A self‐healable gas barrier nanocoating, which is fabricated by alternate deposition of polyethyleneimine (PEI) and polyacrylic acid (PAA) polyelectrolytes, is demonstrated in this study. This multilayer film, with high elastic modulus, high glass transition temperature, and small free volume, has been shown to be a super oxygen gas barrier. An 8‐bilayer PEI/PAA multilayer assembly (≈700 nm thick) exhibits an oxygen transmission rate (OTR) undetectable to commercial instrumentation (<0.005 cc (m−2 d−1 atm−1)). The barrier property of PEI/PAA nanocoating is lost after a moderate amount of stretching due to its rigidity, which is then completely restored after high humidity exposure, therefore achieving a healing efficiency of 100%. The OTR of the multilayer nanocoating remains below the detection limit after ten stretching‐healing cycles, which proves this healing process to be highly robust. The high oxygen barrier and self‐healing behavior of this polymer multilayer nanocoating makes it ideal for packaging (food, electronics, and pharmaceutical) and gas separation applications.
Biaxially oriented polypropylene (BOPP) is widely used in packaging. Although its orientation increases mechanical strength and clarity, BOPP suffers from a high oxygen transmission rate (OTR). Multilayer thin films are deposited from water using layer‐by‐layer (LbL) assembly. Polyethylenimine (PEI) is combined with either poly(acrylic acid) (PAA) or vermiculite (VMT) clay to impart high oxygen barrier. A 30‐bilayer PEI/VMT nanocoating (226 nm thick) improves the OTR of 17.8 μm thick BOPP by more than 30X, rivaling most inorganic coatings. PEI/PAA multilayers achieve comparable barrier with only 12 bilayers due to greater thickness, but these films exhibit increased oxygen permeability at high humidity. The PEI/VMT coatings actually exhibit improved oxygen barrier at high humidity (and also improve moisture barrier by more than 40%). This high barrier BOPP meets the criteria for sensitive food and some electronics packaging applications. Additionally, this water‐based coating technology is cost effective and provides an opportunity to produce high barrier polypropylene film on an industrial scale.
In an effort to impart light gas (i.e., H2 and He) barrier to polymer substrates, thin films of polyethylenimine (PEI), poly(acrylic acid) (PAA), and montmorrilonite (MMT) clay are deposited via layer‐by‐layer (LbL) assembly. A five “quadlayer” (122 nm) coating deposited on 51 μm polystyrene is shown to lower both hydrogen and helium permeability three orders of magnitude against bare polystyrene, demonstrating better performance than thick‐laminated ethylene vinyl‐alcohol (EVOH) copolymer film and even metallized polyolefin/polyester film. These excellent barrier properties are attributed to a “nanobrick wall” structure. This highly flexible coating represents the first demonstration of an LbL deposited film with low hydrogen and helium permeability and is an ideal candidate for several packaging and protection applications.
Hierarchical self‐assembly of transient composite hydrogels is demonstrated through a two‐step, orthogonal strategy using nanoparticle tectons interconnected through metal–ligand coordination complexes. The resulting materials are highly tunable with moduli and viscosities spanning many orders of magnitude, and show promising self‐healing properties, while maintaining complete optical transparency.
A novel and non‐cytotoxic self‐healing supramolecular elastomer (SE) is synthesized with small‐molecular biological acids by hydrogen‐bonding interactions. The synthesized SEs behave as rubber at room temperature without additional plasticizers or crosslinkers, which is attributed to the phase‐separated structure. The SE material exhibits outstanding self‐healing capability at room temperature and essential non‐cytotoxicity, which makes it a potential candidate for biomedical applications.
The surface of polyacrylonitrile (PAN) film is treated with ethyleneamines (EDA) in a simple chemical vapor phase reaction. Successful introduction of amine functional groups on the cyano group of PAN backbone is verified by FT‐IR and NMR measurements. Further UV‐vis and photoluminescence analyses show a red shift of the emission peak after repeated EDA treatment, which might be attributed to the formation of imine conjugation from newly formed carbon‐nitrogen bonds on the PAN backbone. Further confocal laser scanning microscopy reveals that selective patterning of EDA on PAN films is possible via local polydimethylsiloxane masking. The results indicate that both chemical and optical patterning on PAN film can be realized via a single reaction and show the potential of this novel methodology in selective patterning.
Layer‐by‐layer (LbL) assembly has emerged as the leading non‐vacuum technology for the fabrication of transparent, super gas barrier films. The super gas barrier performance of LbL deposited films has been demonstrated in numerous studies, with a variety of polyelectrolytes, to rival that of metal and metal oxide‐based barrier films. This Feature Article is a mini‐review of LbL‐based multilayer thin films with a ‘nanobrick wall’ microstructure comprising polymeric mortar and nanoplatelet bricks that impart high gas barrier to otherwise permeable polymer substrates. These transparent, water‐based thin films exhibit oxygen transmission rates below 5 × 10‐3 cm3 m‐2 day‐1 atm‐1 and lower permeability than any other barrier material reported. In an effort to put this technology in the proper context, incumbent technologies such as metallized plastics, metal oxides, and flake‐filled polymers are briefly reviewed.
Inspired by the molecular mechanics of mussel adhesive formation, a novel water‐soluble fluorescent macromolecule (polydopamine–polyethyleneimine (PDA–PEI)) is prepared by one‐pot copolymerization of dopamine (DA) and PEI. In this method, DA is polymerized to form PDA, which is then coupled with PEI mainly through Michael addition. The fluorescence property of PDA–PEI is mainly attributed to the Michael addition of PEI on the 5,6‐dihydroxyindole (DHI) units of PDA, where PEI can form hydrogen bonds with oxidative products such as DHI and force the DHI units to twist out of plane, resulting in a decrease in the intra‐ and intermolecular coupling of PDA. In addition, the influence of various metal cations on the fluorescence of the PDA–PEI copolymer is investigated. This work may facilitate the development of new strategies for controlling the emission characteristics of PDA.
In this study, the group transfer polymerization (GTP) of the functional monomer 3‐(trimethoxysilyl)propyl methacrylate (TMSPMA) is reported to produce polymers of different architectures and topologies. TMSPMA is successfully polymerized and copolymerized with GTP to produce well‐defined (co)polymers that can be used to fabricate functional hybrid materials like hydrogels and films.
Aggregation‐induced emission (AIE) is an abnormal phenomenon that has sparked great attention for diverse applications in different fields. In particular, the fabrication and biological imaging applications of AIE‐active fluorescent organic nanoparticles (FONs) have become a focus in the emerging and promising fields. A large number of AIE‐active polymeric nanoprobes have recently been fabricated through different strategies. The advances and progress in this direction have also recently been summarized by some groups. However, the fabrication and biomedical applications of AIE‐active FONs based on carbohydrate polymers and AIE‐active dyes are quite rare and limited. In this feature article, the recently reported AIE‐active FONs with different structures and applications based on AIE‐active dyes and carbohydrate polymers are highlighted, and the major current limitations and development tendencies are also discussed.
Hierarchical semicrystalline block copolymer nanoparticles are produced in a segmented gas‐liquid microfluidic reactor with top‐down control of multiscale structural features, including nanoparticle morphologies, sizes, and internal crystallinities. Control of multiscale structure on disparate length scales by a single control variable (flow rate) enables tailoring of drug delivery nanoparticle function including release rates.
The directed self‐assembly of gold nanoparticles through the crystallization of surface‐grafted polyethylene oxide (PEO) in ethanol–water mixtures is described. This process is fully reversible and tunable through either the size of the core or the polymeric coating. Characterization by X‐ray scattering and electron microscopy of the self‐assembled structures reveals order at the nanoscale, typically not the case for thermoresponsive gold nanoparticles coated with lower or upper critical solution temperature polymers. A further novelty is the result of selective binding of calcium ions to the PEO in the fluid state: a reversible thermoresponsive transition become irreversible.
Copolymers of 2‐(methacrylamido)glucopyranose (MAG) and methacrylic acid (MAA) are synthesized by RAFT polymerization and then used as templates to prepare glycopolymer‐functionalized Ag nanoclusters (Gly‐Ag NCs) through microwave irradiation. Polymers and the resulting nanoclusters are characterized by NMR, GPC, UV‐Vis, SEM, TEM, AAS and fluorescence spectroscopy. The bio‐activity of the fluorescent Gly‐Ag NCs are further examined using GLUT‐1 over‐expressing cancer cells K562. Gly‐Ag NCs show efficient binding ability toward K562 cells and inhibit the cell viability in a dose dependent manner (IC50 = 0.65 μg mL–1), indicating their potential biological applications for both cancer imaging and targeted cancer therapy.
Monoamino functionalized ethylenoxide (EO)/propylenoxide oligomers (Jeffamine) are linked chemically to poly(vinyl chloride) (PVC) using trichlorotriazine chemistry in order to prepare nonmigrating internally plasticized materials. The dependence of the plasticizer efficiency on both the number of anchoring points to the chains and the PVC/plasticizer compatibility is investigated using oligomers of different molecular weight and hydrophilic–hydrophobic balance. Hydrophilic oligomers (containing predominantly EO) of molecular weights between 2000 and 5000 g mol−1 exhibit excellent plasticizer efficiency, nearly identical to di‐2‐ethylhexylphthalate (DOP) in conventional PVC/DOP mixtures and may therefore be used as nonmigrating equivalents for DOP.
The synthesis and electrochemical characterization of novel polymers bearing phenoxyl‐radicals as redox‐active side chains is described. The monomers are synthesized from the corresponding phenols and quinones, respectively. These compounds are subsequently polymerized via ring‐opening metathesis polymerization. The electrochemical properties of the phenoxyl‐radical polymers are characterized using cyclic voltammetry and the most promising polymer is investigated as active material in a lithium coin‐cell, creating the first phenoxyl‐lithium battery. These phenoxyl‐containing polymers represent interesting anode materials for organic radical and lithium batteries due to their suitable redox‐potentials and possibility to create batteries with higher potentials as well as straightforward synthesis procedures.
Here, the preparation of a novel block copolymer consisting of a statistical copolymer N‐(2‐hydroxypropyl) methacrylamide‐s‐N‐(3‐aminopropyl) methacrylamide and a short terminal 3‐guanidinopropyl methacrylamide block is reported. This polymer structure forms neutral but water‐soluble nanosized complexes with siRNA. The siRNA block copolymer complexes are first analyzed using agarose gel electrophoresis and their size is determined with fluorescence correlation spectroscopy. The protective properties of the polymer against RNA degradation are investigated by treating the siRNA block copolymer complexes with RNase V1. Heparin competition assays confirm the efficient release of the cargo in vitro. In addition, the utilization of microscale thermophoresis is demonstrated for the determination of the binding strength between a fluorescently labeled polyanion and a polymer molecule.
Molecular bottle‐brush functionalized single‐walled carbon nanotubes (SWCNTs) with superior dispersibility in water are prepared by a one‐pot synthetic methodology. Elongating the main‐chain and side‐chain length of molecular bottle‐brushes can further increase SWCNT dispersibility. They show significant enhancement of SWCNT dispersibility up to four times higher than those of linear molecular functionalized SWCNTs.
The preparation of multifunctional polymers and block copolymers by a straightforward one‐pot reaction process that combines enzymatic transacylation with light‐controlled polymerization is described. Functional methacrylate monomers are synthesized by enzymatic transacylation and used in situ for light‐controlled polymerization, leading to multifunctional methacrylate‐based polymers with well‐defined microstructure.
Polyurethane (PU) monomer mixtures containing commercially available o‐nitrobenzyl‐based photocleavable monomers have been formulated and tested as low‐cost positive tone photoresists. The photolysis reaction is studied by UV spectroscopy. Well‐defined micropatterns on 2 μm thick photodegradable PU films are obtained using 365 nm light exposure. This strategy is also extended to improved formulations based on synthesized o‐nitrobiphenylpropyl derivatives with enhanced photochemical properties for single photon excitation and high two‐photon absorption cross‐sections. Improved pattern resolution in 2D and the capability of 3D resolution using a scanning laser at 780 nm is demonstrated. This work demonstrates the potential of PUs as readily available, versatile, and easy‐to‐use photoresist materials for low‐cost lithography applications.
Thermomechanical properties of neat phosphine‐catalyzed thiol‐Michael networks fabricated in a controlled manner are reported, and a comparison between thiol‐acrylate and thiol‐vinyl sulfone step‐growth networks is performed. When highly reactive vinyl sulfone monomers are used as Michael acceptors, glassy polymer networks are obtained with glass transition temperatures ranging from 30 to 80 °C. Also, the effect of side‐chain functionality on the mechanical properties of thiol‐vinyl sulfone networks is investigated. It is found that the inclusion of thiourethane functionalities, aryl structures, and most importantly the elimination of interchain ester linkages in the networks significantly elevate the network's glass transition temperature as compared with neat ester‐based thiol‐Michael networks.
