Water‐soluble polypeptides bearing 1‐alkylimidazolium (methyl or n‐butyl) and various counter‐anions (i.e., Cl−, I− or BF4−) are prepared by ring‐opening polymerization of γ‐4‐chloromethylbenzyl‐l‐glutamate‐based N‐carboxyanhydride ( 3 ), post‐polymerization of poly(γ‐4‐chloromethylbenzyl‐l‐glutamate) ( 4 ), and ion‐exchange reaction. Circular dichroism (CD) analysis reveals that the resulting polypeptides adopt an α‐helical conformation in water with a fractional helicity in the range of 30%–56% at 20 °C and exhibit good conformational stability against temperature variations. The polypeptides exhibit lower critical solution temperature (LCST)‐type or upper critical solution temperature (UCST)‐type transitions in organic solvents or in water. The UCST‐type transition temperature (Tpt) in water is independent on the molecular weight, yet it decreases upon addition of NaCl and increases upon addition of NaI or NaBF4, suggesting a mainly electrostatic interaction mechanism.
Pentafluorophenyl end‐capped poly(ethylene glycol) (PF‐PEG‐PF) aqueous solution shows a lower critical solution temperature (LCST), which is sensitive to the type of gases dissolved in the solution. LCST increases from 24.5 to 26 °C when dissolved carbon dioxide is replaced by oxygen. The transparent‐to‐turbid transition is reversibly observed when the dissolved carbon dioxide in the PF‐PEG‐PF aqueous solution is exchanged with oxygen, and vice versa, at 24.5 °C. 19F NMR and 1H NMR spectra of the PF‐PEG‐PF in D2O suggest that 1) dehydration of PEG is the main reason of developing LCST of the PF‐PEG‐PF aqueous solution, 2) minute differences in the intermolecular interactions, as demonstrated by changes in the chemical shift of the PF‐PEG‐PF peaks, induce such a difference in LCST. This paper provides a new insight in designing a stimuli‐responsive polymer in that fine tuning of a phase transition can be controlled by the type of dissolved gas.
The fluorinated FI–Ti catalyst bis[N‐(3‐propylsalicylidene)‐pentafluoroanilinato] titanium(IV) dichloride (PFI) combined with dried methylaluminoxane (dMAO) is investigated for ethylene/1‐hexene copolymerization at 50 °C under atmospheric pressure. The reaction shows good livingness and has a high activity at high [H]/[E] molar ratios up to 14. Ultrahigh molecular weight (>1.4 × 106 g mol−1) copolymers with high 1‐hexene content (>25 mol%) are prepared. Kinetic parameters of the copolymerization with PFI are determined. The first‐order Markov statistics applies and the product of the reactivity ratios r1r2 is close to 1, giving random unit distributions.
A novel thermally sensitive shape memory (SM) hydrogel is prepared by block copolymerization of a cationic surfactant monomer, dimethylhexadecyl[2‐(dimethylamino)ethylmethacrylate]ammoniumbromide (C16DMAEMA), and acrylamide (AM) in the presence of α‐cyclodextrin (α‐CD) using N,N’‐methylenebisacrylamide (MBA) as a crosslinker. XRD, solid state 13C NMR, and DSC measurements show that the crystalline domains, induced by the hydrogen bonds between α‐CDs threaded on the hydrophobic units of the polymer chains through the host‐guest approach, can reversibly melt and crystallize at different temperatures. Rheological measurements show that both the elastic modulus G’ and viscous modulus G’’ drastically change due to the formation and dissolution of the crystalline domains. These thermo‐sensitive crystalline domains serve as reversible physical crosslinks, endowing the hydrogel with excellent SM properties. Cyclic experiments show that the hydrogel can recover to almost 100% of the deformation in each cycle and can be reused several times.
A random copolymer of ethylene oxide with CO2, namely, poly(ethylene carbonate/ethylene oxide) (P(EC/EO)), has been synthesized as a novel candidate for polymer electrolytes. Electrolyte composed of P(EC/EO) and lithium bis(fluorosulfonyl)imide has an ionic conductivity of 0.48 mS cm−1 and a Li transference number (t +) of 0.66 at 60 °C. To study ion‐conductive behavior of P(EC/EO)‐based electrolytes, the Fourier transform infrared (FT‐IR) technique is used to analyze the interactions between Li+ and functional groups of the copolymer. The carbonate groups may interact preferentially with Li+ rather than the ether groups in P(EC/EO). This study suggests that copolymerization of carbonate and flexible ether units can realize both high conductivity and t + for polymer electrolytes. High‐performance P(EC/EO) electrolyte is expected to be a candidate material for use in all‐solid‐state batteries.
Here, a conjugated polymer VTTPD based on thieno[3,4‐c]pyrrole‐4,6‐dione (TPD) and dithiophene with vinyl as linker is synthesized and characterized. Electrochemical and optical studies indicate the LUMO and HOMO energies of the polymer are −3.70 and −5.39 eV. Theoretical calculation with density functional theory suggests that H‐bonds are formed between the TPD carbonyl (O) and its neighboring vinyl (H) which benefit the planarity and π‐conjugation of the polymer backbone. Bottom contact bottom gate organic field effect transistor devices based on VTTPD are fabricated and examined in air. After annealing at 160 °C, the devices exhibit excellent performance of μh = 0.4 cm2 V−1 s−1, Ion/off = 106, Vth within −10 V to −5 V. Thin film morphologies before and after the annealing process are also investigated with XRD and AFM.
A one‐pot method is introduced for the successful synthesis of narrow‐distributed (Đ = 1.22) vinyl polymer with both ultrahigh molecular weight (UHMW) (Mw = 1.31 × 106 g mol−1) and micro‐/nanomorphology under mild conditions. The method involves the following four stages: homogeneous polymerization, polymerization‐induced self‐assembly (PISA), PISA and reorganization, and PISA and multiple reorganizations. The key points to the production of UHMW polystyrene are to minimize radical termination by segregating radicals in different nanoreactors and to ensure sufficient chain propagation by promoting further reorganizations of these reactors in situ. This method therefore endows polymeric materials with the outstanding properties of both UHMW and tunable micro‐/nanoparticles under mild conditions in one pot.
A facile and efficient methodology for the formation of polymer‐fullerene networks via a light‐induced reaction is reported. The photochemical crosslinking is based on a nitrile imine‐mediated tetrazole‐ene cycloaddition reaction, which proceeds catalyst‐free under UV‐light irradiation (λmax = 320 nm) at ambient temperature. A tetrazole‐functionalized polymer (Mn = 6500 g mol−1, Ð = 1.3) and fullerene C60 are employed for the formation of the hybrid networks. The tetrazole‐functionalized polymer as well as the fullerene‐containing networks are carefully characterized by NMR spectrometry, size exclusion chromatography, infrared spectroscopy, and elemental analysis. Furthermore, thermal analysis of the fullerene networks and their precursors is carried out. The current contribution thus induces an efficient platform technology for fullerene‐based network formation.
Flexible, tough, and self‐healable polymeric materials are promising to be a solution to the energy problem by substituting for conventional heavy materials. A fusion of supramolecular chemistry and polymer chemistry is a powerful method to create such intelligent materials. Here, a supramolecular polymeric material using multipoint molecular recognition between cyclodextrin (CD) and hydrophobic guest molecules at polymer side chain is reported. A transparent, flexible, and tough hydrogel (host–guest gel) is formed by a simple preparation procedure. The host–guest gel shows self‐healing property in both wet state and dry state due to reversible nature of host–guest interaction. The practical utility of the host–guest gel as a scratch curable coating is demonstrated.
A novel achiral polymer P‐1 is synthesized by the polymerization of (2,5‐bis(octyloxy)‐1,4‐phenylene)diboronic acid ( M‐1 ) with pyridine‐2,6‐diylbis(methanylylidene)bis(4‐iodoaniline) ( M‐2 ) via Pd‐catalyzed Suzuki coupling reaction. The tridentate ligand in the main chain backbone can further coordinate with Cu2+ to afford the corresponding achiral copper‐containing polymer complex P‐2 , which selectively responds to L‐/D‐histidine with significant fluorescence enhancement over other amino acids. Interestingly, P‐2 exhibits obvious CD response toward L‐ or D‐histidine compared with its model compound MC , indicating that this kind Cu(II)‐containing polymer complex sensor can be used as an effective chemosensor for enantioselective recognition of histidine enantiomers by means of CD spectroscopy.
Novel amphiphilic polypeptoid‐polyester diblock copolymers based on poly(sarcosine) (PSar) and poly(ε‐caprolactone) (PCL) are synthesized by a one‐pot glovebox‐free approach. In this method, sarcosine N‐carboxy anhydride (Sar‐NCA) is firstly polymerized in the presence of benzylamine under N2 flow, then the resulting poly(sarcosine) is used in situ as the macroinitiator for the ring‐opening polymerization (ROP) of ε‐caprolactone using tin(II) octanoate as a catalyst. The degree of polymerization of each block is controlled by various feed ratios of monomer/initiator. The diblock copolymers with controlled molecular weight and narrow molecular weight distributions (ĐM < 1.2) are characterized by 1H NMR, 13C NMR, and size‐exclusion chromatography. The self‐assembly behavior of PSar‐b‐PCL in water is investigated by dynamic light scattering (DLS) and transmission electron microscopy. DLS results reveal that the diblock copolymers associate into nanoparticles with average hydrodynamic diameters (DH) around 100 nm in water, which may be used as drug delivery carriers.
Two soluble poly(phenyltriazolylcarboxylate)s (PPTCs) with high molecular weights (M w up to 26 800) are synthesized by the metal‐free 1,3‐dipolar polycycloadditions of 4,4′‐isopropylidenediphenyl diphenylpropiolate ( 1 ) and tetraphenylethene‐containing diazides ( 2 ) in dimethylformamide at 150 °C for 12 h in high yields (up to 93%). The resultant polymers are soluble in common organic solvents and are thermally stable with 5% weight loss temperatures higher than 375 °C. The PPTCs are nonemissive in solutions, but become highly luminescent upon aggregation, showing a phenomenon of aggregation‐induced emission. Their aggregates can be used as fluorescent chemosensors for high‐sensitivity detection of explosives.
Herein, it is demonstrated that star pseudopolyrotaxanes (star‐pPRs) obtained from the inclusion complexation of α‐cyclodextrin (CD) and four‐branched star poly(ε‐caprolactone) (star‐PCL) organize into nanoplatelets in dimethyl sulfoxide at 35 °C. This peculiar property, not observed for linear pseudopolyrotaxanes, allows the processing of star‐pPRs while preserving their supramolecular assembly. Thus, original PCL:star‐pPR core:shell nanofibers are elaborated by coaxial electrospinning. The star‐pPR shell ensures the presence of available CD hydroxyl functions on the fiber surface allowing its postfunctionalization. As proof of concept, fluorescein isothiocyanate is grafted. Moreover, the morphology of the fibers is maintained due to the star‐pPR shell that acts as a shield, preventing the fiber dissolution during chemical modification. The proposed strategy is simple and avoids the synthesis of polyrotaxanes, i.e., pPR end‐capping to prevent the CD dethreading. As PCL is widely used for biomedical applications, this strategy paves the way for simple functionalization with any bioactive molecules.
Ring‐opening metathesis polymerization of 4‐phenylcyclopentene is investigated for the first time under various conditions. Thermodynamic analysis reveals a polymerization enthalpy and entropy sufficient for high molar mass and conversions at lower temperatures. In one example, neat polymerization using Hoveyda–Grubbs second generation catalyst at −15 °C yields 81% conversion to poly(4‐phenylcyclopentene) (P4PCP) with a number average molar mass of 151 kg mol−1 and dispersity of 1.77. Quantitative homogeneous hydrogenation of P4PCP results in a precision ethylene‐styrene copolymer (H2‐P4PCP) with a phenyl branch at every fifth carbon along the backbone. This equates to a perfectly alternating trimethylene‐styrene sequence with 71.2% w/w styrene content that is inaccessible through molecular catalyst copolymerization strategies. Differential scanning calorimetry confirms P4PCP and H2‐P4PCP are amorphous materials with similar glass transition temperatures (Tg) of 17 ± 2 °C. Both materials present well‐defined styrenic analogs for application in specialty materials or composites where lower softening temperatures may be desired.
In this study, a material is designed which combines the properties of shape‐memory and electroactive polymers. This is achieved by covalent cross‐linking of polyvinylidene fluoride. The resulting polymer network exhibits excellent shape‐memory properties with a storable strain of 200%, and fixity as well as recovery values of 100%. Programming upon rolling induces the transformation from the nonelectroactive α‐phase to the piezoelectric β‐phase. The highest β‐phase content is found to be 83% for a programming strain of 200% affording a d33 value of −30 pm V−1. This is in good accordance with literature known values for piezoelectric properties. Thermal triggering this material does not only result in a shape change but also renders the material nonelectroactive.
A rapid access to 2,2′‐bithiazole‐based copolymers has been developed on the basis of the sequential palladium‐catalyzed C H/C X and C H/C H coupling reactions. To assemble a “copolymer” through homopolymerization, a type of symmetric A‐B‐A‐type building block is designed as the monomer and prepared via the regioselective C5 H arylation of thiazole. A PdCl2/CuCl‐cocatalyzed oxidative C H/C H homopolymerization has been established to afford the 2,2′‐bithiazole‐based copolymers with high Mn (up to 69400). The current protocol features atom‐ and step‐economy and exhibits a potential in the highly efficient construction of conjugated copolymers.
In this work, a novel class of O2/N2 switchable polymers is reported, which is prepared by atom transfer radical copolymerization (ATRcoP) of commercially available 2,2,2‐trifluoroethyl methacrylate (FMA) and N,N‐dimethylaminoethyl methacrylate (DMA). The copolymer is random and contains 10 FMA units and 85 DMA units. Its aqueous solution becomes transparent with O2 bubbling and turns to turbid with N2 purging. This O2/N2‐responsive switchability between the transparent and turbid states is reversible. The FMA–DMA copolymer is thermosensitive and has a lower critical solution temperature (LCST) of 24.5 °C. O2 molecules interact with fluorinated groups of the copolymer and increase the LCST to 55 °C. Purging N2 removes O2 and returns the polymer thermosensitivity back to its initial state. The switchability occurs in the whole temperature range (24.5–55 °C).
The phase behavior of block copolymer based supramolecular complexes polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP) and amphiphilic pentadecylphenol (PDP) molecules resembles the phase behavior of conventional block copolymers. Several PS‐b‐P4VP(PDP) complexes are found to self‐assemble into gyroid nanostructures. Typically, the grains are randomly oriented with a maximal size of several micrometers. Here, the orientation of a gyroid PS‐b‐P4VP(PDP) complex upon shearing is reported. It is found that the (111) gyroid lattice direction orients parallel to the shear direction after only several seconds of large amplitude oscillatory shearing. Oriented gyroid complexes can be used as templates for the preparation of metal nanofoams with improved ordering with potentially superior properties.
A self‐healing hydrogel is prepared by crosslinking acrylamide with a host–guest macro‐crosslinker assembled from poly(β‐cyclodextrin) nanogel and azobenzeneacrylamide. The photoisomerizable azobenzene moiety can change its binding affinity with β‐cyclodextrin, therefore the crosslinking density and rheology property of the hydrogel can be tuned with light stimulus. The hydrogel can repair its wound autonomously through the dynamic host–guest interaction. In addition, the wounded hydrogel will lose its ability of self‐healing when exposed to ultraviolet light, and the self‐healing behavior can be recovered upon the irradiation of visible light. The utilizing of host–guest macro‐crosslinking approach manifests the as‐prepared hydrogel reversible and light‐switchable self‐healing property, which would broaden the potential applications of self‐healing polymers.
Orthogonal self‐assembly of multiple components represents an efficient strategy to afford hierarchical and multifunctional assemblies. Here, we demonstrate the orthogonal recognition behaviors between benzo‐21‐crown‐7/secondary ammonium salt and terpyridine/metal ions (Fe2+ or Zn2+) recognition motifs. Main‐chain supramolecular polymers are subsequently achieved via “one‐pot” mixing of the three monomers together (heteroditopic monomer 1 , homoditopic secondary ammonium salt monomer 2, and Fe(BF4)2•6H2O or Zn(OTf)2), which are confirmed by 1H NMR, UV–Vis, DOSY, and viscosity measurements. Moreover, different metal ions (Fe2+ or Zn2+) exert considerable effects on the size of the resulting supramolecular polymers. Integration of two different types of non‐covalent interactions renders dynamic and responsive properties for the resulting supramolecular polymers, as triggered by a variety of external stimuli such as temperature, potassium cation, as well as stronger chelating ligands. Therefore, the current work is a prerequisite for the future application of such orthogonal assemblies as intelligent supramolecular materials.
