预辐射甲基丙烯酸甲酯形成过氧化物的结构及引发活性研究

乙烯类单体,在氧存在下经电离辐照形成具有强引发能力的过氧化物.离开辐射场,在一定条件下,过氧化物分解为自由基立即引发聚合进行.这一过程称为预辐射聚合.前人曾研究了预辐射聚合的反应机制和动力学过程.但对于辐照产生的过氧化物的组成、结构及其行为,只有推测,而无任何研究工作.本文报道以甲基丙烯酸甲酯(MMA)为单体,研究预辐照产物的结构和引发活性的初步结果.     

N-甲基-N-(2-羟乙基)-对-甲苯胺存在下甲基丙烯酸甲酯的自由基聚合

测定了在N-甲基-N-(2-羟乙基)-对-甲苯胺(HMT)存在下,MMA以过氧化物引发的聚合速率和聚合表观活化能.发现HMT对BPO、LPO引发的MMA聚合有促进作用,提高聚合速率.由聚合物端基分析证实了含有HMT的碎片,表明由芳叔胺HMT与BPO反应产生的自由基能引发单体聚合,BPO-HMT引发聚合为一氧化还原引发聚合.     

超声辐照引发MMA微乳液聚合动力学研究

用自由基捕捉剂N,N-二苯基-2,4,6-三硝基苯肼基(DPPH)进行超声辐照引发甲基丙烯酸甲酯(MMA)微乳液聚合引发过程的动力学研究,结果表明,所得速率常数比超声辐照引发纯单体聚合的速率常数大一个数量级,说明超声辐照在微乳液聚合体系中的引发作用远远强于本体聚合;得到的表观活化能为正值,说明升温有利于超声辐照引发微乳液聚合.对聚合过程动力学的研究表明,引发剂用量决定聚合反应速率曲线恒速期的长短.     

丙酮对MMA-St无皂乳液聚合速率的影响

运用溶剂热法,以丙酮-水为分散介质,过硫酸钾为引发剂引发甲基丙烯酸甲酯(MMA)和苯乙烯(St)共聚,制备了P(MMA-St)。讨论了丙酮含量对MMA,St均聚和MMA-St共聚的影响。实验结果表明：随着丙酮含量的增加,MMA成核速率先减小后增大,聚合速率先减小后增大再减小;St成核速率先增大后减小再增大,聚合速率先增大后减小;丙酮含量对MMA-St共聚的聚合速率的影响与单体比例有关,当V(MMA)：V(St)=1：1时,聚合速率随丙酮的增加逐渐降低,当V(MMA)：V(St)=1：3和3：1时,聚合速率随丙酮的增加先增大后逐渐减小;当丙酮含量高于40％后,MMA,St各自均聚和共聚的反应速率均明显减小。     

新型感可见光的染料鎓盐光引发体系

本文报道了一种新型感可见光的引发体系-曙红双(二苯基碘鎓盐)(Eo(IPh_2)_2).在基态,这种体系具有良好的热稳定性,而在激发态时能发生离子对内光诱导电子转移反应,导致其发生漂白和碘鎓盐的分解反应,产生具有引发作用的自由基.该体系适用于一般烯类单体的自由基聚合,其中时丙烯酸酯类单体效果最好.在以甲基丙烯酯甲酯(MMA)为单体时,聚合反应速度满足动力学方程:R_p=l[Eo(IPh_2)_2]~(0.38)[MMA],并求得聚合反应的活化能E_c=7.00kcal/mol.氧在Eo(IPh_2)_2光敏引发聚合中,既起自由基聚合阻聚剂的作用,又起引发剂三重态猝灭剂作用     

氯丁胶乳乳液接枝甲基丙烯酸甲酯的反应动力学

采用乳液聚合法将甲基丙烯酸甲酯(MMA)接枝到氯丁胶乳上,红外光谱和核磁共振氢谱证实了接枝产物的生成。 研究了反应温度、乳化剂浓度、引发剂浓度和单体浓度对表观聚合速率的影响。 结果表明,当反应温度为50 ℃,引发剂叔丁基过氧化氢 四乙烯五胺（t-BHP/TEPA）用量为氯丁胶乳干重的0.5%,单体/聚合物质量比m(M)∶m(P)=3∶5,乳化剂十二烷基连苯醚二磺酸钠（DSB）用量为单体总质量1%时,单体转化率和接枝效率分别为99.1%和54.9%。 聚合反应动力学关系式为：Rp=Kc(E)0.15c(I)0.30c(MMA)1.41,式中,K为常数,在40~55 ℃范围内,聚合反应的表观活化能Ea＝60.2 kJ/mol。 接枝聚合基本符合自由基反应机理。     

氯丁胶乳乳液接枝甲基丙烯酸甲酯反应动力学

采用乳液聚合法将甲基丙烯酸甲酯(MMA)接枝到氯丁胶乳上,红外光谱和核磁共振氢谱证实了接枝产物的生成。研究了反应温度、乳化剂浓度、引发剂浓度和单体浓度对表观聚合速率的影响。结果表明,当反应温度为50℃,引发剂叔丁基过氧化氢-四乙烯五胺(t-BHP/TEPA)用量为氯丁胶乳干重的0.5%,单体/聚合物质量比m(M):m(P)=3:5,乳化剂十二烷基连苯醚二磺酸钠(DSB)用量为单体总质量1%时,单体转化率和接枝效率分别为99.1%和54.9%。聚合反应动力学关系式为:Rp=Kc(E)0.15c(I)0.30c(MMA)1.41,式中,K为常数,在40～55℃范围内,聚合反应的表观活化能Ea=60.2kJ/mol。接枝聚合基本符合自由基反应机理。     

含胺基功能性单体的聚合研究——Ⅱ.甲基丙烯酸N,N-二甲氨基乙酯在过氧化月桂酰引发下的聚合

研究了甲基丙烯酸N,N-二甲氨基乙酯(DMAEMA)在过氧化月桂酰(LPO)引发下的聚合动力学。求出了在40、50、60和70℃下的表观聚合速率。得到其聚合速度方程式为: Rp-Kp[DMAEMA]~(1.5)[LPO]~(0.5)其表现聚合活化能E_a为9.7 kcal/mol,并提出了含脂肪叔胺基单体参与氧化还原引发体系而引发其自身单体聚合的历程。     

哌嗪-二氧化硫电荷转移复合物引发的甲基丙烯酸甲酯光聚合

本文研究了哌嗪 (PPZ)与二氧化硫 (SO2 )电荷转移复合物 (CTC)的制备及其作为光引发剂引发甲基丙烯酸甲酯 (MMA)的聚合 ,发现PPZ/SO2 摩尔比对聚合速率影响甚大 .当PPZ/SO2 为 1∶2时 ,形成了具有潜在引发能力的复合物 (Ⅰ ) .Ⅰ引发MMA光聚合的动力学关系式为Rp =Kp [Ⅰ ] 0 .34[MMA] 1.0 6 ,表观活化能为 2 3 7kJ/mol.并对引发机理进行了探讨     

微波聚合制备单分散、超细聚甲基丙烯酸甲酯微球

在微波辐照下,通过甲基丙烯酸甲酯(MMA)的无乳化剂乳液聚合,制备出粒径单分散、超细聚甲基丙烯酸甲酯(PMMA)微球。微波显著缩短聚合诱导期,加快聚合反应,其部分原因是微波加快引发剂过硫酸钾(KPS)的分解。实验证明微波辐照下KPS的表观分解活化能(ED)由128.3kJ/mol降低到106.0kJ/mol。单体浓度是影响PMMA乳液粒子尺寸的主要因素,在[MMA]小于0.3mol/L时,平均粒径随单体浓度提高而线形增加;[MMA]为0.3～1.0mol/L时,平均粒径稳定在约200nm;之后随单体浓度进一步增加,乳液稳定性变差。引发剂浓度增加对平均粒径影响较小,但增大引发剂浓度可显著降低粒径分散度。选取[MMA]为0.23～0.3mol/L、[KPS]为3×10-3～6×10-3mol/L可以得到粒径200nm的单分散微球。以丙酮/水(体积比1/3)为反应介质,可制备出数均粒径45nm的PMMA纳米粒子。在体系中加入3.5×10-3mol/L的Cu2+,可制备出数均粒径67nm、单分散的PMMA纳米粒子。     

Laser-induced changes in silver metal nanoparticles incorporated in viscous media

The effect of laser pulse irradiation on silver metal nanoparticles in ethylene glycol and glycerol is studied and compared with the parallel processes in aqueous solutions. The influence of 355 nm laser pulse irradiation at the surface plasmon frequency and on the size of the silver nanoparticles is examined by UV-Vis absorption spectroscopy and by transmission electron microscopy. It appears that viscosity of the medium plays a crucial role for the stabilization of the melted particles in the absence of the stabilizer. In ethylene glycol containing PVP, fragmentation of particles was observed. In neat glycerol, similar excitation led to morphological changes as the nanoparticles fused to produce particles of larger size. The changes in reduction of shape and size are considered to occur through melting and vaporization of the silver nanoparticles.     

Structural and photocatalytic properties of the new solid photocatalyst In2BiTaO7

In₂BiTaO₇ was synthesized using the solid-state reaction method and its photocatalytic properties were investigated. The results of powder X-ray diffraction (XRD) indicated that the compound crystallizes in the pyrochlore-type structure, cubic system with space group Fd-3m. The lattice parameter is 10.6972(1) ?. In addition, the compound shows strong optical absorption in the visible region (λ > 420 nm) and the band gap of In₂BiTaO₇ was estimated to be about 2.47 eV. For the photocatalytic reaction, H₂ or O₂ evolution was observed from CH₃OH/H₂O or AgNO₃ solution respectively with In₂BiTaO₇ as the photocatalyst under visible light irradiation, indicating that In₂BiTaO₇ is responsive to visible light for splitting water. Furthermore, the catalyst remained photoactive in the wavelength range up to 510 nm. Photocatalytic degradation of methylene blue (MB) dye over the compound was further investigated under visible light irradiation. The results showed that complete removal of aqueous MB could be achieved after irradiation for 135 min over In₂BiTaO₇. Furthermore, under visible light irradiation In₂BiTaO₇ showed markedly higher catalytic activity compared to P-25 for MB photocatalytic degradation.     

预辐射苯乙烯形成过氧化物组分结构及其引发活性研究

本文研究了苯乙烯在空气存在下的γ辐照。用硅胶柱层析分离在辐射总剂量为5×10^4Gy, 辐射剂量率分别为2.9, 0.7, 0.5和0.3Gy/s的条件下形成的过氧化物,发现剂量率在0.5Gy/s以上时产物都可分成三种组分, 而组分布随剂量率不同而异。当剂量率为0.3Gy/s时, 产物只包含单一的, 相当于第二组分的过氧化物。对剂量率为0.7Gy/s时生成的三种过氧化物组分用红外光谱, 核磁共振谱和质谱进行了组分结构测定及其引发活性测定, 发现具有交替结构的第二组分有较强发引发活性, 它在较低温度和较短时间内就能引发苯乙烯聚合, 获得分子量166578的聚合物。它还能引发其它乙烯类单体聚合, 且聚合过程较用BPO引发剂平稳。     

CATALYTIC PROPERTIES OF POLYMER-STABILIZED COLLOIDAL METAL NANOPARTICLES SYNTHESIZED BY MICROWAVE IRRADIATION

Catalytic properties of polymer-stabilized colloidal metal nanoparticles synthesized by microwave irradiation were studied in the selective hydrogenation of unsaturated aldehydes, o-chloronitrobenzene and the hydrogenation of alkenes. The results show that nanosized metal particles synthesized by microwave irradiation have similar catalytic performance in selective hydrogenation of unsaturated aldehydes, better selectivity to o-chloroaniline in hydrogenation of o-chloronitrobenzene and higher catalytic activities in hydrogenation of alkenes, compared with metal clusters prepared by conventional heating. The same apparent activation energy (Ea = 29 kJ mol^-1) for hydrogenation of 1-heptene catalyzed with platinum nanoparticles prepared by both heating modes implied that the reaction followed the same mechanism.     

POLYMERIZATION OF N,N′-(PYROMELLITOYL)-BIS-L-LEUCINE DIACID CHLORIDE WITH HYDANTOIN DERIVATIVES BY MICROWAVE IRRADIATION

Facile and rapid polycondensation reactions of N,N′-(pyromellitoyl)-bis-L-leucine diacid chloride 1 with eight different derivatives of hydantoin compounds 2a-h were developed by using a domestic microwave oven in the presence ora small amount of polar organic medium such as o-cresol. The polycondensation reactions proceeded rapidly, compared with the conventional solution polycondensation, and was completed within 7-10 min, producing a series of novel optically active poly(amide-imide)s 3a-h with high yield and inherent viscosity of 0.35-0.65 dL/g. All of the above polymers were fully characterized by FT-IR, elemental analyses, inherent viscosity (ηiaa), solubility test and specific rotation. Some structural characterization and physical properties of these optically active poly(amide-imide)s are reported.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.