A series of fluorene‐based conjugated polymers containing the aggregation‐induced emissive (AIE)‐active tetraphenylethene and dicarboxylate pseudocrown as a receptor exhibits a unique dual‐mode sensing ability for selective detection of lead ion in water. Fluorescence turn‐off and turn‐on detections are realized in 80%–90% and 20% water in tetrahydrofuran (THF), respectively, for lead ion with a concentration as low as 10−8 m .
Anisometric polymer colloids are likely to behave differently when compared with centrosymmetric particles. Their study may not only shine new light on the organization of matter; they may also serve as building units with specific symmetries and complexity to build new materials from them. Polymer colloids of well‐defined complex geometries can be obtained by packing a limited number of spherical polymer particles into clusters with defined configurations. Such supracolloidal architectures can be fabricated at larger scales using narrowly dispersed emulsion droplets as templates. Assemblies built from at least two different types of particles as elementary building units open perspectives in selective targeting of colloids with specific properties, aiming for mesoscale building blocks with tailor‐made morphologies and multifunctionality. Polymer colloids with defined geometries are also ideal to study shape‐dependent properties such as the diffusion of complex particles.
Enzymatic catalysis and control over macromolecular architectures from reversible addition‐fragmentation chain transfer polymerization (RAFT) are combined to give a new method of making polymers. Horseradish peroxidase (HRP) is used to catalytically generate radicals using hydrogen peroxide and acetylacetone as a mediator. RAFT is used to control the polymer structure. HRP catalyzed RAFT polymerization gives acrylate and acrylamide polymers with relatively narrow molecular weight distributions. The polymerization is rapid, typically exceeding 90% monomer conversion in 30 min. Complex macromolecular architectures including a block copolymer and a protein‐polymer conjugate are synthesized using HRP to catalytically initiate RAFT polymerization.
Diarylbutadiyne derivatives are ideal monomers for providing the π‐electron‐conjugated system of polydiacetylenes (PDAs). The geometrical parameters for diacetylene topochemical polymerization are known. However, control of the molecules under these parameters is yet to be addressed. This work shows that by simply tailoring diarylbutadiyne with amide side‐chain substituents, the arrangement of the substituents and the resulting hydrogen bond framework allows formation of π‐electron‐conjugated PDA.
Cross‐linked azobenzene liquid‐crystalline polymer films with a poly(oxyethylene) backbone are synthesized by photoinitiated cationic copolymerization. Azobenzene moieties in the film surface toward the light source are simultaneously photoaligned during photopolymerization with unpolarized 436 nm light and thus form a splayed alignment in the whole film. The prepared films show reversible photoinduced bending behavior with opposite bending directions when different surfaces of one film face to ultraviolet light irradiation.
Poly‐(N‐isopropylacrylamide) (PNIPA) hydrogel films doped with uniaxially aligned liquid crystalline (LC) nanosheets adsorbed with a dye are synthesized and its anomalous photothermal deformation is demonstrated. The alignment of the nanosheet LC at the cm‐scale is easily achieved by the application of an in‐plane or out‐of‐plane AC electric field during photo‐polymerization. A photoresponsive pattern is printable onto the gel with μm‐scale resolution by adsorption of the dye through a pattern‐holed silicone rubber. When the gel is irradiated with light, only the colored part is photothermally deformed. Interestingly, the photo‐irradiated gel shows temporal expansion along one direction followed by anisotropic shrinkage, which is an anomalous behavior for a conventional PNIPA gel.
Amino‐acid‐based chiral surfactants with polymerizable moieties are synthesized, and a versatile approach to prepare particles thereof with a chiral surface functionality is presented. As an example of an application, the synthesized particles are tested for their ability as nucleating agents in the enantioselective crystallization of amino acid conglomerate systems, taking rac‐asparagine as a model system. Particles resulting from chiral surfactants with different tail groups are compared and the results demonstrate that only the chiral nanoparticles made of the polymerizable surfactant are able to act efficiently as nucleation agent in enantioselective crystallization.
Starting from readily available oleic and erucic acid, macrocyclic nonadecalactone (C19) and tricosalactone (C23) can be synthesized in polymerization grade purity in a four‐step reaction sequence. Ring‐opening polymerization (ROP) of these strainless macrolactones can be performed utilizing an enzyme as a catalyst. Despite the missing ring‐strain as key driving force for smaller (strained) lactones, high molar masses (M n ≈ 105 g mol−1) can be accessed in an entropically driven ROP. Polyester‐19 and polyester‐23 prepared feature melting temperatures well above 100 °C. Further analysis of the mechanical properties of these materials displays the resemblance to polyethylene. For example, Young's moduli on the order of 600 MPa are observed as a result of the high crystallinity of the polymer.
A novel type of emulsion gel based on star‐polymer‐stabilized emulsions is highlighted, which contains discrete hydrophobic oil and hydrophilic aqueous solution domains. Well‐defined phenol‐functionalized core‐crosslinked star polymers are synthesized via reversible addition‐fragmentation chain transfer (RAFT)‐mediated dispersion polymerization and are used as stabilizers for oil‐in‐water emulsions. Horseradish‐peroxidase‐catalyzed polymerization of the phenol moieties in the presence of H2O2 enables rapid formation of crosslinked emulsion gels under mild conditions. The crosslinked emulsion gels exhibit enhanced mechanical strength, as well as widely tunable composition.
Cationic polyelectrolytes showing an upper critical solution temperature (UCST) are synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization in water at a temperature well above the UCST. The polymerization is well controlled by the RAFT process, with excellent pseudo‐first‐order kinetics. The cloud point is highly dependent on the polyelectrolyte concentration, molecular weight, and presence of added electrolyte. Alkylation of a neutral polymer is also conducted to obtain polyelectrolytes with different hydrophobic groups, which are shown to increase the cloud point.
Janus particles with anisotropic biofunctionalities are perfect models to mimic anisotropic architectures and directional interactions that occur in nature. It is therefore highly desirable to develop reliable and efficient methods to synthesize biofunctional Janus particles. Herein, a facile method combining seeded‐emulsion polymerization and thiol‐click chemistry has been developed to synthesize Janus particles with glucose moieties on one side. These biofunctional Janus particles show region‐selective binding of protein, which represents a big step toward biomimicry, and demonstrates the potential of the bioJanus particles for targeted drug delivery and binding.
Diselenide‐containing polymers are facilely synthesized from polymers prepared by atom transfer radical polymerization (ATRP). Benefiting from the ATRP technology, this protocol provides a flexible route for controlling the polymer structure, which allows for a great variety of architectures of selenium‐containing polymer materials for applications in various fields. The oxidative and reductive responsive behavior of the obtained diselenide‐containing polymers is also investigated.
Novel macrocyclic amine‐linked oligocarbazole hollow microspheres are synthesized via a one‐step oxidative method in aqueous solution. Upon altering the oxidants and acidic media, the average diameters of the obtained hollow microspheres are tunable from 0.23 to 2.0 μm. With attractive amine and carbazole functionalities, exposed surface area, thermostability, and photoluminescent properties, the amine‐linked oligocarbazole hollow microspheres are directly assembled to yield heavy metal sorbents with excellent selectivity and recyclability, shown to efficiently remove lead from contaminated water.
Artificial special wetting surfaces have drawn much interest due to their important applications in many fields. Nevertheless, tremendous challenges still remain for the fabrication of wetting surfaces with durable and self‐healing properties. Here, recent progress of durable, self‐healing wetting surfaces is highlighted by discussing the fabrications of several typical wetting surfaces including superhydrophobic surfaces, superamphiphobic surfaces, underwater superoleophobic surfaces, and high hydrophilic antifouling surfaces based on expertise and related research experience. To conclude, some perspectives on the future research and development of these special wetting surfaces are presented.
The preparation of multifunctional polymers and block copolymers by a straightforward one‐pot reaction process that combines enzymatic transacylation with light‐controlled polymerization is described. Functional methacrylate monomers are synthesized by enzymatic transacylation and used in situ for light‐controlled polymerization, leading to multifunctional methacrylate‐based polymers with well‐defined microstructure.
Serial novel chiral polydiacetylenes (PDAs) are efficiently prepared at room temperature by the controllable electrophoretic deposition of diacetylenes with tunable structure as designed from easily available starting materials. The colorimetrically reversible properties of PDAs in the range between 25 and 85 °C are influenced by the different amino acid moiety in the PDAs as anticipated. The PDA containing aromatic ring is much better for the colorimetrically reversible properties, while irreversible thermochromism is displayed for the PDA with the structure of the longer methylene units in the main chain of amino acid moiety.
Cationic imidazolium‐functionalized polyethylene is accessible by insertion copolymerization of ethylene and allyl imidazolium tetrafluoroborate (AIm‐BF4) with phosphinesulfonato palladium(II) catalyst precursors. Imidazolium‐substituted repeat units are incorporated into the main chain and the initiating saturated chain end of the linear polymers, rather than the terminating unsaturated chain end. The counterion of the allyl imidazolium monomer is decisive, with the chloride analogue (AIm‐Cl) no polymerization is observed. Stoichiometric studies reveal the formation of an inactive chloride complex from the catalyst precursor. An effect of moderate densities (0.5 mol%) of ionic groups on the copolymers' physical properties is exemplified by an enhanced wetting by water.
Today's olefin metathesis catalysts show high reactivity, selectivity, and functional group tolerance and allow the design of new syntheses of precisely functionalized polymers. Here the synthesis of a new end‐capping reagent is investigated allowing the introduction of a highly reactive activated ester end‐group at the polymer chain end as well as its prefunctionalization to directly introduce functional moieties. The versatility of this new end‐capping reagent is demonstrated by utilizing it to synthesize a so‐called termimer (a monomer with termination capabilities). Copolymerization of a norbornene derivative with the termimer leads to hyperbranched ring‐opening metathesis polymerization polymers as proven by gel permeation chromatography and MALDI‐ToF‐(matrix‐assisted laser desorption/ionization time of flight) mass spectrometry.
Sodium alginate (SA), acting as a trypsin inhibitor by means of electrostatic interaction, is studied. The half‐maximal inhibitory concentration (IC50 = 0.05 μg mL−1) of this natural anionic polymer is about 400 times lower than that of commercial soybean trypsin inhibitor (STI). Unlike the Ca2+‐deprivation mechanisms, its inhibition may be attributed to preventing the trypsin active site (TAS) from accessing the macromolecular substrates instead of denaturing it. SA is an efficient, innocuous, and cost‐effective inhibitory excipient that can be conveniently used in many peptide and protein dosage formulations.
The controlled folding of a single polymer chain is for the first time realized by metal‐ complexation. α,ω‐Bromine functional linear polymers are prepared via activators regenerated by electron transfer (ARGET) ATRP (,SEC = 5900 g mol−1, Đ = 1.07 and 12 000 g mol−1, Đ = 1.06) and the end groups of the polymers are subsequently converted to azide functionalities. A copper‐catalyzed azide–alkyne cycloaddition (CuAAC) reaction is carried out in the presence of a novel triphenylphosphine ligand and the polymers to afford homotelechelic bis‐triphenylphosphine polymeric‐macroligands (MLs) (,SEC = 6600 g mol−1, Đ = 1.07, and 12 800 g mol−1, Đ = 1.06). Single‐chain metal complexes (SCMCs) are formed in the presence of Pd(II) ions in highly diluted solution at ambient temperature. The results derived via 1H and 31P{1H} NMR experiments, SEC, and DLS unambiguously evidence the efficient formation of SCMCs via metal ligand complexation.
