UV‐Light‐Induced Hydrogen Transfer in Guanosine–Guanosine Aggregates

Aggregates of a lipophilic guanine (G) derivative have been studied in n‐hexane by femtosecond‐to‐microsecond UV‐visible broadband transient absorption, stationary infrared and UV‐visible spectroscopy and by quantum chemical calculations. We report the first time‐resolved spectroscopic detection of hydrogen transfer in GG aggregates, which leads to (G?H) ^. radicals by means of G⁺G^? charge transfer followed by proton transfer. These radicals show a characteristic electronic spectrum in the range 300–550 nm. The calculated superimposed spectrum of the species that result from NH???N proton transfer agrees best with the experimental spectrum.     

DNA–Polymer Nanostructures by RAFT Polymerization and Polymerization‐Induced Self‐Assembly

Nanostructures derived from amphiphilic DNA–polymer conjugates have emerged prominently due to their rich self‐assembly behavior; however, their synthesis is traditionally challenging. Here, we report a novel platform technology towards DNA–polymer nanostructures of various shapes by leveraging polymerization‐induced self‐assembly (PISA) for polymerization from single‐stranded DNA (ssDNA). A “grafting from” protocol for thermal RAFT polymerization from ssDNA under ambient conditions was developed and utilized for the synthesis of functional DNA–polymer conjugates and DNA–diblock conjugates derived from acrylates and acrylamides. Using this method, PISA was applied to manufacture isotropic and anisotropic DNA–polymer nanostructures by varying the chain length of the polymer block. The resulting nanostructures were further functionalized by hybridization with a dye‐labelled complementary ssDNA, thus establishing PISA as a powerful route towards intrinsically functional DNA–polymer nanostructures.     

UV‐Induced Tetrazole‐Thiol Reaction for Polymer Conjugation and Surface Functionalization

A UV‐induced 1,3‐dipolar nucleophilic addition of tetrazoles to thiols is described. Under UV irradiation the reaction proceeds rapidly at room temperature, with high yields, without a catalyst, and in both polar protic and aprotic solvents, including water. This UV‐induced tetrazole‐thiol reaction was successfully applied for the synthesis of small molecules, protein modification, and rapid and facile polymer–polymer conjugation. The reaction has also been demonstrated for the formation of micropatterns by site‐selective surface functionalization. Superhydrophobic–hydrophilic micropatterns were successfully created by sequential modifications of a tetrazole‐modified porous polymer surface with hydrophobic and hydrophilic thiols. A biotin‐functionalized surface could be fabricated in aqueous solutions under long‐wavelength UV irradiation.     

Competitive Excimer Formation and Energy Transfer in Zr‐Based Heterolinker Metal–Organic Frameworks

The spectroscopy and dynamics of a series of Zr‐based MOFs in dichloromethane suspension are reported. These Zr‐NADC MOFs were constructed by using different mixtures of 2,6‐naphthalenedicarboxylate (NDC) and 4‐amino‐2,6‐naphthalenedicarboxylate (NADC) as organic linkers. The fraction of NADC relative to NDC in these heterolinker MOFs ranges from 2 to 35 %. The results indicate two competitive photoprocesses: NDC excimer formation and an energy transfer (ET) from excited NDC linkers to NADC linkers. Increasing the fraction of NADC linkers in the Zr‐NADC nanostructure decreases the mean time constant of NDC excimer formation, while the NADC emission intensity experiences a drop at the highest fraction of this linker in the MOF. The first observation is explained by an increase in the energy‐transfer probability between the two linkers, and the second by emission quenching in the NADC linkers due to ultrafast charge transfer assisted by the amino group. Femtosecond time‐resolved emission studies showed that the ET process (recorded as decaying and rising components) from excited NDC to NADC takes place in 1.2 ps. Direct excitation of the NADC linkers (at 410 nm) shows a decaying, but not rising, component of 250–480 fs, which could reflect the formation of a nonemissive charge‐separation state. The results show that by using MOFs having heterolinkers it is possible to trigger and tune excimer formation and ET processes.     

Acid–Base‐Responsive Intense Charge‐Transfer Emission in Donor–Acceptor‐Conjugated Fluorophores

Herein we report on the synthesis and acid‐responsive emission properties of donor–acceptor (D–A) molecules that contain a thienothiophene unit. 2‐Arylthieno[3,2‐b]thiophenes were conjugated with an N‐methylbenzimidazole unit to form acid‐responsive D–A‐type fluorophores. The D–A‐conjugated fluorophores showed intense intramolecular charge‐transfer (ICT) emission in response to acid. The effect of the substitution on their photophysical properties as well as their solvent‐dependence indicated non‐twisting ICT emission in protonated D–A molecules. The quinoidal character of 2‐arylthienothiophene as a donor part is discussed, as it is assumed that it contributes to suppression of the molecular twisting in the excited state, therefore decreasing the nonradiative rate constant, thereby resulting in the intense ICT emission. Acid–base‐sensitive triple‐color emission was also achieved by the introduction of a base‐responsive phenol group in the donor part.     

PEG‐Induced Synthesis of Coordination‐Polymer Isomers with Tunable Architectures and Iodine Capture

Controllable synthesis of coordination polymer (CP) isomers and revealing their structure–property relationships remain enormous challenges. Three new supramolecular isomers have been synthesized by tuning the poly(ethylene glycol) (PEG) content in the feed. These supramolecular isomers have the same framework formula of [Cu₂I₂(tppe)] and different architectures from the classical 2D stacking framework to a 3D entangled system with the coexistence of interpenetration and polycatenation, and a 3D topological framework. Interestingly, these CPs could be utilized for capturing iodine molecules. According to multiple complementary experiments and crystallographic analyses, iodine capture is mainly based on halogen‐bond interactions in the inorganic {Cu₂I₂} building blocks of the framework. The present study describes a structure–property relationship in supramolecular isomerism with distinct topological structures.     

Phthalocyanine‐Sensitized Graphene–CdS Nanocomposites: An Enhanced Photoelectrochemical Immunosensing Platform

A novel strategy is developed for the fabrication of graphene–CdS (G–CdS) nanocomposites by in situ growth of CdS nanoparticles onto simultaneously reduced graphite oxide, which is noncovalently functionalized by sodium 1‐pyrene sulfonate through strong π–π stacking interactions. Subsequently, cobalt 2,9,16,23‐tetraaminophthalocyanine (CoTAPc) is self‐assembled on the G–CdS nanocomposites through electrostatic interactions to produce phthalocyanine‐sensitized G–CdS nanocomposites. The photoactive superstructure enhances the photocurrent generation capability, and presents an efficient photoelectrochemical immunosensing platform for the ultrasensitive detection of the prostate‐specific antigen (PSA). The quantitative measurement of PSA is based on the decrease in the photocurrent intensity of the phthalocyanine‐sensitized G–CdS nanocomposites, which results from an increase in the steric hindrance due to the formation of the immunocomplex. A linear relationship between the photocurrent decrease and the PSA concentration is obtained in the wide range from 1 pg mL^?1 to 5 μg mL^?1 with a detection limit of 0.63 pg mL^?1. The proposed sensor shows high sensitivity, stability, reproducibility, and can become a promising platform for other biomolecular detection.     

Redox‐Active Metal–Organic Frameworks: Highly Stable Charge‐Separated States through Strut/Guest‐to‐Strut Electron Transfer

Molecular organization of donor and acceptor chromophores in self‐assembled materials is of paramount interest in the field of photovoltaics or mimicry of natural light‐harvesting systems. With this in mind, a redox‐active porous interpenetrated metal–organic framework (MOF), {[Cd(bpdc)(bpNDI)] ? 4.5 H₂O ? DMF}_n ( 1 ) has been constructed from a mixed chromophoric system. The μ‐oxo‐bridged secondary building unit, {Cd₂(μ‐OCO)₂}, guides the parallel alignment of bpNDI (N,N′‐di(4‐pyridyl)‐1,4,5,8‐naphthalenediimide) acceptor linkers, which are tethered with bpdc (bpdcH₂=4,4′‐biphenyldicarboxylic acid) linkers of another entangled net in the framework, resulting in photochromic behaviour through inter‐net electron transfer. Encapsulation of electron‐donating aromatic molecules in the electron‐deficient channels of 1 leads to a perfect donor–acceptor co‐facial organization, resulting in long‐lived charge‐separated states of bpNDI. Furthermore, 1 and guest encapsulated species are characterised through electrochemical studies for understanding of their redox properties.     

亲水梳状环氧聚合物载体柔性固定化脂肪酶

以氯乙酰化聚苯乙烯微球载体为大分子引发剂,以甲基丙烯酸缩水甘油酯和亲水性丙烯酰胺为共聚接枝单体,以氯化亚铜及2,2'-联吡啶为催化体系,采用原子转移自由基聚合法接枝合成了具有柔性链的亲水梳状环氧聚合物载体PS-acyl-P(AM-co-GMA),并将其用于耐有机溶剂YCJ01脂肪酶的共价柔性固定化.结果表明,固定化酶催...     

Amphiphilic Peptide–Polymer Conjugates with Side‐Conjugation

Polymers conjugated to the exterior of a protein mediate its interactions with surroundings, enhance its processability and can be used to direct its macroscopic assemblies. Most studies to date have focused on peptide–polymer conjugates based on hydrophilic polymers. Engineering amphiphilicity into protein motifs by covalently linking hydrophobic polymers has the potential to interface peptides and proteins with synthetic polymers, organic solvents, and lipids to fabricate functional hybrid materials. Here, we synthesized amphiphilic peptide–polymer conjugates in which a hydrophobic polymer is conjugated to the exterior of a heme‐binding four‐helix bundle and systematically investigated the effects of the hydrophobicity of the conjugated polymer on the peptide structure and the integrity of the heme‐binding pocket. In aqueous solution with surfactants present, the side‐conjugated hydrophobic polymers unfold peptides and may induce an α‐helix to β‐sheet conformational transition. These effects decrease as the polymer becomes less hydrophobic and directly correlate with the polymer hydrophobicity. Upon adding organic solvent to solubilize the hydrophobic polymers, however, the deleterious effects of hydrophobic polymers on the peptide structures can be eliminated. Present studies demonstrate that protein structure is sensitive to the local environment. It is feasible to dissolve amphiphilic peptide–polymer conjugates in organic solvents to enhance their solution processability while maintaining the protein structures.

     

UV‐Irradiation Cured Organic‐inorganic Hybrid Nanocomposite Initiated by Ethoxysilane‐modified Multifunctional Polymeric Photoinitiator through Sol‐gel Process

The UV‐cured organic‐inorganic hybrid nanocomposite (nano‐Si‐m‐PI) was prepared through the photopolymerization of acrylic resin initiated by ethoxysilane‐modified multifunctional oligomeric photoinitiator (Si‐m‐PI). The esterification reaction of 2‐hydroxy‐4′‐(2‐hydroxyethoxy)‐2‐methylpropiophenone (Irgacure 2959) with thioglycolic acid, and the following addition reactions with dipentaerythritol hexaacrylate and then 3‐aminopropyltriethoxysilane were carried out for preparing the Si‐m‐PI. The Si‐m‐PI exhibits the similar UV absorption and molar extinction coefficient with Irgacure 2959. The photoinitiating activity study by photo‐DSC analysis showed that the Si‐m‐PI possesses high photopolymerization rate at the peak maximum (R_p^max) and final unsaturation conversion (P^f) in the cured hybrid films. From the scanning electron microscope (SEM) observation, the SiO₂ nanoparticles dispersed uniformly in the formed nano‐Si‐m‐PI, whereas the aggregation of nanoparticals occurred in nano‐Irg, which was prepared through the photopolymerization of acrylic resin initiated by Irgacure 2959. Moreover, compared with the UV‐cured pure polymer and nano‐Irg, the nano‐Si‐m‐PI showed remarkably enhanced thermal stability and mechanical properties.     

Layer‐by‐Layer Assembly of Metal–Organic Frameworks in Macroporous Polymer Monolith and Their Use for Enzyme Immobilization

New monolithic materials comprising zeolitic imidazolate framework (ZIF‐8) located on the pore surface of poly(glycidyl methacrylate‐co‐ethylene dimethacrylate) monolith previously functionalized with N‐(3‐aminopropyl)‐imidazole have been prepared via a layer‐by‐layer self‐assembly strategy. These new ZIF‐8@monolith hybrids are used as solid‐phase carriers for enzyme immobilization. Their performance is demonstrated with immobilization of a model proteolytic enzyme trypsin. The best of the conjugates enable very efficient digestion of proteins that can be achieved in mere 43 s.

     

Chelation‐Induced Polymer Structural Hierarchy/Complexity in Water

Understanding nanoscale structural hierarchy/complexity of hydrophilic flexible polymers is imperative because it can be viewed as an analogue to protein‐alike superstructures. However, current understanding is still in infancy. Herein the first demonstration of nanoscale structural hierarchy/complexity via copper chelation–induced self‐assembly (CCISA) is presented. Hierarchically‐ordered colloidal networks and disks can be achieved by deliberate control of spacer length and solution pH. Dynamic light scattering, transmission electron microscopy, and atomic force microscopy demonstrate that CCISA underwent supramolecular‐to‐supracolloidal stepwise‐growth mechanism, and underline amazing prospects to the hierarchically‐ordered superstructures of hydrophilic flexible polymers in water.

     

Metal–Organic‐Framework‐Templated Polyelectrolyte Nanocapsules for the Encapsulation and Delivery of Small‐Molecule–Polymer Conjugates

Herein, we report a strategy for exploiting nanoscale metal–organic frameworks (nano‐MOFs) as templates for the layer‐by‐layer (LbL) assembly of polyelectrolytes. Because small‐molecule drugs or imaging agents cannot be efficiently encapsulated by polyelectrolyte nanocapsules, we investigated two promising and biocompatible polymers (comb‐shaped polyethylene glycol (PEG) and hyperbranched polyglycerol‐based PEG) for the conjugation of model drugs and imaging agents, which were then encapsulated inside the nano‐MOF‐templated nanocapsules. Furthermore, we also systemically explored the release kinetics of the encapsulated conjugates, and examined how the encapsulation and/or release processes could be controlled by varying the composition and architecture of the polymers. We envision that our nano‐MOFs‐templated nanocapsules, through combining with small‐molecule–polymer conjugates, will represent a new type of delivery system that could open up new opportunities for biomedical applications.     

Synthesis and characterization of fluorine‐containing polyacrylate latex with core–shell structure by UV‐initiated seeded emulsion polymerization

A core–shell fluorine‐containing polyacrylate emulsion was successfully prepared by UV‐initiated seeded emulsion polymerization in two stages in the presence of two photoinitiators. The water‐soluble photoinitiator for the core polymerization and the oil‐soluble photoinitiator was used for the shell polymerization. Both of the two stage polymerizations could be completed within 15 min and displayed a conversion above 94%. The emulsion and the films were characterized by Fourier transformed infrared spectrometry, transmission electron microscopy, dynamic light scattering, X‐ray photoelectron spectroscopy (XPS), contact angle (CA), and thermogravimetry analysis, respectively. The analysis results indicated that the fluorine‐containing latex particles had very small particle size (40 nm) with a core–shell structure and a narrow particle size distribution. XPS analysis revealed that a gradient concentration of fluorine excited in fluorine‐containing emulsion film from the film–air interface to the film–glass interface. In addition, the film formed from the fluorine‐containing emulsion exhibited not only higher thermal stability but also better hydrophobicity than that of the fluorine‐free emulsion. Copyright © 2010 John Wiley & Sons, Ltd.     

A UV‐Cleavable Bottlebrush Polymer with o‐Nitrobenzyl‐Linked Side Chains

An ultraviolet (UV)‐cleavable bottlebrush polymer is synthesized using the “grafting‐onto” strategy by combining living radical polymerization and copper‐catalyzed azide‐alkyne cycloaddition (CuAAC). In this approach, reversible addition‐fragmentation chain transfer polymerization is used to prepare a poly(methylacrylate) backbone with azide side groups, while atom transfer radical polymerization is employed to prepare polystyrene (PS) side chains end‐functionalized with o‐nitrobenzyl (UV‐cleavable) propargyl groups. CuAAC is then used to graft PS side chains onto the polymer backbone, producing the corresponding bottlebrush polymers with UV‐cleavable PS side chains. The formation of the bottlebrush polymer is characterized by ¹H nuclear magnetic resonance spectroscopy, gel permeation chromatography (GPC), and Fourier transform infrared spectroscopy. The cleavage behavior of the bottlebrush polymer is monitored in tetrahydrofuran solution under UV irradiation by GPC and viscosity measurements.

     

Coordination Polymer Nanobamboos of {FexIn1−x}‐MIL‐88B: Induced Formation of a Virtual In‐MIL‐88B

A precise fabrication of nanobamboo structures made from hybrid coordination polymers of the type {Fe_xIn_1?x}‐MIL‐88B is demonstrated. The compositions of the hybrid coordination polymer nanobamboos of {Fe_xIn_1?x}‐MIL‐88B (x=0.06, 0.19, or 0.75) are regulated by altering the amount of metal ions used in the reactions. Interestingly, the formation of a virtual In‐MIL‐88B (precise structure, {Fe_0.06In_0.94}‐MIL‐88B), which cannot be created in a typical reaction, is induced by the assistance of a Fe‐MIL‐88B structure. The a and c cell parameters of {Fe_0.06In_0.94}‐MIL‐88B are calculated at 10.95 and 19.86 Å, respectively. These values of {Fe_0.06In_0.94}‐MIL‐88B are larger than those of pure Fe‐MIL‐88B owing to the large ionic size of In³⁺ within the framework.     

Flexible and Hierarchical Metal–Organic Framework Composites for High‐Performance Catalysis

The development of porous composite materials is of great significance for their potentially improved performance over those of individual components and extensive applications in separation, energy storage, and heterogeneous catalysis. Now mesoporous metal–organic frameworks (MOFs) with macroporous melamine foam (MF) have been integrated using a one‐pot process, generating a series of MOF/MF composite materials with preserved crystallinity, hierarchical porosity, and increased stability over that of melamine foam. The MOF nanocrystals were threaded by the melamine foam networks, resembling a ball‐and‐stick model overall. The resulting MOF/MF composite materials were employed as an effective heterogeneous catalyst for the epoxidation of cholesteryl esters. Combining the advantages of interpenetrative mesoporous and macroporous structures, the MOF/melamine foam composite has higher dispersibility and more accessibility of catalytic sites, exhibiting excellent catalytic performance.