Valorization of Fermented Shrimp Waste with Supercritical CO2 Conditions: Extraction of Astaxanthin and Effect of Simulated Gastrointestinal Digestion on Its Antioxidant Capacity

Lactic acid fermentation increases the bioactive properties of shrimp waste. Astaxanthin is the principal carotenoid present in shrimp waste, which can be found esterified in the liquid fraction (liquor) after its lactic acid fermentation. Supercritical CO₂ technology has been proposed as a green alternative to obtain astaxanthin from fermented shrimp waste. This study aimed to optimize astaxanthin extraction by supercritical CO₂ technology from fermented liquor of shrimp waste and study bioaccessibility using simulated gastrointestinal digestion (GD) of the optimized extract. A Box–Behnken design with three variables (pressure, temperature, and flow rate) was used to optimize the supercritical CO₂ extraction. The optimized CO₂ extract was obtained at 300 bar, 60 °C, and 6 mL/min, and the estimated characteristics showed a predictive extraction yield of 11.17%, antioxidant capacity of 1.965 mmol of Trolox equivalent (TE)/g, and astaxanthin concentration of 0.6353 µg/g. The experiment with optimal conditions performed to validate the predicted values showed an extraction yield of 12.62%, an antioxidant capacity of 1.784 mmol TE/g, and an astaxanthin concentration of 0.52 µg/g. The astaxanthin concentration decreased, and the antioxidant capacity of the optimized extract increased during gastrointestinal digestion. In conclusion, our optimized supercritical CO₂ process is suitable for obtaining astaxanthin from shrimp by-products after lactic acid fermentation.     

Optimized Green Extraction of Polyphenols from Cassia javanica L. Petals for Their Application in Sunflower Oil: Anticancer and Antioxidant Properties

The total phenolic content (TPC) from Cassia javanica L. petals were extracted using ethanolic solvent extraction at concentrations ranging from 0 to 90% and an SCF-CO₂ co-solvent at various pressures. Ultrasound-assisted extraction parameters were optimized using response surface methodology (RSM). Antioxidant and anticancer properties of total phenols were assessed. An SCF-CO₂ co-solvent extract was nano-encapsulated and applied to sunflower oil without the addition of an antioxidant. The results indicated that the best treatment for retaining TPC and total flavonoids content (TFC) was SCF-CO₂ co-solvent followed by the ultrasound and ethanolic extraction procedures. Additionally, the best antioxidant activity by β-carotene/linoleic acid and DPPH free radical-scavenging test systems was observed by SCF-CO₂ co-solvent then ultrasound and ethanolic extraction methods. SCF-CO₂ co-solvent recorded the highest inhibition % for PC3 (76.20%) and MCF7 (98.70%) and the lowest IC₅₀ value for PC3 (145 µ/mL) and MCF7 (96 µ/mL). It was discovered that fortifying sunflower oil with SCF-CO₂ co-solvent nanoparticles had a beneficial effect on free fatty acids and peroxide levels. The SCF-CO₂ method was finally found to be superior and could be used in large-scale processing.     

Comparison of supercritical fluid and ultrasound-assisted extraction of carotenoids and chlorophyll a from Dunaliella salina

In the work described here the extraction processes of carotenoids and chlorophylls were analysed using two extraction techniques, namely ultrasound-assisted extraction and supercritical fluid extraction, and the results are compared. The solvents used for the ultrasound-assisted extraction were N,N′-dimethylformamide and methanol and for the supercritical fluid extraction, carbon dioxide. The raw material studied was Dunaliella salina, a microalgae characterized by the high levels of carotenoids present in its cellular structure. The results indicate that the supercritical fluid extraction process is comparable to the ultrasound-assisted extraction when methanol is used as solvent. In addition, the supercritical extraction process is more selective for the recovery of carotenoids than the conventional technique since it leads to higher values for the ratio carotenoids/chlorophylls. Finally, the effects of pressure and temperature on the extraction yields of the supercritical fluid extraction process were studied.     

Ultrasound-Assisted Extraction of Carotenoids from Carrot Pomace and Their Optimization through Response Surface Methodology

Ultrasound-assisted extraction (UAE) was used to extract carotenoids from the carrot pomace. To investigate the effect of independent variables on the UAE, the response surface methodology (RSM) with central-composite design (CCD) was employed. The study was conducted with three independent variables including extraction time (min), temperature (°C), and ethanol concentration (%). The results showed that the optimal conditions for UAE were achieved with an extraction time of 17 min, temperature of 32 °C, and ethanol concentration of 51% of total carotenoids (31.82 ± 0.55); extraction time of 16 min, temperature of 29 °C, and ethanol concentration of 59% for a combination of β-carotene (14.89 ± 0.40), lutein (5.77 ± 0.19), and lycopene (2.65 ± 0.12). The non-significant (p > 0.05) correlation under optimal extraction conditions between predicted and experimental values suggested that UAE is the more productive process than conventional techniques for the extraction of carotenoids from the carrot pomace.     

Pressurized fluid extraction of carotenoids from Haematococcus pluvialis and Dunaliella salina and kavalactones from Piper methysticum

Pressurized fluid extraction (PFE) was examined as an alternative technology for the extraction of carotenoids in the green algae Haematococcus pluvialis and Dunaliella salina and kavalactones in Piper methysticum. The extraction process was optimized by varying the key extraction factors of solvent, sample-solvent ratio, temperature, and time. The selectivity and efficiency of extraction parameters were determined with high performance liquid chromatography (LC) and LC-mass spectrometry (LC-MS). Results showed that PFE utilization of conventional solvents under controlled temperature and pressure in an oxygen and light-free environment could result in the use of less solvent in a shorter period of time. PFE showed higher or equal extraction efficiencies as compared with traditional solvent extractions while maintaining the integrity of chemical components. PFE showed high potential for extraction of natural products and nutraceuticals, particularly labile and light sensitive chemicals.     

Supercritical fluid extraction of lipids from linseed with on-line evaporative light scattering detection

Supercritical fluid extraction (SFE) is a green alternative method of extraction for neutral lipids in seeds compared to conventional methods utilizing organic solvents. In this work, a novel method where SFE is hyphenated with an evaporative light scattering detector is presented. The method was subsequently applied to determine lipid content in crushed linseed. The new method enables rapid quantification of extracted lipids as well as be ability to continuously monitor the extraction rate in real-time, thus being able to determine the time point of completed extraction.     

HPLC micro-fractionation coupled to a cell-based assay for automated on-line primary screening of calcium antagonistic components in plant extracts

High performance liquid chromatography (HPLC) micro-fractionation was successfully coupled to an automated ⁴⁵Ca²⁺ uptake assay using GH₄C₁ cells for the separation of natural product extracts and for the primary detection of their calcium antagonistic components. The reliability of the procedure was first established with a reference solution consisting of pure compounds with a known effect on the Ca²⁺ uptake. No loss of activity was observed to occur after HPLC micro-fractionation. Extracts of Peucedanum palustre and Pinus sylvestris, showing high and no inhibition of Ca²⁺ uptake as total extracts, respectively, were analysed and the inhibitory activity of the P. palustre extract could be traced to two components, identified as columbianadin and isoimperatorin. As expected, no significant inhibition was observed with the micro-fractionated P. sylvestris samples. In summary, the procedure was found to be applicable for primary detection of calcium antagonistic components in complex matrices and to significantly reduce the time previously needed for bioactivity-guided isolation.     

叶酸修饰星型端氨基PEG-PLGA纳米胶束的制备及肿瘤细胞靶向作用

合成了星型多臂端氨基聚乙二醇(PEG)/聚乳酸-羟基乙酸(PLGA)两亲性嵌段共聚物(4s-PLGA-PEG-NH₂), 并通过核磁共振和凝胶渗滤色谱法对其结构进行表征; 采用溶剂挥发法制备阿霉素载药纳米胶束, 利用EDC缩合法与叶酸偶联, 得到叶酸修饰的星型端氨基PEG-PLGA纳米胶束; 采用动态光散射、 紫外光谱及透射电镜等手段对纳米胶束进行了表征; 对载药纳米胶束在HeLa细胞中的摄取及细胞毒性进行了初步评价. 结果表明, 经叶酸修饰的星型多臂端氨基PEG-PLGA载药纳米胶束可有效提高HeLa细胞的摄取率以及对HeLa细胞的杀伤率, 表明其可作为一类新型的靶向抗肿瘤药物递送载体.     

Determination of ferrous and ferric iron in aqueous biological solutions

A solvent extraction method was employed to determine ferrous and ferric iron in aqueous samples. Fe³⁺ is selectively extracted into the organic phase (n-heptane) using HDEHP (bis(2-ethylhexyl) hydrogen phosphate) and is then stripped using a strong acid. After separation, both oxidation states and the total iron content were determined directly by ICP-MS analysis. This extraction method was refined to allow determination of both iron oxidation states in the presence of strong complexing ligands, such as citrate, NTA and EDTA. The accuracy of the method was verified by crosschecking using a refinement of the ferrozine assay. Presented results demonstrate the ability of the extraction method to work in a microbiological system in the presence of strong chelating agents following the bioreduction of Fe³⁺ by the Shewanella alga BrY. Based on the results we report, a robust approach was defined to separately analyze Fe³⁺ and Fe²⁺ under a wide range of potential scenarios in subsurface environments where radionuclide/metal contamination may coexist with strongly complexing organic contaminants.     

Characterization of Volatile Flavor Compounds in Supercritical Fluid Separated and Identified in Gurum (Citrulluslanatus Var. colocynthoide) Seed Oil Using HSME and GC–MS

In this study, the volatile compound profiles of gurum seed oil were determined using two methods: supercritical CO₂ extraction (SFE) and the screw press process (SPP). For volatile compounds extraction and identification, headspace solid-phase micro-extraction (HS-SPME) and GC–MS were used, respectively. A total number of 56 volatile compounds were revealed and identified in oil extracted by SFE, while only 40 compounds were detected in extracted oil by SPP. Acids, aldehydes, esters, ketones, furans, and other components were present in the highest ratio in oil extracted by SFE. In contrast, alcohols and alkenes were found in the highest proportion in oil extracted by SPP. In this study, it was observed that SFE showed an increase in the amounts of volatile compounds and favorably impacted the aroma of gurum seed oil. The results reveal that different extraction methods significantly impact the volatile components of gurum seed oil, and this study can help evaluate the quality of the oil extracted from gurum seeds.     

Identification and Optimization of a Novel Taxanes Extraction Process from Taxus cuspidata Needles by High-Intensity Pulsed Electric Field

Taxanes are a series of natural compounds with great application potential in antitumor therapy, whereas the lack of efficient taxanes extraction methods significantly hinders the development of taxanes. The high-intensity pulsed electric field (PEF) is a novel technology used to extract bioactive ingredients from food and other natural products. However, the prospect of using PEF for taxanes extraction remains to be elucidated. Herein, we extracted taxanes from Taxus cuspidata via PEF and explored the effects of seven extraction conditions on the yields of target compounds. The Placket–Burman design (PBD) assay revealed that electric field strength, pulse number, and particle size are key factors for taxanes extraction. The response surface methodology (RSM) and back-propagation neural network conjugated with genetic algorithm (GA-BP) were further used to model and predict the optimal extraction conditions, and GA-BP exerted higher reliability, leading to a maximum extraction yield of 672.13 μg/g under electric field strength of 16 kV/cm, pulse number of 8, particle size of 160 meshes, solid–liquid ratio of 1:60, a single extraction, centrifugal speed of 8000 r/min, and flow rate of 7 mL/min, which was 1.07–1.84 folds that of control, solid–liquid extraction (SL), and ultrasonic extraction (US) groups. Additionally, the scanning electron microscopy (SEM) results indicated that the sample particles extracted by PEF method exhibited a coarser surface morphology. Thus, we present for the first time that PEF is feasible for the extraction of taxanes from Taxus cuspidata and highlight the application value of the PBD, RSM, and GA-BP models in parameters optimization during extraction process.     

Valuable Natural Antioxidant Products Recovered from Tomatoes by Green Extraction

Lycopene, β-carotene and ω-fatty acids are major compounds in tomatoes with known antioxidant activity, capable of preventing health disorders. The identification of potential natural sources of antioxidants, extraction efficiencies and antioxidant activity assessments are essential to promote such products to be used in the food, pharmaceutical or cosmetic industries. This work presents four added-value products recovered from tomatoes: pigmented solid oleoresin, pigmented oil and two raw extracts from supercritical and Soxhlet extraction. Different parameters including the matrices of tomatoes, extraction methods, green solvents and operating parameters were varied to obtain extracts with different qualities. Extract analysis was performed using UV–VIS, FT–IR, GC–MS, Folin–Ciocalteu and DPPH methods. The highest-quality extract was the solid oleoresin obtained from pomace using supercritical CO₂ extraction at 450 bar, 70 °C and 11 kg/h: 1016.94 ± 23.95 mg lycopene/100 g extract, 154.87 ± 16.12 mg β-carotene/100 g extract, 35.25 ± 0.14 mg GAE/g extract and 67.02 ± 5.11% inhibition DPPH. The economic feasibility of the three extraction processes (1:10:100 kg dried pomace/batch as scalability criterion) was evaluated. The most profitable was the supercritical extraction process at the highest capacity, which produces pigmented solid oleoresin and oil with high content of lycopene valorized with a high market price, using natural food waste (pomace).     

Development and validation of a nonaqueous capillary electrophoretic method for the enantiomeric purity determination of a synthetic intermediate of new 3,4-dihydro-2,2-dimethyl-2H-1-benzopyrans using a single-isomer anionic cyclodextrin derivative and an ionic liquid

The enantiomeric purity determination of a synthetic intermediate of new 3,4-dihydro-2,2-dimethyl-2H-1-benzopyrans, i.e. 4-amino-2,2-dimethyl-6-ethoxycarbonylamino-3,4-dihydro-2H-1-benzopyran, was successfully carried out using an anionic cyclodextrin (CD) derivative combined with a chiral ionic liquid (IL). In order to obtain high resolution and efficiency values, the addition of a chiral IL, i.e. ethylcholine bis(trifluoromethylsulfonyl)imide (EtChol NTf₂), to the background electrolyte containing heptakis(2,3-di-O-methyl-6-O-sulfo)-β-CD (HDMS-β-CD) was found to be essential. A simultaneous increase in separation selectivity and enantioresolution seems to indicate a synergistic effect of HDMS-β-CD and EtChol NTf₂. The best enantioseparation of the key intermediate was achieved using a methanolic solution of 0.75 M formic acid, 10 mM ammonium formate, 1.5 mM HDMS-β-CD and 5 mM EtChol NTf₂. Levamisole was selected as internal standard. The optimized conditions allowed the determination of 0.1% of each enantiomer in the presence of its stereoisomer using the method of standard additions. The NACE method was then fully validated with respect to selectivity, response function, trueness, precision, accuracy, linearity and limits of detection and quantification.     

Retention profile, kinetics and sequential determination of selenium(IV) and (VI) employing 4,4'-dichlorodithizone immobilized-polyurethane foams

Polyurethane foams (PUFs) loaded with the chromogenic reagent 4,4′-dichlorodithizone (Cl₂H₂D_Z) have been investigated for the quantitative retention, chemical speciation and sequential determination of traces of inorganic selenium(IV) and (VI) from aqueous media containing bromide ions. The retention profile of selenium(IV) onto the reagent loaded foam followed a dual-mode sorption mechanism involving both absorption related to “solvent extraction” and an added component for surface adsorption. The kinetics and thermodynamic characteristics of selenium(IV) uptake onto PUFs have been studied. The kinetics of selenium(IV) sorption onto PUFs was found fast, reached equilibrium in few minutes and followed a first-order rate constant in presence of bromide ions in the extraction media. The thermodynamic parameters, ΔH, ΔS and ΔG, indicated the exothermic and spontaneous nature of the sorption process. The sorption and the recovery percentages of inorganic selenium(IV) from fresh water by the proposed loaded foam columns were achieved quantitatively. The height equivalent to theoretical plate (HETP), the number of layers (N), breakthrough capacity and the critical capacity for selenium(IV) uptake onto Cl₂H₂D_Z loaded foams columns were found to be 1.3, 103, 8.6 and 7.2 mg/g, respectively. The method was successfully applied for the chemical speciation and sequential determination of inorganic selenium(IV) and/or (VI) species spiked to fresh and industrial wastewaters.     

Enhancement of β-Glucan Biological Activity Using a Modified Acid-Base Extraction Method from Saccharomyces cerevisiae

Beta glucan (β-glucan) has promising bioactive properties. Consequently, the use of β-glucan as a food additive is favored with the dual-purpose potential of increasing the fiber content of food products and enhancing their health properties. Our aim was to evaluate the biological activity of β-glucan (antimicrobial, antitoxic, immunostimulatory, and anticancer) extracted from Saccharomyces cerevisiae using a modified acid-base extraction method. The results demonstrated that a modified acid-base extraction method gives a higher biological efficacy of β-glucan than in the water extraction method. Using 0.5 mg dry weight of acid-base extracted β-glucan (AB extracted) not only succeeded in removing 100% of aflatoxins, but also had a promising antimicrobial activity against multidrug-resistant bacteria, fungi, and yeast, with minimum inhibitory concentrations (MIC) of 0.39 and 0.19 mg/mL in the case of resistant Staphylococcus aureus (MRSA) and Pseudomonas aeruginosa, respectively. In addition, AB extract exhibited a positive immunomodulatory effect, mediated through the high induction of TNFα, IL-6, IFN-γ, and IL-2. Moreover, AB extract showed a greater anticancer effect against A549, MDA-MB-232, and HepG-2 cells compared to WI-38 cells, at high concentrations. By studying the cell death mechanism using flow-cytometry, AB extract was shown to induce apoptotic cell death at higher concentrations, as in the case of MDA-MB-231 and HePG-2 cells. In conclusion, the use of a modified AB for β-glucan from Saccharomyces cerevisiae exerted a promising antimicrobial, immunomodulatory efficacy, and anti-cancer potential. Future research should focus on evaluating β-glucan in various biological systems and elucidating the underlying mechanism of action.     

Chitooligosaccharides: Synthesis,characterization and applications

Chitosans with high degree of polymerization and molecular weight exhibit poor aqueous solubility which is an impediment in their applicability. The low molecular weight chitosans (LMWCs) and chitooligosaccharides (COSs) can be used to avoid this hurdle. The development of an efficient process for reducing the molecular weight of chitosan, without altering its chemical structure, is of great interest to produce tailormade chitosans of varying Degree of Acetylation (DAs) and Degree of Polymerization (DPs). The production of well-defined COS-mixtures, or even pure COS, is of great interest since these oligosaccharides are thought to have several interesting bioactivities and applications. For this proper delineation of their characteristics is needed. Hence it is our attempt to provide an overview of difffernt methods and techniques of their production and characterization. Several methods viz. depolymerization under the action of reagents, enzymes, high energy impact and combinations thereof have been employed to get COS by depolymerization of high molecular weight chitosans. Acid hydrolysis (hydrochloric, nitrous, phosphoric acid, hydrogen fluoride) and oxidative reductive depolymerization (mediated by peroxide, ozone, and persulfate) are important routes for synthesis of COSs. These oligomers can be produced from chitin or chitosan as a starting material by enzymatic conversions. For this, numbers of enzymes have been used. Depolymerization under high energy impact and recombinant approaches are also being tried for production of COSs. LMWC and COS, like parent chitosan, can be used for drug delivery and gene delivery. The efficient and productive processes are needed for separation of COSs into its components or mixture of defined characters. The characterization of COS can be carried out by chromatographic and spectroscopic techniques. Importantly COSs display an array of biological activities as antimicrobial, anticancer/antimetastatic, wound healing acceleration, immunostimulation, apoptosis induction or inhibiton, antioxidant, enzyme inhibiton, antihyperlipidemic, antidiabetic, chemoprevention, and many more. A few of the biological actions are reported only sporadically where as some are persistently taken up by the scientific fraternity to substantiate the claims and propose possible mechanisms of action. However there remains the disagreement of results on COS activities. The disagreements can arise due to poor and variable reporting of the properties of COS such as used in the studies as molecular weight, degree of acetylation, molecular weight distribution, and the pattern of N-acetylation etc. With production of COS of well defined characters it might be possible to understand the modes of actions of COS in better ways.     

Cobalt oxide nanoparticles as a novel high-efficiency fiber coating for solid phase microextraction of benzene,toluene, ethylbenzene and xylene from aqueous solutions

In this work cobalt oxide nanoparticles were introduced for preparation of a novel solid phase microextraction (SPME) fiber coating. Chemical bath deposition (CBD) technique was used in order for synthesis and immobilization of the Co₃O₄ nanomaterials on a Pt wire for fabrication of SPME fiber. The prepared cobalt oxide coating was characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. The fiber was evaluated for the extraction of benzene, toluene, ethylbenzene and xylene (BTEX) in combination with GC–MS. A simplex optimization method was used to optimize the factors affecting the extraction efficiency. Under optimized conditions, the proposed fiber showed extraction efficiencies comparable to those of a commercial polydimethylsiloxane (PDMS) fiber toward the BTEX compounds. The repeatability of the fiber and its reproducibility, expressed as relative standard deviation (RSD), were lower than about 11%. No significant change was observed in the extraction efficiency of the new SPME fiber after over 50 extractions. The fiber was successfully applied to the determination of BTEX compounds in real samples. The proposed nanostructure cobalt oxide fiber is a promising alternative to the commercial fibers as it is robust, inexpensive and easily prepared.     

DSC study of the phase transitions in [Ni(D2O)6](ClO4)2 and [Ni(H2O)6](ClO4)2

DSC measurements were carried out for [Ni(H₂O)₆](ClO₄)₂ (sampleH) and [Ni(D₂O)₆](ClO₄)₂ (sampleD) in the temperature range 300–380 K. For both compounds two anomalies on the DSC curves were detected. The results for sampleH are compared to those previously obtained using adiabatic calorimetry method. For both compounds studied in this work the high-temperature transition appears at the same temperature while the low-temperature one is shifted towards higher temperatures in sampleD. Disorder connected with H₂O or D₂O groups is suggested in the intermediate phase between the low- and high-temperature transitions.     

Chemical Composition,Antioxidant and Cytoprotective Potentials of Carica papaya Leaf Extracts: A Comparison of Supercritical Fluid and Conventional Extraction Methods

The leaves of Carica papaya (CP) are rich in natural antioxidants. Carica papaya has traditionally been used to treat various ailments, including skin diseases. This study aims to decipher the antioxidant effects and phytochemical content of different CP leaf extracts (CPEs) obtained using supercritical carbon dioxide (scCO₂) and conventional extraction methods. The antioxidant activities of CPEs were evaluated by cell-free (1,1-diphenyl-2-picryl-hydrazyl (DPPH) and ferric-reduced antioxidative power (FRAP)) and cell-based (H₂O₂) assay. Both C. papaya leaf scCO₂ extract with 5% ethanol (CPSCE) and C. papaya leaf scCO₂ extract (CPSC) exhibited stronger DPPH radical scavenging activity than conventional extracts. In the FRAP assay, two hydrophilic extracts (C. papaya leaf ethanol extract (CPEE) and C. papaya freeze-dried leaf juice (CPFD)) showed relatively stronger reducing power compared to lipophilic extracts. Cell-based assays showed that CPFD significantly protected skin fibroblasts from H₂O₂-induced oxidative stress in both pre-and post-treatment. CPEE protected skin fibroblasts from oxidative stress in a dose-dependent manner while CPSCE significantly triggered the fibroblast recovery after treatment with H₂O₂. GC-MS analysis indicated that CPSCE had the highest α-tocopherol and squalene contents. By contrast, both CP hydrophilic extracts (CPEE and CPFD) had a higher total phenolic content (TPC) and rutin content than the lipophilic extracts. Overall, CPEs extracted using green and conventional extraction methods showed antioxidative potential in both cell-based and cell-free assays due to their lipophilic and hydrophilic antioxidants, respectively.     

Optimization of clean extraction methods to isolate carotenoids from the microalga Neochloris oleoabundans and subsequent chemical characterization using liquid chromatography tandem mass spectrometry

A novel experimental design was used to optimize the extraction of carotenoids from Neochloris oleoabundans using pressurized liquid extraction with food-grade solvents such as ethanol and limonene. Experimental factors, including the extraction temperature and the solvent composition, were optimized using a three-level factorial design. The response variables extraction yield and total amount of carotenoids were assessed. The statistical analysis of the results provided mathematical models to predict the behavior of the responses as a function of the factors involved in the process. The optimum conditions predicted by the model developed in this study were 112 °C as the extraction temperature and 100 % ethanol as the extraction solvent. Chemical characterization of the extracts obtained was performed by means of high-performance liquid chromatography–tandem mass spectrometry. The results obtained demonstrated that, under certain growth conditions (photoautotrophically cultured in a medium supplemented with 0.3 g?L^?1 KNO₃), N. oleoabundans accumulated significant total amounts of the carotenoids (from 57.4 to 120.2 mg carotenoids per gram of extract depending on the extraction conditions), mainly lutein, cantaxanthin, zeaxanthin, and astaxanthin monoesters and diesters.