Monolithic aerogels can be easily obtained by drying physical gels formed by linear uncross‐linked polymers. Preparation methods, structure, and properties of these physically cross‐linked polymeric aerogels are reviewed, with particular emphasis to those whose cross‐linking knots are crystallites and, more in particular, crystallites exhibiting nanoporous‐crystalline forms. The latter aerogels present beside disordered amorphous micropores (typical of all aerogels) also all identical nanopores of the crystalline phases. Their outstanding guest transport properties combined with low material cost, robustness, durability, and ease of handling and recycle make these aerogels suitable for applications in chemical separations, purification, and storage as well as in biomedicine. Scientific, technological, and industrial perspectives for monolithic nanoporous‐crystalline polymeric aerogels are also discussed.
Dynamic covalent hydrogels are facilely prepared from biocompatible polysaccharides in physiological conditions by the formation of phenylboronate ester cross‐links. This is based on the simple mixing of carboxylate‐containing polysaccharides (i.e., hyaluronic acid or carboxymethylcellulose) modified with phenylboronic acid and maltose moieties according to mild coupling reactions performed in aqueous solution. The formation of dynamic networks based on reversible boronic‐ester cross‐links is demonstrated by analyzing their rheological behavior. This study shows that these gels can adapt their structure in response to chemical stimuli such as variations in pH or addition of glucose and self‐heal.
The different mechanisms contributing to adhesion between two polymer surfaces are summarized and described in individual examples, which represent either seminal works in the field of adhesion science or novel approaches to achieve polymer–polymer adhesion. A further objective of this article is the development of new methodologies to achieve strong adhesion between low surface energy polymers.
Supramolecular polymer networks have attracted considerable attention not only due to their topological importance but also because they can show some fantastic properties such as stimuli‐responsiveness and self‐healing. Although various supramolecular networks are constructed by supramolecular chemists based on different non‐covalent interactions, supramolecular polymer networks based on multiple orthogonal interactions are still rare. Here, a supramolecular polymer network is presented on the basis of the host–guest interactions between dibenzo‐24‐crown‐8 (DB24C8) and dibenzylammonium salts (DBAS), the metal–ligand coordination interactions between terpyridine and Zn(OTf)2, and between 1,2,3‐triazole and PdCl2(PhCN)2. The topology of the networks can be easily tuned from monomer to main‐chain supramolecular polymer and then to the supramolecular networks. This process is well studied by various characterization methods such as 1H NMR, UV–vis, DOSY, viscosity, and rheological measurements. More importantly, a supramolecular gel is obtained at high concentrations of the supramolecular networks, which demonstrates both stimuli‐responsiveness and self‐healing properties.
A heterotritopic copillar[5]arene monomer by introducing effective neutral guest moieties (methylene chains end‐capped with cyano and triazole groups) to a pillar[5]arene macrocycle is prepared. This well‐designed AB2‐type copillar[5]arene contains strong host–guest recognition motifs that are connected with relatively flexible and long linkers, thus efficiently assembles to form supramolecular hyperbranched polymer (SHP) in chloroform solution, which is characterized by various techniques including 1H NMR, DOSY, viscosity, DLS, and TEM. Particularly, this supramolecular polymer can be effectively depolymerized by adding a competitive butanedinitrile guest.
Bilayer photomechanical films are fabricated by depositing one layer of molecular azobenzene chromophores onto flexible low‐density polyethylene substrates. The photoinduced bending and unbending behavior of five azobenzene derivatives including azobenzene, 4‐hydroxy‐azobenzene, 4‐((4‐hydroxyphenyl)diazenyl)bezoitrile, 4‐((4‐methoxyph‐enyl)diazenyl)phenol, and 4‐(phenyldiazenyl)phenol is systematically studied by considering the incident light intensity and the thickness of the coated chromophore layers. Precise control of photoinduced curling of the bilayer film is successfully achieved upon irradiation with two beams of UV light, and the curled films can be recovered by thermal relaxation in the dark. The easily fabricated bilayer films show fast photomechanical response, strong photoinduced stress, and stability similar to crosslinked polymeric films.
Herein, for rate‐tunable controlled release, the authors report a new facile method to prepare multiresponsive amphiphilic supramolecular diblock copolymers via the cooperative complexation between a water‐soluble pillar[10]arene and paraquat‐containing polymers in water. This supramolecular diblock copolymer can self‐assemble into multiresponsive polymeric micelles at room temperature in water. The resultant micelles can be further used in the controlled release of small molecules with tunable release rates depending on the type of single stimulus and the combination of various stimuli.
A simple and effective airflow method to prepare sandwich‐type block copolymer films is reported. The films are composed of three layers: vertically oriented nanocylinders align in both upper and bottom layers and irregular nanocylinders exist in the bulk of the film. The vertically oriented nanocylinders in both sides can provide high accessibility to ions and ensures the exchange of chemical species between the membrane and external environment, while the irregularly oriented nanocylinders in the middle part of the film can prolong the pathway of ions transportation and enhance ions selectivity.
A series of fluorene‐based conjugated polymers containing the aggregation‐induced emissive (AIE)‐active tetraphenylethene and dicarboxylate pseudocrown as a receptor exhibits a unique dual‐mode sensing ability for selective detection of lead ion in water. Fluorescence turn‐off and turn‐on detections are realized in 80%–90% and 20% water in tetrahydrofuran (THF), respectively, for lead ion with a concentration as low as 10−8 m .
New monolithic materials comprising zeolitic imidazolate framework (ZIF‐8) located on the pore surface of poly(glycidyl methacrylate‐co‐ethylene dimethacrylate) monolith previously functionalized with N‐(3‐aminopropyl)‐imidazole have been prepared via a layer‐by‐layer self‐assembly strategy. These new ZIF‐8@monolith hybrids are used as solid‐phase carriers for enzyme immobilization. Their performance is demonstrated with immobilization of a model proteolytic enzyme trypsin. The best of the conjugates enable very efficient digestion of proteins that can be achieved in mere 43 s.
A simple process is developed to fabricate metallo‐supramolecular nanogels (MSNs) by the metallo‐supramolecular‐coordinated interaction between histidine and iron‐meso‐tetraphenylporphin. MSNs are composed of histidine‐modified dextran (DH) and iron‐meso‐tetraphenylporphin (Fe–Por) and exhibit excellent biocompatibility and stability. MSNs show pH responsiveness in the intracellular mildly acidic environment, which has great potential for acid‐triggered drug release delivery. In vitro drug release profiles demonstrate that the pH‐dependent disassembly of MSNs to histidine and Por results in a quicker release rate of loaded‐DOX at pH 5.3, while at pH 7.4 MSNs could hinder the release of loaded‐DOX due to the enhanced stability of MSNs.
Pillararene‐containing thermoresponsive polymers are synthesized via reversible addition–fragmentation chain transfer polymerization using pillararene derivatives as the effective chain transfer agents for the first time. These polymers can self‐assemble into micelles and form vesicles after guest molecules are added. Furthermore, such functional polymers can be further applied to prepare hybrid gold nanoparticles, which integrate the thermoresponsivity of polymers and molecular recognition of pillararenes.
A new molecular recognition motif between a water soluble pillar[10]arene ( WP10 ) and 1,10‐phenanthrolinium guest ( G ) in water is established. Mainly driven by the cooperativity of multiple electrostatic interactions, hydrophobic interactions, and π–π stacking interactions between WP10 and G , this host–guest complex exhibits a high association constant in water, which is about 17 times higher than that between WP10 and paraquat ( PQ ). Furthermore, this size selective host–guest complexation is employed to tune the lower critical solution temperature behavior of a random copolymer with PQ derivative pendants.
The modulation of the cloud point of aqueous poly(N,N‐diethylacrylamide) solutions via the formation of supramolecular cyclodextrin complexes with hydrophobic end groups, namely adamantyl, tert‐butyl phenyl and azobenzene, synthesized via RAFT polymerization is described. The dependence of the apparent cloud points after cyclodextrin complexation is investigated with respect to the type and quantity of the guest end group, the polymer chain length and the cyclodextrin/end group ratio. Furthermore, the effect is reversed via the addition of guest molecules or via biocompatible enzymatic degradation of the cyclodextrins entire.
In this study, a new type of functional, self‐assembled nanostructure formed from porphyrins and polyamidoamine dendrimers based on hydrogen bonding in an aqueous solution is presented. As the aggregates formed are promising candidates for solar‐energy conversion, their photocatalytic activity is tested using the model reaction of methyl viologen reduction. The self‐assembled structures show significantly increased activity as compared to unassociated porphyrins. Details of interaction forces driving the supramolecular structure formation and regulating catalytic efficiency are fundamentally discussed.
A tubular highly porous scaffold of polylactide (PLA) and poly‐ε‐caprolactone (PCL) is fabricated by self‐rolling of a 2D fibrous bilayer of PLA and PCL in water without use of any classical thermo‐/pH‐responsive polymers. The self‐rolling and diameter of the tube are dependent upon the bilayer thickness and temperature. A 75 µm thick 2D bilayer (PLA = 25 µm; PCL = 50 µm) rolls to a hollow tube of diameter around 0.41 mm with multilayered wall at 40 °C within 5 min. The tubes keep their form and size in water at all temperatures once they are formed. The interesting properties of the hollow tubes, that is, permeation of gases through the walls and flow of water without leakage under tested conditions in combination with good mechanical stability, use of only biodegradable polymers, and easy and reproducible fabrication method, allow them to be promising candidates for future studies as scaffolds for tissue engineering.
Conjugated polymers may be induced by intra‐ and/or intermolecular non‐covalent forces to fold into helical conformations. Helices formed by aromatic amide, hydrazide, and urea polymers possess a well‐organized cavity and depth, which is defined by their degree of polymerization. Driving forces may be intramolecular hydrogen bonding and/or solvophobicity, or guest induction. The resulting long helices represent a new class of unimacromolecular dynamic tubular architectures that exhibit unique properties or functions in, for example, molecular recognition, chirality transfer, and ion transporting. The recent advances are highlighted here.
Epoxy polymers (EPs) derived from soybean oil with varied chemical structures are synthesized. These polymers are then cured with anhydrides to yield soybean‐oil‐derived epoxy thermosets. The curing kinetic, thermal, and mechanical properties are well characterized. Due to the high epoxide functionality per epoxy polymer chain, these thermosets exhibit tensile strength over an order of magnitude higher than a control formulation with epoxidized soybean oil. More importantly, thermosetting materials ranging from soft elastomers to tough thermosets can be obtained simply by using different EPs and/or by controlling feed ratios of EPs to anhydrides.
The host–guest complexation between a porphyrin‐based 3D tetragonal prism ( H ) and electron‐rich pyrene is investigated. This host–guest molecular recognition is further utilized to suppress the liquid‐crystalline behavior of a nematic molecule ( G ) containing cyanobiphenyl mesogens functionalized with a pyrenyl unit. Furthermore, coronene, with an increased number of π‐electrons, is used as a competitive guest to recover the liquid‐crystalline behavior of G . This supramolecular approach provides a glimpse of the new possibilities to modulate the structures of the mesophases.
In this paper, a novel synthesis of polyethylene glycol (PEG)‐modified polypyrrole (PPy) nanomaterials is demonstrated by combining reversible addition‐fragmentation chain transfer polymerization and oxidative polymerization. Dye molecules with a heat‐labile linker are used as a model drug and covalently anchored onto the PEGlated PPy nanomaterials via “click chemistry.” The strong absorption of such PPy nanomaterials in the near‐infrared region endows the system excellent photothermal effect, which can be used not only as efficient photothermal agents for photothermal therapy but also good controllers of a drug‐release system by retro D–A reaction.
