Development of self‐healing polymers with spontaneous self‐healing capability and good mechanical performance is highly desired and remains a great challenge. Here, mechanical robust and self‐healable supramolecular hydrogels have been fabricated by using poly(2‐dimethylaminoethyl methacrylate) brushes modified silica nanoparticles (SiO2@PDMAEMA) as multifunctional macrocrosslinkers in a poly(acrylic acid) (PAA) network structure. The SiO2 nanoparticles serve as noncovalent crosslinkers, dissipating energy, whereas the electrostatic interactions between cationic PDMAEMA and anionic PAA render the hydrogel self‐healing property. This process provides a simple and broadly applicable strategy to produce mechanical strong and self‐healable materials.
Binary polystyrene and poly(4‐vinylpyridine) mixed grafted silica nanoparticles (PSt/P4VP‐g‐SNPs) are fabricated using CuI‐catalyzed azide‐alkyne Huisgen cycloaddition (CuAAC) via grafting‐to method. Azide‐terminated PSt and P4VP are synthesized via post‐ and pre‐atom transfer radical polymerization modification, respectively. Then, the polymers are simultaneously anchored onto alkyne‐modified SNPs by CuAAC yielding mixed brushes as shown by Raman spectroscopy, dynamic light scattering, and thermogravimetric analysis. To the best of our knowledge, this is the first report of simultaneously grafting two distinct polymer chains to synthesize mixed grafted silica nanoparticles using CuAAC technique via grafting‐to method.
A facile and versatile method for the synthesis of Janus graphene oxide (GO) nanosheets with different structures is reported. Based on electrostatic assembly, Janus GO nanosheets can be easily functionalized with a template polymer or be defunctionalized by altering the ionic strength. By using this approach, Janus GO nanosheets are prepared successfully with hydrophobic polystyrene chains on one side and hydrophilic poly(2‐(dimethylamino)ethyl methacrylate) chains on the other side.
Thermoresponsive polymer brushes are grafted on micro/nanostructured polymer substrates as new intelligent interfaces that synergistically enhance wettability changes in response to external temperature stimuli. Thermoplastic poly(styrene‐co‐4‐vinylbenzyl chloride) [P(St‐co‐VBC)] is synthesized using radical polymerization and spin‐coated on a glass substrate. Micro/nanopillar and hole patterns are imprinted on the P(St‐co‐VBC) layer using thermal nanoimprint lithography. Poly(N‐isopropylacrylamide) (PIPAAm) brushes are grafted on the micro/nanostructured P(St‐co‐VBC) layer through surface‐initiated atom‐transfer radical polymerization using 4‐vinylbenzyl chloride as the initiator. The imprinted micro/nanostructures and grafted PIPAAm brush chain lengths affect the surface wettability. Combinations of nanopillars or nanoholes (diameter 500 nm) and longer PIPAAm brushes enhance hydrophobic/hydrophilic changes in response to temperature changes, compared with the flat substrate. The thermoresponsive hydrophobic/hydrophilic transition is synergistically enhanced by the nanostructured surface changing from Cassie–Baxter to Wenzel states. This PIPAAm‐brush‐modified micro/nanostructured P(St‐co‐VBC) is a new intelligent interface that effectively changes wettability in response to external temperature changes.
Molecular bottle‐brush functionalized single‐walled carbon nanotubes (SWCNTs) with superior dispersibility in water are prepared by a one‐pot synthetic methodology. Elongating the main‐chain and side‐chain length of molecular bottle‐brushes can further increase SWCNT dispersibility. They show significant enhancement of SWCNT dispersibility up to four times higher than those of linear molecular functionalized SWCNTs.
Surface‐initiated photo‐induced copper‐mediated radical polymerization is employed to graft a wide range of polyacrylate brushes from silicon substrates at extremely low catalyst concentrations. This is the first time that the controlled nature of the reported process is demonstrated via block copolymer formation and re‐initiation experiments. In addition to unmatched copper catalyst concentrations in the range of few ppb, film thicknesses up to almost 1 μm are achieved within only 1 h.
A new multivalent glycopolymer platform for lectin recognition is introduced in this work by combining the controlled growth of glycopolymer brushes with highly specific glycosylation reactions. Glycopolymer brushes, synthetic polymers with pendant saccharides, are prepared by surface‐initiated atom transfer radical polymerization (SI‐ATRP) of 2‐O‐(N‐acetyl‐β‐d ‐glucosamine)ethyl methacrylate (GlcNAcEMA). Here, the fabrication of multivalent glycopolymers consisting of poly(GlcNAcEMA) is reported with additional biocatalytic elongation of the glycans directly on the silicon substrate by specific glycosylation using recombinant glycosyltransferases. The bioactivity of the surface‐grafted glycans is investigated by fluorescence‐linked lectin assay. Due to the multivalency of glycan ligands, the glycopolymer brushes show very selective, specific, and strong interactions with lectins. The multiarrays of the glycopolymer brushes have a large potential as a screening device to define optimal‐binding environments of specific lectins or as new simplified diagnostic tools for the detection of cancer‐related lectins in blood serum.
Stratified polymer brushes are fabricated using microcontact printing (μCP) of initiator integrated polydopamine (PDOPBr) on polymer brush surfaces and the following surface initiated atom transfer radical polymerization (SI‐ATRP). It is found that the surface energy, chemically active groups, and the antifouling ability of the polymer brushes affect transfer efficiency and adhesive stability of the polydopamine film. The stickiness of the PDOPBr pattern on polymer brush surfaces is stable enough to perform continuous μCP and SI‐ATRP to prepare stratified polymer brushes with a 3D topography, which have broad applications in cell and protein patterning, biosensors, and hybrid surfaces.
Simulated‐sunlight induced atom transfer radical polymerization is used for spatial control over polymer brush growth by in situ photo‐generation of the CuI/L activator complex from its higher oxidation state CuII/L deactivator complex using dye sensitized titanium dioxide nanoparticles. The polymerization is well controlled under sunlight irradiation. Another attractive feature of this method is the possibility of creating various patterned surfaces of brushes using photomasks. When a nanoporous alumina oxide membrane is used as the template for confinement diffusion of photogenerated CuI/L catalyst, patterns with sub‐50 nm resolution are obtained.
Imitating the natural “energy cascade” architecture, we present a single‐molecular rod‐like nano‐light harvester (NLH) based on a cylindrical polymer brush. Block copolymer side chains carrying (9,9‐diethylfluoren‐2‐yl)methyl methacrylate units as light absorbing antennae (energy donors) are tethered to a linear polymer backbone containing 9‐anthracenemethyl methacrylate units as emitting groups (energy acceptors). These NLHs exhibit very efficient energy absorption and transfer. Moreover, we manipulate the energy transfer by tuning the donor–acceptor distance.
A new synthetic procedure is described for the preparation of poly(organo)phosphazenes with star‐branched and star dendritic molecular brush type structures, thus describing the first time it has been possible to prepare controlled, highly branched architectures for this type of polymer. Furthermore, as a result of the extremely high‐arm density generated by the phosphazene repeat unit, the second‐generation structures represent quite unique architectures for any type of polymer. Using two relativity straight forward iterative syntheses it is possible to prepare globular highly branched polymers with up to 30 000 functional end groups, while keeping relatively narrow polydispersities (1.2–1.6). Phosphine mediated polymerization of chlorophosphoranimine is first used to prepare three‐arm star polymers. Subsequent substitution with diphenylphosphine moieties gives poly(organo)phosphazenes to function as multifunctional macroinitiators for the growth of a second generation of polyphosphazene arms. Macrosubstitution with Jeffamine oligomers gives a series of large, water soluble branched macromolecules with high‐arm density and hydrodynamic diameters between 10 and 70 nm.
A facile and versatile approach to constructing colorless surface coatings based on green tea polyphenols is reported, which can further act as a photoinitiating layer to initiate radical polymerization. These colorless green tea polyphenol coatings are capable of successfully photografting polymer brushes, and the resulting polymer brush patterns show spatial shape adjustability by masked UV irradiation. Both surface modifications and photografted polymer brushes do not alter the original color of the substrates. This method could be promising for the development of surface modifications.
Photolithographic patterning of a xanthate precursor to poly(3,4‐diphenyl‐2,5‐thienylene vinylene) is described. Unlike xanthate precursors to poly(p‐phenylene vinylene), the thienylene vinylene analogue patterns as a positive tone resist. Characterization of irradiated films reveals photooxidative cleavage of the vinylene linker decreases the molecular weight of the polymer (increasing the solubility of the UV‐exposed areas). As a result of the mechanism, the developed pattern sees no UV light exposure, which is a significant advantage compared with negative‐tone‐conjugated polymer resists. Single micron resolution of a low‐bandgap polymer is achieved in an efficient and scalable process.
Thin, phenylboronic acid‐containing polymer coatings are potentially attractive sensory layers for a range of glucose monitoring systems. This contribution presents the synthesis and properties of glucose‐sensitive polymer brushes obtained via surface RAFT polymerization of 3‐methacrylamido phenylboronic acid (MAPBA). This synthetic strategy is attractive since it allows the controlled growth of PMAPBA brushes with film thicknesses of up to 20 nm via direct polymerization of MAPBA without the need for additional post‐polymerization modification or deprotection steps. QCM‐D sensor chips modified with a PMAPBA layer respond with a linear change in the shift of the fundamental resonance frequency over a range of physiologically relevant glucose concentrations and are insensitive toward the presence of fructose, thus validating the potential of these polymer brush films as glucose sensory thin coatings.
A free‐standing polymer brush film with tailored thicknesses based on a colorless polydopamine (PDA) thin layer is prepared and characterized. The surface‐initiated atom transfer radical polymerization (ATRP) of 2‐hydroxyethyl methacrylate (HEMA) is performed on a PDA layer with thickness of ca. 6 nm, which generated an optically transparent and colorless free‐standing PHEMA brush film (1.5 cm × 1.5 cm). Because the cross‐linked PDA layer is used as the base for the polymer brushes, the reported method does not require cross‐linking the polymer brushes. The free‐standing film thicknesses of ≈16–75 nm are controlled by simply changing the ATRP reaction time. The results show that the free‐standing PHEMA brush film transferred onto a plate exhibits a relatively smooth surface and is stable in any solvent.
Polymer brushes have a large potential for controlling properties such as surface lubrication or wetting through facile functionalization. Polymer chemistry, chain density, and length impact on the wetting properties of brushes. This study explores the use of diblock copolymer brushes with different block length and spatial arrangement of the blocks to tune surface wettability. Block copolymer brushes of the polyelectrolyte [2‐(methacryloyloxy)ethyl] trimethylammonium chloride (PMETAC) with a contact angle of 17° and a hydrophobic block of 1H, 1H, 2H, 2H‐perfluorodecyl Acrylate (PPFDA) with a contact angle of 130° are synthesized by RAFT polymerization. By changing the sequence of polymerization either block is synthesized as top or bottom block. By varying the concentration of initiator the length of the blocks is varied. Contact angle values with intermediate values between 17° and 130° are measured. In addition, by changing solvent pH and in presence of a different salt the contact angle of the copolymer brushes can be fine tuned. Brushes are characterized by atomic force microscopy, Raman confocal microscopy, and X‐ray photoelectron spectroscopy.
Polydopamine‐based coatings are fabricated via an electric field‐accelerating and ‐directing codeposition process of polydopamine with charged polymers such as polycations, polyanions, and polyzwitterions. The coatings are uniform and smooth on various substrates, especially on those adhesion‐resistant materials including poly(vinylidene fluoride) and poly(tetrafluoroethylene) membranes. Moreover, this electric field‐directed deposition method can be applied to facilely prepare Janus membranes with asymmetric chemistry and wettability.
Electrospinning is a well‐known technique for the preparation of scaffolds for biomedical applications. In this work, a continuous electrospinning method for gel fiber preparation is presented without a spinning window. As proof of concept, the preparation of poly(aspartic acid)‐based hydrogel fibers and their properties are described by using poly(succinimide) as shell polymer and 2,2,4(2,4,4)‐trimethyl‐1,6‐hexanediamine as cross‐linker in the core of the nozzle. Cross‐linking takes place as the two solutions get in contact at the tip of the nozzle. The impact of solution concentrations and feeding rates on fiber morphology, proof of the presence of cross‐links as well as pH sensitivity after the transformation of the poly(succinimide)‐based material to poly(aspartic acid) is presented.
A novel strategy for the incorporation of carbon dioxide into polymers is introduced. For this purpose, the Ugi five‐component condensation (Ugi‐5CC) of an alcohol, CO2, an amine, an aldehyde, and an isocyanide is used to obtain step‐growth monomers. Polymerization via thiol‐ene reaction or polycondensation with diphenyl carbonate gives diversely substituted polyurethanes or alternating polyurethane‐polycarbonates, respectively. Furthermore, the application of 1,12‐diaminododecane and 1,6‐diisocyanohexane as bifunctional components in the Ugi‐5CC directly results in the corresponding polyamide bearing methyl carbamate side chains ( = 19 850 g mol−1). The latter polymer is further converted into the corresponding polyhydantoin in a highly straightforward fashion.
Photoresponsive azobenzene‐containing systems ranging from molecular to macroscopic material levels have greatly been increasing their significance in materials chemistry. This review focuses on the studies on light induced or triggered motions in azobenzene liquid crystalline (LC) polymer films at mesoscopic and microscopic levels. Due to the cooperative nature of liquid crystalline materials, highly efficient photoalignment and photo‐triggered migrating motions are realized in mostly repeated manners. Here, recent advances in surface‐grafted LC polymer brushes, LC block copolymer films, and LC polymer films that exhibit mass migrations are overviewed. Such newly emerged photoresponsive systems are expected to provide new possibilities and applications in polymer thin film technologies.
