Bi2Fe4O9/g-C3N4/UiO-66三元复合材料的协同光催化作用

通过水热法合成具有协同机制的三元复合材料Bi₂Fe₄O₉/g-C₃N₄/UiO-66,研究表明三元复合光催化剂的催化活性要高于二元材料和纯材料。这主要是由于Bi₂Fe₄O₉更易于和g-C₃N₄结合形成稳定的Z-scheme异质结结构,使三元复合材料增强了可见光响应能力,提高了电子-空穴分离能力,增强了空穴和电子的氧化还原能力。     

Bi2Fe4O9/g-C3N4/UiO-66三元复合材料的协同光催化作用

通过水热法合成具有协同机制的三元复合材料Bi₂Fe₄O₉/g-C₃N₄/UiO-66,研究表明三元复合光催化剂的催化活性要高于二元材料和纯材料。这主要是由于Bi₂Fe₄O₉更易于和g-C₃N₄结合形成稳定的Z-scheme异质结结构,使三元复合材料增强了可见光响应能力,提高了电子-空穴分离能力,增强了空穴和电子的氧化还原能力。     

Synergetic effect of ZnIn2S4 nanosheets with metal-organic framework molding heterostructure for efficient visible- light driven photocatalytic reduction of Cr(VI)

The photocatalytic reduction of toxic Cr(VI), to green Cr(III) by visible light, is highly required. Metal-organic frameworks have been waged more and more devotion in the field of environmental remediation. Diversification along with functionalization is still thought-provoking and crucial for the progress of metal-organic framework (MOF)-based high activity materials. Herein, a succession of UiO-66-NH₂@ZnIn₂S₄ composites with varying amount of UiO-66-NH₂ is prepared by the facile solvothermal technique. Synergetic effect for Cr(VI) reduction is assessed under the influence of visible light (λ > 420 nm). UiO-66-NH₂ octahedron is detained by ZnIn₂S₄ nanoflakes. The obvious enhancement in activity is observed which is credited to the well-suited energy band construction and close interaction between the interface of ZnIn₂S₄ and UiO-66-NH₂, which leads to effective transfer and separation of photogenerated carriers. Synergistic effect could be evidently understood from the PL and UV -spectroscopy, after molding into heterostructure of UiO-66-NH₂@ZnIn₂S₄. In addition, UiO-66-NH₂@ZnIn₂S₄ composites exhibited good stability in photocatalytic reduction. Consequently, this UiO-66-NH₂ constructed composite has high potential in the field of environmental remediation.     

Exploiting parameter space in MOFs: a 20-fold enhancement of phosphate-ester hydrolysis with UiO-66-NH2

The hydrolysis of nerve agents is of primary concern due to the severe toxicity of these agents. Using a MOF-based catalyst (UiO-66), we have previously demonstrated that the hydrolysis can occur with relatively fast half-lives of 50 minutes. However, these rates are still prohibitively slow to be efficiently utilized for some practical applications (e.g., decontamination wipes used to clean exposed clothing/skin/vehicles). We thus turned our attention to derivatives of UiO-66 in order to probe the importance of functional groups on the hydrolysis rate. Three UiO-66 derivatives were explored; UiO-66-NO₂ and UiO-66-(OH)₂ showed little to no change in hydrolysis rate. However, UiO-66-NH₂ showed a 20 fold increase in hydrolysis rate over the parent UiO-66 MOF. Half-lives of 1 minute were observed with this MOF. In order to probe the role of the amino moiety, we turned our attention to UiO-67, UiO-67-NMe₂ and UiO-67-NH₂. In these MOFs, the amino moiety is in close proximity to the zirconium node. We observed that UiO-67-NH₂ is a faster catalyst than UiO-67 and UiO-67-NMe₂. We conclude that the role of the amino moiety is to act as a proton-transfer agent during the catalytic cycle and not to hydrogen bond or to form a phosphorane intermediate.     

Zr-Based MOFs with High Drug Loading for Adsorption Removal of Anti-Cancer Drugs: A Potential Drug Storage

A robust and highly water stable series of UiO-66-drived MOFs including UiO-66-NH₂, glycidyl methacrylate functionalized UiO-66-NH₂ (UiO-66-GMA) and ethylenediamine functionalized UiO-66-NH₂ (UiO-66-EDA) were synthesized solvothermally and studied their adsorption performances toward two anti-cancer drugs, methotrexate (MTX) and curcumin (CUR) in the case of overdose. It was found that functionalizing the surface of UiO-66-NH₂ nanoparticles with different functional groups remarkably changes the adsorption capacity and the ideal adsorption selectivity of MTX over CUR. Particularly, the UiO-66-EDA exhibited the highest adsorption capacities for both drugs, 540.78 and 423.85 mg/g for MTX and CUR, respectively, because of the strong interaction between drug molecules and adsorbent via hydrogen bonding due to the existence of different polar functional groups. The kinetics of drugs adsorption was investigated by three well-known kinetic models, which the output indicates that the adsorption of both drugs onto the synthesized MOFs follow the pseudo-second-order model. Moreover, it was found that the equilibrium adsorption results were well fitted with the Langmuir isotherm models, revealing that the adsorption of both drugs onto the synthesized MOFs is a monolayer adsorption process. Further investigation illustrated that the synthesized MOFs could be easily activated and reused after four successive adsorption–desorption cycles. The output of the present work is of main important for biomedical and environmental applications of MOFs as an outstanding adsorbent for adsorption removal of hazardous drugs from contaminated aqueous solutions.     

Preparation and photocatalytic performance research of Bi2WO6/UiO-66-NH2 composite

Bi₂WO₆/UiO-66-NH₂ photocatalysts were fabricated through solvothermal method using acetic acid as template. The photocatalytic performance of as-fabricated composites was highly improved under simulated visible light due to the addition of UiO-66-NH₂. The structural and chemical properties of the composites were characterized through FTIR, XRD, XPS, SEM, BET, UV–vis DRS and PL. After 90 min of visible light irradiation, the RhB at an initial concentration of 10 mg·L^?1 in the solution was degraded by 99.4% due to the addition of 10 mg of the composite. There was no significant decrease in the photocatalytic activity even after four rounds of cycles. The free radical capture experiments indicate that the photogenerated holes (h⁺) were the main active sites. The possible photocatalytic degradation mechanism was proposed as the specific surface area of the composite was enlarged due to the uniform distribution of UiO-66-NH₂ on the surface of Bi₂WO₆. The electron–hole pairs recombination rate was decreased due to the photogenerated electrons (e^?) on the CB of Bi₂WO₆ which can be rapidly transferred to the CB of UiO-66-NH₂ and the photogenerated holes of UiO-66-NH₂ transferred to the VB of Bi₂WO₆. Meanwhile, the RhB was directly oxidized to H₂O and CO₂ by h⁺ to achieve the purification effect.

     

Preparation of piperazine-grafted amine-functionalized UiO-66 metal organic framework and its application for CO<Subscript>2</Subscript> over CH<Subscript>4</Subscript> separation

UiO-66 amine functionalized was synthesized by solvothermal method. Post-synthetic modification of UiO-66-NH₂ with piperazine, a known promoter to enhance the chemisorption rate of CO₂ uptake, was carried out and analyzed to understand its crystalline structure, morphology and porous structure. Results show that piperazine is an effective agent for enhancing the capacity of absorption of CO₂. This porous product exhibits an improved CO₂ uptake at pressures up to 3000 kPa via physisorption and chemisorption mechanisms. The CH₄ adsorption and desorption isotherms on UiO-66, UiO-66-NH₂ and pip-UiO-66-NH₂ at temperature of 298.15 K and pressures ranging from 0 to 5000 kPa were carried out. IAS theory for a mixture of 0.05 bar CO₂, 0.85 bar CH₄ and 0.1 bar other gas revealed a selectivity factor of 19.09 for CO₂/CH₄ from pip-UiO-66-NH₂. Results show that these materials are effective adsorbents for CO₂ and CH₄ uptakes.     

Spray-Coating of Catalytically Active MOF–Polythiourea through Postsynthetic Polymerization

A UiO-66-NCS MOF was formed by postsynthetic modification of UiO-66-NH₂. The UiO-66-NCS MOFs displays a circa 20-fold increase in activity against the chemical warfare agent simulant dimethyl-4-nitrophenyl phosphate (DMNP) compared to UiO-66-NH₂, making it the most active MOF materials using a validated high-throughput screening. The −NCS functional groups provide reactive handles for postsynthetic polymerization of the MOFs into functional materials. These MOFs can be tethered to amine-terminated polypropylene polymers (Jeffamines) through a facile room-temperature synthesis with no byproducts. The MOFs are then crosslinked into a MOF–polythiourea (MOF–PTU) composite material, maintaining the catalytic properties of the MOF and the flexibility of the polymer. This MOF–PTU hybrid material was spray-coated onto Nyco textile fibers, displaying excellent adhesion to the fiber surface. The spray-coated fibers were screened for the degradation of DMNP and showed durable catalytic reactivity.     

全氟酰基合成后修饰UiO-66用于吸附有机污染物

以三氟乙酰基和五氟丙酰基为修饰官能团,通过合成后修饰（PSM）的方法对金属-有机骨架（MOFs）改性,得到疏水骨架材料（UiO-66-F1和UiO-66-F2）。2个骨架材料均显示出亲油性,这说明它们是油性溶剂潜在的吸附材料。修饰后MOFs材料的结晶性、稳定性和多孔性较UiO-66-NH₂仅有微小降低。UiO-66-F1和UiO-66-F2的Brunauer-Emmett-Teller（BET）比表面积分别为810和610 m²·g^-1。骨架材料因其合适的孔大小和疏水微环境,更容易吸附水中的有机污染物。此外,改性后材料对多种有机溶剂的吸附量显著提升,在经过10次的循环吸附后吸附量没有明显降低,具有出色的循环稳定性。     

Facile preparation of nano-g-C3N4/UiO-66-NH2 composite as sorbent for high-efficient extraction and preconcentration of food colorants prior to HPLC analysis

In this work,the nano-g-C₃N₄/Ui O-66-NH₂composite was prepared by one-step solvothermal method.The as-prepared composite was characterized by scanning electron microscopy,Brunner-Emmet-Teller measurement,energy dispersive spectrometer,X-ray diffraction,and Fourier transform infrared spectroscopy.By using nano-g-C₃N₄/Ui O-66-NH₂composite as sorbent,a dispersive solid-phase extraction coupled with high-performance liquid chromatogra...     

Kinetics of photocatalytic degradation of gaseous p-xylene on UiO-66-NH2 and LaFeO3 thin films under combined illumination of ultraviolet and visible lights

The thin film photocatalysts were prepared from solvothermal UiO-66-NH₂ and sol-gel perovskite LaFeO₃ by a dip-coating technique. The properties of obtained catalysts were investigated by the methods of Brunauer-Emmett-Teller adsorption, XRD, SEM, FT-IR, TGA, and UV-vis spectroscopies. The results proved that the thin film of the thickness of 4.2 and 4.7 µm was successfully prepared from micro-mesoporous UiO-66-NH₂ and LaFeO₃ nanocrystals. Possessing small crystals (9-35 nm) and the band gap energy of 2.83 and 1.92 eV, respectively, UiO-66-NH₂ and LaFeO₃ are shown to be a highly active visible-light photocatalyst for photodegradation of p-xylene-contained gas. The kinetics of photocatalytic degradation of p-xylene under combined illumination of ultraviolet and visible lights over obtained UiO-66-NH₂ and LaFeO₃ thin films were carried out in a gradientless flow circulating system at room temperature and atmospheric pressure. The results showed that the Langmuir-Hinshelwood kinetic model was successfully applied to correlate the obtained data. The kinetics of the reaction on both catalysts were found to be written by the fractional equation, describing the dependence of the reaction rate on the concentration of p-xylene, oxygen molecules, dissociative adsorbed water vapor, the photon flux, and the inhibition of CO₂ product. It implies that the reaction occurred at high surface coverages, molecular p-xylene, and oxygen participated in the reaction in the form of surface molecular; water—in the forms of ^•OH and H⁺. Although there is a general kinetic equation for reaction on various catalysts, the different affinities of the catalysts with the compounds present in the reaction create the kinetic feature of the reaction on each catalyst. Because of the high affinity of catalysts with water vapor, the given reactant increased the rate of p-xylene photocatalytic degradation at low concentration but inhibited it in the high concentration region. The adsorption affinity of LaFeO₃ to oxygen is higher compared to UiO-66-NH₂; then, there was an optimum concentration of oxygen in the photodegradation of p-xylene on the former, whereas in the latter monotonically increasing relationship was found.     

Chitosan/UiO-66 composites as high-performance adsorbents for the removal of methyl orange in aqueous solution

UiO-66 and chitosan/UiO-66 composites were successfully synthesized by varying the mass addition of chitosan which were 0%, 2.5%, 5%, 10%, and 20% of the mass of UiO-66, denoted as UiO-66, Cs(2.5)/UiO-66, Cs(5)/UiO-66, Cs(10)/UiO-66, and Cs(20)/UiO-66, respectively. UiO-66 was modified with chitosan using the impregnation process. The X-ray diffraction patterns of the synthesized materials showed characteristic peaks at 2θ of 7.25° and 8.39°, which matched to that of the reported UiO-66. In addition, the Fourier transform infrared spectroscopy spectra of the materials showed absorption bands at the same wavenumber as UiO-66 and chitosan previously reported. The surface morphology of UiO-66 observed from scanning electron microscopy images was in the form of agglomerated small cube particles, where the smaller particles were observed for Cs(10)/UiO-66. From the N₂ adsorption isotherms, it was found that the Brunauer-Emmett-Teller surface areas of UiO-66, Cs(5)/UiO-66, and Cs(10)/UiO-66 materials were 825.7 m²/g, 835.4 m²/g, and 882.2 m²/g, respectively. The results of the study on adsorption of methyl orange in aqueous solutions showed that Cs(5)/UiO-66 had the highest adsorption capacity of 370.37 mg/g and followed the pseudo–second-order adsorption kinetic with a Langmuir isotherm model.     

Selective Formation of Polyaniline Confined in the Nanopores of a Metal–Organic Framework for Supercapacitors

In this study, a strategy that can result in the polyaniline (PANI) solely confined within the nanopores of a metal–organic framework (MOF) without forming obvious bulk PANI between MOF crystals is developed. A water-stable zirconium-based MOF, UiO-66-NH₂, is selected as the MOF material. The polymerization of aniline is initiated in the acidic suspension of UiO-66-NH₂ nanocrystals in the presence of excess poly(sodium 4-styrenesulfonate) (PSS). Since the pore size of UiO-66-NH₂ is too small to enable the insertion of the bulky PSS, the quick formation of pore-confined solid PANI and the slower formation of well dispersed PANI:PSS occur within the MOF crystals and in the bulk solution, respectively. By taking advantage of the resulting homogeneous PANI:PSS polymer solution, the bulk PANI:PSS can be removed from the PANI/UiO-66-NH₂ solid by successive washing the sample with fresh acidic solutions through centrifugation. As this is the first time reporting the PANI solely confined in the pores of a MOF, as a demonstration, the obtained PANI/UiO-66-NH₂ composite material is applied as the electrode material for supercapacitors. The PANI/UiO-66-NH₂ thin films exhibit a pseudocapacitive electrochemical characteristic, and their resulting electrochemical activity and charge-storage capacities are remarkably higher than those of the bulk PANI thin films.     

Controlled synthesis of Bi- and tri-nuclear Cu-oxo nanoclusters on metal–organic frameworks and the structure–reactivity correlations

Precisely tuning the nuclearity of supported metal nanoclusters is pivotal for designing more superior catalytic systems, but it remains practically challenging. By utilising the chemical and molecular specificity of UiO-66-NH₂ (a Zr-based metal–organic framework), we report the controlled synthesis of supported bi- and trinuclear Cu-oxo nanoclusters on the Zr₆O₄ nodal centres of UiO-66-NH₂. We revealed the interplay between the surface structures of the active sites, adsorption configurations, catalytic reactivities and associated reaction energetics of structurally related Cu-based ‘single atoms’ and bi- and trinuclear species over our model photocatalytic formic acid reforming reaction. This work will offer practical insight that fills the critical knowledge gap in the design and engineering of new-generation atomic and nanocluster catalysts. The precise control of the structure and surface sensitivities is important as it can effectively lead to more reactive and selective catalytic systems. The supported bi- and trinuclear Cu-oxo nanoclusters exhibit notably different catalytic properties compared with the mononuclear ‘Cu₁’ analogue, which provides critical insight for the engineering of more superior catalytic systems.

The controlled synthesis of novel bi- and trinuclear Cu-oxo nanoclusters supported on UiO-66-NH₂ that show notably different catalytic properties in the photocatalytic formic acid decomposition reaction is reported.     

Post-Synthetic Modification of Zr-based Metal-Organic Frameworks with Imidazole: Variable Optical Behavior and Sensing

UiO-66-NH₂-IM, a fluorescent metal-organic framework (MOF), was synthesized by post-synthetic modification of UiO-66-NH₂ with 2-imidazole carboxaldehyde via a Schiff base reaction. It was examined using various characterization techniques (PXRD, FTIR, NMR, SEM, TGA, UV-Vis DRS, and photoluminescence spectroscopy). The emissive feature of UiO-66-NH₂-IM was utilized to detect volatile organic compounds (VOCs), metal ions, and anions, such as acetone, Fe³⁺, and carbonate (CO₃²⁻). Acetone turns off the high luminescence of UiO-66-NH₂-IM in DMSO, with the limit of detection (LOD) being 3.6 ppm. Similarly, Fe³⁺ in an aqueous medium is detected at LOD=0.67 μM (0.04 ppm) via quenching. On the contrary, CO₃²⁻ in an aqueous medium significantly enhances the luminescence of UiO-66-NH₂-IM, which is detected with extremely high sensitivity (LOD=1.16 μM, i. e., 0.07 ppm). Large Stern-Volmer constant, K_sv, and low LOD values indicate excellent sensitivity of the post-synthetic MOF. Experimental data supported by density functional theory (DFT) calculations discern photo-induced electron transfer (PET), resonance energy transfer (RET), inner filter effect (IFE), or proton abstraction as putative sensing mechanisms. NMR and computational studies propose a proton abstraction mechanism for luminescence enhancement with CO₃²⁻. Moreover, the optical behavior of the post-synthetic material toward analytes is recyclable.     

Heterogeneous Metal–Organic-Framework-Based Biohybrid Catalysts for Cascade Reactions in Organic Solvent

In cooperative catalysis, the combination of chemo- and biocatalysts to perform one-pot reactions is a powerful tool for the improvement of chemical synthesis. Herein, UiO-66-NH₂ was employed to stepwise immobilize Pd nanoparticles (NPs) and Candida antarctica lipase B (CalB) for the fabrication of biohybrid catalysts for cascade reactions. Distinct from traditional materials, UiO-66-NH₂ has a robust but tunable structure that can be utilized with a ligand exchange approach to adjust its hydrophobicity, resulting in excellent catalyst dispersity in diverse reaction media. These attractive properties contribute to the formation of MOF-based biohybrid catalysts with high activity and selectivity in the synthesis of benzyl hexanoate from benzaldehyde and ethyl hexanoate. With this proof-of-concept, we reasonably expect that future tailor-made MOFs can combine other catalysts, ranging from chemical to biological catalysts for applications in industry.     

Bi2WO6/UiO-66复合材料的制备及其光催化性能

通过水热法制备了一种复合光催化剂Bi_2WO_6/UiO-66,探究了模板剂乙酸(CH_3COOH)对Ui O-66形貌的影响和2种中心元素Bi与Zr的不同物质的量之比对光催化性能的影响。通过XRD、SEM、N_2吸附-脱附、UV-Vis DRS、XPS等对催化剂的物相、形貌、比表面积、光吸收性能、元素组成等进行表征。实验结果表明,当n_(Bi)∶n_(Zr)=2∶1时,Bi_2WO_6/UiO-66对罗丹明B(RhB)的光催化活性最高,可见光照射50 min后,RhB的相对浓度降低98.5%。经过5次循环利用实验,催化剂的光催化活性没有明显下降,说明复合光催化剂的稳定性高。根据自由基捕获实验证明了空穴(h~+)为光催化中起决定性作用的活性物质,结合电化学测试以及UV-Vis DRS表征提出了可能的光催化降解机理。     

Phosphonate-Modified UiO-66 Brønsted Acid Catalyst and Its Use in Dehydra-Decyclization of 2-Methyltetrahydrofuran to Pentadienes

Phosphorus-modified all-silica zeolites exhibit activity and selectivity in certain Brønsted acid catalyzed reactions for biomass conversion. In an effort to achieve similar performance with catalysts having well-defined sites, we report the incorporation of Brønsted acidity to metal–organic frameworks with the UiO-66 topology, achieved by attaching phosphonic acid to the 1,4-benzenedicarboxylate ligand and using it to form UiO-66-PO₃H₂ by post-synthesis modification. Characterization reveals that UiO-66-PO₃H₂ retains stability similar to UiO-66, and exhibits weak Brønsted acidity, as demonstrated by titrations, alcohol dehydration, and dehydra-decyclization of 2-methyltetrahydrofuran (2-MTHF). For the later reaction, the reported catalyst exhibits site-time yields and selectivity approaching that of phosphoric acid on all-silica zeolites. Using solid-state NMR and deprotonation energy calculations, the chemical environments of P and the corresponding acidities are determined.     

Incorporating Transition-Metal Phosphides Into Metal-Organic Frameworks for Enhanced Photocatalysis

Metal-organic frameworks (MOFs) have been shown to be an excellent platform in photocatalysis. However, to suppress electron–hole recombination, a Pt cocatalyst is usually inevitable, especially in photocatalytic H₂ production, which greatly limits practical application. Herein, for the first time, monodisperse, small-size, and noble-metal-free transitional-metal phosphides (TMPs; for example, Ni₂P, Ni₁₂P₅), are incorporated into a representative MOF, UiO-66-NH₂, for photocatalytic H₂ production. Compared with the parent MOF and their physical mixture, both TMPs@MOF composites display significantly improved H₂ production rates. Thermodynamic and kinetic studies reveal that TMPs, behaving similar ability to Pt, greatly accelerate the linker-to-cluster charge transfer, promote charge separation, and reduce the activation energy of H₂ production. Significantly, the results indicate that Pt is thermodynamically favorable, yet Ni₂P is kinetically preferred for H₂ production, accounting for the higher activity of Ni₂P@UiO-66-NH₂ than Pt@UiO-66-NH₂.     

Hydrogenative Ring-Rearrangement of Furfural to Cyclopentanone over Pd/UiO-66-NO2 with Tunable Missing-Linker Defects

Upgrading furfural (FAL) to cyclopentanone (CPO) is of great importance for the synthesis of high-value chemicals and biomass utilization. The hydrogenative ring-rearrangement of FAL is catalyzed by metal-acid bifunctional catalysts. The Lewis acidity is a key factor in promoting the rearrangement of furan rings and achieving a high selectivity to CPO. In this work, highly dispersed Pd nanoparticles were successfully encapsulated into the cavities of a Zr based MOF, UiO-66-NO₂, by impregnation using a double-solvent method (DSM) followed by H₂ reduction. The obtained Pd/UiO-66-NO₂ catalyst showed a significantly better catalytic performance in the aforementioned reaction than the Pd/UiO-66 catalyst due to the higher Lewis acidity of the support. Moreover, by using a thermal treatment. The Lewis acidity can be further increased through the creating of missing-linker defects. The resulting defective Pd/UiO-66-NO₂ exhibited the highest CPO selectivity and FAL conversion of 96.6% and 98.9%, respectively. In addition, the catalyst was able to maintain a high activity and stability after four consecutive runs. The current study not only provides an efficient catalytic reaction system for the hydrogenative ring-rearrangement of furfural to cyclopentanone but also emphasizes the importance of defect sites.