An Original Electrochemical Pathway for the Synthesis of Porphyrin Oligomers

An electrosynthesis process has allowed the formation of four oligomers, containing three, four, or five macrocycles. This method is based on the nucleophilic attack of porphyrins substituted by several pendant pyridyl groups to the electrogenerated radical cation of zinc β‐octaethylporphyrin (ZnOEP), according to an ECEC processes. Thus, a control of the number of macrocycles and of the geometry of the oligomers can be performed. These new compounds have been characterized by HRMS as well as ¹H NMR, UV/Vis, and fluorescence spectroscopy, and electrochemistry. The results show a strong influence of the pyridinium spacers on the macrocycles.     

Macrocyclic sulfamides: synthesis, hybridization, and metal binding properties

Four cyclophanes incorporating the cyclosulfamide sub-unit have been synthesised in high yield. The X-ray crystal structures of three of them, and of cyclosulfamide itself, provide useful insight into the hybridisation of such compounds. The ionophoric properties of the macrocycles are also reported, with the sulfamides showing unusual selectivity for rubidium (benzyl trimer), barium (pyridyl dimer) and silver (pyridyl dimer and trimer).     

Synthesis of Novel C2—Symmetric Chiral Polyamide Macrocycles Containing Pyridyl Side—arm

Three novcl C2-symmetic macrocycles containing pyridyl units have been prepared by the cyclic condensation of chiral diamide intermediates with 2,6-pyridinedicarbonyl dichloride in highly diluted solution at room temperature.     

Hydrogen bond-assisted macrocyclic oligocholate transporters in lipid membranes

Three macrocyclic oligocholates containing a carboxyl group, a guanidinium ion, and a Cbz-protected amine, respectively, were studied as membrane transporters for hydrophilic molecules. To permeate glucose across lipid bilayers, the macrocycles stacked over one another to form a transmembrane nanopore, driven by a strong tendency of the water molecules in the internal cavities of the amphiphilic macrocycles to aggregate in a nonpolar environment. To transport larger guests such as carboxyfluorescein (CF), the macrocycles acted as carriers to shuttle the guest across the membrane. Hydrogen-bonds between the side chains of the macrocycles strongly affected the transport properties. Surprisingly, the carboxyl group turned out to be far more effective at assisting the aggregation of the oligocholate macrocycles in the membrane than the much stronger carboxylate-guanidinium salt bridge, likely due to competition from the phosphate groups of the lipids for the guanidinium.     

Multicomponent Assembly of Macrocycles and Polymers by Coordination of Pyridyl Ligands to 1,4‐Bis(benzodioxaborole)benzene

Multicomponent reactions between 1,4‐benzenediboronic acid, catechol, and different pyridyl ligands are reported. The condensation of 1,4‐benzenediboronic acid with catechol gives 1,4‐bis(benzodioxaborole)benzene. Upon crystallization, the ester aggregates with the N‐donor ligands through dative B? N bonds. Depending on the nature of the pyridyl ligand, molecularly defined macrocycles or polymeric structures are obtained. 1D polymers are formed with 4,4‐bipyridine and 1,2‐di(4‐pyridyl)ethylene, whereas a 2D network is obtained with the tetradentate ligand tetra(4‐pyridylphenyl)ethylene. These results highlight the utility of dative B? N bonds in structural supramolecular chemistry and crystal engineering.     

Aromatically functionalized cyclic tricholate macrocycles: aggregation, transmembrane pore formation, flexibility, and cooperativity

The aggregation of macrocyclic oligocholates with introverted hydrophilic groups and aromatic side chains was studied by fluorescence spectroscopy and liposome leakage assays. Comparison between the solution and the membrane phase afforded insight into the solvophobically driven aggregation. The macrocycles stacked over one another in lipid membranes to form transmembrane nanopores, driven by a strong tendency of the water molecules in the interior of the amphiphilic macrocycles to aggregate in a nonpolar environment. The aromatic side chains provided spectroscopic signatures for stacking, as well as additional driving force for the aggregation. Smaller, more rigid macrocycles stacked better than larger, more flexible ones because the cholate building blocks in the latter could rotate outward and diminish the conformation needed for the water-templated hydrophobic stacking. The acceptor-acceptor interactions among naphthalenediimide (NDI) groups were more effective than the pyrene-NDI donor-acceptor interactions in promoting the transmembrane pore formation of the oligocholate macrocycles.     

Planar macrocyclic fluoropentamers as supramolecular organogelators

Despite their great diversities, 2D-shaped macrocycles that can serve as the organogelators have been surprisingly rare; two planar macrocyclic fluoropentamers designed by us were highly able to gelate organic solvents, largely derived from their strong tendency to form 1D stacked fibrillar structures stabilized by both interplanar H-bonds and π-π stacking forces.     

Tight Xenon Confinement in a Crystalline Sandwich‐like Hydrogen‐Bonded Dimeric Capsule of a Cyclic Peptide

A cyclic hexapeptide with three pyridyl moieties connected to its backbone forms a hydrogen‐bonded dimer, which tightly encapsulates a single xenon atom, like a pearl in its shell. The dimer imprints its shape and symmetry to the captured xenon atom, as demonstrated by ¹²⁹Xe NMR spectroscopy, single‐crystal X‐ray diffraction, and computational studies. The dimers self‐assemble hierarchically into tubular structures to form a porous supramolecular architecture, whose cavities are filled by small molecules and gases.     

Synthesis and self-association of an imine-containing m-phenylene ethynylene macrocycle

The purpose of this study was to test the suitability of the imine bond as a structural unit within the backbone of phenylene ethynylene macrocycles and oligomers by determining the ability of m-phenylene ethynylene macrocycle 1 to form pi-stacked aggregates in both solution and the solid state. Macrocycle 1, with two imine bonds, was synthesized in high yield from diamine 4 and dialdehyde 5. The imine-forming macrocyclization step was carried out under a variety of conditions, with the best yield obtained simply by refluxing the reactants in methanol. The self-association behavior of 1 in various solvents was probed by (1)H NMR. The association constants (K(E)) in acetone-d(6) and tetrahydrofuran-d(8) were determined by fitting the concentration-dependent chemical shifts with indefinite self-association models. The results showed that solvophobically driven intermolecular pi-pi stacking could be preserved in the imine-containing m-phenylene ethynylene macrocycles. Interestingly, in acetone macrocycle 1 exhibited a stronger tendency to form a dimer rather than higher aggregates. We postulate that this behavior may be due to electrostatic attraction between dipolar imine groups. The solid-state packing of 1 was studied by wide- and small-angle X-ray powder diffraction (WAXD and SAXD). Bragg reflections of 1 were consistent with a hexagonal packing motif similar to our previous studies on m-phenylene ethynylene macrocycles that formed columnar liquid crystal phases.     

Tubular aggregates of cyclic oligothiophenes. A theoretical study

The geometries of neutral, mono-, and dioxidized tubular aggregates of cyclo[8]thiophenes containing up to 5 repeating units were fully optimized at the MPWB1K/3-21G* level of theory. Calculated interplane distances between macrocycles were found to be close to 3.1 A for neutral and charged aggregates. The binding energies between macrocycles in neutral intermediates were in the range of 40-45 kcal/mol, increasing for monocations and dropping strongly for dicationic species due to electrostatic repulsion between polarons. It was established that there exists a noticeable interaction between pi-orbitals of individual macrocycles in tubular aggregates as follows from decreasing of the band gap with a number of repeating units in aggregates and the polaron delocalization toward tube axes in oxidized species. A polaron pair is the most stable dicationic state for all studied molecules according to the calculations. A singlet polaron pair is more stable than a triplet one. The energy difference between singlet and triplet states is growing smaller with the size of the system, becoming zero for the pentamer corresponding to a completely dissociated bipolaron.     

Enantiopure Laterally Functionalized Alleno–Acetylenic Macrocycles: Synthesis,Chiroptical Properties,and Self‐Assembly in Aqueous Media

A family of shape‐persistent alleno–acetylenic macrocycles (SPAAMs), peripherally decorated with structurally diverse pendant groups, has been synthesized and characterized in enantiomerically pure form. Their electronic circular dichroism (ECD) spectra feature a strong chiroptical response, which is more than two times higher than for open‐chain tetrameric analogues. A water‐soluble oligo(ethylene glycol)‐appended SPAAM undergoes self‐assembly in aqueous solution. Morphology studies by cryogenic transmission electron microscopy (cryo‐TEM) revealed the formation of aggregates with fibrous fine structures that correspond to tubular, macrocyclic stacks.     

Molecular tectonics: design of enantiomerically pure helical tubular crystals with controlled channel size and orientation

The combination of four enantiomerically pure organic tectons composed of a rigid chiral backbone bearing two terminal pyridyl coordinating sites with ZnSiF(6) behaving as an infinite pillar leads to the formation of tubular 2-D enantiomerically pure helical channels with controlled size and orientation.     

Translocation of hydrophilic molecules across lipid bilayers by salt-bridged oligocholates

Macrocyclic oligocholates were found in a previous work (Cho, H.; Widanapathirana, L.; Zhao, Y. J. Am. Chem. Soc.2011, 133, 141-147) to stack on top of one another in lipid membranes to form nanopores. Pore formation was driven by a strong tendency of the water molecules in the interior of the amphiphilic macrocycles to aggregate in a nonpolar environment. In this work, cholate oligomers terminated with guanidinium and carboxylate groups were found to cause efflux of hydrophilic molecules such as glucose, maltotriose, and carboxyfluorescein (CF) from POPC/POPG liposomes. The cholate trimer outperformed other oligomers in the transport. Lipid-mixing assays and dynamic light scattering ruled out fusion as the cause of leakage. The strong dependence on chain length argues against random intermolecular aggregates as the active transporters. The efflux of glucose triggered by these compounds increased significantly when the bilayers contained 30 mol% cholesterol. Hill analysis suggested that the active transporter consisted of four molecules. The oligocholates were proposed to fold into "noncovalent macrocycles" by the guanidinium-carboxylate salt bridge and stack on top of one another to form similar transmembrane pores as their covalent counterparts.     

Cyclization of an Achiral Flipping Panel to Homochiral Tubes Exhibiting Circularly Polarized Luminescence

Macrocyclization of the bendable 2,7-dimethoxythianthrene with methylene linkages afforded a pair of homochiral macrocycles featuring a hex-nut-like geometry. Their structures were fully characterized by NMR spectroscopy, mass spectrometry, and single-crystal X-ray diffraction analysis. Their stable planar chirality facilitates efficient resolution of the pair of enantiomers which could be readily derivatized. Installing phenylethynyl groups on their rims leads to luminescent tubular macrocycles exhibiting circularly polarized luminescence with a large dissymmetry value |g_lum| of 5×10⁻³. Supramolecular binding of electron-deficient guests by the tube results in fluorescence quenching, which proved its potential for the future development of switchable chiroptical systems.     

Non-aggregational aromatic oligoamide macrocycles

Attaching peripheral amide groups to the backbone of cyclic aromatic oligoamides 1 leads to new macrocycles 2 that show drastically changed behavior including modest yields of formation and no tendency to aggregate while maintaining a rigid backbone and a defined, guest-binding internal cavity.     

A Supramolecular Strategy for the Synthesis of Cyclic Oligomers and Polymers by Ring Expansion

Ring-opening metathesis polymerization (ROMP) of strained macrocycles is a key method to prepare diverse polymers. However, lack of ring strain in most macrocycles is an impediment to polymerization. In this paper, the polymerization/oligomerization of unstrained macrocycles was achieved using a supramolecular approach, leading selectively to cyclic products. Diphenyl thiourea and other guest molecules were used as additives to the ROMP reaction of unstrained macrocycles. An intermediate host-guest complex leads to the stabilization of the open form of the macrocycle after treatment with Grubbs catalysts, thereby favoring polymerization by inhibiting the ring-closing reaction back to the monomer. This proof-of-concept enables ring-expansion polymerization of unstrained macrocycles leading to cyclic polymers with molecular weights up to 6700 Da.     

Synthesis and solvent driven self-aggregation studies of meso-"C-glycoside"-porphyrin derivatives

New types of porphyrin derivatives bearing "C-glycoside" moieties, either in 5,10,15,20- or in 5,15-meso-positions, were prepared and fully characterized. The presence of the glycosidic groups imparts to the title macrocycles, besides an amphiphilic character, a clear tendency to form chiral suprastructures upon solvent-driven self-aggregation in different aqueous-organic solvent mixtures. Supra-assembly phenomena, in terms of the size and morphology of the resulting structures, as well as their kinetics of aggregation, were studied by UV-visible, fluorescence, resonance light scattering (RLS), and CD spectroscopy, indicating that the morphology of the aggregates depends strongly on the structure of the porphyrin rings, and on the bulk conditions of aggregation.     

Synthesis of Phenylene Vinylene Macrocycles through Acyclic Diene Metathesis Macrocyclization and Their Aggregation Behavior

A series of phenylene vinylene macrocycles (PVMs) bearing substituents with various sizes and electronic properties have been synthesized through a one‐step acyclic diene metathesis macrocyclization approach and their aggregation behaviors have been investigated. In great contrast to the aggregation of the analogous phenylene ethynylene macrocycles, which aggregate only when substituted with electron‐withdrawing groups, these PVMs undergo exceptionally strong aggregation, regardless of the electron‐donating or ‐withdrawing characters of the substituents. The unusual aggregation behavior of the PVMs is further investigated with thermodynamic and computer modeling studies, which show a good agreement with the recently proposed direct through‐space interaction model, rather than the polar/π model. The high aggregation tendency of PVMs suggests the great potential of this novel class of shape‐persistent macrocycles in a variety of applications, such as ion channels, host–guest recognition, and catalysis.     

Poly(aryl ether)s containing o‐terphenyl subunits. II. Random poly(ether sulfone)s

The synthesis of a new A₂X‐type difluoride monomer, N‐2‐pyridyl‐4′,4″‐bis‐(4‐fluorobenzenesulfonyl)‐o‐terphenyl‐3,6‐dimethyl‐4,5‐dicarboxylic imide ( 3 ), is described. The monomer 3 was incorporated into a series of copoly(aryl ether sulfone)s by polymerization of 4,4′‐isopropylidenediphenol and 4,4′‐difluorophenylsulfone. The incorporation of monomer 3 had an observable effect on both the glass‐transition temperature of poly(aryl ether sulfone)s and the tendency for macrocyclic oligomers to form during polymerization. Replacement of the pyridyl imide group via a transimidization reaction with propargyl amine proceeded quantitatively and without polymer degradation. The acetylene containing copoly(aryl ether sulfone) could be crosslinked by simple thermal treatment, resulting in an increase in the glass‐transition temperature and solvent resistance. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 9–17, 2000     

Protonated free-base corroles: acidity, electrochemistry, and spectroelectrochemistry of [(Cor)H4]+, [(Cor)H5]2+, and [(Cor)H6]3+

Protonated meso-substituted free-base macrocycles of the form [(Cor)H4]+, [(Cor)H5]2+, and [(Cor)H6]3+ where Cor is the trianion of a given corrole, were chemically generated from neutral (Cor)H3 in benzonitrile by addition of trifluoroacetic acid (TFA) and characterized as to their relative acidity, electrochemistry, and spectroelectrochemistry. Three types of protonated free-base corroles with different electron-donating or electron-withdrawing substituents at the meso positions of the macrocycle were investigated. One is protonated exclusively at the central nitrogens of the corrole forming [(Cor)H4]+ from (Cor)H3, while the second and third types of corroles undergo protonation at one or two meso pyridyl substituents prior to protonation of the central nitrogens and give as the final products [(Cor)H5]2+ and [(Cor)H6]3+, respectively. Altogether the relative deprotonation constants (pKa) for 10 different corroles were determined in benzonitrile and analyzed with respect to the molecular structure and/or type of substituents on the three meso positions of the macrocycle. Mechanisms for oxidation and reduction of the protonated corroles are proposed in light of the electrochemical and spectroelectrochemical data.