Amphiphilic Hybrid π‐Conjugated Polymers Containing Polyhedral Oligomeric Silsesquioxanes

Amphiphilic hybrid π‐conjugated polymers that have polyhedral oligomeric silsesquioxanes on their side chains have been successfully synthesized by the Sonogashira–Hagihara polycondensation reaction. The obtained polymers were studied with ultraviolet‐visible absorption and photoluminescence spectra. In these polymers, the π‐conjugation length was extended along the poly(p‐phenylene‐ethynylene) backbone. Furthermore, the content of the POSS substituents can influence the aggregation behavior of the polymers and subsequent luminescent properties.

     

Aromatic Ring‐Fused Carborane‐Based Luminescent π‐Conjugated Polymers

A series of π‐conjugated polymers linked by benzocarborane (1,2‐(buta‐1′,3′‐diene‐1′,4′‐diyl)‐1,2‐dicarbadodecaborane) were synthesized via Sonogashira–Hagihara polycondensation reaction. The opened molecular structure of diiodo monomer containing benzocarborane resulted in fast polymerization and high molecular weights. The obtained polymers were fully characterized by ¹H, ¹³C, and ¹¹B NMR spectroscopies. UV‐vis absorption and photoluminescence studies revealed the acceptor‐profile of benzocarborane. Unlike the polymers linked by o‐carborane, these polymers exhibited strong luminescence in the solution state, presumably because the inductive effect of carborane is dominant, rather than cage‐π interactions.

     

Covalently Scaffolded Inter‐π‐System Orientations in π‐Conjugated Polymers and Small Molecule Models

Organic π‐conjugated polymers have emerged as one of the most fascinating classes of materials as they have found utility in a host of plastic electronics technologies. The distance between π‐systems and their relative orientation dictate energy/charge transfer, conductivity, and photophysical properties of these materials in bulk. This Feature Article discusses π‐conjugated polymers and model compounds in which specific inter‐π‐system interactions are covalently enforced and the effect that the scaffolding has on optoelectronic properties.

     

New π‐Conjugated Polymers Containing 1,3,5‐Triazine Units in the Main Chain: Synthesis and Optical and Electrochemical Properties of the Polymers

Summary: Three new soluble π‐conjugated polymers containing 1,3,5‐triazine units in the main chain, Pa–Pc, were synthesized. The polymers showed optical properties in solution that were mainly dependant on the properties of the substituting R groups, on the triazine ring. Hence, Pa and Pb (R = H and  OCH₃, respectively) showed blue photoluminescent (PL) emission with high quantum yields (QY) even in polar solvents, whereas Pc (R = N,N‐dimethylamino) gave green‐blue PL emission with very low QY. The PL spectra of the polymers in solution were concentration and polarity dependent, which suggested the formation of an exciplex.

The three new soluble π‐conjugated polymers containing 1,3,5‐triazine units in the main chain synthesized here.     

Random copolymers based on 3‐hexylthiophene and benzothiadiazole with induced π‐conjugation length and enhanced open‐circuit voltage property for organic photovoltaics

A series of donor‐acceptor low‐bandgap conjugated polymers, that is, HThmBT (m = 3, 6, 9, 12, 15), composed of regioregular 3‐hexylthiophene segments and 2,1,3‐benzothiadiazole units, were synthesized through the Stille coupling polymerization to optimize the π‐conjugation length of the polymer and the intramolecular charge transfer (ICT) effect in the polymer backbone. The polymers had relatively low optical bandgaps ranging from 1.6 to 1.72 eV. Among these polymers, HTh6BT exhibited the best device performance with a power conversion efficiency (PCE) of 1.6%. Moreover, despite being based on thiophene, HTh6BT exhibited a high‐open circuit voltage (V_OC) of over 0.8 V because of its low high occupied molecular orbital (HOMO) energy level. These results provided an effective strategy for designing and synthesizing low‐bandgap conjugated polymers with broad absorption ranges and well‐balanced energy levels. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

New π‐Conjugated polymers containing 4H,4′H‐[1,1′‐Bithieno [3,4‐C]Pyrrole]‐4,4′,6,6′(5H,5′H)‐Tetraone (biTPD) units and their application to thin‐Film transistors and photovoltaic cells

We successfully synthesized new D‐A copolymers that employ 1,10‐bithienopyrrolodione (biTPD), thiophene, and selenophene‐based donor monomeric units. Two polymers, PBTPDEBT and PBTPDEBS , exhibited high degrees of crystallinity and unique polymer chain arrangements on the substrate, which is attributed to their enhanced coplanarity and intermolecular interactions between the polymer chains. Among the thin‐film transistor devices made of PBTPDEBT and PBTPDEBS , the annealed PBTPDEBS device displayed relatively high hole mobility, which was twice that of the PBTPDEBT ‐based device. In addition, an organic photovoltaic device based on a PBTPDEBS :PC₇₁BM blend displayed the maximum power conversion efficiency of 3.85%. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1228–1235     

Benzodifuran‐containing well‐defined π‐conjugated polymers for photovoltaic cells

Two well‐defined alternating π‐conjugated polymers containing a soluble electroactive benzo[1,2‐b:4,5‐b′]difuran (BDF) chromophore, poly(BDF‐(9‐phenylcarbazole)) (PBDFC), and poly(BDF‐benzothiadiazole) (PBDFBTD) were synthesized via Sonogashira copolymerizations. Their optical, electrochemical, and field‐effect charge transport properties were characterized and compared with those of the corresponding homopolymer PBDF and random copolymers of the same overall composition. All these polymers cover broad optical absorption ranges from 250 to 750 nm with narrow optical band gaps of 1.78–2.35 eV. Both PBDF and PBDFBTD show ambipolar redox properties with HOMO levels of ?5.38 and ?5.09 eV, respectively. The field‐effect mobility of holes varies from 2.9 × 10^?8 cm² V^?1 s^?1 in PBDF to 1.0 × 10^?5 cm² V^?1 s^?1 in PBDFBTD. Bulk heterojunction solar cell devices were fabricated using the polymers as the electron donor and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester as the electron acceptor, leading to power conversion efficiencies of 0.24–0.57% under air mass 1.5 illumination (100 mW cm^?2). These results indicate that their band gaps, molecular electronic energy levels, charge mobilities, and molecular weights are readily tuned by copolymerizing the BDF core with different π‐conjugated units. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Advances in Star‐Shaped π‐Conjugated Systems: Properties and Applications

Until recently π‐conjugated organic materials are based mainly on linear systems. Recent years, however, have brought about increasing interest in molecules boasting a dendritic, branched, or star‐shaped architecture. This tendency is a direct result of the ongoing search for materials with progressively better properties. Such compounds, featuring novel, 3D architectures, exhibit a multitude of interesting qualities, making them stand out from well‐known materials. The direction of star‐shaped compound application is determined by whether they are able to form aggregates, π‐stacks. This feature is a source of some astounding properties, coveted in numerous applications. Among this class of compounds high charge mobility, high fluorescence efficiency, and good charge separation are all found. Depending on the structure of the core, the molecule may adopt various types of symmetry. Similarly, the conjugation of orbitals may extend over the whole structure or be interrupted at chosen segments. The number of papers pertaining to star‐shaped oligomers and polymers is ascending with each year, evidencing a growing interest in them. Consequently, this Review focuses particularly on the most recent reports concerning modification of the structure and properties of the aforementioned type of compounds, as well as on the development of devices based on them.

     

Transition‐Metal‐Free Synthesis of 1,3‐Butadiene‐Containing π‐Conjugated Polymers

This work describes the synthesis of π‐conjugated polymers possessing arylene and 1,3‐butadiene alternating units in the main chain by the reaction of α,β‐unsaturated ester/nitrile containing γ‐H with aromatic/heteroaromatic aldehyde compound. By using 4‐(4‐formylphenyl)‐2‐butylene acid ethyl ester as a model monomer, the different polymerization conditions, including catalyst, catalyst amount, and solvent, are optimized. The polymerization of 4‐(4‐formylphenyl)‐2‐butylene acid ethyl ester is carried out by refluxing in ethanol for 72 h with 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) as a catalyst to give a 1,3‐butadiene‐containing π‐conjugated polymer, poly(phenylene‐1,3‐butadiene), in 84.3% yield with and / (PDI) estimated as 6172 and 1.65, respectively. Based on this new methodology, a series of π‐conjugated polymers containing 1,3‐butadiene units with different substituents are obtained in high yields. A possible mechanism is proposed for the polymerization through a six‐membered ring transition state and then a 1,5‐H shift intermediate.

     

Ambipolar Field‐Effect Transistor (FET) and Redox Characteristics of a π‐Conjugated Thiophene/1,3,4‐Thiadiazole CT‐Type Copolymer

Summary: A π‐conjugated charge transfer‐type copolymer consisting of an electron‐donating thiophene and an electron‐accepting 1,3,4‐thiadiazole, P(ThdzTh), underwent facile electrochemical p‐ and n‐doping, as revealed by cyclic voltammetry. The copolymer gave a new ambipolar field‐effect transistor (FET), which showed typical I_DS (source–drain current)–V_DS (source–drain voltage) curves in both a p‐type working mode and an n‐type working mode. In the n‐type working mode, the polymer showed a carrier mobility of about 5 × 10⁻³ cm² · V⁻¹ · s⁻¹ and an on/off ratio of about 3 × 10⁴.

n‐Channel field‐effect transistor characteristics of P(ThdzTh).     

Two‐Dimensional Conducting Polymers: Synthesis and Charge Transport

Current technological advances and prolific endeavors have entrenched two‐dimensional conducting polymers as the rapidly emerging interface across a diversity of functional materials for flexible electronics, sensors, ion‐exchange membranes, biotechnology, catalysis, energy storage, and conversion. Rational design and fabrication of polymeric nanostructures enriched with well‐ordered geometry are appealing and endorse significant impact on their in‐built electrical, optical, and mechanical properties. In particular, recent interest in controlled hierarchical assembly of monomers/oligomers proved the free‐standing sheet‐like structures with exotic features of high conductivity and flexibility. Yet, the ongoing research to make nanometer‐thick polymers suffers from limitations to access large‐area, mechanical stability, and high‐range internal ordering. In this perspective, we focus on the radical approaches that highlight confinement‐entitled features of two‐dimensional polymeric materials correlating to their interface or template‐assisted synthesis, structure–property relationship, charge transport properties, and future scopes for relevant practical enactments. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1169–1176     

Synthesis,Characterization and Optical Properties of a Novel Si‐Containing σ‐π‐Conjugated Hyperbranched Polymer

The polymerization of bis(4‐ethynylphenyl)methylsilane catalyzed by RhI(PPh₃)₃ afforded a regio‐ and stereoregular hyperbranched polymer, hb‐poly[(methylsilylene)bis(1,4‐phenylene‐trans‐vinylene)] (poly( 1 )), containing 95% trans‐vinylene moieties. The weight loss of this polymer at 900°C in N₂ was 9%. Poly( 1 ) displayed an absorption due to π‐π* transition around 275 nm as a shoulder and a weak absorption around 330 nm due to π‐to‐σ charge transfer, which was hardly seen in the corresponding linear polymer.     

β‐Cyclodextrin Pseudopolyrotaxanes with π‐Conjugated Polymer Axles

Summary: β‐Cyclodextrin (β‐CD) pseudopolyrotaxanes containing poly(thiophene‐2,5‐diyl), PTh , or poly(3‐methylthiophene‐2,5‐diyl)s, P3MeTh s, as an axle were prepared. Structures of the pseudopolyrotaxanes and their inclusion behavior with β‐CD were investigated. The UV‐vis measurements revealed that inclusion of P3MeTh s by β‐CD depended on the flexibility of the main chain and their molecular weight.

Formation of the inclusion complex of β‐CD and PTh .     

Synthesis and optical and electrochemical properties of new π‐conjugated 1,3,5‐triazine‐containing polymers

Two new π‐conjugated polymers containing 1,3,5‐triazine units in the main chain, Pa and Pb , are reported. Pa and Pb (R = H and ? OCH₃, respectively) showed blue photoluminescence emissions with quantum yields of more than 50% in toluene. In the solid state, Pa and Pb showed photoluminescence maximum emission peaks at 479 and 475 nm, respectively. Electrochemically, Pa and Pb showed good stability and reversibility under repeated electrochemical reduction. The polymers had glass‐transition temperatures higher than 90 °C and had 5 wt % loss temperatures higher than 400 °C. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6554–6561, 2005     

π‐Conjugated Microporous Polymer Films: Designed Synthesis,Conducting Properties,and Photoenergy Conversions

Conjugated microporous polymers are a unique class of polymers that combine extended π‐conjugation with inherent porosity. However, these polymers are synthesized through solution‐phase reactions to yield insoluble and unprocessable solids, which preclude not only the evaluation of their conducting properties but also the fabrication of thin films for device implementation. Here, we report a strategy for the synthesis of thin films of π‐conjugated microporous polymers by designing thiophene‐based electropolymerization at the solution–electrode interface. High‐quality films are prepared on a large area of various electrodes, the film thickness is controllable, and the films are used for device fabrication. These films are outstanding hole conductors and, upon incorporation of fullerenes into the pores, function as highly efficient photoactive layers for energy conversions. Our film strategy may boost the applications in photocatalysis, energy storage, and optoelectronics.     

Construction of Large‐Scale Highly Ordered Macroporous Monoliths of π‐Conjugated Polymers

Large scale of well‐ordered macroporous π‐conjugated polymer monoliths have been successfully prepared through a new approach using micrometer‐sized naphthalene crystals as templates. The macroporous monoliths of poly(p‐phenylenevinylene) (PPV) and poly(p‐phenyleneethynylene) (PPE) grew along the unidirectional freezing direction inside the template naphthalene crystals which lead to the formation of controlling morphologies and homogeneous diameters. The polymer monoliths show straight and lamella macroporous structures. The diameters of pores and the thickness of pore walls can be controlled by tuning the freezing temperature.

     

Doping the Backbone of π‐Conjugated Polymers with Tricoordinate Boron: Synthetic Strategies and Emerging Applications

The doping of π‐conjugated organic compounds with trivalent boron atoms produces materials with intriguing properties and functions that result from the interaction of the π‐electron system with the vacant p orbital on boron. This offers unique opportunities in various applications such as organic (opto)electronics, biomedical imaging, and sensors for physiologically relevant anions or amines, as demonstrated by numerous examples on the molecular scale. Recently, the B‐doping strategy has been expanded to polymer chemistry with a view to benefit from the best of both worlds. Herein, recent advances in the synthesis of π‐conjugated polymers doped with tricoordinate boron in the backbone are reviewed. Selected applications are described where these functional materials have already been successfully implemented.     

Electron Transport through Single π‐Conjugated Molecules Bridging between Metal Electrodes

Understanding electron transport through a single molecule bridging between metal electrodes is a central issue in the field of molecular electronics. This review covers the fabrication and electron‐transport properties of single π‐conjugated molecule junctions, which include benzene, fullerene, and π‐stacked molecules. The metal/molecule interface plays a decisive role in determining the stability and conductivity of single‐molecule junctions. The effect of the metal–molecule contact on the conductance of the single π‐conjugated molecule junction is reviewed. The characterization of the single benzene molecule junction is also discussed using inelastic electron tunneling spectroscopy and shot noise. Finally, electron transport through the π‐stacked system using π‐stacked aromatic molecules enclosed within self‐assembled coordination cages is reviewed. The electron transport in the π‐stacked systems is found to be efficient at the single‐molecule level, thus providing insight into the design of conductive materials.     

Stabilization and Large Nonlinearity of Gold Nanoparticles Functionalized with a π‐Conjugated Polymer

Gold nanoparticles protected by a novel π‐conjugated polymer [poly(p‐phenylene ethynylene) containing pendent disulfide and bipyridine groups] are synthesized and characterized. The polymer can stabilize the gold nanoparticles effectively. The nonlinear optical properties of the gold nanoparticle colloid solutions in toluene are investigated by using the Z‐scan technique at a wavelength of 532 nm and pulse width of 4 ns. The gold‐nanoparticle colloid solutions show an exceptional nonlinear absorption effect, which simultaneously contains the saturated absorption resulting from third‐order nonlinearity and a large reverse‐saturated absorption resulting from fifth‐order nonlinearity. In addition, asymmetric self‐focusing refractive effects are investigated in the colloid solutions.