环境噪声对儿童短时记忆力和注意力的影响

通过实验室研究探讨了不同噪声源在不同声压级条件下对儿童短时记忆力和注意力的影响。在每一个实验中都选取了30名710岁的儿童作为被试,在他们完成相应认知任务的同时,用耳机随机播放3565 dBA的交通噪声、白噪声和空调噪声,考察各种噪声条件对被试认知成绩和主观烦恼度的影响。研究结果表明,噪声对儿童的影响主要体现在主观烦恼度的变化上,不同的噪声条件并没有引起作业成绩的显著差异。影响儿童主观烦恼度的主要因素是声压级,随着声压级的增大,儿童的烦恼度会增加,当声压级在4550 dBA时,儿童对噪声开始产生烦恼感,当声压级在6065 dBA时,儿童对噪声产生了较显著的烦恼感。声压级对儿童烦恼度的影响没有随着噪声源的改变而改变。在相同的噪声条件下,短时记忆力实验中儿童的主观烦恼度都高于注意力实验,说明随着认知过程复杂程度的增加,噪声引起的烦恼度会相应增加。      

Relationship between exposure to multiple noise sources and noise annoyance

Relationships between exposure to noise [metric: day-night level (DNL) or day-evening-night level (DENL)] from a single source (aircraft, road traffic, or railways) and annoyance based on a large international dataset have been published earlier. Also for stationary sources relationships have been assessed. Here the annoyance equivalents model concerning noise annoyance from combined sources and the underlying assumptions are presented. The model first translates the noise from the individual sources into the equally annoying sound levels of a reference source, road traffic, and then sums these levels giving total level L. The annoyance from the combined sources is found by substituting exposure L in the road traffic exposure-annoyance relationship. The most important assumption, independence of the contributions of the sources, is discussed. It appears that independence will be violated substantially only due to the effect of the presence or absence of a quiet side of building which is not incorporated in the model. For use in practice the application of the model is broken down in five steps. The step by step procedure can be used for the assessment of the total noise level and the associated total annoyance on the basis of the DNL or DENL values of the individual sources.     

Total annoyance from an industrial noise source with a main spectral component combined with a background noise

When living close to an industrial plant, people are exposed to a combination of industrial noise sources and a background noise composed of all the other noise sources in the environment. As a first step, noise annoyance indicators in laboratory conditions are proposed for a single exposure to an industrial noise source. The second step detailed in this paper involves determining total annoyance indicators in laboratory conditions for ambient noises composed of an industrial noise source and a background noise. Two types of steady and permanent industrial noise sources are studied: low frequency noises with a main spectral component at 100 Hz, and noises with a main spectral component in middle frequencies. Five background noises are assessed so as to take into account different sound environments which can usually be heard by people living around an industrial plant. One main conclusion of this study is that two different analyses are necessary to determine total annoyance indicators for this type of ambient noise, depending on the industrial noise source composing it. Therefore, two total annoyance indicators adapted to the ambient noises studied are proposed.     

Procedure for determining manufacturing defects in a diesel engine in a workshop

Customers’ demands regarding the quality level of automobile vehicles are constantly increasing. These demands include noise, vibration and harshness (NVH) quality as an important item.The main source of NVH in the vehicle is the engine and this is particularly the case for diesel engines. The design effort to reduce the emissions of noise and vibration transmitted to the vehicle’s driver could be lessened because of the assembly process variation and assembly errors.In the present paper, a procedure for assessing these variations or errors is suggested in order to maintain NVH performances within the limits of the design and achieve the quality level expected by customers.In order to achieve it, the measurement of the engine vibration level through three sensors allocated at strategic points is suggested. Some objective criteria based on the vibration level at certain frequencies are established to determine possible assembly defects as a final step of the assembly process.     

Statistical properties of laser-induced fluorescence signals

We point out the influence of the different noise sources which occur in the detection of the fluorescence signal induced by a laser in an atomic beam. We have developed a theoretical model which takes account of the atomic shot noise, photon noise, laser-frequency noise and a partition noise linked to the imperfect detection of the fluorescence photons. The calculations have been performed for two- and three-level atomic systems. We detail the own contribution of each noise source and give some predictions concerning the value of the fluorescence signal to noise ratio. We determine predominance domains of each noise source which depend on the values of key parameters such as the atomic flux intensity and the laser spectral linewidth. We particularly show that the laser-frequency noise, which induces a coupling between the emission of fluorescence photons by various atoms, leads to a saturation of the S/N ratio for intense atomic fluxes. Moreover, we point out that the optical pumping process associated with a three level atomic system leads to an interesting laser-noise filtering effect.     

匹配场处理舰船辐射噪声级估计方法

针对水声信道对舰船辐射噪声声传播的影响,进而导致声源级测量结果不准确的问题,提出了基于匹配场处理的舰船辐射噪声级估计方法。在海洋环境噪声为空间均匀高斯白噪声的假设下,当海洋环境参数已知、信噪比满足一定要求时,匹配场处理能有效地给出被测噪声源的位置信息及该位置处的能量响应。从能量估计角度出发,推导了声源位置处匹配场输出响应的能量修正因子计算公式,从理论上证明了匹配场处理在被测声源位置处输出响应与能量修正因子的乘积为真实声源级的最小方差无偏(MVU)估计。该方法首先选择合适的声场计算模型计算拷贝场向量,对接收到的辐射噪声信号进行匹配场处理,得出接收信号级和被测声源位置;其次利用该位置所对应的拷贝场向量替换能量修正因子公式中的真实信道传输函数以计算能量修正因子的估计值;最后由接收信号级与能量修正因子估计值相乘得出舰船辐射噪声声源级的MVU估计。针对典型的浅海水声信道,进行了计算机仿真试验,结果表明:该方法能有效地进行舰船辐射噪声测量,当信噪比满足一定要求时,测量得到的声源级与实际声源级相比,误差小于1 dB。      

Nonlinear total variation based noise removal algorithms

A constrained optimization type of numerical algorithm for removing noise from images is presented. The total variation of the image is minimized subject to constraints involving the statistics of the noise. The constraints are imposed using Lanrange multipliers. The solution is obtained using the gradient-projection method. This amounts to solving a time dependent partial differential equation on a manifold determined by the constraints. As t → ∞ the solution converges to a steady state which is the denoised image. The numerical algorithm is simple and relatively fast. The results appear to be state-of-the-art for very noisy images. The method is noninvasive, yielding sharp edges in the image. The technique could be interpreted as a first step of moving each level set of the image normal to itself with velocity equal to the curvature of the level set divided by the magnitude of the gradient of the image, and a second step which projects the image back onto the constraint set.     

高阻恒流LED产生亚泊松光的理论研究

本文研究高阻恒流源驱动的光发射二极管（ＬＥＤ）的输出光场的振幅噪声压缩与电，光量子效率，漏电流效应，泵浦残余噪声频率的关系，指出高阻恒流技术不仅使任意纵模产生振幅噪声压缩，而且由于仅在高阻恒流下各纵模间存在负量子相关，使得ＬＥＤ总输出光场的振幅噪声压缩加深。     

Compensation for source nonstationarity in multireference,scan-based near-field acoustical holography

Multireference, scan-based near-field acoustical holography is a useful measurement tool that can be applied when an insufficient number of microphones is available to make measurements on a complete hologram surface simultaneously. The scan-based procedure can be used to construct a complete hologram by joining together subholograms captured using a relatively small, roving scan array and a fixed reference array. For the procedure to be successful, the source levels must remain stationary for the time taken to record the complete hologram; that is unlikely to be the case in practice, however. Usually, the reference signal levels measured during each scan differ from each other with the result that spatial noise is added to the hologram. A procedure to suppress the effects of source level, and hence reference level, variations is proposed here. The procedure is based on a formulation that explicitly features the acoustical transfer functions between the sources and both the reference and scanning, field microphones. When it is assumed that source level changes do not affect the sources' directivity, a nonstationarity compensation procedure can be derived that is based on measured transfer functions between the reference and field microphones. It has been verified both experimentally and in numerical simulations that the proposed procedure can help suppress spatially distributed noise caused by the type of source level nonstationarity that is characteristic of realistic sources.     

一种能量比调控的有源噪声控制算法

在前馈有源噪声控制系统中,建模信号与控制信号相互影响,建模信号的引入会导致系统降噪性能变差。为了减小建模信号的影响,提出一种基于能量比调控的次级通道在线建模有源噪声控制算法。利用控制过程与建模过程的误差能量比构造步长调控函数,分别调节控制过程与建模过程的步长值,从而减弱两者的相互影响。在次级通道建模过程中,对建模步长值采取分段调控的方法,并通过建模步长值的变化来调节建模信号,从而提升系统降噪性能。仿真结果表明,对于低频噪声信号的有源噪声控制,相比已有算法,提出的算法能获得较快的建模收敛速度和较高的降噪量。     

浅海鼓虾噪声声源级测量方法

鼓虾噪声是声源级高、频带宽的冲激噪声,对浅海高频声呐和水下通信系统有很强干扰。本文针对实地测量鼓虾噪声声源级存在的多径传播和随机多声源问题,提出一种自动测量实际海域中鼓虾噪声声源级的方法。基于匹配场思想,在一个大孔径垂直线阵上对近场的大量鼓虾噪声进行自动定位。利用鼓虾噪声的强冲激特性,使用阈值检测的方法获得鼓虾信号的到达时间,同时将其幅度进行归一化,解决了各声源幅度动态范围相差大的问题。利用射线理论计算近场直达波到达时间作为拷贝场,对数据进行球面波波束形成,解决近场多途多声源定位问题。通过定位结果将接收鼓虾信号的峰峰值声压换算到距离声源1 m处,计算峰峰值声源级。在东海测量的结果显示,该海域的鼓虾噪声峰峰值声源级平均值为173 dB re: 1μPa@1 m,50%的测量值在168~175 dB re: 1μPa@1 m之间。      

A sound ray tracing algorithm in three-dimensional heterogeneous media based on wavefront traveltimes interpolation

A kind of three-dimensional（3-D） sound ray tracing algorithm in heterogeneous media is studied. This algorithm includes two steps： the first step computes the wavefront traveltimes forward; the second step traces the sound rays backward. In the first step, the computation of wavefront traveltimes at discrete grid points from the sound source, was found on Eikonal equation solutions and carried out by GMM （Group marching method） wavefront marching method based on level set. In the second step, sound ray tracing was proceeded gradually from the receiver to each cell towards the sound source, with wavefront traveltimes computed in the first step. Time values on arbitrary positions in each cuboid cell can be expressed by linear interpolation of wavefront traveltimes at the same cell＇s grid points. Thus, an algorithm of 3-D sound ray tracing in heterogeneous media is put forward. The simulation results indicate that this method can improve both the accuracy and the efficiency of 3-D sound ray tracing greatly.     

Choice of Japanese modifiers in noise annoyance scale during exposures to white noise

The linearity of a Japanese verbal scale of annoyance was estimated under real noise exposure. Young healthy adults, 32 male and 132 female were exposed to white noise of 30, 45, 60, 75 and 90 dBA in rooms where the exposure levels could be controlled according to contours. The series of noise exposure consisted of three components; white noise, pure-tone for conditioning and silence for evaluating noise. During the exposures the noisiness of each emission was evaluated with the verbal scale and a line-rating scale. The data showed a significant correlation of about 0.9 between the exposure level and the line length on the rating scale. The regression line of the noise level to the line length exhibited a reasonable locus of zero on the line length at the ambient noise level. The rank correlation between the selected modifier and the noise level was nearly 0.8 . When the five modifiers were converted to 1-5 points, respectively, the regression of the line length to the selected modifier revealed an adequate and consistent fitness (coefficient of determination was >0.8). The results suggest that the scale can be used as an equally divided linear scale in community noise research.     

Generalized reference fields and source interpolation for the difference formulation of radiation transport

In the difference formulation for the transport of thermally emitted photons the photon intensity is defined relative to a reference field, the black body at the local material temperature. This choice of reference field combines the separate emission and absorption terms that nearly cancel, thereby removing the dominant cause of noise in the Monte Carlo solution of thick systems, but introduces time and space derivative source terms that cannot be determined until the end of the time step. The space derivative source term can also lead to noise induced crashes under certain conditions where the real physical photon intensity differs strongly from a black body at the local material temperature.In this paper, we consider a difference formulation relative to the material temperature at the beginning of the time step, or in cases where an alternative temperature better describes the radiation field, that temperature. The result is a method where iterative solution of the material energy equation is efficient and noise induced crashes are avoided. We couple our generalized reference field scheme with an ad hoc interpolation of the space derivative source, resulting in an algorithm that produces the correct flux between zones as the physical system approaches the thick limit.     

Effects of noise levels and call types on the source levels of killer whale calls

Accurate parameter estimates relevant to the vocal behavior of marine mammals are needed to assess potential effects of anthropogenic sound exposure including how masking noise reduces the active space of sounds used for communication. Information about how these animals modify their vocal behavior in response to noise exposure is also needed for such assessment. Prior studies have reported variations in the source levels of killer whale sounds, and a more recent study reported that killer whales compensate for vessel masking noise by increasing their call amplitude. The objectives of the current study were to investigate the source levels of a variety of call types in southern resident killer whales while also considering background noise level as a likely factor related to call source level variability. The source levels of 763 discrete calls along with corresponding background noise were measured over three summer field seasons in the waters surrounding the San Juan Islands, WA. Both noise level and call type were significant factors on call source levels (1-40 kHz band, range of 135.0-175.7 dB(rms) re 1 [micro sign]Pa at 1 m). These factors should be considered in models that predict how anthropogenic masking noise reduces vocal communication space in marine mammals.     

条纹管激光成像雷达条纹图像噪音分析与处理

从条纹管激光成像雷达的结构和成像原理出发,讨论了各种噪音来源、噪音特点、影响因素、对最终图像的贡献大小和抑制方法.通过条纹管激光成像雷达阶梯目标扫描成像实验结果分析,噪音源理论分析得到了验证.结合条纹图像处理的特殊目的,通过对比几种边界保持类平滑滤波算法,得出K近邻平滑均值滤波器具有更低的时间复杂度和空间复杂度和更好的滤噪效果,当取N=7,K=25时,可以在允许的处理时间内极大地提高条纹图像信噪比,然后,利用阈值算法有效滤除了背景噪音,最终成功地从复杂的噪音中提取到了条纹数据.这项工作为后续的目标像重构奠定了基础,并指出了下一步工作的方向和重点.     

An investigation into the noise generation of CPAP devices: Experimental and numerical study

Continuous positive airway pressure (CPAP) devices are popularly used for obstructive sleep apnoea (OSA) treatment. However, the noise level emission from these devices has been identified as a potential factor for patient’s discomfort and rejection. There is a need to obtain information on the noise characteristics and source locations in order to tackle the most serious noise source within these devices. A typical CPAP device was used for the investigation and its sound characteristics and sound power levels were determined. The noise generated from a centrifugal fan was also independently investigated to address its contribution to the overall noise of the device. Frequency analysis suggested that the noise generated from both the CPAP device and the fan is broadband in nature with discrete peaks containing rotational and non-rotational components. The broadband components were then studied in detail using numerical simulation approach. Computational aeroacoustics (CAA) method with hybrid approach was used to a three-dimensional (3-D) CPAP fluid model to predict the aerodynamic and aeroacoustics behaviours of the device. This showed a complicated flow structure involving flow separation, rotation, and vortices in several locations which resulted in high level of flow turbulence inside the device. The turbulent components were used to estimate the broadband noise level at source using the broadband noise source (BNS) models. It shows the most critical location is at the fan region and at the fan inlet.     

Predicted effects of a speed bump on light vehicle noise

A speed bump reduces traffic noise levels during the deceleration phase and increases them during the acceleration phase. The net effect of a speed bump on noise from a light vehicle is assessed by means of the concept of noise energy density, S. This is a function of the instantaneous distance between the vehicle and the bump, S(x). To determine the function S(x) explicitly, five measurements of the sound exposure level, for each vehicle, are needed. It is assumed that the noise from each vehicle is generated by a single non-directional point source and propagates without vertical-surface reflections. An example prediction is presented based on measurements of sound exposure levels due to passenger cars.     

Delayed pulse referencing for cancellation of polychromatic beating noise in grating spectrometry

We use a grating spectrometer with a time resolution of 17.4 μs and a spectral resolution of 5 GHz to analyze a superluminescent source operating near 1350 nm. Polychromatic beating noise is shown to dominate single-shot measurements of the source spectrum; the observed noise level is within 19% of the theoretical beating noise level. By adopting a delayed pulse referencing scheme used previously with wavelength-swept sources, the beating noise is virtually eliminated, allowing spectral measurements limited only by shot noise and camera read noise.     

南海深海风生噪声特性分析及其噪声源模型修正

基于2015年秋季南海深海区域43天的观测噪声与同步风速预报数据,研究南海风占主导海洋环境噪声风关特性,并对风生噪声源级公式进行修正。本地风速在3~14 m/s范围内变化时,在频段0.5~1.28 kHz,噪声强度近似正比于风速对数的2倍。据此关系,获得不同风速条件下的风生噪声谱级。将Harrison风生噪声源级公式和海面噪声传输模型结合,构建深海风生噪声数值计算模型,通过求取最优的风生噪声源级公式系数项,使得在风占主导频段和风速范围内实验谱级与数值结果误差平方和最小,对Harrison风生噪声源级公式进行修正,并使其适用频段范围拓宽两倍。最后,利用南海其它区域实验数据检验模型的适用性,结果表明,模型预报噪声级与实验值吻合度较高,可供预报南海风生海洋环境噪声级实际应用参考。