Polyurethane–oligo(phenylenevinylene) random copolymers: π‐Conjugated pores,vesicles, and nanospheres via solvent‐induced self‐organization

We report a new series of polyurethane–oligo(phenylenevinylene) (OPV) random copolymers and their self‐assembled nanomaterials such as pores, vesicles, and luminescent spheres. The polymers were synthesized through melt transurethane process by reacting a hydroxyl‐functionalized OPV with diurethane monomer and diol under solvent‐free and nonisocyanate conditions. The amount of OPV was varied up to 50 mol % in the feed to incorporate various amounts of π‐conjugated segments in the polyurethane backbone. The π‐conjugated segmented polymers were subjected to solvent induced self‐organization in THF or THF+water to produce variety of morphologies ranging from pores (500 nm to 1 μm) to spheres (100 nm to 2 μm). Upon shining 370‐nm light, the dark solid nanospheres of the copolymers transformed into blue luminescent nanoballs under fluorescence microscope. The mechanistic aspects of the self‐organization process were studied using solution FTIR and photophysical techniques such as absorption and emission to trace the factors which control the morphology. FTIR studies revealed that the hydrogen bonding plays a significant role in the copolymers with lower amount of OPV units. Time resolved fluorescent decay measurements of copolymers revealed that molecular aggregation via π‐conjugated segments play a major role in the samples with higher OPV content in the random block polymers. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 46: 5897–5915, 2008     

Polymeric Photoresist Nanoparticles: Light‐Induced Degradation of Hydrophobic Polymers in Aqueous Dispersion

Nanoparticles consisting of a photoreactive polymer able to radically switch its hydrophobicity are successfully prepared by miniemulsion polymerization. Irradiation with UV light causes degradation of the particles whereat complete dissolution is achieved by changing the initial hydrophobic photoresist polymer into hydrophilic poly(methacrylic acid). Incorporation of the fluorescence‐sensitive Nile red serves as a solvatochromic probe to study the particle degradation. Diffusion of either Nile red out from or water into the former hard spherical nanoparticles is studied and not only renders the described material an ideal system for applications, where in situ dissolution of nanoparticles may be needed, but also bears the additional advantage of performing controlled burst release.     

Environmentally Friendly Negative Resists Based on Acid‐Catalyzed Acetalization for 193‐nm Lithography

Novel water‐developable negative resists were designed to induce both crosslinking and polarity change upon exposure and bake. The matrix polymers were synthesized by copolymerization of glyceryl methacrylate and methacrolein. The acid‐catalyzed acetalization of the polymer induced crosslinking, polarity change, and an increase in dry‐etch resistance. The resist formulated with this polymer and cast in a water/ethanol mixture showed 0.7 μm line and space patterns using a mercury–xenon lamp in a contact printing mode and pure water as a developer.

The acid‐catalyzed acetalization of poly(GMA‐co‐MA) to form the water‐insoluble acetal.     

Light‐Triggered Multifunctionality at Surfaces Mediated by Photolabile Protecting Groups

Photoremovable protecting groups (PRPGs) are applied to organic surfaces, thin polymer films, and hydrogels to achieve light‐based remote control of their (bio)chemical and physical properties. These can be localized (i.e. patterned), tunable by exposure dose, and generated on‐demand. Using PRPGs with independent response to different wavelengths, multifunctional materials with a number of individually addressable functional states can be generated. Light‐triggered polymerization, crosslinking, and degradation processes as well as release of attached molecules can be realized. Light‐responsive surfaces and materials based on PRPGs open interesting possibilities for the next generation of instructive materials for cell culture and tissue regeneration.     

Polyurethanes Containing Indole‐Based Non‐Linear Optical Chromophores: from Linear Chromophore to H‐Type

Two new “H” type of indole‐based chromophores were designed and successfully introduced to the polymeric system, the resultant polymers demonstrated enhanced NLO effects, good processability, thermal stability and nearly excellent transparency, indicating the advantages of “H” type chromophore moieties. And they could be promising candidates for the practical applications as new photonic materials.

     

Initiated Chemical Vapor Deposition and Light‐Responsive Cross‐Linking of Poly(vinyl cinnamate) Thin Films

The first vapor‐phase deposition of poly(vinyl cinnamate) (PVCin) is reported. Initiated chemical vapor deposition (iCVD) is used to synthesize PVCin thin films with an average thickness of 100 nm. Free radical polymerization and cyclization reactions compete during the deposition process, with approximately 45% of the repeat units undergoing cyclization. Exposure to UV light (λ = 254 nm) induces dimerization (cross‐linking) of the PVCin, which is quantified using spectroscopic techniques. Approximately 90% of the free cinnamate moieties are dimerized at a UV dose of 300 mJ cm⁻². PVCin is also incorporated into a copolymer with N‐isopropylacrylamide, which exhibits a characteristic change in hydrophilicity with temperature. The copolymer is selectively cross‐linked through a mask, and reversible swelling of patterns with 30 μm resolution is demonstrated by submerging the film in water.

     

Synthesis of well‐defined and end‐polymerizable star‐shaped polysulfides and their application to negative photoresist

Various star‐shaped poly(phenoxy propylene sulfide)s (PPSs) bearing curable end groups were synthesized by the functionalization of the propagating ends of star‐shaped poly(PPS) with various electrophilies. The functionalization with chloromethyl styrene proceeded quantitatively, and afforded polymers with M_n almost agreed with theoretical value and narrow M_w/M_n. The photocuring conditions were optimized, and the addition of 10 wt % of poly(ethylene glycol) diacrylate was effective to attain sufficient crosslinking. The photocuring reaction of the end‐functionalized poly(PPS) films cast on silicon wafers was conducted by UV irradiation. The cured poly (PPS)s became insoluble in THF, supporting the sufficient crosslinking. Developing of a cured polymer yielded a negative photoresist pattern. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

A new design of cleavable acetal‐containing amphiphilic block copolymers triggered by light

We report a new design of photolabile acetal‐containing amphiphilic block copolymers. Acetals as protecting groups for carbonyls or diols can be hydrolyzed under acidic condition but very stable with respect to hydrolysis at pH > 7. When combining light‐capturing chromophores with acetals, the hydrolysis of acetals can be activated by light to design dual responsive acetal‐containing polymers. Using acetalization reaction of 2,3‐dihydroxypropyl methacrylate with benzaldehyde derivatives, two new acetal‐containing photolyzable monomers have been designed. Comparable to commonly used photolabile monomers containing nitrobenzyl esters, the two acetal‐containing monomers are easy to polymerize using atom transfer radical polymerization with excellent molecular weight and dispersity control. We studied the cleavage kinetics and mechanism of acetal groups in both monomers and polyethylene oxide (PEO)‐containing amphiphilic block copolymers using ¹H NMR and UV–vis spectroscopy. o‐Nitrobenzaldehyde acetal showed a Norrish Type II rearrangement to form benzoic ester; while, 2,5‐dimethoxy benzaldehyde acetal was photolabile to completely release 2,3‐dihydroxypropyl methacrylate. The photocleavage of acetals is a zero‐order reaction in regardless of molecular states of acetals; while, the acid‐cleavage of acetals proves to be a first‐order kinetics and the cleavage becomes much slower for polymers. The self‐assembly of acetal‐containing amphiphilic block copolymers and the acid‐/light‐controlled dissociation of their vesicles have been investigated. We demonstrate that those acetal‐containing polymers are potentially useful as smart drug delivery systems where the release kinetics of payloads is tunable using light and pH as triggers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1815–1824     

Pi‐conjugated chain extenders for the synthesis of optoelectronic segmented polyurethanes

The optical properties of mechanochromic materials change under mechanical stress. Segmented polyurethanes are elastomers composed of amorphous, saturated chain soft segments, and rigid pi‐conjugated hard domains. Within aggregates of hard domains pi–pi interactions may form and result in perturbation of the optoelectronic properties of the system. Disruption and restoration of these electronic interactions within the material may lead to observable mechanochromic response. A series of oligothiophene diols and diamines, as well as a naphthalene diimide diol, have been synthesized for incorporation into the hard domains of segmented polyurethanes and polyureas using long poly(tetramethylene oxide) chains as soft segments. The resulting polymers were evaluated to determine their extent of polymerization and their thermal stability. The optical properties of the materials were studied in solution and as thin films. Where possible the electrochemical properties of the polymers were also explored. The length of the soft segment chains in the segmented polyurethanes hindered electronic coupling of hard domains. Future work involving smaller, more solubilizing soft segments may allow for easier material characterization and mechanochromic response. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Light‐triggered antifouling coatings for porous silicon optical transducers

Nanostructured porous silicon (PSi) is an attractive platform for the design of biosensors because of its high sensitivity and selectivity towards various biological targets. Its use for biosensing applications, however, is compromised as a result of interfacial interactions with biological molecules that may accumulate on their surfaces and degrade their performance. We describe a new hybrid system comprising an oxidized PSi (PSiO₂) nanostructure and antifouling (anti‐adsorption), light‐triggered pre‐polymers that promote crosslinking and surface anchoring to Si walls. The incorporation of the pre‐polymers allowed the production of a thick hydrogel layer on the inorganic nanostructure. Coating completely prevents fouling of proteins on the surface without compromising biosensor performance in terms of sensitivity. The strategy developed here provides a convenient means to combine two distinct features of crosslinking and organic–inorganic hybrid fabrication in a “one‐pot” process. Copyright © 2017 John Wiley & Sons, Ltd.     

High‐performance holographic polymer‐dispersed liquid crystals by incorporating hyperbranched polymers

A minute amount (0.01–0.3 wt %) of ally isocyanate functionalized hyperbranched 2,2‐bis (hydroxymethyl) propionic acid (bis‐MPA) polyester‐16‐hydroxyl (HBP) was incorporated covalently into polyurethane acrylate‐based holographic polymer dispersed liquid crystals (HPDLCs), and its effects on the compound viscosity, grating kinetics, morphology, diffraction efficiency (DE), and electro‐optical properties of the HPDLC films were examined. HBP at low concentrations (0.01–0.05%) reduced the compound viscosity and domain size of liquid crystal (LC) significantly and augmented the cure rate and saturation DE by up to threefold compared to the HBP‐free compound. At high concentrations (0.10 and 0.30%), HBP increased the compound viscosity and decreased the rate of grating formation, giving rise to distorted LC‐polymer interfaces, which caused a significant decrease in the threshold and operating voltages. The rise and decay time showed a minimum and maximum, respectively, when the compound viscosity was a minimum at 0.03% HBP. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Novel thermotropic liquid crystalline‐cum‐photocrosslinkable polyvanillylidene alkyl/arylphosphate esters

A new class of linear unsaturated polyphosphate esters based on divanillylidene cyclohexanone possessing liquid crystalline‐cum‐photocrosslinkable properties have been synthesized from 2,6‐bis[n‐hydroxyalkyloxy(vanillylidene)]cyclohexanone [n = 6,8,10] with various alkyl/aryl phosphorodichloridates in chloroform at ambient temperature. The resultant polymers were characterized by intrinsic viscosity, FT‐IR, ¹H, ¹³C, and ³¹P‐NMR spectroscopy. All the polymers showed anisotropic behavior under hot stage optical polarized microscope (HOPM). The liquid crystalline textures of the polymers became more transparent with increasing spacer length. The thermal behavior of the polymers was studied by thermogravimetric analysis and differential scanning calorimetry. The T_g, T_m, and T_i of the polymers decreased with increasing flexible methylene chain. The photocrosslinking property of the polymer was investigated by UV light/UV spectroscopy; the crosslinking proceeds via 2π‐2π cycloaddition reactions of the divanillylidene exocyclic double bond of the polymer backbone. The pendant alkyloxy containing polymers show faster crosslinking than the pendant phenyloxy containing polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5215–5226, 2004     

Photoreversible Supramolecular Polymerisation and Hierarchical Organization of Hydrogen‐Bonded Supramolecular Co‐polymers Composed of Diarylethenes and Oligothiophenes

Diarylethene 1 equipped with two monotopic melamine hydrogen‐bonding sites and oligothiophene‐functionalized ditopic cyanurate (OTCA) were mixed in a nonpolar solvent to form AA‐BB‐type supramolecular co‐polymers (SCPs) bearing photoswitchable moieties in their main chains and extended π systems as side chains. UV/Vis, fluorescence, dynamic light scattering (DLS), TEM, and AFM studies revealed that the two functional co‐monomers formed flexible quasi‐one‐dimensional SCPs in solution that hierarchically self‐organized into helical nanofibers through H‐aggregation of the oligothiophene side chains. Upon irradiating the SCPs with UV light, a transition occurred from the H‐aggregated state to non‐aggregated monomeric oligothiophene side chains, as shown by spectroscopic studies, which indicates the formation of small oligomeric species held together only by hydrogen‐bonding interactions. TEM and AFM visualized unfolded fibrils corresponding to elongated single SCP chains formed upon removal of solvent. The helical nanofibers were regenerated upon irradiating the UVirradiated solution with visible light. These results demonstrated that the supramolecular polymerisation followed by hierarchical organization can be effectively controlled by proper supramolecular designs using diarylethenes and π‐conjugated oligomers.     

Water‐Developable Poly(2‐oxazoline)‐Based Negative Photoresists

Copoly(2‐oxazoline)‐based photoresists are prepared from pEtOx₈₀Bu⁼Ox₂₀ and pPhOx₈₀Dc⁼Ox₂₀ , respectively, a tetrathiol, and a photosensitive initiator. It is possible to prepare copoly(2‐oxazoline)s bearing unsaturated side chains in a microwave reactor on a decagram scale in reaction times of 100 min or shorter. UV irradiation of dried polymer films through a quartz mask induces the thiol‐ene reaction in the illuminated areas. Subsequent development of the polymer films in halogen‐free solvents reproduces the negative pattern of the mask with a resolution of 2 μm. The pEtOx₈₀Bu⁼Ox₂₀ ‐derived photoresists can also be developed in water.     

Synthesis of novel moisture‐curable polyurethanes end‐capped with trialkoxysilane and their application to one‐component adhesives

Novel silane endcappers and novel polyurethanes end‐capped with trimethoxysilane (silylated polyurethanes) were developed as water‐curable materials in which the curing reaction occurred under humid conditions in the presence of dioctyltin diversatate as a curing catalyst. A variety of amine‐terminated trimethoxysilane compounds were synthesized by the Michael addition reaction of commercially available 3‐aminopropyltrimethoxysilane with acrylates, and the resulting silane endcappers were used to react with isocyanate‐terminated polyurethanes, providing the silylated polyurethanes. The moisture‐curable silylated polyurethanes were used for the preparation of novel one‐component and solvent‐free adhesives. The evaluated properties were the curing speed, the tensile shear bond strength, and the adherence to some substrates. The longer alkyl chains of the silane endcappers derived from various acrylates led to a slower curing speed, lower tensile strength at break, and longer elongation at break of the silylated polyurethanes. The tensile shear bond strength of the silylated polyurethane‐based adhesive decreased with decreasing the trimethoxysilane end‐capping ratio, whereas an increase in the adherence was observed. The adherence to the acrylic substrate was improved by changes in the main‐chain structure of the polyurethane based on the composition of poly(propylene oxide) and poly(ethylene oxide). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2689–2704, 2007     

Polyurethane‐nanocomposite materials via in situ polymerization into organoclay interlayers

New nanocomposite materials based on polyurethane intercalated into organoclay layers have been synthesized via in situ polymerization. The syntheses of polyurethane–organoclay hybrid films were carried out by swelling the organoclay [12‐aminododecanoic acid montmorillonite] into different kinds of diols followed by addition of diisocyanate then casting in a film. The homogeneous dispersion of MMT in the polymer matrix is evidenced by scanning electron microscope and x‐ray diffraction, which showed the disappearance of the peak characteristic to d₀₀₁ spacing. It was found that the presence of organoclay has improved the thermal, solvent resistance and mechanical properties. Also, the tensile strength is increased with increasing the organoclay contents to 20% by the ratio 182% related to the PU with 0% organoclay. On the contrary, the elongation has decreased with increasing the organoclay contents. Copyright © 2007 John Wiley & Sons, Ltd.     

New Positive‐Type Photoresists Based on Enzymatically Synthesized Polyphenols

Summary: New positive‐type photoresist systems based on enzymatically synthesized polyphenols have been developed. The photoresist thin film consisting of the polyphenol and a diazonaphthoquinone derivative was prepared on copperfoil‐coated epoxy resins and exposed to UV light with different doses. The polyphenols from the bisphenol monomers exhibited high photosensitivity, comparable with a conventional cresol novolac. The sensitivity could be controlled by changing the structure of the polyphenols. Furthermore, the present photoresist showed excellent etching resistance.

Characteristic exposure curves of poly( 1 )/DNQ and poly( 5 )/DNQ (both 70:30 wt.‐%) with different phenylene unit contents.