Multiwall carbon nanotubes (MWNT) were modified orderly with carboxyl groups and amino groups. The MWNT/gold nanoparticle composites were formed when the amino‐functionalized MWNT was interacted with gold colloids. The functionalized MWNT was characterized using Fourier transform infrared spectroscopy and X‐ray photoelectron spectroscopy. The amino‐functionalized MWNT allows further attaching gold nanoparticles through electrostatic interaction between the negatively charged gold nanoparticles and amino groups on the surface of the MWNT. The composite of gold nanoprticles and amino‐functionalized MWNT was characterized by transmission electron microscopy. This method decorating carbon nanotubes can be used to identify the location of functional groups, i.e. defect sites on carbon nanotubes. 相似文献
Carbon-based tubular materials have sparked a great interest in future electronics and optoelectronics device applications. In this work, we computationally studied the mechanical properties of nanotubes generated from popgraphene (PopNTs). Popgraphene is a 2D carbon allotrope composed of 5-8-5 rings. We carried out fully atomistic reactive (ReaxFF) molecular dynamics for PopNTs of different chiralities ( and ) and/or diameters and at different temperatures (from 300 up to 1200 K). Results showed that the tubes are thermally stable (at least up to 1200 K). All tubes presented stress/strain curves with a quasi-linear behavior followed by an abrupt drop of stress values. Interestingly, armchair-like PopNTs ( ) can stand a higher strain load before fracturing when contrasted to the zigzag-like ones ( ). Moreover, it was obtained that Young's modulus (YMod) (750–900 GPa) and ultimate strength (σUS) (120–150 GPa) values are similar to the ones reported for conventional armchair and zigzag carbon nanotubes. YMod values obtained for PopNTs are not significantly temperature-dependent. While the σUS values for the showed a quasi-linear dependence with the temperature, the exhibited no clear trends. 相似文献
Hybridization of multi wall carbon nanotubes (MWCNTs) with other filler in polymer matrix composites (PMC) is one of the techniques for combining different properties of fillers for making more unique composites. In this work, the hybrid filler (CNTs–dolomite) are prepared via chemical vapour deposition (CVD hybrid) and the milling method (physically hybrid). The effect of different hybrid method on properties of multi wall carbon nanotubes/dolomite hybrid filled phenolic composites were studied. Phenolic/CVD hybrid composites and phenolic/physically hybrid composites with different filler loadings were prepared using hot mounting press. The prepared samples were characterized for their thermal conductivity and hardness. The thermal conductivity was measured using the Transient Plane Source (TPS) method, using a Hot-DiskTM Thermal Constant Analyzer and the hardness was measured using Rockwell micro-hardness. The results showed that at 5% filler loading, the phenolic/CVD hybrid composites were capable of increasing the thermal conductivity and micro-hardness up to 7.22% and 101.6% respectively compared to pure phenolic. 相似文献
Composites of carbon nanotubes (CNT) in polymeric matrices have attracted considerable attention in the research communities due to their good electrical conductivity, high stiffness and high strength at relatively low CNT contents. Effective utilization of CNT in composites depends primarily on the ability to disperse them homogeneously throughout the polymer matrix, avoiding the formation of bundles due to van der Waals interactions existing between the nanotubes. In this work composites of polystyrene at various percentages of SWNT were fabricated using Latex Technology technique, a polymer type-independent method based on using a surfactant as a dispersing agent. An electrical characterization of SWNT composites was performed both in DC and AC modes. From the analysis of DC data a percolative behavior was found for the conductivity as function of SWNT content. The innovative contribution of this work consists in the modeling of the composite material upon its electrical properties. AC measurements and the analysis of impedance as function of angular frequency lead to the formulation of an equivalent circuit able to model the composite material in correspondence of the percolative threshold. 相似文献
Methyl Methacrylate(MMA) has been filled in the apertures of aligned carbon nanotubes(ACNTs). Then PMMA/ACNTs composites have been synthesized by in-situ polymerization. The SEM results show that carbon nanotubes are well dispersed and directionally arranged in the composites. The electrical conductivities of the parallel direction (parallel with ACNTs) and perpendicular direction (perpendicular with ACNTs) of composites were respectively tested to be 15 S·cm-1 and 4 S·cm-1, so the composites were conductivity anisotropic. Compared with PMMA, the thermal stable temperature of composites in air was improved by 100 ℃,and the thermal conductivity of composites was 13.64 times of PMMA. 相似文献
Multiwalled carbon nanotubes in the form of bucky papers were modified using Ar/O2 plasma and thereafter melt‐mixed into polycarbonate. The effect of plasma modification on the nanotubes was followed by XPS, indicating the formation of carboxylic or ester groups at the nanotube surfaces. In the melt‐mixed nanocomposites, the modified nanotubes exhibited a better macrodispersion and better phase adhesion to the matrix as evidenced by morphological investigations. The electrical percolation threshold was not altered and occurred below 0.5 wt.‐% nanotubes. The mechanical properties were improved by having higher values of stress at yield, stress beyond the yield point, and strain at break illustrating the effect of both better dispersion and enhanced phase adhesion.
