无孔单分散亲水性中强阳离子交换树脂的制备及其在蛋白质快速分离中的应用研究

以3.0μm无孔单分散亲水性交联聚甲基丙烯酸环氧丙酯树脂为基质,将其表面经新的化学方法改性后制备了一种新型的无孔中强阳离子交换色谱填料。详细考察了该无孔填料对标准蛋白分离性能,有机溶剂、pH、流动相盐种类和流速等对蛋白质保留的影响。实验结果表明,在流速为4 mL/min时,线性梯度时间在2.0 min内可快速分离4种标准蛋白,蛋白质的保留符合阳离子交换色谱规律。将其应用于快速纯化鸡蛋清中的溶菌酶,取得较好效果。     

单分散大孔亲水弱阳离子交换填料的制备及其对鱼精蛋白的分离纯化

以自制的5.0 μm单分散大孔亲水交联聚甲基丙烯酸环氧丙酯(PGMA/EDMA)微球为基质,对其表面进行化学改性,合成弱阳离子交换色谱填料(WCX)。详细考察了该填料对标准蛋白质的分离性能、表面亲水性能、稳定性和重现性以及流速对蛋白保留的影响。实验结果表明,该色谱填料对蛋白的分离性能、重现性及稳定性良好;在流速为3 mL/min时,采用线性梯度洗脱,6 min内可分离4种标准碱性蛋白质,以溶菌酶测定的该填料的动力学吸附容量为29.86 mg/g。将其用于鱼精蛋白的分离纯化,经反相高效液相色谱测定纯化后鱼精蛋白的纯度为99.2%;与商品Shodex IEC SP-825强阳离子交换色谱柱比较,纯化结果几乎一样。     

无孔单分散亲水性强阳离子交换固定相的制备及其在蛋白质快速分离中的应用研究

采用分散聚合法制备小颗粒种子及“一步种子溶胀聚合”法成功地制备了粒径为3.0 μm的无孔单分散亲水性交联聚甲基丙烯酸环氧丙酯树脂,其表面经水解、环氧化、再水解后与氯磺酸反应,制备了一种新型的强阳离子交换色谱填料（SCX）。详细考察了该填料对标准蛋白质的分离性能及流动相中盐的种类、有机溶剂、流速等对蛋白质保留的影响。实验结果表明,在流速为4 mL/min时,采用线性梯度洗脱,1.0 min内可快速分离4种标准蛋白质,蛋白质的保留符合阳离子交换色谱规律。将SCX应用于快速纯化鸡蛋清中的溶菌酶和猪心中的细胞色素-C,取得了较好的效果。     

快速弱阴离子交换无孔聚合物固定相的制备及用于蛋白质的高效液相色谱分离

将粒径为3.0μm无孔单分散亲水性交联聚甲基丙烯酸环氧丙酯树脂(PGMA/EDMA)的表面经不同的化学方法改性,制备了两种不同配基的弱阴离子交换(WAX-Ⅰ和WAX-Ⅱ)色谱填料。在同等色谱条件下,比较了两种填料对蛋白质的分离性能,发现WAX-Ⅰ型填料分离性能优于WAX-Ⅱ。详细考察了WAX-Ⅰ型弱阴离子交换色谱填料流动相pH值、流速及有机溶剂等对蛋白质保留的影响。实验结果表明,当流动相流速为3mL/min时,4种标准蛋白可在2min内基线快速分离,蛋白质的保留符合阴离子交换色谱规律。该填料可以用于生物工程产品的快速分离和纯化。     

端羟基硅胶与环状酸酐反应制备分离蛋白质的高效弱阳离子交换色谱填料

硅胶与含环氧基有机硅烷反应、产物与二元醇加成后再与环状酸酐反应,制得分离蛋白质的弱阳离子交换色谱填料。     

分离蛋白质的高效强阳离子交换色谱填料的合成及性能研究

带端羟基的大孔硅胶与氯磺酸反应制得分离蛋白质的强阳离子交换色谱填料。填料分离度高,蛋白质活性回收率大于７６％,可用于蛋白质及生物工程产品的分离。     

快速弱阴离子交换无孔聚合物固定相的制及用于蛋白质的高效液相色谱分离

将粒径为3.0 μm无孔单分散亲水性交联聚甲基丙烯酸环氧丙酯树脂(PGMA/EDMA)的表面经不同的化学方法改性,制备了两种不同配基的弱阴离子交换(WAX-Ⅰ和WAX-Ⅱ)色谱填料.在同等色谱条件下,比较了两种填料对蛋白质的分离性能,发现WAX-Ⅰ型填料分离性能优于WAX-Ⅱ.详细考察了WAX-Ⅰ型弱阴离子交换色谱填料流动相pH值、流速及有机溶剂等对蛋白质保留的影响.实验结果表明,当流动相流速为3mL/min时,4种标准蛋白可在2 min内基线快速分离,蛋白质的保留符合阴离子交换色谱规律.该填料可以用于生物工程产品的快速分离和纯化.     

单分散亲水两性离子交换树脂的制备及其在生物大分子分离中的应用

采用分散聚合与溶胀聚合相结合的方法及高分子溶液致孔技术, 成功地制备了粒径为5.0 μm大孔和超大孔结构的单分散亲水性交联聚甲基丙烯酸环氧丙酯树脂, 并进行了结构表征. 将该树脂经胺化后再与1,3-丙磺酸内酯反应, 得到一种新型的两性离子交换(强阳-强阴型)高效液相色谱填料. 研究了该填料对标准蛋白分离性能及流动相中有机溶剂、 流速和pH值对蛋白保留的影响. 实验结果表明, 在流速为3 mL/min时, 采用线性梯度洗脱, 在4.0 min内可同时快速基线分离3种酸性和2种碱性蛋白.     

一种混合模式反相强阳离子交换色谱固定相的制备及其保留机理的考察

采用一种简单的“混合配体”方法将辛基和磺酸基键合到硅胶表面,制备了辛基-磺酸基共同键合硅胶(OSS)材料。通过元素分析和吸附容量检测对OSS材料进行表征,证明辛基和磺酸基已成功键合到硅胶表面上。将该OSS硅胶材料作为混合模式反相强阳离子交换(RP/SCX)色谱固定相,在反相液相色谱(RPLC)流动相条件下,采用几种碱性探针分子定量地考察了该固定相的混合模式RP/SCX保留机理。通过改变流动相中缓冲盐的浓度,考察了溶质保留因子和盐浓度的对数和倒数的关系,得到了几种碱性探针分子在该混合模式OSS固定相上的单点和两点保留机理的数学模型。对两种数学模型的方程进行了线性拟合,结果表明两点保留机理更加符合实验的结果。此外,根据混合模式两点保留机理的数学方程,可以得到单一的疏水或离子交换作用力对总保留的影响,对混合模式色谱的实际分离应用可提供有价值的参考。     

以单分散交联聚甲基丙烯酸环氧丙酯树脂为基质的亲水性排阻色谱固定相的合成及其在生物大分子分离中的应用

以单分散交联聚甲基丙烯酸环氧丙酯树脂为基质,将该树脂经化学改性后得到亲水性良好的新型尺寸排阻色谱固定相,其表面羟基含量高达6．1mmol／g。详细评价了该改性后树脂对蛋白的质量回收率、亲水性、耐压性能及化学稳定性。用三羟甲基胺基甲烷(Tris)缓冲溶液(pH=7)为流动相,对蛋白质混合样的分离遵循体积排阻色谱分离机理。     

双功能聚合物基质阳离子交换固定相的制备及其在离子色谱中的应用

离子色谱是分离分析阳离子型化合物的重要手段之一。高效阳离子交换固定相的制备研究对离子色谱技术的发展具有重要的意义。该文以丙烯酸和顺丁烯二酸酐为单体,2-巯基乙基磺酸钠为巯基改性剂,提出了聚合物基质微球巯基改性自由基聚合修饰方法,用以制备新型双功能的阳离子交换固定相。该固定相以羧基和磺酸基为功能基,仅用简单的强酸淋洗液便可以实现常规阳离子的基线分离。利用色谱学模型,对金属离子和有机胺的保留行为进行了研究。采用梯度淋洗模式,可在24 min内实现10种阳离子的分离,表明固定相具有优异的色谱性能。"巯基-烯"修饰方法简单、高效。此外,通过调节巯基改性剂的比例能够实现对固定相交换能力的调控。     

Preparation of a novel lysozyme molecularly imprinted polymer using uniformly sized functionalized poly(glycidyl methacrylate) microspheres as the matrix and its application to lysozyme purification

A novel lysozyme imprinted polymer based on uniformly sized functionalized poly(glycidyl methacrylate) microspheres has been synthesized in aqueous solution using the surface imprinting technique. The microspheres were modified with hydroxyl ethyl methacrylate to allow for the introduction of polymerizable double bonds, with β‐cyclodextrin and acrylamide being grafted onto the surface as functional monomers. The selective recognition properties of the resulting molecularly imprinted polymers (MIPs) were investigated by HPLC. Various factors were also investigated in terms of their influence on the retention behaviors of the imprinted polymers, including the pH and salt concentration of the mobile phase. The binding capability properties of the MIPs were evaluated, and the P_GMA/EDMA‐MIPs showed a high adsorption capacity for lysozyme. Furthermore, this MIP was used to separate and enrich lysozyme from egg whites. The results revealed that the lysozyme surface‐modified MIP could be used to efficiently separate and purify lysozyme from egg whites. Copyright © 2013 John Wiley & Sons, Ltd.     

Loading controlled magnetic carbon dots for microwave‐assisted solid‐phase extraction: Preparation,extraction evaluation and applications in environmental aqueous samples

An adsorbent of carbon dot@poly(glycidyl methacrylate)@Fe₃O₄ nanoparticles has been developed for the microwave‐assisted magnetic solid‐phase extraction of polycyclic aromatic hydrocarbons in environmental aqueous samples prior to high‐performance liquid chromatography with UV/visible spectroscopy detection. Poly(glycidyl methacrylate) was synthesized by atom transfer radical polymerization. The chain length and amount of carbon dots attached on them can be easily controlled through changing polymerization conditions, which contributes to tunable extraction performance. The successful fabrication of the nano‐adsorbent was confirmed by transmission electronic microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy and vibrating sample magnetometry. The extraction performance of the adsorbent was evaluated by using polycyclic aromatic hydrocarbons as model analytes. The key factors influencing the extraction, such as microwave power, adsorption time, desorption time and desorption solvents were investigated in detail. Under the optimal conditions, the microwave‐assisted method afforded magnetic solid‐phase extraction with short extraction time, wide dynamic linear range (0.02–200 μg/L), good linearity (R² ≥ 98.57%) and low detection limits (20–90 ng/L) for model analytes. The adsorbent was successfully applied for analyzing polycyclic aromatic hydrocarbons in environmental aqueous samples and the recoveries were in the range of 86.0–124.2%. Thus, the proposed method is a promising candidate for fast and reliable preconcentration of trace polycyclic aromatic hydrocarbons in real water samples.     

以单分散树脂为基质的中强阳离子交换色谱填料的合成及应用

将粒径为8.0μm多孔单分散交联氯甲基苯乙烯-二乙烯苯树脂的表面经化学方法改性,得到了一种亲水性良好的中强阳离子交换色谱填料,详细考察了该改性后树脂的表面亲水性、对标准蛋白的分离性能、盐种类及盐浓度对蛋白保留行为的影响。实验结果表明,当流动相流速为3 mL/min时,四种标准蛋白可在3min内基线快速分离,蛋白质的保留符合阳离子交换色谱规律。该填料应用于鸡蛋清中溶菌酶快速分离纯化,取得较好效果。     

Grafting by in situ coupling of epoxy groups of a living copolymer with an anionic living polymer

A tetrahydrofuran (THF) solution of the living random copolymer of methyl methacrylate (MMA) and glycidyl methacrylate (GMA) was prepared by the living anionic copolymerization of the two monomers, using 1,1‐diphenylhexyllithium (DPHLi) as initiator, in the presence of LiCl ([LiCl]/[DPHLi]₀ = 3), at −50°C. The copolymer thus obtained has a controlled composition and molecular weight and a narrow molecular weight distribution. By introduction of an anionic living polystyrene (poly(St)) or anionic living polyisoprene (poly(Is)) solution into the above system at −30°C, a coupling reaction took place and a graft copolymer with a polar backbone and nonpolar side chains was produced. The solvent used in the preparation of the living poly(St) or poly(Is) affects the coupling reaction. When benzene was the solvent, a graft copolymer of high purity, controlled graft number and molecular weight, and narrow molecular weight distribution (M_w/M_n = 1.11–1.21) was obtained. In the coupling reaction, the living poly(St) reacted only with the epoxy groups and not with the carbonyls of the backbone polymer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 105–112, 1999     

Preparation,Characterization and Properties of Cellulose Acetate-Grafted-Poly(glycidyl methacrylate) Copolymers

The cellulose acetate-grafted-poly(glycidyl methacrylate) copolymers were synthesized successfully by free radical polymerization. The resulting copolymer was characterized by proton nuclear magnetic resonance (¹H-NMR), solid-state ¹³C-NMR, Fourier transform infrared spectroscopy (FTIR) and gel permeation chromatography (GPC). The crystallization behavior, thermal properties, specific particle surface area, moisture sorption behavior of the modified cellulose acetate were investigated by wide angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Brunauer-Emmett-Teller (BET) method and Dynamic Vapor Sorption (DVS) instrument. It was found that the poly(glycidyl methacrylate) (PGMA) grafting was effective in improving the water adsorption of cellulose acetate (CA) changing the specific surface area, and reducing the T_g of copolymers.     

生物碱分子表面印迹聚合物材料的设计与制备及其分子识别特性

采用巯基/偶氮二异丁腈(AIBN)表面引发体系,实现了甲基丙烯酸缩水甘油酯(GMA)在微米级硅胶微粒表面的引发接枝聚合,制得接枝微粒PGMA/SiO2;然后使接枝大分子PGMA的环氧基团与间二氨基苯磺酸钠(SAS)分子中的对位氨基发生开环反应,将苯磺酸钠基团键合在接枝大分子侧链,制得苯磺酸盐功能化的接枝微粒SAS-PGMA/SiO2。 在对功能微粒SAS-PGMA/SiO2与苦参碱分子间的相互作用进行考察研究的基础上,以戊二醛为交联剂,实施了苦参碱分子的表面印迹,制备了苦参碱分子表面印迹材料MIP-SASP/SiO2。 实验结果表明,在近中性溶液中,功能接枝微粒SAS-PGMA/SiO2与苦参碱分子间存在静电相互作用,以此为基础所设计与制备的表面印迹材料MIP-SASP/SiO2对苦参碱分子具有特异的识别选择性与优良的结合亲和性。 相对于对照物金雀化碱而言,该印迹材料对苦参碱的识别选择性系数为10.7。     

强阳离子交换整体柱的研制及其在电色谱多肽分离中的应用

以丙烯酸、2-丙烯酰胺-2-甲基丙磺酸为功能单体,N,N′-亚甲基双丙烯酰胺为交联剂,正十二醇、1,4-丁二醇及二甲基亚砜为致孔剂,偶氮二异丁腈为引发剂,原位聚合制备了丙烯酰胺类强阳离子交换整体柱。考察了驱动电压、有机调节剂、盐浓度、pH值等对电渗流的影响。结果表明,电渗流与驱动电压的线性关系良好,相关系数为0.9981;有机调节剂乙腈对电渗流的影响除与流动相的黏度有关外,还与固定相的溶胀有关,当浓度低时,电渗流随乙腈浓度的增加有反常的下降趋势;随着磷酸盐浓度逐渐增加,电渗流降低,与理论相符;在pH值为3～9范围内,电渗流基本上保持恒定,体现了整体柱使用酸碱范围宽的优越性。在优化的实验条件下,采用毛细管电色谱法在此整体柱上成功分离了5种多肽,体现了该类整体柱在多肽分离研究中的优势,为进一步将其应用于蛋白质分离研究打下了基础。     

Preparation of Medium Cation Exchange Stationary Phase of Polymeric Matrix and Their Chromatographic Properties

Based on the monodisperse poly（glycidyl methacrylate-co-ethylenedimethacrylate） beads （PGMA/EDMA） with macropore as a medium, a new hydrophilic medium cation exchange （MCX） stationary phase for HPLC was synthesized by a new chemically modified method. The stationary phase was evaluated with the property of ion exchange, separability, reproducibility, hydrophilicity, effect of salt concentration, salt types, column loading and pH on the separation and retention of proteins in detail. It was found that it follows ion exchange chromatographic （IEC） retention mechanism. The measured bioactivity recovery for lysozyme was （96 ± 5）%. The dynamic protein loading capacity of the synthesized MCX packings was 21.8 mg/g. Five proteins were almost completely separated within 6.0 min at a flow rate of 4 mL/min using the synthesized MCX resin. The MCX resin was also used for the rapid separation and purification of lysozyme from egg white with only one step. The purity and specific bioactivity of the purified lysozyme was found more than 95% and 70345 U/mg, respectively.