Isothermal titration calorimetric study on the interaction of apo-human transferrin with sodium n-dodecyl sulfate

Isothermal titration calorimetry (ITC) was utilized at conditions close to physiologic (50 mM HEPES buffer, pH 7.4 and 160 mM NaCl) and at various temperatures (20, 25, 30, 35, and 40 °C) to evaluate the enthalpy and heat capacity changes for the interactions of sodium n-dodecyl sulfate (SDS) as an anionic surfactant with apo-human transferrin (apo-hTf). The obtained results are very informative due to importance of heat capacity change as a major thermodynamic quantity that is one of the richest potential sources of information in physical terms. The obtained precise curves and heat capacity curves were interpreted in terms of molecular events such as specific and non-specific binding and the unfolding process. A three step mechanism for the interaction of SDS with apo-hTf has been figured out on basis of ITC studies: $ N \leftrightarrow I_{1} \leftrightarrow I_{2} \leftrightarrow D $ , where N, I, and D correspond to native, partially unfolded, and denatured states, respectively.     

Interactions between poly(acrylic acid) and sodium dodecyl sulfate: isothermal titration calorimetric and surfactant ion-selective electrode studies

Interaction between a monodispersed poly(acrylic acid) (PAA) (M(W) = 5670 g/mol, M(w)/M(n) = 1.02) with sodium dodecyl sulfate (SDS) was investigated using isothermal titration calorimetry (ITC), ion-selective electrode (ISE), and dynamic light scattering measurements. Contrary to previous studies, we report for the first time evidence of interaction between SDS and PAA when the degree of neutralization (alpha) of PAA is lower than 0.2. Hydrocarbon chains of SDS cooperatively bind to apolar segments of PAA driven by hydrophobic interaction. The interaction is both enthalpy and entropy favored (deltaH is negative but deltaS is positive). In 0.05 wt % PAA solution, the SDS concentration corresponding to the onset of binding (i.e., CAC) is approximately 2.4 mM and the saturation concentration (i.e., C(S)) is approximately 13.3 mM when alpha = 0. When PAA was neutralized and ionized, the binding was hindered by the enhanced electrostatic repulsion between negatively charged SDS and PAA chains and improved solubility of the polymer. With increasing alpha to 0.2, CAC increases to approximately 6.2 mM, C(S) drops to 8.6 mM, and the interaction is significantly weakened where the amount of bound SDS on PAA is reduced considerably. The values of CAC and C(S) derived from different techniques are in good agreement. The binding results in the formation of mixed micelles on apolar PAA coils, which then expands and dissociates into single PAA chains. The majority of unneutralized PAA molecules exist as single polymer chains stabilized by bound SDS micelles in solution after the saturation concentration.     

Laser light scattering and isothermal titration calorimetric studies of poly(ethylene oxide) aqueous solution in presence of sodium dodecyl sulfate

The aqueous solution of poly(ethylene oxide) (PEO) in the presence of different concentrations of sodium dodecyl sulfate (SDS) was examined by laser light scattering and isothermal titration calorimetric techniques. A small fraction of PEO aggregates were found to coexist with unimeric PEO chains in dilute solution. The presence of monovalent salt does not alter the hydrodynamic properties of PEO in aqueous solution. Addition of a monovalent anionic surfactant, such as SDS, induces cooperative binding of surfactant monomers to PEO backbones at SDS concentrations ranging from 4.0 mM (critical aggregation concentration) to 16.5 mM (saturation concentration). The hydrodynamic radius of PEO unimers decreases initially and then increases with SDS concentration, resulting from the structural reorganization of the PEO/SDS complex. Beyond the saturation concentration, the hydrodynamic radii of PEO/SDS complex are independent of SDS concentration.     

Isothermal titration calorimetric studies on the temperature dependence of binding interactions between poly(propylene glycol)s and sodium dodecyl sulfate

Isothermal titration calorimetry (ITC) is a sensitive research tool for examining the binding interactions between surfactant and polymer where the differential enthalpy during the binding process is monitored. In addition to the critical micelle concentration (cmc) and the micellization enthalpy (deltaHm), the effective micellar charge fraction (beta) of the ionic surfactant micellization process can also be determined from ITC thermograms. Poly(propylene glycol) (PPG) exhibits a lower critical solution temperature (LCST) ranging from 15 to 42 degrees C, depending on the molecular weights. We report, for the first time, the binding interactions between sodium dodecyl sulfate (SDS) and 1,000, 2,000 and 3,000 Da PPGs, where different binding mechanisms are in operation, depending on the temperature. At temperatures lower than the LCST, the binding interactions are similar to those of SDS and low molecular weight poly(ethylene glycol)s (MW < 3500 Da). At temperatures greater than the LCST, the binding interactions are dominated by direct solubilization of PPG chains into mixed micellar cores. At temperatures near the LCST, the binding interactions are controlled by the balance ofthe PPG solubilization at low SDS concentrations and polymer-induced micellization at high SDS concentrations.     

Separation of denatured proteins in free solution on a microchip based on differential binding of alkyl sulfates with different carbon chain lengths

Denatured proteins were separated in free solution on a microfluidic chip without any sieving matrix after carrying out the denaturation with a mixture of alkyl sulfates with different carbon chain lengths.     

Development of a fitting model suitable for the isothermal titration calorimetric curve of DNA with cationic ligands

A novel curve fitting model was developed for the isothermal titration calorimetry (ITC) of a cationic ligand binding to DNA. The ligand binding often generates a DNA conformational change from an elongated random coil into a compact collapsed form that is referred to as "DNA condensation". The ligand binding can be classified into two regimes having different binding constants Ki, i.e., the binding to an elongated DNA chain with a binding constant K1 and with K2 that occurred during the conformational transition. The two-variable curve fitting models are usually bound by a strict regulation on the difference in the values of the binding constants K1 > K2. For the DNA condensation, however, the relationships for K1 and K2 are still unclear. The novel curve fitting model developed in this study takes into account this uncertainty on the relationship of the binding constants and is highly flexible for the two-variable binding constant system.     

Effect of surfactant chain length on the binding interaction of a biological photosensitizer with cationic micelles

Steady-state and time-resolved fluorometric techniques have been exploited to study the photophysical and distribution behavior of an efficient cancer cell photosensitizer, norharmane (NHM), in well-characterized, biomimicking nanocavities formed by cationic micelles with varying surfactant chain length. Amphiphiles like dodecyl trimethyl ammonium bromide (DTAB), tetradecyl trimethyl ammonium bromide (TTAB), and cetyl trimethyl ammonium bromide (CTAB) have been used for the purpose. Emission behavior of NHM is very much dependent on the surfactant concentration as well as their hydrophobic chain length. The binding constant (K) and free-energy change (DeltaG) for the interaction of NHM with the cationic micelles have been determined from the fluorescence data. Polarity of the microenvironment around the probe has been determined in the cationic micellar environments from a comparison of the variation of fluorescence properties of the two-prototropic species of the probe in water/dioxane mixture with varying composition. Experimental results demonstrate that the variation in the cationic surfactant chain length plays an important role in promoting a specific prototropic form of the probe molecule. Fluorescence decays are biexponential in all the micelles indicating that the probe molecules are distributed between the two distinct regions of the micelles. The population of the component with a longer lifetime corresponds to the probe in the head group site, while the short-lived component comes from the probe bound to the core region of the micelles. On the basis of the lifetime measurements, the partitioning behavior of the chromophore in the head group and in the core regions in the micelles has been determined.     

Fibrous assemblies and water gelation in mixtures of lysine with sodium alkyl sulfates

Thermoresponsive, pH-sensitive fibrous structures and gels are formed in aqueous mixtures of the amino acid lysine with oppositely charged sodium alkyl sulfate surfactants. The formation of these assemblies depends on the chain length of the surfactant, which is varied between 8 and 16, the chirality and degree of protonation of the amino acid, and the molar ratio of these species. Self-assembly of the fibers occurs when specific lysine enantiomers are in solution and for pH conditions in which the majority of the amine groups are protonated (i.e., at near-equimolar amounts of HCl and lysine). Racemic mixtures of lysine do not form fibers with sodium dodecyl sulfate. Micelles are the fiber precursors, and the fibers, which can be hundreds of micrometers long, entangle to form gels. With increasing temperature, the gels melt, the fibers dissolve, and a single micellar phase forms. The micelles elongate with decreasing pH when the acid concentration is greater than equimolar with respect to lysine, and they shrink with increasing temperature.     

Effects of alkyl chain length on surface and micellar properties of octaethyleneglycol-n alkyl ethers

Summary Surface and micellar properties of a homologous series of Octaethylene glycol-n-alkyl ethers (C _n E₈;n = 9 to 15) have been studied in aqueous solutions by the surface tension measurements. The effects of the alkyl chain length comprising even and carbon numbers have been examined in order to evaluate the surface free energy G _A-W and the standard free energy G _m for the micellization obtained from their surface tension data. The areas per molecule and the equilibrium surface tension values at the CMC decreased with an increasing carbon number and they showed zigzag curves by the difference in even and odd carbon numbers.These findings may be attributed to the differences in the molecular orientation between the molecules with even carbon number and ones with odd carbon number on the air-water interface at CMC. G _A-W values decreased linearly with an increasing alkyl chain length but did not show a zigzag line by the differences in even and odd carbon numbers. This suggests that the molecular orientation is not influenced by the difference between their even and odd carbon numbers in the alkyl chain on the surface of the very diluted solution, and their molecules form some stable adsorbed films with an increase of the alkyl chain length. A division of G _A-W into the contribution made both by the hydrophilic group G _A-W (-W) and by the hydrophobic group G _A-W (-CH₂-) was attempted as follows; G _A-W (-CH₂-) = – 0.80 kcal/mol and G _a-W (-W) = + 0.15 kcal/mol.The free energy changes G _m of micellization were discussed on the basis of the CMC data obtained from the surface tension measurements by treating the formation of micelles as analogous to phase separation, and the contribution from the each moieties in the molecule were calculated as follows; G _m (-CH₂-) = – 0.68 kcal/mol and G _m (-W) = + 1.54 kcal/mol. The difference between G _A-W and G _m is discussed using their data.     

Interfacial regions governing internal cavities of dendrimers. Studies of poly(alkyl aryl ether) dendrimers constituted with linkers of varying alkyl chain length

This report deals with a study of the properties of internal cavities of dendritic macromolecules that are capable of encapsulating and mediating photoreactions of guest molecules. The internal cavity structures of dendrimers are determined by the interfacial regions between the aqueous exterior and hydrocarbon like interior constituted by the linkers that connect symmetrically sited branch points constituting the dendrimer and head groups that cap the dendrimers. Phloroglucinol-based poly(alkyl aryl ether) dendrimers constituted with a homologous series of alkyl linkers were undertaken for the current study. Twelve dendrimers within first, second, and third generations, having ethyl, n-propyl, n-butyl, and n-pentyl groups as the linkers and hydroxyl groups at peripheries in each generation, were synthesized. Encapsulation of pyrene and coumarins by aqueous basic solutions of dendrimers were monitored by UV-vis and fluorescence spectroscopies, which showed that a lower generation dendrimer with an optimal alkyl linker presented better encapsulation abilities than a higher generation dendrimer. Norrish type I photoreaction of dibenzyl ketone was carried out within the above series of dendrimers to probe their abilities to hold guests and reactive intermediate radical pairs within themselves. The extent of cage effect from the series of third generation dendrimers was observed to be higher with dendrimers having an n-pentyl group as the linker.     

The interaction between sodium alkyl sulfate surfactants and the oppositely charged polyelectrolyte, polyDMDAAC, at the air-water interface: the role of alkyl chain length and electrolyte and comparison with theoretical predictions

The effect of alkyl chain length and electrolyte on the adsorption of sodium alkyl sulfate surfactants and the oppositely charged polyelectrolyte, polyDMDAAC, at the air-water interface has been investigated by surface tension and neutron reflectivity. The variations in the patterns of adsorption and surface tension behavior with alkyl chain length and electrolyte are discussed in the context of the competition between the formation of surface active surfactant/polyelectrolyte complexes and polyelectrolyte/surfactant micelle complexes in solution. A theoretical approach based on the law of mass action has been used to predict the surface effects arising from the competition between the formation of polyelectrolyte/surfactant surface and solution complexes and the formation of free surfactant micelles. This relatively straightforward model is shown to reproduce the principal features of the experimental results.     

Structural analysis of protein complexes with sodium alkyl sulfates by small-angle scattering and polyacrylamide gel electrophoresis

Small-angle X-ray (SAXS) and neutron (SANS) scattering is used to probe the structure of protein-surfactant complexes in solution and to correlate this information with their performance in gel electrophoresis. Proteins with sizes between 6.5 to 116 kDa are denatured with sodium alkyl sulfates (SC(x)S) of variable tail lengths. Several combinations of proteins and surfactants are analyzed to measure micelle radii, the distance between micelles, the extension of the complex, the radius of gyration, and the electrophoretic mobility. The structural characterization shows that most protein-surfactant complexes can be accurately described as pearl-necklace structures with spherical micelles. However, protein complexes with short surfactants (SC(8)S) bind with micelles that deviate significantly from spherical shape. Sodium decyl (SC(10)S) and dodecyl (SC(12)S, more commonly abbreviated as SDS) sulfates result in the best protein separations in standard gel electrophoresis. Particularly, SC(10)S shows higher resolutions for complexes of low molecular weight. The systematic characterization of alkyl sulfate surfactants demonstrates that changes in the chain architecture can significantly affect electrophoretic migration so that protein-surfactant structures could be optimized for high resolution protein separations.     

Spectrophotometric and calorimetric titration studies on molecular recognition of camphor and borneol by nucleobase-modified beta-cyclodextrins

A series of modified beta-cyclodextrins with nucleobase substituents, that is, mono(6-ade-6-deoxy)-beta-cyclodextrin (2) and mono(6-ura-6-deoxy)-beta-cyclodextrin (3) as well as mono(6-thy-6-deoxy)-beta-cyclodextrin (4), were selected as molecular receptors to investigate their conformation and inclusion complexation behaviors with some chiral molecules, that is, (+)-camphor, (-)-camphor, (+)-borneol, and (-)-borneol, by spectrophotometric and microcalorimetric titrations in aqueous phosphate buffer solution (pH 7.2) at 298.15 K. Circular dichroism and NMR studies demonstrated that these nucleobase-modified beta-cyclodextrins adopted a co-inclusion mode upon complexation with guest molecules; that is, the originally self-included nucleobase substituents of the host did not move out from the beta-cyclodextrin cavity, but coexisted with guest molecule in the beta-cyclodextrin cavity upon inclusion complexation. Significantly, these nucleobase-modified beta-cyclodextrins efficiently enhanced the molecular binding ability and the chiral recognition ability of native beta-cyclodextrin, displaying enantioselectivity up to 3.7 for (+)-camphor/(-)-camphor pair by 2 and 3.5 for (-)-borneol/(+)-borneol pair by 3. The enhanced molecular/chiral recognition abilities of 2-4 toward (+/-)-camphor were mainly attributed to the increased entropic gains due to the extensive desolvation effects, while the favorable enthalpic gains originating from the good size-fit relationship as well as the hydrogen bond interactions between host and guest result in the enhanced molecular/chiral recognition abilities of 2-4 toward (+/-)-borneol.     

Aggregation of tetrameric acid in xylene and its interaction with asphaltenes by isothermal titration calorimetry

Journal of Thermal Analysis and Calorimetry - This paper describes the self-association of tetrameric acids (TA) and their interactions with asphaltenes using isothermal titration calorimetry. In...     

Aggregation and protein binding of sodium maleate copolymers with varying hydrophobicities

Copolymers of sodium maleate with methyl methacrylate, styrene, or vinyl acetate have been synthesized and studied in aqueous NaCl solutions of various ionic strengths. The polymers are polyelectrolytes with varying hydrophobicities, and their solution properties have been studied using static and dynamic light scattering. Copolymers containing methyl methacrylate or styrene were shown to aggregate in water upon increasing salt concentration. Copolymers of sodium maleate and vinyl acetate do not associate with increasing ionic strength. The binding of bovine serum albumin and cytochrome C to the sodium maleate copolymers was also investigated by light scattering. It was observed that cytochrome C forms complexes with the copolymers containing methyl methacrylate or vinyl acetate whereas albumin does not bind to any of the copolymers studied. Copyright © 2004 John Wiley & Sons, Ltd.     

Polymerization of surface-active monomers. II. Polymerization of quarternary alkyl salts of dimethylaminoethyl methacrylate with a different alkyl chain length

The cationic monomers (C_NBr), obtained by quarternization of dimethylaminoethyl methacrylate with n-alkyl bromide containing varying carbon number (N = 4, 8, 12, 14, and 16) were polymerized with radical initiators in water and various organic solvents. The degree of polymerization of the resulting polymers was determined by GPC measurements on poly(methyl methacrylate) samples derived from them. The rate of polymerization of the micelle-forming monomers (N = 8, 12, 14, and 16) in water increases with increasing a chain length of alkyl group, whereas it is little dependent on N in isotropic solution in dimethylformamide. The data on the degree of polymerization for the polymers of C₄Br, C₈Br, and C₁₂Br show that the polymerization of C₁₂Br with azo initiators in water and benzene gives polymers with a very high degree of polymerization. The results obtained here suggest that highly developed or relatively rigid, aggregated structures of monomers in solution are responsible for the formation of the polymers with a very high degree of polymerization, in addition to an enhanced rate of polymerization. Also considered are the relation of the molecular weight of poly(C₁₂Br) to the viscosity data in chloroform and methanol.     

Effect of the length of surfactant hydrocarbon radicals on the association of cationic polyelectrolytes with alkyl sulfates in water-alcohol solutions

The effect of the lengths of the alkyl radicals of sodium alkyl sulfates (decyl sulfate, dodecyl sulfate, and tetradecyl sulfate) on the association with partially quaternized poly(4-vinylpyridine) in wateralcohol solutions of different compositions is studied via potentiometry, viscometry, spectrophotometry, and dynamic light scattering. The critical concentrations of surfactant association, hydrodynamic radii, and molecular-mass characteristics of polyelectrolyte-surfactant associates are determined. The parameters of the surfactant-polymer cooperative association and the dissociation constants of the complexes are calculated. An increase in the lengths of the alkyl radicals results in enhanced associative interactions in the polyelectrolyte-surfactant system at ethanol concentrations below 34 vol %. In solutions with higher alcohol concentrations, the composition of the solvent plays the decisive role in polymer-colloid complexation.     

Water-AOT-alkylbenzene microemulsions: influence of alkyl chain length on structure and percolation behavior

We study the percolation behavior of the water-in-oil (w/o) droplet phase of AOT (sodium bis[2-ethylhexyl] sulfosuccinate)-based microemulsions with different alkylbenzenes (toluene, ethylbenzene, butylbenzene or octylbenzene) as oil phase. We use microemulsions of varying composition with molar water to surfactant ratios 0≤W≤ 50 and droplet (water plus surfactant) volume fractions 10%≤φ≤50%. Using dielectric spectroscopy, a percolation transition is observed in w/o microemulsions with butylbenzene or octylbenzene. With increasing molecular weight of the alkylbenzene, the percolation temperature T(P) decreases. The structure of the microemulsions is determined by small angle X-ray scattering (SAXS). With increasing molar weight of the alkylbenzene, the stability range of the L(2) droplet phase extends to higher W. The larger amount of solubilizable water can be related to variable oil penetration of the AOT monolayer, which affects the spontaneous curvature of the surfactant shell.     

Effects of chain length and N-methylation on a cation-pi interaction in a beta-hairpin peptide

The effects of N-methylation and chain length on a cation-pi interaction have been investigated within the context of a beta-hairpin peptide. Significant enhancement of the interaction and structural stabilization of the hairpin have been observed upon Lys methylation. Thermodynamic analysis indicates an increased entropic driving force for folding upon methylation of Lys residues. Comparison of lysine to analogues ornithine (Orn) and diaminobutyric acid (Dab) indicates that lysine provides the strongest cation-pi interaction and also provides the most stable beta-hairpin due to a combination of side chain-side chain interactions and beta-sheet propensities. These studies have significance for the recognition of methylated lysine in histone proteins.