4-bromophenyl)-imidazo[2,1-b]thiazol-3-yl)-acetyl)-hydrazono)-4-thiazolidinones were synthesized from 6-(4-bromophenyl)-imidazo[2,1-b]thiazole-3-acetic acid hydrazide. Their structures were elucidated by elemental analyses and spectroscopic data. All compounds were tested for antibacterial and antifungal activities. The antimicrobial activities of the compounds were assessed by the microbroth dilution technique. The compounds were also evaluated for antituberculosis activity against Mycobacterium tuberculosis H₃₇Rv (ATCC 27294); they exhibited varying degrees of inhibition in the in vitro primary screening at 6.25 μg · cm⁻³. The most active compound was 3-(4-nitrophenyl)-2-(((6-(4-bromophenyl)-imidazo[2,1-b]thiazol-3-yl)-acetyl)-hydrazono)-4-thiazolidinone. Corresponding author. E-mail: nurayulusoy@yahoo.com Received December 10, 2001. Accepted (revised) March 1, 2002     

Synthesis of elastomeric polypropylene in bulk using C 1-symmetric ansa-metallocenes. New aspects of the synthesis of 1-(fluoren-9-yl)-2-(2-methyl-5,6-dihydrocyclopenta [f]-1H-inden-1-yl)ethane and complexes of zirconium and hafnium with this ligand

Isomeric 1-(fluoren-9-yl)-2-(2-methyl-5, 6-dihydrocyclopenta [f]-1 H-indenyl) ethanes 1a,b and C ₁-symmetric metallocenes, viz., rac-1-(η⁵-fluoren-9-yl)-2-(2-methyl-5, 6-dihydrocyclopenta [f]-η⁵-inden-1-yl) ethanezirconium dichloride (9) and rac-1-(η⁵-fluoren-9-yl)- 2-(2-methyl-5, 6-dihydrocyclopenta [f]η⁵-inden-1-yl)ethanehafnium dichloride (10), with these ligands were synthesized by modified procedures. The structures of compounds 1b (two crystalline modifications) and 10 were established by X-ray diffraction analysis. The synthesis of polypropylene (PP) in bulk was studied in the presence of polymethylalumoxane-activated metallocenes 9 and 10 in the temperature range of 30–70°C. It was demonstrated that triisobutylaluminum can be used as a cocatalyst. In this case, the molecular weight of PP increases by a factor of ∼2. An increase in the reaction temperature leads to an increase in stereoregularity and crystallinity of PP. The polymer synthesized at high temperatures crystallizes in the γ form. The resulting PP is characterized by a wide range of properties from rigid crystalline thermoplastic to amorphous elastomeric. Samples, which have a high molecular weight and moderate isotacticity, exhibit high elastomeric and durability properties.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 400–413, February, 2005.