丝素蛋白3D打印在生物医学领域中的应用

增材制造,也称为三维(3D)打印,正推动制造、工程、医学等领域的全面创新升级。3D打印技术由于能够个性化定制生物的复杂3D微结构,构建仿生的功能化活组织或人工器官,近十年来在生物医学领域中取得了长足的发展。丝素蛋白(SF)是一种来源丰富、生物可降解、力学性能优良、细胞相容性极佳的天然有机高分子,为3D打印墨水的设计提供了一种有前景的选择。然而,作为结构蛋白,单一组分的SF具有的生理功能有限,且其经过打印后的稳定性较差,限制了SF在3D打印以及生物医药领域中的进一步发展。为此,研究人员通过化学改性技术和先进3D打印技术相结合,使得改性后的SF能够更适用于3D打印,并发展成为一种具有应用价值的生物材料。本文综述了SF的结构特征、SF的化学修饰策略、打印墨水的制备策略以及3D打印SF材料在生物医学领域的最新应用进展,并展望了3D打印SF生物材料的未来发展趋势,为其在更广阔领域的应用提供一定的借鉴。     

光交联自支撑丝素蛋白水凝胶的三维快速成型

将丝素蛋白(SF)光诱导自交联原理与挤出式三维(3D)打印相结合, 开发了光交联自支撑SF水凝胶的原位成型加工技术. 采用旋转流变仪、 光流变测试系统和改装的挤出式3D打印设备等对SF溶液的流变性能、 光交联性能和成型加工性能等进行研究. 结果表明, SF溶液主要表现为黏性特征, 结构强度和稳定性均较差. 利用SF的光诱导自交联特性, 以三联吡啶氯化钌[Ru(Ⅱ)]和过硫酸钾(KPS)为蓝光引发体系, 可实现SF水凝胶的快速光交联成型. SF光交联行为符合指数函数增长模型, 因“滤镜效应”, 当Ru(Ⅱ)的浓度为0.05 mmol/L时, SF具有最佳的光交联性能. 通过调节气压、 针头孔径、 移动速度及固化速率等参数, 采用3D打印设备可实现从单层几何结构到多层三维网络构型SF凝胶材料的高效、 精准构建, 为SF的生物3D打印提供了新思路.     

Preparation and Characterization of Natural Silk Fibroin Hydrogel for Protein Drug Delivery

In recent years, hydrogels have been widely used as drug carriers, especially in the area of protein delivery. The natural silk fibroin produced from cocoons of the Bombyx mori silkworm possesses excellent biocompatibility, significant bioactivity, and biodegradability. Therefore, silk fibroin-based hydrogels are arousing widespread interest in biomedical research. In this study, a process for extracting natural silk fibroin from raw silk textile yarns was established, and three aqueous solutions of silk fibroin with different molecular weight distributions were successfully prepared by controlling the degumming time. Silk fibroin was dispersed in the aqueous solution as “spherical” aggregate particles, and the smaller particles continuously accumulated into large particles. Finally, a silk fibroin hydrogel network was formed. A rheological analysis showed that as the concentration of the silk fibroin hydrogel increased its storage modulus increased significantly. The degradation behavior of silk fibroin hydrogel in different media verified its excellent stability, and the prepared silk fibroin hydrogel had good biocompatibility and an excellent drug-loading capacity. After the protein model drug BSA was loaded, the cumulative drug release within 12 h reached 80%. We hope that these investigations will promote the potential utilities of silk fibroin hydrogels in clinical medicine.     

强韧支架用丝素蛋白基生物墨水及其3D打印支架模拟软件的开发

At present, the existing scaffold materials cannot well meet the high strength and toughness requirements for the repairing of typical stressed tissues. And the commercial software for 3D printing scaffold modeling and mechanical performance simulation is complex to operate and has poor interoperability with 3D printers. In order to solve these problems, a silk fibroin (SF) based bio-ink was prepared for tough scaffold, and a software was developed for compression performance simulation of 3D printing scaffold based on SF and finite element analysis strategy. The printability of the bio-ink and the mechanical properties of the corresponding hydrogels and 3D printing scaffolds were characterized. The cell compatibility of the related scaffolds was evaluated by using fibroblasts and living/dead staining kit. Based on the SF based bio-ink, scaffolds with different heights and porosities were designed and printed. By using the developed software and the universal testing machine, the compression performance of related scaffolds was simulated and tested separately, and further compared with each other. Results show that the SF based bio-ink has good printability. And the 3D printing scaffold prepared by this ink presents high strength and toughness (modulus of elasticity: (1.86 ± 0.28)MPa, modulus of compression: (1.95 ± 0.11)MPa, elongation at break: (114.03 ± 14.40)%, compression strain ≥ 70%). In addition, the scaffold has good cell compatibility (L929 cell viability≥92.4%), which is expected to be used for the repair and regeneration of stressed tissues. The software is easy to operate, and can be used not only for the modeling of 3D printing scaffolds, but also for accurately predicting their compressive mechanical properties. In addition, the model data can also be directly imported into the 3D printer to guide the efficient preparation of the corresponding 3D printing scaffolds. This research is expected to provide important guidance for the rapid design and fabrication of tissue specific 3D printing scaffolds with bionic structure and mechanical properties. © Eco-Vector, 2023. All rights reserved.     

3D Printing of Silk Protein Structures by Aqueous Solvent‐Directed Molecular Assembly

Hierarchical molecular assembly is a fundamental strategy for manufacturing protein structures in nature. However, to translate this natural strategy into advanced digital manufacturing like three‐dimensional (3D) printing remains a technical challenge. This work presents a 3D printing technique with silk fibroin to address this challenge, by rationally designing an aqueous salt bath capable of directing the hierarchical assembly of the protein molecules. This technique, conducted under aqueous and ambient conditions, results in 3D proteinaceous architectures characterized by intrinsic biocompatibility/biodegradability and robust mechanical features. The versatility of this method is shown in a diversity of 3D shapes and a range of functional components integrated into the 3D prints. The manufacturing capability is exemplified by the single‐step construction of perfusable microfluidic chips which eliminates the use of supporting or sacrificial materials. The 3D shaping capability of the protein material can benefit a multitude of biomedical devices, from drug delivery to surgical implants to tissue scaffolds. This work also provides insights into the recapitulation of solvent‐directed hierarchical molecular assembly for artificial manufacturing.     

Cell‐Laden Hydrogels for Multikingdom 3D Printing

Living materials are created through the embedding of live, whole cells into a matrix that can house and sustain the viability of the encapsulated cells. Through the immobilization of these cells, their bioactivity can be harnessed for applications such as bioreactors for the production of high‐value chemicals. While the interest in living materials is growing, many existing materials lack robust structure and are difficult to pattern. Furthermore, many living materials employ only one type of microorganism, or microbial consortia with little control over the arrangement of the various cell types. In this work, a Pluronic F127‐based hydrogel system is characterized for the encapsulation of algae, yeast, and bacteria to create living materials. This hydrogel system is also demonstrated to be an excellent material for additive manufacturing in the form of direct write 3D‐printing to spatially arrange the cells within a single printed construct. These living materials allow for the development of incredibly complex, immobilized consortia, and the results detailed herein further enhance the understanding of how cells behave within living material matrices. The utilization of these materials allows for interesting applications of multikingdom microbial cultures in immobilized bioreactor or biosensing technologies.     

双载药丝蛋白水凝胶的构筑及其释药性能研究

可注射水凝胶因其可以长时间在肿瘤病灶部位缓慢释放药物及避免外科手术风险等而备受关注.本工作将载有盐酸阿霉素(DOX)的介孔硅分子筛SBA-15/DOX与混有血管阻断剂康普瑞汀磷酸二钠盐(CA4P)的再生丝蛋白(RSF)水溶液均匀混合后,根据丝蛋白能在多种促进条件下易形成β-折叠构象并成为物理交联点/区域的特性,通过超声...     

Generation of Haploid Spermatids on Silk Fibroin-Alginate-Laminin-Based Porous 3D Scaffolds

In vitro production of sperm is a desirable idea for fertility preservation in azoospermic men and prepubertal boys suffering from cancer. In this study, a biocompatible porous scaffold based on a triad mixture of silk fibroin (SF), alginate (Alg), and laminin (LM) is developed to facilitate the differentiation of mouse spermatogonia stem cells (SSCs). Following SF extraction, the content is analyzed by SDS-PAGE and stable porous 3D scaffolds are successfully prepared by merely Alg, SF, and a combination of Alg-SF, or Alg-SF-LM through freeze-drying. Then, the biomimetic scaffolds are characterized regarding the structural and biological properties, water absorption capacity, biocompatibility, biodegradability, and mechanical behavior. Neonatal mice testicular cells are seeded on three-dimensional scaffolds and their differentiation efficiency is evaluated using real-time PCR, flow cytometry, immunohistochemistry. Blend matrices showed uniform porous microstructures with interconnected networks, which maintained long-term stability and mechanical properties better than homogenous structures. Molecular analysis of the cells after 21 days of culture showed that the expression of differentiation-related proteins in cells that are developed in composite scaffolds is significantly higher than in other groups. The application of a composite system can lead to the differentiation of SSCs, paving the way for a novel infertility treatment landscape in the future.     

Crosslinked Silk Fibroin/Gelatin/Hyaluronan Blends as Scaffolds for Cell-Based Tissue Engineering

3D porous scaffolds fabricated from binary and ternary blends of silk fibroin (SF), gelatin (G), and hyaluronan (HA) and crosslinked by the carbodiimide coupling reaction were developed. Water-stable scaffolds can be obtained after crosslinking, and the SFG and SFGHA samples were stable in cell culture medium up to 10 days. The presence of HA in the scaffolds with appropriate crosslinking conditions greatly enhanced the swellability. The microarchitecture of the freeze-dried scaffolds showed high porosity and interconnectivity. In particular, the pore size was significantly larger with an addition of HA. Biological activities of NIH/3T3 fibroblasts seeded on SFG and SFGHA scaffolds revealed that both scaffolds were able to support cell adhesion and proliferation of a 7-day culture. Furthermore, cell penetration into the scaffolds can be observed due to the interconnected porous structure of the scaffolds and the presence of bioactive materials which could attract the cells and support cell functions. The higher cell number was noticed in the SFGHA samples, possibly due to the HA component and the larger pore size which could improve the microenvironment for fibroblast adhesion, proliferation, and motility. The developed scaffolds from ternary blends showed potential in their application as 3D cell culture substrates in fibroblast-based tissue engineering.     

丝胶基半互穿温敏凝胶的合成及其溶胀行为的研究

采用半互穿网络技术, 将具有生物相容性的丝胶蛋白(silk sericin)作为第二网络进入聚(N-异丙基丙烯酰胺)(PNIPAM)水凝胶网络中, 在水溶液中制备得到具有半互穿网络结构的丝胶基温敏水凝胶(SS/PNIPAM semi-IPNs). 采用称重法研究了产物的(消)溶胀、温度敏感性、最大溶胀度及脉冲响应行为; 利用扫描电镜(SEM), 差示扫描量热仪(DSC)和动态热机械分析仪(DMA)分别考察了产物的内部形态、热相转变行为和其储能模量随温度的变化. 结果表明: 具有较高亲水性的丝胶蛋白的引入增大了semi-IPNs水凝胶的内部孔径, 导致SS/PNIPAM半互穿水凝胶的溶胀度增加, 并且其储能模量随温度变化更明显. 相比于纯PNIPAM水凝胶, 半互穿水凝胶的消溶胀速率和低临界溶解温度(LCST)变化不大.     

Preparation and characterization of novel silk fibroin/2-(N,N-dimethylamino)ethyl methacrylate based composite hydrogels with enhanced mechanical properties for controlled release of cefixime

Hydrogels with improved mechanical properties have been particularly attractive for their applications in the biomedical area including wound healing. For this purpose, a series of novel composite hydrogels based on silk fibroin (SF) and 2-(N,N-dimethylamino) ethyl methacrylate (DMAEMA) were fabricated. The swelling and mechanical tests indicated that an optimum design of hydrogel was essential to provide a high degree of water uptake, higher tensile strength and elongation at break values. Here, the S40D60 was exhibited superior swelling and strong mechanical characteristics than all the other hydrogels with different compositions. Furthermore, it was observed that the cefixime was released from the formulation of S40D60 in a sustainable manner and the drug release rate can be controlled by pH of the dissolution medium. According to these findings, it is suggested that the optimal formulation of S40D60 would be effectively performed in situ drug therapy for wound healing.     

Characterization of Hydrogels Made of a Novel Spider Silk Protein eMaSp1s and Evaluation for 3D Printing

Recombinantly produced spider silk proteins have high potential for bioengineering and various biomedical applications because of their biocompatibility, biodegradability, and low immunogenicity. Here, the recently described small spider silk protein eMaSp1s is assembled into hydrogels, which can be 3D printed into scaffolds. Further, blending with a recombinantly produced MaSp2 derivative eADF4(C16) alters the mechanical properties of the resulting hydrogels. Different spider silk hydrogels also show a distinct recovery after a high shear stress deformation, exhibiting the tunability of their features for selected applications.     

Fast Visible-Light 3D Printing of Conductive PEDOT:PSS Hydrogels

Functional inks for light-based 3D printing are actively being searched for being able to exploit all the potentialities of additive manufacturing. Herein, a fast visible-light photopolymerization process is showed of conductive PEDOT:PSS hydrogels. For this purpose, a new Type II photoinitiator system (PIS) based on riboflavin (Rf), triethanolamine (TEA), and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is investigated for the visible light photopolymerization of acrylic monomers. PEDOT:PSS has a dual role by accelerating the photoinitiation process and providing conductivity to the obtained hydrogels. Using this PIS, full monomer conversion is achieved in less than 2 min using visible light. First, the PIS mechanism is studied, proposing that electron transfer between the triplet excited state of the dye (³Rf*) and the amine (TEA) is catalyzed by PEDOT:PSS. Second, a series of poly(2-hydroxyethyl acrylate)/PEDOT:PSS hydrogels with different compositions are obtained by photopolymerization. The presence of PEDOT:PSS negatively influences the swelling properties of hydrogels, but significantly increases its mechanical modulus and electrical properties. The new PIS is also tested for 3D printing in a commercially available Digital Light Processing (DLP) 3D printer (405 nm wavelength), obtaining high resolution and 500 µm hole size conductive scaffolds.     

Gelatin Methacryloyl Hydrogels in the Absence of a Crosslinker as 3D Glioblastoma Multiforme (GBM)‐Mimetic Microenvironment

3D platforms are important for monitoring tumor progression and screening drug candidates to eradicate tumors such as glioblastoma multiforme (GBM), a malignant type of human brain tumor. Here, a new strategy is reported that exploits visible‐light‐induced crosslinking of gelatin where the reaction is carried out in the absence of an additional crosslinker. Visible light‐induced crosslinking promotes the design of cancer microenvironment‐mimetic system without compromising the cell viability during the process and absence of crosslinker facilitates the synthesis of the unique construct. Suspension and spheroid‐based models of GBM are used to investigate cellular behavior, expression profiles of malignancy, and apoptosis‐related genes within this unique network. Furthermore, sensitivity to an anticancer drug, Digitoxigenin, treatment is investigated in detail. The data suggest that U373 cells, in sparse or spheroid form, have significantly decreased expressions of apoptosis‐activating genes, Bad, Puma, and Caspase‐3, and a high expression of prosurvival Bcl‐2 gene within GelMA hydrogels. Matrix‐metalloproteinase genes are also upregulated within GelMA, suggesting positive contribution of gels on extracellular remodeling of cancer cells. This unique photocurable gelatin holds great potential for clinical translation of cancer research through the analysis of 3D malignant cancer cell behavior, and hence for more efficient treatment methods for GBM.     

桑蚕丝素-RGD融合蛋白的固态结构及其细胞粘附性分析

利用基因工程方法把含有短肽RGD的氨基酸序列连接到桑蚕丝素蛋白的结晶序列GAGAGS上, 通过调节DNA的聚合度, 合成了具有[TGRGDSPA(GVPGV)₂GG(GAGAGS)₃AS]_n一级结构、不同分子量大小的桑蚕丝素-RGD融合蛋白, 并且通过在M9培养基中添加[3-¹³C]Ala的方法进行融合蛋白的稳定同位素标记. ¹³C CP/MAS NMR结果显示, 融合蛋白中的GAGAGS部分具有与天然桑蚕丝素结晶部分相同的分子结构, 即Silk I处理后为均一的分子结构, 而Silk II处理后为不均一的分子结构, 它包含了三种不同的结构成分. 另一方面, 通过对小鼠成纤维细胞BALB/3T3在不同蛋白材料载体上的粘附和增殖性能的测定结果显示, 融合蛋白对细胞的增殖性能与天然胶原蛋白相近, 但表现出了比胶原蛋白更好的细胞粘附性能. 该研究结果显示, 如果对该桑蚕丝素-RGD融合蛋白进行适当加工, 可能适合于组织工程支架材料的应用.     

Immunogenic Potential and Therapeutic Efficacy of Multi-Epitope Encapsulated Silk Fibroin Nanoparticles against Pseudomonas aeruginosa-Mediated Urinary Tract Infections

Pseudomonas aeruginosa (P. aeruginosa) causing urinary tract infections (UTIs) are a major concern among hospital-acquired infections. The need for an effective vaccine that reduces the infections is imperative. This study aims to evaluate the efficacy of a multi-epitope vaccine encapsulated in silk fibroin nanoparticles (SFNPs) against P. aeruginosa-mediated UTIs. A multi-epitope is constructed from nine proteins of P. aeruginosa using immunoinformatic analysis, expressed, and purified in BL21 (DE3) cells. The encapsulation efficiency of the multi-epitope in SFNPs is 85% with a mean particle size of 130 nm and 24% of the encapsulated antigen is released after 35 days. The vaccine formulations adjuvanted with SFNPs or alum significantly improve systemic and mucosal humoral responses and the cytokine profile (IFN-γ, IL-4, and IL-17) in mice. Additionally, the longevity of the IgG response is maintained for at least 110 days in a steady state. In a bladder challenge, mice treated with the multi-epitope admixed with alum or encapsulated in SFNPs demonstrate significant protection of the bladder and kidneys against P. aeruginosa. This study highlights the promising therapeutic potential of a multi-epitope vaccine encapsulated in SFNPs or adjuvanted with alum against P. aeruginosa infections.     

3D Printing of Monolithic Proteinaceous Cantilevers Using Regenerated Silk Fibroin

Silk fibroin, regenerated from Bombyx mori, has shown considerable promise as a printable, aqueous-based ink using a bioinspired salt-bath system in our previous work. Here, we further developed and characterized silk fibroin inks that exhibit concentration-dependent fluorescence spectra at the molecular level. These insights supported extrusion-based 3D printing using concentrated silk fibroin solutions as printing inks. 3D monolithic proteinaceous structures with high aspect ratios were successfully printed using these approaches, including cantilevers only supported at one end. This work provides further insight and broadens the utility of 3D printing with silk fibroin inks for the microfabrication of proteinaceous structures.     

Fibroin-functionalized magnetic carbon nanotube as a green support for anchoring silver nanoparticles as a biocatalyst for A3 coupling reaction

Novel and powerful fibroin-functionalized magnetic carbon nanotube–supported silver nanoparticles (CNT–Fe₃O₄–fibroin–Ag) were successfully synthesized as a nontoxic and inexpensive biocatalyst. The structure of the organic–inorganic hybrid bionanocomposite was characterized by various techniques such as Fourier transform infrared spectroscopy, thermogravimetric analysis, energy-dispersive X-ray, field emission-scanning electron microscopy, transmission electron microscopy, X-ray diffraction, vibrating sample magnetometry, atomic absorption spectroscopy, and inductively coupled plasma-optical emission spectrometry. Then, the catalytic activity of synthesized bionanocomposite was evaluated in the three-component A³ coupling reaction under solvent-free conditions with good to excellent yields. Several propargylamine derivatives were synthesized by the reaction of different aldehydes with amines and phenylacetylene. Biodegradability, biocompatibility, availability, easy synthesis, high stability, high-throughput, cost-effectiveness, and efficient magnetic separation are some advantages of this catalyst that make it economically justified and sustainable. Moreover, the catalyst can be recycled for several runs without appreciable loss in its catalytic activity.