Bioactive saponins and glycosides. XVI. Nortriterpene oligoglycosides with gastroprotective activity from the fresh leaves of Euptelea polyandra Sieb. et Zucc. (1): structures of Eupteleasaponins I, II, III, IV, V, and V acetate

The saponin fraction from the fresh leaves of Euiptelea polyandra Sieb. et Zucc. was found to exhibit potent gastroprotective activity. Fourteen new nortriterpene saponins called eupteleasaponins were isolated from the saponin fraction with gastroprotective activity. The structures of eupteleasaponins I, I1, III, IV, V, and V acetate were determined on the basis of chemical and physicochemical evidence as 3-O-alpha-L-rhamnopyranosyl(1-->2)-beta-D-glucopyranosyl(1 -->3)-beta-D-xylopyranosylakebonoic acid 28-O-beta-D-glucopyranosyl ester, 3-O-alpha-L-rhamnopyranosyl(1-->2)-[alpha-L-rhamnopyranosyl(1 -->4)-beta-D-glucopyranosyl(1-->3)-beta-D-xylopyranosylakebonoic acid 28-O-beta-D- D-glucopyranosyl(1-->3)-beta-D-xylopyranosylakebonoic acid 28-O-beta-D-glucopyranosyl ester, 3-O-alpha-L-rhamnopyranosyl(1-->2)-alpha-L-rhamnopyranosyl(1 -->4)-beta-D-glucopyranosyl(1-->3)-beta-D-xylopyranosylakebonoic acid 28-O-beta-D-glucopyranosyl ester, 3-O-alpha-L-rhamnopyranosyl(1 -->2)-[alpha-L-arabinopyranosyl(1-->4)-alpha-L-rhamnopyranosyl(1-- >4)]-beta-D- glucopyranosyl(1-->3)-beta-D-xylopyranosylakebonoic acid 28-O-beta-D-glucopyranosyl ester, 3-O-alpha-L-rhamnopyranosvl(1-->2)-[alpha-L-arabinopyranosyl (1 -->4)-beta-L-rhamnopyranosyl(1 -->4)]-beta-D-glucopyranosyl(1 -->3)-beta-D-xylopyranosylakebonoic acid, 3-O-alpha-L-rhamnopyranosyl(1 -->2)-beta-D-glucopyranosvl(1-->3)-beta-D-xylopyranosyleupteleo genin, and 3-O-alpha-L-rhamnopyranosyl(1-->2)-6"-O-acetyl-gamma-D-glucopyranosyl(1 -->3)-beta-D-xylopyranosyleupteleogenin.     

Investigation of removal of Cr(VI), Mo(VI), W(VI), V(IV), and V(V) oxy-ions from industrial waste-waters by adsorption and electrosorption at high-area carbon cloth

Adsorption and electrosorption of Cr(VI), Mo(VI), W(VI), V(IV), and V(V) ions from water samples at low concentration were studied at high-area C-cloth electrodes. The concentrations of ions in the solution were monitored using in situ UV spectroscopy. All the investigated ions, except V(IV), showed better adsorption in acidic media. Positive polarization of the C-cloth caused increased adsorption of Cr(VI), Mo(VI), and V(V) ions. When previously adsorbed, Mo(VI) and V(V) ions were shown to be largely desorbable by negative polarization of the C-cloth. Since V(IV) does not become adsorbed significantly at the C-cloth in acidic media, the method provides an interesting means for separation of V(V) and V(IV) species in solution.     

Chelating behavior of macroreticular hydroxamic acid resin towards molybdenum(VI), tungsten(VI), uranium(VI) and vanadium(V)

Summary The properties and behaviour of the hydroxamic acid resin have been studied and shown to be an highly selective resin for molybdenum(VI), tungsten(VI), uranium(VI) and vanadium(V) ions. The stability constants of these metal ion complexes with the resin have been determined. The sorption and desorption characteristics of these metal ions on this resin and the methods for the separation of these metal ions from each other on a short column of such resin were also developed.

---

Komplexierungsverhalten von makroretikularem Hydroxamsäureharz gegenüber Molybdän(VI), Wolfram(VI), Uran(VI) und Vanadium(V)

Zusammenfassung Die Eigenschaften und das Verhalten von Hydroxamsäureharz wurden untersucht. Das Harz erwies sich als hochselektiv für Mo(VI), W(VI), U(VI) und V(V). Die Stabilitätskonstanten der Komplexe wurden bestimmt, die Sorptions- und Desorptionscharakteristica wurden untersucht und Trennungsmethoden für die genannten Ionen an einer kurzen Säule entwickelt.

     

Kinetics of reduction of transition metal ions by sodium tetrahydroborate. Reduction of molybdenum(VI) and tungsten(VI)

Summary The kinetics of reduction of molybdenum(VI) and tungsten(VI) ions by NaBH₄ in buffered aqueous solution have been investigated. The reaction rate depends upon the first powers of the concentrations of the reactants. The temperature was varied, and the activation parameters were evaluated. Chemical and spectral evidence for the formation of molybdenum(V) and tungsten(V), as the reaction products, is presented. Plausible mechanistic pathways for these reactions are suggested.     

The Raman spectra of the KOH-doped ice polymorphs: V and VI

The effect on the Raman spectra of the proton ordering induced by KOH in the high pressure phases of ice, ice V and VI has been studied. Our previous Raman studies of ice V and ice VI (ref.1) showed spectroscopic evidence of partial proton ordering at low temperatures (below about 130 K) in ice V and a possible phase change in ice VI. These conclusions were made on the measurements of the lattice vibration region. The present results, based on the observation of the bands due to the uncoupled O-D stretching vibrations of KOH-doped ice V and, in particular, ice VI, show that some kind of proton ordering or partial proton ordering may be induced by the presence of KOH dopant in these two ices.A Lorentzian curve fit has been used to separate the main band from the side bands in the relatively complex structured band due to the uncoupled O-D stretching vibration in ice V and ice VI.     

Alpha-benzoinomixe: Extracting agent for uranium(VI), tungsten(VI), molybdenum(VI) and some transition metals of the iron family

The effect of pH on the percent extraction of vanadium(V), iron(II), cobalt(II), nickel(II), copper(II), molybdenum(VI), tungsten(VI) and uranium(VI) by -benzoinoxime in different solvents has been studied. The maximum recovery is not appreciably affected by the nature of the solvent, but occurs at different pH values for different metals. The pH corresponding to maximum extraction increases with increasing hydrolysis pK of the species in aqueous solution, and decreases with increasing stability constant of the complexes formed. Alpha-benzoinoxime allows the separation of these metal ions into three groups: V(V), Mo(VI) and W(VI) are extracted at pH=2, U(VI) at pH=5, Fe(II), Cu(II), Co(II) and Ni(II) at around pH=10.     

Separation and concentration of molybdenum(VI) and tungsten(VI) with chelating ion-exchange resins containing sulphur ligands

Three chelating ion-exchange resins based on macroreticular polyacrylonitrile-divinylbenzene copolymers with thioglycollic acid and cysteine as functional groups have been tested for separation of molybdenum(VI) and tungsten(VI). On a short column of the thioglycollic acid resin, molybdenum(VI) and tungsten(VI) can be selectively sorbed from pH-4.3 acetate buffer and eluted with 2M hydrochloric acid and a mixture of 0.1M sodium hydroxide and 0.1M sodium chloride, respectively, with quantitative recovery even at very low concentrations. Simulated sea-water samples have been analysed.     

The mechanisms of preconcentration and voltammetric behaviour of uranium(VI) at glassy carbon electrodes modified by trioctylphosphine oxide

Uranium(VI) (?10^?5 M) can be determined at glassy carbon (GC) electrodes modified with a multilayer of trioctylphosphine oxide (TOPO) in a two-step procedure involving preconcentration at the electrode at potentials near O V vs. SCE and stripping in a cathodic scan. Various voltammetric and capacity measurements were made in attempts to elucidate the mechanisms and kinetics of the processes. The uranium(VI) is preconcentrated by reaction with the TOPO in which GC surface groups participate. During the cathodic stripping step, preconcentrated uranium(VI) amplifies the reduction current of GC surface functional groups, so that the electrode reaction can be considered as mediated electron transfer. The rate-determining steps are the diffusion of the analyte in the solutin during preconcentration and charge transfer in the bulk of the multilayer during stripping. The acetate buffer used affects the reaction in a complicated manner which is discussed in detail.     

Synthesis, amino-functionalization of mesoporous silica and its adsorption of Cr(VI)

Mesoporous silica materials with a centered rectangular symmetry (cmm) have been synthesized through a facile direct-templating method using tetraethylorthosilicate (TEOS) and amphiphilic block co-polymers Pluronic P123 under acidic conditions. The amino groups have been grafted to as-synthesized mesoporous silica by [1-(2-amino-ethyl)-3-aminopropyl]trimethoxysilane (AAPTS). Thus obtained amino-functionalized mesoporous silica (denoted as NN-silica) was used for sequestration of Cr(VI) from aqueous solution. After sequestration of Cr(VI), the sample was denoted as Cr(VI)-silica. The parent mesoporous silica, NN-silica and Cr(VI)-silica were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR) and N(2) adsorption-desorption isotherms. XRD and TEM results confirm that the structure of these samples is centered rectangular symmetry (cmm). N(2) adsorption-desorption isotherms show that there is a remarkable decrease in surface area and pore volume for NN-silica (S(BET)=54.5 m(2)g(-1), V(P)=0.09 cm(3)g(-1)) and Cr(VI)-silica (S(BET)=53.2 m(2)g(-1), V(P)=0.07 cm(3)g(-1)) compared to the parent mesoporous silica (S(BET)=444.0 m(2)g(-1), V(P)=0.71 cm(3)g(-1)). The BJH desorption average diameter of NN-silica, Cr(VI)-silica and the parent mesoporous silica is 4.40 nm, 4.07 nm and 5.11 nm, respectively. The results reveal the channels of as-synthesized mesoporous silica are essentially grafted with abundant amino groups and loaded with Cr(VI). The adsorption experiment results show that the functionalized mesoporous silica materials possess an increased Cr(VI) adsorption capacity and the maximum Cr(VI) loadings at 25, 35 and 45 degrees C can reach 2.28, 2.86 and 3.32 mmol/g, respectively.     

Separation of the Oxyanions of Re(VII), Mo(VI), Cr(VI), W(VI), and V(V) from a Multicomponent Solution at pH 6 by foam Fractionation

Abstract

An experimental investigation is presented of the foam separation of the oxyanions of Re(VII), Mo(VI), Cr(VI), W(VI), and V(V). The pH 6.0, multicomponent aqueous solutions are 1.0 × 10 ^?6 M in each metal. The effect of chloride competition with the metal oxyanions for the cationic surfactant is determined with NaCl concentrations up to 0.3 M. With proper NaCl concentration adjustments, V(V) can be separated completely from the other four metals, and Re(VII) and Mo(VI) from the other three. Pulsed surfactant dosage is investigated for 1.0 × 10 ^?6 M Mo(VI) solutions at pH 6.0 and 3.1.     

Biosorption of chromium(VI) and arsenic(V) onto methylated yeast biomass

Yeast biomass was methylated in a 0.1 M HCl methyl alcohol solution at room temperature and the methylated yeast (MeYE) was applied to the adsorptive separation of Cr(VI) and As(V) anions from aqueous solutions. At near-neutral pH, while Cr(VI) and As(V) anions were scarcely adsorbed onto unmethylated yeast biomass, the amounts adsorbed increased with increasing methylation degree. The amount of Cr(VI) adsorbed onto MeYE was almost constant at pH 4-6 and decreased with increasing pH above pH 6. The amount of As(V) adsorbed onto MeYE was rather lower than that of Cr(VI) and it had a peak at about pH 7. A metal-binding model was used to describe the adsorption characteristics of Cr(VI) and As(V) on MeYE. The results showed that MeYE has two different types of adsorption sites. The saturated amount of Cr(VI) and As(V) adsorbed onto MeYE having methylation degree 0.94 was 0.55 mmol g(-1).     

Synthetic, spectral, and antimicrobial aspects of biologically relevant coordination compounds of dioxomolybdenum(VI) and oxovanadium(V)

Heterocyclic ketimines, 5-nitro-3-(indolin-2-one)hydrazinecarbothioamide (L¹H), 5-nitro-3-(indolin-2-one)hydrazinecarboxamide (L²H), 6-nitro-3-(indolin-2-one)hydrazinecarbo-thioamide (L³H), and 6-nitro-3-(indolin-2-one) hydrazinecarboxamide (L⁴H), were prepared by the condensation of thiosemicarbazide and semicarbazide hydrochloride (in the presence of sodium acetate) in ethanol with the respective ketones. The dioxomolybdenum(VI) complexes and oxovanadium(V) complexes have been prepared by mixing dioxobis(2,4-pentanedinato)molybdenum(VI) in 1: 2 molar ratios and vanadium oxytrichloride in 1: 1 and 1: 2 molar ratios with monobasic bidentate ketimines. The resulting complexes have been characterized by elemental analysis, conductance measurements, and spectral studies, including IR, ¹H NMR, and UV spectra. The ketimines and their corresponding metal complexes have been tested on a number of pathogenic bacteria and fungi in order to assess their growth inhibition potency at different concentrations. The article was submitted by the authors in English.     

Imido transfer from bis(imido)ruthenium(VI) porphyrins to hydrocarbons: effect of imido substituents, C-H bond dissociation energies, and Ru(VI/V) reduction potentials

[Ru(VI)(TMP)(NSO2R)2] (SO2R = Ms, Ts, Bs, Cs, Ns; R = p-C6H4OMe, p-C6H4Me, C6H5, p-C6H4Cl, p-C6H4NO2, respectively) and [Ru(VI)(Por)(NTs)2] (Por = 2,6-Cl2TPP, F20-TPP) were prepared by the reactions of [Ru(II)(Por)(CO)] with PhI=NSO2R in CH2Cl2. These complexes exhibit reversible Ru(VI/V) couple with E(1/2) = -0.41 to -0.12 V vs Cp2Fe(+/0) and undergo imido transfer reactions with styrenes, norbornene, cis-cyclooctene, indene, ethylbenzenes, cumene, 9,10-dihydroanthracene, xanthene, cyclohexene, toluene, and tetrahydrofuran to afford aziridines or amides in up to 85% yields. The second-order rate constants (k2) of the aziridination/amidation reactions at 298 K were determined to be (2.6 +/- 0.1) x 10(-5) to 14.4 +/- 0.6 dm3 mol(-1) s(-1), which generally increase with increasing Ru(VI/V) reduction potential of the imido complexes and decreasing C-H bond dissociation energy (BDE) of the hydrocarbons. A linear correlation was observed between log k' (k' is the k2 value divided by the number of reactive hydrogens) and BDE and between log k2 and E(1/2)(Ru(VI/V)); the linearity in the former case supports a H-atom abstraction mechanism. The amidation by [Ru(VI)(TMP)(NNs)2] reverses the thermodynamic reactivity order cumene > ethylbenzene/toluene, with k'(tertiary C-H)/k'(secondary C-H) = 0.2 and k'(tertiary C-H)/k'(primary C-H) = 0.8.     

Polarographic determination of cadmium, lead, nickel, thallium and uranium(VI) in isoquinoline formate

Summary The polarographic behaviour of Cd, Pb, Ni, Tl and U(VI) has been described in 0.1 M isoquinoline formate as base electrolyte. In all cases well defined reversible waves were obtained and determinations are possible in the presence of Mo, Co, Zn, Mn, Te, In, Se, Fe, Cr, V, Th, Zr, As, Sb, Ag, Hg and Cu.

---

Polarographische Bestimmung von Cadmium, Blei, Nickel, Thallium und Uran(VI) in Isochinolinformiat

Zusammenfassung Das polarographische Verhalten von Cd, Pb, Ni, Th. und U(VI) in 0,1 M Isochinolinformiatlösung wird beschrieben, Bestimmungsmöglichkeiten werden aufgezeigt. In allen Fällen werden gut definierte reversible Stufen erhalten. Folgende Elemente stören nicht: Mo, Co, Zn, Mn, Te, In, Se, Fe, Cr, V, Th, Zr, As, Sb, Ag, Hg, Cu.

     

Extraction of phosphorus(V), molybdenum(VI), and tungsten(VI) from fluoride solutions

The influence of titanim(IV) and silicon(IV) on the extraction of phosphorus(V), molybdenum (VI), and tungsten(VI) fluoride complexes by tributyl phosphate was studied.

     

Medicinal flowers. XXII. Structures of chakasaponins V and VI, chakanoside I, and chakaflavonoside A from flower buds of Chinese tea plant (Camellia sinensis)

Two acylated oleanane-type triterpene oligoglycosides, chakasaponins V and VI, an aromatic glycoside, chakanoside I, and an acylated flavonol oligoglycoside, chakaflavonoside A, were isolated from the flower buds of Chinese tea plant [Camellia sinensis (L.) O. KUNTZE]. The chemical structures of those new glycosides were elucidated on the basis of chemical and physicochemical evidence.     

Determination of vanadium(V) and molybdenum(VI) by means of a Landolt reaction

The determination of vanadium(V) and molybdenum(VI) by a Landolt-type reaction with bromate, iodide and ascorbic acid is reported. For the determination of vanadium(V) the molybdenum(VI) is masked with citrate-citric acid buffer, which also controls the pH. Molybdenum(VI) is determined in the presence of thiourea as masking agent for vanadium(V).     

Adsorption of metal anions of vanadium(V) and chromium(VI) on Zr(IV)-impregnated collagen fiber

The metal anions of vanadium (V) and chromium (VI) in aqueous solution can be effectively adsorbed by Zr(IV)-impregnated collagen fiber (ZrICF). The maximum adsorption capacity of V(V) takes place within the pH range of 5.0 to 8.0, while that of Cr(VI) is within the pH range of 6.0 to 9.0. When the initial concentration of metal ions was 2.00 mmol L⁻¹ and the temperature was 303 K, the adsorption capacity of V(V) on Zr-ICF was 1.92 mmol g⁻¹ at pH 5.0, and the adsorption capacity of Cr(VI) was 0.53 mmol g⁻¹ at pH 7.0. As temperature increased, the adsorption capacity of V(V) increased, while that of Cr(VI) was almost unchanged. The adsorption isotherms of the anionic species of V(V) and Cr(VI) can be fit by the Langmuir equation. The adsorption rate of V(V) follows the pseudo-first-order rate model, while the adsorption rate of Cr(VI) follows the pseudo-second-order rate model. Furthermore, ZrICF shows high adsorption selectivity to V(V) in the mixture solution of V(V) and Cr(VI). Practical applications of ZrICF could be expected in consideration of its performance in adsorption of V(V) and Cr(VI).     

Synthesis,Crystal Structure of Cis—dioxo—catecholatotungsten（VI） Complex and Its NMR Studies on the Interaction with ATP

Cis-dioxo-catecholatotungsten(VI) complex anion[W^(VI)O2-(OC6H4O)2]^2- was obtained with discrete protonated ethylenediamine (NH2CH2CH2NH3)^ cations by the reaction of tetrabutyl ammonium decatungstate with catechol in the mixed solvent of CH3OH,CH3CN and ethylenediamine,and compared with its molybdenum anaogue [Mo^(V) O2(OC6H4O)2]^3- by crystal structure,UV,EPR,The results of the UV and EPR spectra show that tungsten is less redox active than molybdenum since the molybdenum is reduced from Mo(VI) to Mo(V) but tungsten stays in the original highest oxidized state Mo(VI) when they are crystallized from the solution above.It is worthy to note that [W^(VI)O2(OC6H4O)]^2- shows the same coordination structure as its molybdenum analogue in which the metal center exhibits distorted octahedral coordination geometry with two cis-dioxocatecholate ligands and might have the related coordination structure feature with the cofactor of flavoenzyme because [Mo^(V)O2(OC6H4O)2]^3- presented essentially the same EPR spectra as flavoenzyme.The NMR studies on the interaction of the title complex with ATP reveal that the reduction of W(VI) to W(V) occurs when the title complex is dissolved in D2O and the W(V) is oxidized again when ATP solution is mixed with original solution and the hydrolysis of the catecholato ligand take places at mean time being monitored by ^1H NMR and ^13C NMR spectra.     

Ferrate(VI) and ferrate(V) oxidation of cyanide,thiocyanate, and copper(I) cyanide

Cyanide (CN⁻), thiocyanate (SCN⁻), and copper(I) cyanide (Cu(CN)₄³⁻) are common constituents in the wastes of many industrial processes such as metal finishing and gold mining, and their treatment is required before the safe discharge of effluent. The oxidation of CN⁻, SCN⁻, and Cu(CN)₄³⁻ by ferrate(VI) (Fe^VIO₄²⁻; Fe(VI)) and ferrate(V) (Fe^VO₄³⁻; Fe(V)) has been studied using stopped-flow and premix pulse radiolysis techniques. The rate laws for the oxidation of cyanides were found to be first-order with respect to each reactant. The second-order rate constants decreased with increasing pH because the deprotonated species, FeO₄²⁻, is less reactive than the protonated Fe(VI) species, HFeO₄⁻. Cyanides react 10³–10⁵ times faster with Fe(V) than with Fe(VI). The Fe(V) reaction with CN⁻ proceeds by sequential one-electron reductions from Fe(V) to Fe(IV) to Fe(III). However, a two-electron transfer process from Fe(V) to Fe(III) occurs in the reaction of Fe(V) with SCN⁻ and Cu(CN)₄³⁻. The toxic CN⁻ species of cyanide wastes is converted into relatively non-toxic cyanate (NCO⁻). Results indicate that Fe(VI) is highly efficient in removing cyanides from electroplating rinse water and gold mill effluent.