Formation of nanocrystalline TiO2 by 100 MeV Au

Nanocrystalline TiO₂ structures are formed by irradiation of 100 MeV Au⁸⁺ ion beam on amorphous thin films of TiO₂. Surface morphology of the nanocrystals is studied by Atomic Force Microscopy (AFM). Amorphous to nanocrystalline phase transformation is identified by Glancing Angle X-ray Diffraction (GAXRD) and Raman spectroscopic studies. Optical characterization is carried out by UV-VIS spectroscopy technique. Blue shift observed in absorption band edge indicates the formation of nanophase TiO₂ after irradiation. The impinging swift heavy ion (100 MeV Au⁸⁺) induces nucleation of nanoparticles along the ion trajectory through inelastic collisions of the projectile with electrons of the material. It is observed that the shape and size of nanoparticles formed is dependant on the irradiation fluence.     

Investigation on SERS of different phase structure TiO2 nanoparticles

In this paper, anatase and rutile TiO₂ nanoparticles as well as their mixed crystal phase structure TiO₂ nanoparticles were synthesized by a sol‐hydrothermal method, and were served as active substrates for surface‐enhanced Raman scattering (SERS) study. The results show that the 4‐mercaptobenzoic acid probe molecules exhibit different degree SERS enhancements on the surface of different phase structure TiO₂ nanoparticles. The mixed crystal structure TiO₂ with an appropriate proportion of anatase and rutile phase is favourable to SERS enhancement of adsorbed molecules. These are mainly attributed to the contributions of the TiO₂‐to‐molecule charge transfer mechanism and the mixed crystal effect. Copyright © 2015 John Wiley & Sons, Ltd.     

银/二氧化钛核壳纳米颗粒对碲化镉纳米晶的荧光增强研究

利用新合成的复合纳米结构银/二氧化钛核壳纳米颗粒,研究了金属银纳米颗粒对碲化镉纳米晶层荧光的增强情况.结果表明,这种新型复合金属纳米结构能极大地增强发光纳米晶层的荧光强度.银/二氧化钛核壳纳米颗粒是以水合肼、硝酸银和四异丙氧基钛为原材料,利用胶体化学法在水溶液中合成.透射电子显微镜图片表明这种新合成的银/二氧化钛纳米材料基本上呈球形,有较为明显的核壳结构,中间黑色的核是银纳米颗粒,外层颜色较浅部分是二氧化钛壳层.另外,包裹二氧化钛壳层后,银纳米颗粒的表面等离子吸收带从409 nm红移至430 nm,也证实了这种新型核壳纳米材料的形成.将此合成方法得到的银/二氧化钛纳米颗粒和碲化镉纳米晶用旋转涂覆方法进行直接组合后,得到了银纳米颗粒对碲化镉纳米晶荧光的明显增强,并对其增强的物理过程进行了讨论.这种能够增强荧光团发光的新型复合银纳米结构将在发光器件、荧光成像、生物探测等方面具有一定的应用价值.     

Titanium dioxide-coated nanofibers for advanced filters

This article reports on titanium dioxide (TiO₂)-coated nanofibers deposited on a filter surface by the electrospinning process. After depositing a micrometer-thick film of polyamide 11 nanofibers on polypropylene fabric, TiO₂ nanoparticles can be directly electrosprayed onto the nanofibers. X-ray diffraction and Raman spectroscopy showed minimal change in the phase composition (anatase and rutile) and no change in the particle size of nanocrystalline TiO₂ after coating. Scanning electron microscopy demonstrated that nanofibers were uniformly coated by titanium dioxide nanoparticles without agglomeration. TiO₂-coated filters showed excellent photocatalytic-bactericidal activity and photo-induced hydrophilicity.     

Optical investigation on sulfur-doping effects in titanium dioxide nanoparticles

The sulfur-doping (S-doping) effects in TiO₂ nanoparticles are investigated by means of Raman spectroscopy and UV–Vis spectroscopy with different S-doping levels (10 and 50%). Raman spectra indicate that the rutile and anatase phases dominate for the low S-doped (10%) and high S-doped (50%) TiO₂ nanoparticles, respectively. The variation of phase with different S-doping levels has been ascribed to the different S-doping processes into TiO₂ nanoparticles. In addition, an extra absorption band is observed in both the S-doped TiO₂ nanoparticles. With increasing S-doping level from 10 to 50%, the extra absorption band shows a blue-shift from 470 to 445 nm, which may be ascribed to the variation of phase from rutile to anatase for TiO₂.     

Deposition of Au/TiO2 film by pulsed laser

Au nanoparticles, which were photoreduced by a Nd:YAG laser in HAuCl₄ solution containing TiO₂ colloid and accompanied by the TiO₂ particles, were deposited on the substrate surface. The film consisting of Au/TiO₂ particles was characterized by the absorption spectra, scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. The adhesion between the film and substrate was evaluated by using adhesive tape test. It was found that the presence of TiO₂ dramatically enhanced the adhesion strength between the film and the substrate, as well as the deposition rate of film. The mechanism for the deposition of Au/TiO₂ film was also discussed.     

Surface‐enhanced Raman scattering investigations on silver nanoparticles deposited on alumina and titania nanotubes: influence of the substrate material on surface‐enhanced Raman scattering activity of Ag nanoparticles

Silver nanoparticles deposited on various ‘inert’ porous materials (mainly Al₂O₃ and TiO₂) are often used as substrates for surface‐enhanced Raman scattering (SERS) measurements. In this study, we used the sputter deposition technique to cover tubular arrays of Al₂O₃ and TiO₂ with Ag nanoparticles. Raman spectra of pyridine (as a probe molecule) and of two selected dyes (5‐(4‐dimethylaminobenzylidene)rhodanine and 5‐(4‐(dimethylamino)benzylidene)‐3‐(3‐methoxypropyl)rhodanine) adsorbed on fabricated Ag/TiO₂‐n/Ti and Ag/Al₂O₃‐n/Al substrates were measured. We found that the SERS spectra of pyridine adsorbed on Ag nanoparticles deposited on an Al₂O₃‐n/Al substrate are distinctly different from those measured for an Ag/TiO₂‐n/Ti composite. Similar effects were observed for dyes adsorbed on the surface of both composites. The spectral differences between two kinds of composites (Ag/TiO₂‐n/Ti and Ag/Al₂O₃‐n/Al) are discussed in terms of (1) the modified electronic structure of the Ag nanoparticles due to their interaction with different substrate materials and (2) the different atomic topology of the metal particles thus deposited on the surfaces of the substrates. Composite samples were also studied with the aid of scanning electron microscopy (SEM) and Auger electron spectroscopy (AES) to reveal their characteristic morphological and chemical features. Copyright © 2012 John Wiley & Sons, Ltd.     

Light-induced antifungal activity of TiO2 nanoparticles/ZnO nanowires

Antifungal activity of TiO₂/ZnO nanostructures under visible light irradiation was investigated. A simple chemical method was used to synthesize ZnO nanowires. Zinc acetate dihydrate, Polyvinyl Pyrrolidone and deionized water were used as precursor, capping and solvent, respectively. TiO₂ nanoparticles were deposited on ZnO nanowires using an atmospheric pressure chemical vapor deposition system. X-ray diffraction pattern of TiO₂/ZnO nano-composite has represented the diffraction peaks relating to the crystal planes of the TiO₂ (anatase and rutile) and ZnO. TiO₂/ZnO nanostructure antifungal effect on Candida albicans biofilms was studied and compared with the activity of TiO₂ nanoparticles and ZnO nanowires. The high efficiency photocatalytic activity of TiO₂ nanoparticles leads to increased antifungal activity of ZnO nanowires. Scanning electron microscope was utilized to study the morphology of the as prepared nanostructures and the degradation of the yeast.     

Photostabilization of dye on anatase titania nanoparticles by polymer capping

Nanoparticles of titanium dioxide (TiO₂) were prepared by the sol-gel method and characterized by XRD, TEM, FTIR and UV-Visible absorption spectroscopy for their structure, morphology and particle size. Organization, stabilization of the nanoparticles of TiO₂ from further growth, and partially inhibiting the photodegradation was achieved by capping with polymers. Photodegradation of dye on TiO₂ nanoparticles encapsulated in different polymers has been studied by diffused reflectance UV spectroscopy. The role of the polymer on the photodegradation of TiO₂ has been compared and explained.     

Core–shell nanostructures and nanocomposites of Ag@TiO2: effect of capping agent and shell thickness on the optical properties

Two different shell-forming reagents viz. titanium isopropoxide and titanium hydroxyacylate, have been employed to obtain core–shell nanostructures of Ag@TiO₂. However, nanocomposites were formed when the shell-forming agent, titanium isopropoxide, was added before breaking the micelles. Titanium hydroxyacylate has been used for the first time as a shell-forming agent which resulted in uniform core–shell structures of Ag@TiO₂ with core diameter ranging from 10 to 40 nm and a shell thickness of 10–50 nm. The low rate of hydrolysis of titanium hydroxyacylate than titanium isopropoxide (used in other methods) appears to be responsible for the uniform shell thickness. The presence of capping agent (2-mercaptoethanol) disrupts the formation of a uniform shell structure of Ag@TiO₂. HRTEM, IR, and XPS studies of Ag@TiO₂ synthesized using capping agent show the formation of Ag₂S coated with an amorphous layer of TiO₂. A red shift of 25 and 10 nm was observed in the surface plasmon band of silver for Ag@TiO₂ core–shell structures (compared with that of silver nanoparticles) synthesized using titanium hydroxyacylate and titanium isopropoxide, respectively. The presence of capping agent (2-mercaptoethanol) masks the surface plasmon peak. Photoluminescence studies show an increase in the emission intensity for the core–shell structures when compared to that of TiO₂ nanoparticles.     

Nanotitania-coated multi-walled carbon nanotube composite by facile colloidal processing route for photocatalytic applications

Multi-walled carbon nanotubes (MWCNTs) and titanium dioxide nanocomposites (MWCNTs/TiO₂) were fabricated by a simple novel colloidal processing route and tested as a photocatalyst for degradation of methylene blue under UV irradiation. The novel idea behind this work is to make MWCNTs and TiO₂ nanoparticle suspensions separately highly oppositely charged and utilize the electrostatic force of attraction between two entities to deposit nanotitania onto MWCNTs surface. Particle charge detector, scanning electron microscopy, transmission electron microscope, energy dispersive X-rays, X-rays diffraction (XRD), and Raman spectroscopy were used to characterize the composite. XRD and Raman spectroscopic analysis showed the crystalline structure of deposited TiO₂ over MWCNTs surface structure as anatase phase. It was found that MWCNTs/TiO₂ composite structure have much higher photocatalytic activity compared to TiO₂ nanoparticles. The composite material developed may find potential applications in the degradation of organic pollutants in aqueous medium under UV irradiation.     

Preparation and characterisation of a stable silver colloid for SER(R)S spectroscopy

A method for the reproducible preparation of a silver colloid with strong surface‐enhanced Raman scattering (SERS) properties, good stability with a zeta potential of −55 mV and a shelf life exceeding 1 year is reported. The mean particle size is 20 nm with a narrow size distribution of 10–30 nm. The colloid is produced by the reduction of silver nitrate with hydroxylamine phosphate to give a negatively charged phosphate surface on the silver particles. This is an ultrafast room temperature reaction and with controlled rapid addition and dispersion of reagents, very reproducible batches of colloid can be prepared making it suitable for commercial applications of Surface enhanced resonance Raman scattering(SER(R)S) spectroscopy. The stability of the colloid is attributed to the extremely low solubility product (K_sp) of silver phosphate. Characterisation and stability study data for this colloid have been obtained by ultraviolet–visible spectroscopy, transmission electron microscopy, energy dispersive X‐ray spectroscopy, particle size analysis and SERS analyses using a 514 nm laser on a Raman spectrometer. A SERS method to detect and to identify riboflavin in a vitamin B complex tablet is reported to illustrate a SERS application based upon the use of this silver colloid. Copyright © 2013 John Wiley & Sons, Ltd.     

硼(氮、氟)掺杂对TiO2纳米颗粒光学性能的影响

利用X射线衍射谱、拉曼光谱和紫外-可见光吸收光谱研究了硼(氮、氟)掺杂对TiO₂纳米颗粒光学性能的影响.X射线衍射谱和拉曼光谱结果表明,掺硼(氮、氟)对TiO₂纳米颗粒的锐钛矿相晶体结构无明显影响,而其锐钛矿晶格出现畸变(c/a值增大),这被归因于掺杂原子对TiO₂纳米颗粒表面氧原子缺位沿晶格c轴方向的占据.另外,掺硼(氮、氟)TiO₂纳米颗粒吸收带红移与TiO相似文献   

Preparation and photocatalytic activity of bicrystal phase TiO2 nanotubes containing TiO2-B and anatase

Bicrystal phase TiO₂ nanotubes (NTS) containing monoclinic TiO₂-B and anatase were prepared by the hydrothermal reaction of anatase nanoparticles with NaOH aqueous solution and a heat treatment. Their structure was characterized by XRD, TEM and Raman spectra. The results showed that the bicrystal phase TiO₂ NTS were formed after calcining H₂Ti₄O₉·H₂O NTS at 573 K. The bicrystal phase TiO₂ NTS exhibit significantly higher photocatalytic activity than the single phase anatase NTS and Dessuga P-25 nanoparticles in the degradation of Methyl Orange aqueous solution under ultraviolet light irradiation, which is attributed to the large surface and interface areas of the bicrystal phase TiO₂ NTS.     

In situ Radical Copolymerization in Presence of Surface‐Modified TiO2 Nanoparticles: Influence of a Double Modification on Properties of Unsaturated Polyester (UP) Nanocomposites

In the preparation of nanocomposites, there is competition between the dispersion of nanoparticles and the formation of agglomerates. In this study, radical copolymerization of ethyl acrylate and methyl methacrylate initiated by 2,2‐azobis (isobutyro) nitrile (AIBN) was performed, in the presence of titanium oxide (TiO₂) nanoparticles modified in a new approach; a good dispersion of the nanoparticles in the unsaturated polyester (UP) matrix was obtained. The TiO₂ nanoparticles were exposed to 3‐(methacryloxy) propyl trimethoxy silane as the coupling agent. The presence of coupling agent‐grafted TiO₂ nanoparticles in the copolymerization process resulted in the formation of a polymeric layer on the surface of the TiO₂ nanoparticles (doubly modified‐TiO₂). The grafting of coupling agent molecules and consequently copolymer macromolecular chains onto the surface of TiO₂ nanoparticles was investigated using Fourier transform infrared (FTIR) analysis. It found that the formation of an acrylate layer on the surface of nanoparticles was successful. Then, unsaturated polyester (UP)/TiO₂ nanocomposites were prepared. The morphology was studied using transmission electron microscopy (TEM). Mechanical properties and ultraviolet visible (UV/VIS) spectroscopy of various samples, including the doubly modified‐TiO₂ nanoparticles, with different nanoparticle inclusions and the unmodified‐TiO₂ nanoparticles, were also investigated. The results showed the doubly modified‐TiO₂ nanoparticles, compared to those of unmodified‐TiO₂, had better nanoparticle dispersion causing improvement in the mechanical properties and UV shielding.     

Low frequency Raman scattering of anatase titanium dioxide nanocrystals

TiO₂ nanoparticle of size 7.8 nm are synthesized by wet chemical route and characterized by low-frequency Raman scattering (LFRS), transmission electron microscopy (TEM) and X-ray diffraction. The low frequency peaks in the Raman spectra have been explained using the Lamb's theory that predicts the vibrational frequencies of a homogeneous elastic body of spherical shape. Our results show that the observed low-frequency Raman scattering originates from the spherical (l=0) and quadrupolar vibrations (l=2) of the spheriodal mode due to the confinement of acoustic vibrations in TiO₂ nanoparticles. In addition to the low-frequency peak due to the vibrational quadrupolar and spheriodal modes, a band is also observed, which is assigned to the Raman forbidden torsional l=2 mode originating from the near spherical shape of the TiO₂ nanoparticles. The size distribution is also obtained from LFRS, which is in good agreement with TEM.     

Size-controllable synthesis of functional heterostructured TiO<Subscript>2</Subscript>–WO<Subscript>3</Subscript> core–shell nanoparticles

Mono and bicomponent TiO₂ and WO₃ nanoparticles were synthesized inside Vycor^® glass pores, by cycles of impregnation of the glass with the respective oxide precursor followed by its thermal decomposition. The impregnation-decomposition cycle (IDC) methodology promoted a linear mass increase of the glass matrix, and allowed tuning the nanoparticle size. X-ray diffraction and Raman spectroscopy data allowed identifying the formation of TiO₂ as anatase phase, while WO₃ is a mixture of the γ-WO₃ (monoclinic) and δ-WO₃ (triclinic) phases. High resolution transmission electron microscopy images revealed that for 3, 5, and 7 IDC, the TiO₂ nanoparticles obtained presented average diameters of 3.4, 4.3, and 5.1 nm, and the WO₃ nanoparticles have 2.9, 4.6, and 5.7 nm sizes. These TiO₂ and WO₃ monocomponent nanoparticles were submitted to IDC with the other oxide precursor, resulting in bicomponent nanoparticles. The broadening and shift of the Raman bands related to titanium and tungsten oxides suggest the formation of hetero-structure core–shell nanoparticles with tunable core sizes and shell thicknesses.     

Hydrothermal synthesis of CdTe quantum dots–TiO2–graphene hybrid

CdTe–TiO₂–graphene nanocomposites were successfully synthesized via a simple and relatively general hydrothermal method. During the hydrothermal environment, GO was reduced to reduced graphene oxide (RGO), accompanying with the anchoring of TiO₂ nanoparticles on the surface of RGO. In the following process, CdTe quantum dots (QDs) were then in situ grown on the carbon basal planes. The morphologies and structural properties of the as-prepared composites were characterized by X-ray diffraction, Raman spectroscopy, transmission electron microscopy and fluorescent spectroscopy. It is hoped that our current work could pave a way towards the fabrication of QDs–TiO₂–RGO hybrid materials.     

噻菌灵在纳米银胶表面吸附的表面增强拉曼光谱研究

噻菌灵(TBZ)属苯并咪唑类杀菌剂,容易在水果、蔬菜及相应的果蔬饮品中形成有毒残留。基于密度泛函理论(DFT)的量子化学计算方法和表面增强拉曼光谱(SERS)技术,从理论和实验角度系统研究了噻菌灵在纳米银胶粒子表面的吸附行为和增强效应。采用柠檬酸钠还原法制备了具有表面增强拉曼散射活性的银纳米溶胶,并对水相的噻菌灵进行了SERS光谱研究。利用TBZ-Ag₄四种吸附模型对噻菌灵与银纳米溶胶的相互作用进行了理论分析。结合FT-Raman光谱和B3LYP/6-311G(d)理论计算的结果,借助Gaussian View5.0程序的图形化功能,对噻菌灵分子的振动模式、FT-Raman振动光谱和SERS光谱进行了系统的指认。研究结果表明：噻菌灵分子的所有原子在同一平面上,属于Cs对称性;其在银纳米溶胶表面具有十分显著的表面增强拉曼活性;分子中的S原子与银胶粒子发生吸附作用,并通过该分子的长轴方向垂直于银纳米银胶表面;可利用SERS光谱方法对痕量的噻菌灵进行快速检测。为研究噻菌灵的特性以及其快速检测提供了理论和实验依据。     

Adsorption study of 4‐MBA on TiO2 nanoparticles by surface‐enhanced Raman spectroscopy

In this paper, the adsorption of 4‐mercaptobenzoic acid (4‐MBA) on TiO₂ nanoparticles was studied mostly by surface‐enhanced Raman spectroscopy (SERS) and UV‐vis spectroscopy, at different pH values as well as under different temperatures and concentrations. The results show that the 4‐MBA molecules are bonded to the TiO₂ surface both through the sulfur atoms and COO⁻ groups at neutral or alkaline pH, but only through the sulfur atom at acidic pH. Furthermore, the 4‐MBA molecules possess high adsorptive stability on TiO₂ at a comparatively high temperature (150 °C). Concentration‐dependent SERS experiments show that the saturation concentration for 4‐MBA adsorbed on TiO₂ is about 10⁻³ M in natural case (pH = 6). Copyright © 2009 John Wiley & Sons, Ltd.