Synthesis of a Photoresponsive Liquid‐Crystalline Polymer Containing Azobenzene

The synthesis of an oriented liquid‐crystalline photoresponsive polymer, prepared by polymerization of mono‐ and di‐acrylates, both of which contain azobenzene chromophores, is reported. The prepared free‐standing polymer film shows strong reversible photoinduced deformation upon exposure to unpolarized UV light at 366 nm, as a result of an optically induced isomeric change of the azobenzene moieties in the polymer network. The synthesis process is relatively simple and more efficient compared to conventional ones, and can be used to synthesize other liquid‐crystalline photoresponsive polymers. The use of this photoresponsive polymer film as an optical high‐pass/low‐pass switch under UV or natural light irradiation for a laser beam is demonstrated. This photoresponsive polymer may have applications in robotic systems, artificial muscles, and actuators in microelectromechanical systems (MEMS) and labs on chips.

     

Precise Control of Photoinduced Birefringence in Azobenzene‐Containing Liquid‐Crystalline Polymers by Post Functionalization

A series of functionalized liquid‐crystalline polymer materials with different degrees of functionality was synthesized by a post Sonogashira cross‐coupling reaction of a polymer precursor. The post‐functionalization was carried out under mild conditions and showed a high yield. Although a highly birefringent azotolane group was introduced into the polymer precursor, the photoresponse of the functionalized liquid‐crystalline materials was not obviously changed. By adjusting the content of azotolane groups, precise control of the photoinduced birefringence was successfully obtained after thermal enhancement upon annealing. The present method to gain precise control of photoinduced birefringence might enable one to finely photocontrol the optical performances of materials, and may have a potential application as an advanced process for photonic materials.

     

Photoresponsive Amphiphilic Macrocycles Containing Main‐Chain Azobenzene Polymers

Herein, the first example of photosensitive cyclic amphiphilic homopolymers consisting of multiple biphenyl azobenzene chromophores in the cyclic main chain tethered with hydrophilic tetraethylene glycol monomethyl ether units is presented. The synthetic approach involves sequentially performed thermal catalyzed “click” step‐growth polymerization in bulk, and Cu(I)‐catalyzed azide–alkyne cycloaddition (CuAAC) intramolecular cyclization from α‐alkyne/ω‐azide linear precursors. It is observed that such amphiphilic macrocycles exhibit increased glass transition temperatures (T_g), slightly faster trans–cis–trans photoisomerization, and enhanced fluorescence emission intensity compared with the corresponding linear polymers. In addition, the cyclic amphiphilic homopolymers self‐assemble into spherical nanoparticles with smaller sizes which possess slower photoresponsive behaviors in a tetrahydrofuran/water mixture compared with those of the linear ones. All these interesting observations suggest that the cyclic topology has a great influence on the physical properties and self‐assembly behavior of these photoresponsive amphiphilic macrocycles in general.

     

Dynamic Temperature Distribution in Photo‐induced Alignment of Azobenzene Liquid Crystalline Polymer

A theoretical model has been established to describe the dynamic temperature distribution during the alignment of an azobenzene liquid crystalline polymer irradiated by a linearly polarized laser beam. The dynamic heat diffusion equations are used, and the relationship between heat source item and time is introduced, based on experimental results. With the model, the contours of the temperature distribution at different time have been worked out. It can be found from the theoretical model that there is a maximum temperature rise during the photo‐induced alignment, which is coincident with the analysis of experimental observations. The existence of a minimum laser power and an offset photo‐alignment temperature T_off required to carry on photo‐induce alignment are explained based on the theoretical model.

Temperature distribution after two minutes.     

Reversible Photoinduced Switching of Permeability in a Cast Non‐Porous Film Comprising Azobenzene Liquid Crystalline Polymer

Permeation characteristics of an azobenzene‐containing liquid crystalline (LC) non‐porous film are investigated using a metallic corrosion method. Thin films (300 nm) are fabricated by the solution casting of an azobenzene side‐chain LC polymer on freshly polished carbon steel coupons. Coated coupons are treated under the following conditions: a) gradual annealing at a cooling rate lower than 1 °C · min⁻¹ from 150 °C (above its T_g) to room temperature, and b) irradiation at 465 nm (20 mW · cm⁻²) with either circularly polarized light (CPL) or non‐polarized light (NPL). The morphology of these films is characterized using X‐ray diffraction, polarized optical microscopy, and transmission measurements. The results suggest that the annealing treatment resulted in the formation of a polydomain structure consisting of locally ordered small smectic domains that lack mutual orientation. Ordered micro domains are surrounded by disordered phases. CPL and NPL irradiation generates a monodomain orientated structure and an isotropic liquid crystal glass, respectively. The permeability of these non‐porous films treated by CPL, NPL, and annealing are found to be 6.14 × 10⁻⁴, 1.92 × 10⁻², and 1.56 × 10⁻³ cm³ · m⁻² · d⁻¹. An orientation‐dependent structure model is constructed to explain the permeation phenomenon, considering the ordered phase is impermeable, only the disordered phase is accessible to penetrating molecules. Fast switching of gas permeation is demonstrated by alternative irradiation of the film with CPL and NPL, which results in an approximately 30‐fold difference in the permeability of the non‐porous film.

     

Meso‐ and Microscopic Motions in Photoresponsive Liquid Crystalline Polymer Films

Photoresponsive azobenzene‐containing systems ranging from molecular to macroscopic material levels have greatly been increasing their significance in materials chemistry. This review focuses on the studies on light induced or triggered motions in azobenzene liquid crystalline (LC) polymer films at mesoscopic and microscopic levels. Due to the cooperative nature of liquid crystalline materials, highly efficient photoalignment and photo‐triggered migrating motions are realized in mostly repeated manners. Here, recent advances in surface‐grafted LC polymer brushes, LC block copolymer films, and LC polymer films that exhibit mass migrations are overviewed. Such newly emerged photoresponsive systems are expected to provide new possibilities and applications in polymer thin film technologies.

     

Azobenzene Liquid‐Crystalline Polymer for Optical Switching of Grating Waveguide Couplers with a Flat Surface

Grating waveguide couplers with a flat surface were fabricated in an azobenzene liquid‐crystalline polymer film by holographic lithography using Ar⁺ laser beams at 488 nm. When a probe beam at 633 nm was incident to one grating of a grating waveguide coupler, the beam propagated in the waveguide and an output beam came out from the other grating with the throughput coupling efficiency of ≈5%. Upon irradiation of the film between two gratings with UV light to cause trans–cis photoisomerization of the azobenzene moiety, the intensity of the output beam was repeatedly switched. It was found that the alternating irradiation at 366 and 436 nm induced reversible changes in the intensity of the guided probe beam.

     

Photoswitchable Smectic Liquid‐Crystalline Elastomers

Summary: We succeeded in the synthesis of azo side chain containing polysiloxanes with broad smectic C* and A phases. In these polymers the phase transition temperatures can be shifted reversibly by up to 17 °C by irradiation with UV (cis) or VIS (trans) light. Thin films of these polymers in the smectic phase (both on substrates and as free‐standing films) orient perfectly in a homeotropic manner. As a consequence, the azo chromophores do no longer absorb during a perpendicular illumination with light (dichroism). It is thus possible to crosslink these films photochemically to prepare “photoswitchable smectic LC elastomers”.

The trans‐cis isomerization in homeotropically oriented LC elastomers.     

Thermotropic Liquid‐Crystalline Polymer Derived from Natural Cinnamoyl Biomonomers

Summary: The compound 4‐hydroxycinnamic acid (4HCA), a natural biomonomer, is polymerized by melt polycondensation to yield a liquid‐crystalline biopolymer (P4HCA) with UV reactivity. L929 cells were successfully incubated on P4HCA films at 37 °C.

Structure of poly(4‐hydroxycinnamic acid) (P4HCA) and its crossed‐polarizing optical micrograph in the nematic state. Inset image: optical micrograph of L929 mouse fibroblasts adhered on P4HCA film after 24 h incubation at 37 °C.     

Photomobile Polymer Materials: Photoresponsive Behavior of Cross‐Linked Liquid‐Crystalline Polymers with Mesomorphic Diarylethenes

Cross‐linked liquid‐crystalline (LC) polymers with a mesomorphic diarylethene were prepared to demonstrate a versatile strategy for cross‐linked photochromic LC polymers as photomobile materials. Upon exposure to UV light to cause photocyclization of the diarylethene chromophore, the cross‐linked polymer films bend toward an actinic light source. By irradiation with visible light to cause a closed‐ring to open‐ring isomerization, the bent films revert to the initial flat state. Without visible‐light irradiation, the bent films remain bent even at 120 °C, indicating high thermal stability of the cross‐linked diarylethene LC polymers.     

Branched Azobenzene Side‐Chain Liquid‐Crystalline Copolymers Obtained by Self‐Condensing ATR Copolymerization

Summary: The one step synthesis of a series of branched azobenzene side‐chain liquid‐crystalline copolymers by the self‐condensing vinyl copolymerization (SCVCP) of a methyl acrylic AB* inimer, 2‐(2‐bromoisobutyryloxy)ethyl methacrylate (BIEM), with the monomer 6‐(4‐methoxy‐azobenzene‐4′‐oxy)hexyl methacrylate (M), by atom transfer radical polymerization (ATRP) in the presence of CuBr/N,N,N′,N′,N″‐pentamethyldiethylenetriamine as a catalyst system, and in chlorobenzene solvent, is reported. The degree of branching (DB), and the molecular weights and polydispersities of the resultant polymers were determined by NMR spectroscopy and size exclusion chromatography, respectively. The phase behaviors of the branched copolymers were characterized by differential scanning calorimetry (DSC) and thermal polarized optical microscopy (POM). The degree of branching of the branched copolymers could be controlled by the comonomer ratio in the feed and influenced their liquid‐crystal properties. Liquid‐crystal properties were not exhibited when the comonomer ratio was low. Comonomer ratios greater than 8 gave polymers with a lower number of branches, which exhibited both a smectic and a nematic phase.

A polarized optical micrograph of the smectic phase texture of a polymer synthesized here with a higher comonomer feed ratio (magnification × 400).     

New Architecture of Liquid‐Crystalline Polymers from Fluorinated Vinylcyclopropanes

A new class of fluorinated polymers was prepared by radical ring‐opening homopolymerization of vinylcyclopropane monomers with a perfluorinated (CF₂)_nF chain (n = 6, 8, or 10). The polymers were in fact copolymers composed of 1,5‐linear and cyclobutane isomer units, the relative content of which depended on n. Surprisingly, they formed liquid‐crystalline mesophases (SmB_d and/or SmA_d), which was attributed to phase separation of the incompatible fluorocarbon and hydrocarbon components of the repeat unit.     

Light‐Switchable Behavior of a Microarray of Azobenzene Liquid Crystal Polymer Induced by Photodeformation

A microarray with a period of about 1 μm was fabricated from a crosslinked liquid crystal polymer (CLCP) containing azobenzene groups by using the replica molding technique. In accordance with the photoinduced deformation of the CLCP induced by the photoisomerization of the azobenzene groups, on‐off switch behavior on the reflection spectra of the microarray was observed by alternate irradiation with UV–Vis light. The reversible switch behavior indicates that the azobenzene CLCP microarray has potential applications in optical actuators.     

Amphiphilic Comb‐Like Poly(oxyethylene) and Its Complexes with LiClO4: Synthesis and Mesomorphic Behavior

Summary: We prepared an amphiphilic, comb‐like poly(oxyethylene) containing decyl‐tri(oxyethylene) amphiphiles in the side chain using a polymer analogous reaction to obtain a novel nonionic amphiphilic polymeric system with high molecular weight. The amphiphilic comb‐like poly(oxyethylene) itself only showed a side‐chain crystalline phase below its melting temperature of −31 °C. When the polymer was mixed with lithium perchlorate, a smectic liquid‐crystalline phase appeared. The ordered phases of the polymer and the polymer mixture were studied by differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction.

POM image (200 X) of D3OTP1 at room temperature.     

Effect of Molecular Weight on Photoinduced Birefringence in a Chiral Liquid Crystalline Azodye Polymer

Summary: The evolution of the photoinduced birefringence in thin films of narrow polymer fractions is studied and compared with the behavior of the non‐fractionated polymer. The Δn_ind value decreases by increasing the degree of polymerization ( ) within the oligomeric range but becomes independent of molecular weight starting from a of ≈70. Thermal pretreatment of the films results in higher photoinduced birefringence. The films show good stability of the photorecording.

Birefringence induced after 10 min, Δn_ind(600) and its growth rate at the same moment versus molecular weight.     

Photomobile Polymer Materials with Crosslinked Liquid‐Crystalline Structures: Molecular Design,Fabrication, and Functions

Crosslinked liquid‐crystalline polymer materials that macroscopically deform when irradiated with light have been extensively studied in the past decade because of their potential in various applications, such as microactuators and microfluidic devices. The basic motions of these materials are contraction–expansion and bending–unbending, which are observed mainly in polysiloxanes and polyacrylates that contain photochromic moieties. Other sophisticated motions such as twisting, oscillation, rotation, and translational motion have also been achieved. In recent years, efforts have been made to improve the photoresponsive and mechanical properties of this novel class of materials through the modification of molecular structures, development of new fabrication methods, and construction of composite structures. Herein, we review structures, functions, and working mechanisms of photomobile materials and recent advances in this field.     

Liquid‐crystalline azobenzene‐containing ferrocene‐based polymers: study on synthesis and properties of main‐chain ferrocene‐based polyesters with azobenzene in the side chain

Ferrocene‐based polymers are characterized by their electrochemical activity, good redox properties, thermal, photochemical stability, and liquid crystallinity, and thus they have various applications in different fields. A comprehensive investigation on the synthesis and properties of three novel main‐chain ferrocene‐based polyesters with azobenzene in the side chain (MFPAS) was carried out. The main‐chain ferrocene‐based polyester, poly(N‐phenyldiethanolamine 1,1′‐ferrocene dicarboxylate (PPFD), was synthesized via the solution polycondensation reaction of 1,1′‐ferrocenedicarbonyl chloride with phenyldiethanolamine (PDE). The novel MFPAS were synthesized via the post‐polymerization azo‐coupling reaction of PPFD with three different 4‐substituted anilines including 4‐nitroaniline, 4‐aminobenzoic acid, and 4‐aminobenzonitrile to produce 4‐nitrophenylazo‐functionalized‐PPFD (PPFD‐NT), 4‐carboxyphenylazo‐functionalized‐PPFD (PPFD‐CA), and 4‐cyanophenylazo‐functionalized‐PPFD (PPFD‐CN), respectively. All the synthesized polymers were characterized by ¹H NMR spectroscopy, Fourier transform infrared spectroscopy, and UV–visible spectroscopy. In addition, powder X‐ray diffraction patterns were measured for the synthesized polymers. The photoisomerization of the MFPAS was studied. The thermal properties of the MFPAS were studied using thermogravimetric analysis and differential scanning calorimetry. PPFD‐CA and PPFD‐CN were found to be more thermally stable than PPFD‐NT. Finally, the liquid‐crystalline properties of PPFD and the MFPAS were examined using polarized optical microscope. It was found that all the polymers possessed nematic phases and exhibited textures with schlieren disclinations. Copyright © 2012 John Wiley & Sons, Ltd.     

Preparation of Oriented Liquid‐Crystalline/Isotropic Block Copolymer Films with Parallel or Perpendicular Arrangement of Smectic Layers and Lamellar Microdomains

Films of a symmetric liquid‐crystalline/isotropic block copolymer consisting of a smectic LC side‐chain polymer and polystyrene were prepared by solvent casting from solution and from the isotropic melt. By annealing the solvent‐cast film in the S_A phase an oriented microphase‐separated film of lamellar morphology was obtained in which both the lamellae of the block copolymer and the smectic layers of the LC block were oriented parallel to the film surface. A lamellar morphology with perpendicular orientation of lamellae and smectic layers was generated by cooling the block copolymer from the melt.     

Synthesis,Liquid‐Crystalline Properties,and Supramolecular Nanostructures of Dendronized Poly(isocyanide)s and Their Precursors

A series of novel dendronized π‐conjugated poly(isocyanide)s were synthesized successfully by using a Pd? Pt μ‐ethynediyl dinuclear complex ([ClPt{P(C₂H₅)₃}₂C?CPt{P(C₂H₅)₃}₂Cl]) as the initiator. The polymerizations of the dendronized monomers follow first‐order kinetics, indicating that living polymerization takes place. The obtained polymers exhibit narrow polydispersities in the range of 1.03–1.20. Thermal properties of the poly(isocyanide)s as well as their isocyanide monomers and precursors with formamido (HCONH‐) moieties as apexes were investigated by using differential scanning calorimetry (DSC), polarized optical microscopy (POM) and wide‐angle X‐ray diffraction (WAXD). Both the peripheries and the apex groups of the dendrons affect the formation of supramolecular column and/or cubic phases of the precursors and monomers. The formamido precursor forms a liquid‐crystalline phase due to intermolecular hydrogen bonding. The isocyanide monomer lacks this hydrogen‐bonding ability and does not display an organized mesophase. All of the rigid poly(isocyanide)s with the monodendrons exhibit columnar liquid‐crystalline phases. Interestingly, cylindrical structures of a poly(isocyanide) were directly visualized by using transmission electron microscopy (TEM).     

Opto‐Mechanical Effect in Photoactive Nematic Side‐Chain Liquid‐Crystalline Elastomers

The mechanical behaviour of monodomain nematic side‐chain liquid‐crystalline elastomers containing azoderivatives as pendant groups or crosslinkers has been studied under UV irradiation and in the darkness at different temperatures. From the evaluation of the opto‐mechanical experiments, the mechanical efficiency, kinetic rates, activation energies and the isomerization mechanism of the azocompounds in the liquid‐crystalline matrix could be determined, as well as the effect of the chemical constitution of the azobenzene derivatives and their role in the elastomeric network.