Effect of Isomeric Structures on Photovoltaic Performance of D–A Copolymers

Two donor–acceptor copolymers based on isomeric acceptor units, [7,7′‐bithieno[2′,3′:4,5]thieno[2,3‐d ]thieno[3,2‐b ]pyridine]‐5,5′(4H ,4′H )‐dione (BTTP) and [2,2′‐bithieno[2′,3′:4,5]thieno[2,3‐d ]thieno[3,2‐b ]pyridine]‐5,5′(4H ,4′H )‐dione (iBTTP), are developed to study the effect of isomeric structures on photovoltaic performance. Compared with PBDTBTTP, PBDTiBTTP possesses a smaller bandgap for good light harvesting and a better π–π stacking for higher hole mobility. PBDTiBTTP solar cells present balanced mobilities and good nanoscale phase separation, giving a power conversion efficiency (PCE) of 6.51%, with higher short‐circuit current (J _sc) and fill factor (FF).

     

Beyond Donor–Acceptor (D–A) Approach: Structure–Optoelectronic Properties—Organic Photovoltaic Performance Correlation in New D–A1–D–A2 Low‐Bandgap Conjugated Polymers

Low‐bandgap near‐infrared polymers are usually synthesized using the common donor–acceptor (D–A) approach. However, recently polymer chemists are introducing more complex chemical concepts for better fine tuning of their optoelectronic properties. Usually these studies are limited to one or two polymer examples in each case study so far, though. In this study, the dependence of optoelectronic and macroscopic (device performance) properties in a series of six new D–A₁–D–A₂ low bandgap semiconducting polymers is reported for the first time. Correlation between the chemical structure of single‐component polymer films and their optoelectronic properties has been achieved in terms of absorption maxima, optical bandgap, ionization potential, and electron affinity. Preliminary organic photovoltaic results based on blends of the D–A₁–D–A₂ polymers as the electron donor mixed with the fullerene derivative [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester demonstrate power conversion efficiencies close to 4% with short‐circuit current densities (J _sc) of around 11 mA cm⁻², high fill factors up to 0.70, and high open‐circuit voltages (V _ocs) of 0.70 V. All the devices are fabricated in an inverted architecture with the photoactive layer processed in air with doctor blade technique, showing the compatibility with roll‐to‐roll large‐scale manufacturing processes.

     

Silaindacenodithiophene‐Based Fused‐Ring Non‐Fullerene Electron Acceptor for Efficient Polymer Solar Cells

In this work, a new A‐D‐A type nonfullerene small molecular acceptor SiIDT‐IC, with a fused‐ring silaindacenodithiophene (SiIDT) as D unit and 2‐(3‐oxo‐2,3‐dihydroinden‐1‐ylidene)malononitrile (INCN) as the end A unit, was design and synthesized. The SiIDT‐IC film shows absorption peak and edge at 695 and 733 nm, respectively. The HOMO and LUMO of SiIDT‐IC are of −5.47 and −3.78 eV, respectively. Compared with carbon‐bridging, the Si‐bridging can result in an upper‐lying LUMO level of an acceptor, which is benefit to achieve a higher open‐circuit voltage in polymer solar cells (PSCs). Complementary absorption and suitable energy level alignment between SiIDT‐IC and wide bandgap polymer donor PBDB‐T were found. For the PBDB‐T:SiIDT‐IC based inverted PSCs, a D/A ratio of 1: 1 was optimal to achieve a power conversion efficiency (PCE) of 7.27%. With thermal annealing (TA) of the blend film, a higher PCE of 8.16% could be realized due to increasing of both short‐circuit current density and fill factor. After the TA treatment, hole and electron mobilities were elevated to 3.42 × 10⁻⁴ and 1.02 × 10⁻⁴ cm²·V⁻¹·s⁻¹, respectively. The results suggest that the SiIDT, a Si‐bridged fused ring, is a valuable D unit to construct efficient nonfullerene acceptors for PSCs.     

Broad Bandgap D–A Copolymer Based on Bithiazole Acceptor Unit for Application in High‐Performance Polymer Solar Cells with Lower Fullerene Content

A new broad bandgap and 2D‐conjugated D‐A copolymer, PBDTBTz‐T , based on bithienyl‐benzodithiophene donor unit and bithiazole (BTz) acceptor unit, is designed and synthesized for the application as donor material in polymer solar cells (PSCs). The polymer possesses highly coplanar and crystalline structure with a higher hole mobility and lower HOMO energy level which is beneficial to achieve higher open circuit voltage (V_oc) of the PSCs with the polymer as donor. The PSCs based on PBDTBTz‐T :PC₇₁BM blend film with a lower PC₇₁BM content of 40% demonstrate a power conversion efficiency (PCE) of 6.09% with a relatively higher V_oc of 0.92 V. These results indicate that the lower HOMO energy level of the BTz‐based D–A copolymer is beneficial to a high V_oc of the PSCs. The polymer, with highly coplanar and crystalline structure, can effectively reduce the content of fullerene acceptor in the active layer and can enhance the absorption and PCE of the PSCs.

     

Electronic Properties and Field‐Effect Transistors of Thiophene‐Based Donor–Acceptor Conjugated Copolymers

Summary: The thiophene‐quinoxaline donor–acceptor conjugated copolymer poly[(thiophene‐2,5‐diyl‐alt‐(2,3‐diheptylquinoxaline‐5,8‐diyl)] (PTHQx) was explored as a semiconductor in thin‐film organic field‐effect transistors (OFETs). A hole mobility of 3.6 × 10⁻³ cm² · V⁻¹ · s⁻¹ and an on/off current ratio of 6 × 10⁵ were observed in p‐channel OFETs made from spin‐coated PTHQx thin films. The electronic structures of PTHQx and a related thiophene‐thienopyrazine donor–acceptor copolymer were calculated by density functional theory. Atomic force microscopy of PTHQx thin films showed a polycrystalline grain morphology that varied with the substrate.

Output (left) and transfer (right) characteristics of a PTHQx (structure shown) organic field‐effect transistor.     

Donor–Acceptor Oligoimides for Application in High‐Performance Electrical Memory Devices

Two new oligoimides, OI(APAP-6FDA) and OI(APAN-6FDA) , which consisted of electron‐donating N‐(4‐aminophenyl)‐N‐phenyl‐1‐aminopyrene ( APAP ) or N‐(4‐aminophenyl)‐N‐phenyl‐1‐aminonaphthalene ( APAN ) moieties and electron‐accepting 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride ( 6FDA ) moieties, were designed and synthesized for application in electrical memory devices. Such devices, with the indium tin oxide (ITO)/oligoimide/Al configuration, showed memory characteristics, from high‐conductance Ohmic current flow to negative differential resistance (NDR), with corresponding film thicknesses of 38 and 48 nm, respectively. The 48 nm oligoimide film device exhibited NDR electrical behavior, which resulted from the diffusion of Al atoms into the oligoimide layer. On further increasing the film thickness to 85 nm, the OI(APAP-6FDA) film device showed a reproducible nonvolatile “write once read many” (WORM) property with a high ON/OFF current ratio (more than ×10⁴). On the other hand, the device that was based on the 85 nm OI(APAN-6FDA) film exhibited a volatile static random access memory (SRAM) property. The longer conjugation length of the pyrene unit compared to that of a naphthalene unit was considered to be responsible for the different memory characteristics between these two oligoimides. These experimental results suggested that tunable switching behavior could be achieved through an appropriate design of the donor–acceptor oligoimide structure and controllable thickness of the active memory layer.     

Tuning the Donor–Acceptor Strength of Low‐Bandgap Platinum‐Acetylide Polymers for Near‐Infrared Photovoltaic Applications

Two near‐infrared (NIR) absorbing metallopolyynes of platinum ( P1 and P2 ) functionalized with a weakly electron‐donating fluorene unit and two strong electron acceptors (viz. benzo[1,2‐c:4,5‐c′]bis([1,2,5]thiadiazole) and [1,2,5]thiadiazolo[3,4‐i ]dibenzo[a,c]phenazine) were synthesized and applied for NIR photovoltaic applications. With these designed weak donor–strong acceptor electronic traits, these metallopolymers possess narrow bandgaps of 1.54 and 1.65 eV and a low HOMO level of about 5.50 eV, thus inducing a power conversion efficiency up to 1% for bulk heterojunction solar cells at the NIR wavelength.

     

Incorporation of Hexa‐peri‐hexabenzocoronene (HBC) into Carbazole–Benzo‐2,1,3‐thiadiazole Copolymers to Improve Hole Mobility and Photovoltaic Performance

Hexa‐peri‐hexabenzocoronene (HBC) is a discotic‐shaped conjugated molecule with strong π–π stacking property, high intrinsic charge mobility, and good self‐assembly properties. For a long time, however, organic photovoltaic (OPV) solar cells based on HBC demonstrated low power conversion efficiencies (PCEs). In this study, two conjugated terpolymers, poly[N‐9′‐heptadecanyl‐2,7‐carbazole‐alt‐5,5′‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)] (PCDTBT)‐ 5 HBC and PCDTBT‐ 10 HBC, were synthesized by incorporating different amounts of HBC as the third component into poly[N‐9′‐heptadecanyl‐2,7‐carbazole‐alt‐5,5′‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)] (PCDTBT) through Suzuki coupling polymerization. For comparison, the donor–acceptor (D –A) conjugated dipolymer PCDTBT was also synthesized to investigate the effect of HBC units on conjugated polymers. The HBC‐containing polymers exhibited higher thermal stabilities, broader absorption spectra, and lower highest‐occupied molecular orbital (HOMO) energy levels. In particular, the field‐effect mobilities were enhanced by more than one order of magnitude after the incorporation of HBC into the conjugated polymer backbone on account of increased interchain π–π stacking interactions. The bulk heterojunction (BHJ) polymer solar cells (PSCs) fabricated with the polymers as donor and PC₇₁BM as acceptor demonstrated gradual improvement of open‐circuit voltage (V_OC) and short‐circuit current (J_SC) with the increase in HBC content. As a result, the PCEs were improved from 3.21 % for PCDTBT to 3.78 % for PCDTBT‐ 5 HBC and then to 4.20 % for PCDTBT‐ 10 HBC.     

Conjugated Donor‐Acceptor‐Acceptor (D‐A‐A) Molecule for Organic Nonvolatile Resistor Memory

A new donor‐acceptor‐acceptor (D‐A‐A) type of conjugated molecule, N‐(4‐(N′,N′‐diphenyl)phenylamine)‐4‐(4′‐(2,2‐dicyanovinyl)phenyl) naphthalene‐1,8‐dicarboxylic monoimide ( TPA‐NI‐DCN ), consisting of triphenylamine (TPA) donors and naphthalimide (NI)/dicyanovinylene (DCN) acceptors was synthesized and characterized. In conjunction with previously reported D ‐A based materials, the additional DCN moiety attached as end group in the D‐A‐A configuration can result in a stable charge transfer (CT) and charge‐separated state to maintain the ON state current. The vacuum‐deposited TPA‐NI‐DCN device fabricated as an active memory layer was demonstrated to exhibit write‐once‐read‐many (WORM) switching characteristics of organic nonvolatile memory due to the strong polarity of the TPA‐NI‐DCN moiety.     

Evidence for the Chain‐Growth Synthesis of Statistical π‐Conjugated Donor–Acceptor Copolymers

The synthesis of a series of dithienosilole–benzotriazole donor–acceptor statistical copolymers with various donor–acceptor ratios is reported, prepared by Kumada catalyst‐transfer polymerization. Statistical copolymer structure is verified by ¹H NMR and optical absorption spectroscopy, and supported by density functional theory (DFT) calculations. The copolymers exhibit a single optical absorption band that lies between dithienosilole and benzotriazole homopolymers, which shifts with varying donor–acceptor content. A chain extension experiment using a partially consumed benzotriazole solution as a macroinitiator followed by addition of dithienosilole leads to the synthesis of a statistical dithienosilole–benzotriazole block copolymer from a pure benzotriazole block, demonstrating that both chain extension and simultaneous monomer incorporation are possible using this methodology.

     

A Pentacyclic Nitrogen‐Bridged Thienyl–Phenylene–Thienyl Arene for Donor–Acceptor Copolymers: Synthesis,Characterization, and Applications in Field‐Effect Transistors and Polymer Solar Cells

A pentacyclic benzodipyrrolothiophene ( BDPT ) unit, in which two outer thiophene rings are covalently fastened with the central phenylene ring by nitrogen bridges, was synthesized. The two pyrrole units embedded in BDPT were constructed by using one‐pot palladium‐catalyzed amination. The coplanar stannylated Sn‐BDPT building block was copolymerized with electron‐deficient thieno[3,4‐c]pyrrole‐4,6‐dione ( TPD ), benzothiadiazole ( BT ), and dithienyl‐diketopyrrolopyrrole ( DPP ) acceptors by Stille polymerization. The bridging nitrogen atoms make the BDPT motif highly electron‐abundant and structurally coplanar, which allows for tailoring the optical and electronic properties of the resultant polymers. Strong photoinduced charge‐transfer with significant band‐broadening in the solid state and relatively higher oxidation potential are characteristic of the BDPT‐based polymers. Poly(benzodipyrrolothiophene‐alt‐benzothiadiazole) ( PBDPTBT ) achieved the highest field‐effect hole mobility of up to 0.02 cm² V^?1 s^?1. The photovoltaic device using the PBDPTBT /PC₇₁BM blend (1:3, w/w) exhibited a V_oc of 0.6 V, a J_sc of 10.34 mA cm^?2, and a FF of 50 %, leading to a decent PCE of 3.08 %. Encouragingly, the device incorporating poly(benzodipyrrolothiophene‐alt‐thienopyrrolodione) ( PBDPTTPD )/PC₇₁BM (1:3, w/w) composite delivered a highest PCE of 3.72 %. The enhanced performance arises from the lower‐lying HOMO value of PBDPTTPD to yield a higher V_oc of 0.72 V.     

An A‐D‐A′‐D‐A Conjugated Molecule Entailing Diazapentalene Unit for an n‐Type Organic Semiconductor

Conjugated molecules with low lying LUMO levels are demanding for the development of air stable n‐type organic semiconductors. In this paper, we report a new A‐D‐A′‐D‐A conjugated molecule ( DAPDCV ) entailing diazapentalene (DAP) and dicyanovinylene groups as electron accepting units. Both theoretical and electrochemical studies manifest that the incorporation of DAP unit in the conjugated molecule can effectively lower the LUMO energy level. Accordingly, thin film of DAPDCV shows n‐type semiconducting behavior with electron mobility up to 0.16 cm²?V^?1?s^?1 after thermal annealing under N₂ atmosphere. Moreover, thin film of DAPDCV also shows stable n‐type transporting property in air with mobility reaching 0.078 cm²?V^?1?s^?1.     

Ring Opening of Donor–Acceptor Cyclopropanes with the Azide Ion: A Tool for Construction of N‐Heterocycles

A general method for ring opening of various donor–acceptor cyclopropanes with the azide ion through an S_N2‐like reaction has been developed. This highly regioselective and stereospecific process proceeds through nucleophilic attack on the more‐substituted C2 atom of a cyclopropane with complete inversion of configuration at this center. Results of DFT calculations support the S_N2 mechanism and demonstrate good qualitative correlation between the relative experimental reactivity of cyclopropanes and the calculated energy barriers. The reaction provides a straightforward approach to a variety of polyfunctional azides in up to 91 % yield. The high synthetic utility of these azides and the possibilities of their involvement in diversity‐oriented synthesis were demonstrated by the developed multipath strategy of their transformations into five‐, six‐, and seven‐membered N‐heterocycles, as well as complex annulated compounds, including natural products and medicines such as (?)‐nicotine and atorvastatin.     

Polypropylene Copolymers Designed for Fused Filament Fabrication 3D‐Printing

Several chemical properties which influence the printability for fused filament fabrication 3D‐printing are derived from analyses of commercially available filaments. In preliminary experiments, polymerization conditions are optimized and suitable monomers and selectivity control agents (donors) are selected. An experimental series in which propene is copolymerized with the comonomers 1‐butene and 1‐hexene with an industrial Ziegler–Natta catalyst will be discussed here. The experiments are planned using design of experiments. Based on a split‐plot design, the design is adapted for mixtures and the combination of homo‐ and copolymerization. The observed factors, besides the mixture composition, are hydrogen partial pressure and the amount of donor. The obtained polymers are analyzed by means of high‐temperature size exclusion chromatography, differential scanning calorimetry, and rheology. 1‐Butene copolymers show good printing results and promising properties almost matching the desired ones. The targeted polymer properties are achieved within certain limits. 1‐Hexene copolymers result in lower molecular masses while crystallinity remains slightly higher, which does not match with the desired profile. Beneficial properties are likely to be achieved within a wider factor range, for example, higher comonomer amount and lower hydrogen partial pressure.     

All‐Fullerene Electron Donor–Acceptor Conjugates

The synthesis and characterization of a covalent all‐fullerene C₆₀‐Lu₃N@I_h‐C₈₀ electron donor–acceptor conjugate has been realized by sequential 1,3‐dipolar cycloaddition reactions of azomethine ylides on Lu₃N@I_h‐C₈₀ and C₆₀. To the best of our knowledge, this is the first time that two fullerenes behaving as both electron donor (Lu₃N@I_h‐C₈₀) and acceptor (C₆₀) are forming an electroactive dumbbell. DFT calculations reveal up to 16 diastereomeric pairs, that is, 8 with syn and 8 with anti orientation, with the anti‐RSSS isomer being the most stable. Spectroelectrochemical absorption and femtosecond transient absorption experiments support the notion that a C₆₀^??‐Lu₃N@I_h‐C₈₀^?+ charge‐separated state is formed. Spin conversion from the charge‐separated singlet state C₆₀^??‐Lu₃N@I_h‐C₈₀^?+ into the corresponding triplet state is facilitated by the heavy‐atom effect stemming from the Lu₃N‐cluster, which, in turn, slows down the charge recombination by one order of magnitude.     

Structure–Property Relationships in Click‐Derived Donor–Triazole–Acceptor Materials

To shed light on intramolecular charge‐transfer phenomena in 1,2,3‐triazole‐linked materials, a series of 1,2,3‐triazole‐linked push–pull chromophores were prepared and studied experimentally and computationally. Investigated modifications include variation of donor and/or acceptor strength and linker moiety as well as regioisomers. Photophysical characterization of intramolecular charge‐transfer features revealed ambipolar behavior of the triazole linker, depending on the substitution position. Furthermore, non‐centrosymmetric materials were subjected to second‐harmonic generation measurements, which revealed the high nonlinear optical activity of this class of materials.     

Donor–Acceptor (D–A)‐Substituted Polyyne Chromophores: Modulation of Their Optoelectronic Properties by Varying the Length of the Acetylene Spacer

A series of donor–acceptor‐substituted alkynes, 2 a – f , was synthesized in which the length of the π‐conjugated polyyne spacer between the N,N‐diisopropylanilino donor and the 1,1,4,4‐tetracyanobuta‐1,3‐diene (TCBD) acceptor was systematically changed. The effect of this structural change on the optoelectronic properties of the molecules and, ultimately, their third‐order optical nonlinearity was comprehensively investigated. The branched N,N‐diisopropyl groups on the anilino donor moieties combined with the nonplanar geometry of 2 a – f imparted exceptionally high solubility to these chromophores. This important property allowed for performing INADEQUATE NMR measurements without ¹³C labeling, which, in turn, resulted in a complete assignment of the carbon skeleton in chromophores 2 a – f and the determination of the ¹³C–¹³C coupling constants. This body of data provided unprecedented insight into characteristic ¹³C chemical shift patterns in push–pull‐substituted polyynes. Electrochemical and UV/Vis spectroscopic studies showed that the HOMO–LUMO energy gap decreases with increasing length of the polyyne spacer, while this effect levels off for spacers with more than four acetylene units. The third‐order optical nonlinearity of this series of molecules was determined by measuring the rotational averages of the third‐order polarizabilities (γ_rot) by degenerate four‐wave mixing (DFWM). These latter studies revealed high third‐order optical nonlinearities for the new chromophores; most importantly, they provided fundamental insight into the effect of the conjugated spacer length in D–A polyynes, that can be exploited in the future design of suitable charge‐transfer chromophores for applications in optoelectronic devices.     

New Dual Donor–Acceptor (2D‐π‐2A) Porphyrin Sensitizers for Stable and Cost‐Effective Dye‐Sensitized Solar Cells

A series of porphyrin sensitizers that featured two electron‐donating groups and dual anchoring groups that were connected through a porphine π‐bridging unit have been synthesized and successfully applied in dye‐sensitized solar cells (DSSCs). The presence of electron‐donating groups had a significant influence on their spectroscopic, electrochemical, and photovoltaic properties. Overall, the dual anchoring groups gave tunable electronic properties and stronger attachment to TiO₂. These new dyes were readily synthesized in a minimum number of steps in gram‐scale quantities. Optical and electrochemical data confirmed the advantages of these dyes for use as sensitizers in DSSCs. Porphyrins with electron‐donating amino moieties provided improved charge separation and better charge‐injection efficiencies for the studied dual‐push–pull dyes. Attenuated total reflectance–Fourier‐transform infrared (ATR‐FTIR) and X‐ray photoelectron spectroscopy of the porphyrin dyes on TiO₂ suggest that both p‐carboxyphenyl groups are attached onto TiO₂, thereby resulting in strong attachment. Among these dyes, cis-Zn2BC2A , with two electron‐donating 3,6‐ditertbutyl‐phenyl‐carbazole groups and dual‐anchoring p‐carboxyphenyl groups, showed the highest efficiency of 4.07 %, with J_SC=9.81 mA cm^?2, V_OC=0.63 V, and FF=66 %. Our results also indicated a better photostability of the studied dual‐anchored sensitizers compared to their mono‐anchored analogues under identical conditions. These results provide insight into the developments of a new generation of high‐efficiency and thermally stable porphyrin sensitizers.