Design and synthesis of iridium bis(carbene) complexes for efficient blue electrophosphorescence

Five iridium bis(carbene) complexes, [Ir(pmi)(2)(pypz)] (1), [Ir(mpmi)(2)(pypz)] (2), [Ir(fpmi)(2)(pypz)] (3), [Ir(fpmi)(2)(pyim)] (4), and [Ir(fpmi)(2)(tfpypz)] (5) (pmi=1-phenyl-3-methylimdazolin-2-ylidene-C,C(2'); fpmi=1-(4-fluorophenyl)-3-methylimdazolin-2-ylidene-C,C(2'); mpmi=1-(4-methyl-phenyl)-3-methylimdazolin-2-ylidene-C,C(2'); pypz=2-(1H-pyrazol-5-yl)pyridinato; pyim=2-(1H-imidazol-2-yl)pyridinato; and tfpypz=2-(3-(trifluoromethyl)-1H-pyrazol-5-yl)pyridinato), were synthesized and their structures were characterized by NMR spectroscopy, mass spectroscopy and X-ray diffraction. These complexes showed phosphorescent emission with the emission maxima between 453 and 490 nm. Various spectrophotometric measurements, cyclic voltammetric studies, and density functional theory (DFT) calculations show that, unlike most of the phosphorescent cyclometalated iridium complexes, the lowest unoccupied molecular orbital (LUMO) energy and the emissive state of these iridium complexes are mainly controlled by the N,N'-heteroaromatic (N^N) ligand. Despite the fact that the LUMO levels of these complexes are mainly on the N^N ligands, the efficiencies of the electroluminescent (EL) devices are very high. For example, the EL devices using [Ir(mpmi)(2)(pypz)], [Ir(fpmi)(2)(pypz)], and [Ir(fpmi)(2)(tfpypz)] as the dopant emitters exhibited light- to deep-blue electrophosphorescence with external quantum efficiencies of 15.2, 14.1, and 7.6% and Commission Internationale d'énclairage (x,y) coordinates (CIE(x,y)) of (0.14, 0.27), (0.14, 0.18) and (0.14, 0.10), respectively.     

High efficiency mer-iridium complexes for organic light-emitting diodes

We have developed a new process at high vacuum (5 x 10(-5) Torr) and high temperature (300 degrees C) to produce meridional iridium complexes from the dimer; interestingly, mer-Ir(m-ppy)(3) overthrows the concept of poor efficiency and shows excellent efficiency which is almost equal to that of fac-Ir(ppy)(3), fac-Ir(m-ppy)(3) and (ppy)(2)Ir(acac).     

以苯基吡唑为主配体的Ir配合物电子结构和光谱性质的密度泛函理论研究

用密度泛函理论(DFT)和含时密度泛函理论(TD-DFT)的B3LYP方法对以苯基吡唑ppz为主配体的4种Ir配合物Ir(ppz)₃, Ir(ppz)₂(acac), Ir(ppz)₂(pic)和Ir(ppz)₂(dbm)的电子结构和光谱性质进行了理论研究. 计算结果表明, 辅助配体的改变对Ir配合物的最高占据轨道(HOMO)的影响不大, 但会显著的降低分子最低空轨道(LUMO)的能级, 从而调节Ir配合物的HOMO和LUMO间的能隙. 4种配合物对应的发射跃迁分别为Ir(ppz)₃:d(Ir)+π(ppz)→π*(ppz); Ir(ppz)₂(pic):d(Ir)+(ppz)→π*(pic); Ir(ppz)₂(acac), Ir(ppz)₂(dbm):d(Ir)+π(acacdbm)→π*(acacdbm). 金属配合物的发光颜色可以通过选择合适的辅助配体调节.     

Stepwise synthesis of a hydrido, N-heterocyclic dicarbene iridium(III) pincer complex featuring mixed NHC/abnormal NHC ligands

We describe a stepwise synthesis of the hydrido, N-heterocyclic dicarbene iridium(III) pincer complex [Ir(H)I(C(NHC)CC(aNHC))(NCMe)] (3) which features a combination of normal and abnormal NHC ligands. The reaction of the bis(imidazolium) diiodide [(CH(imid)CHCH(imid))]I(2) (1) with [Ir(μ-Cl)(cod)](2) afforded first the mono-NHC Ir(I) complex [IrI(cod)(CH(imid)CHC(NHC))]I (2), which was then reacted with 2 equiv. of Cs(2)CO(3) in acetonitrile at 60 °C for 40 h to yield 3. These observations support our previously proposed mechanism for the formation of hydrido, N-heterocyclic dicarbene iridium(III) pincer complexes from the reaction of bis(imidazolium) salts with weak bases involving a mono-NHC Ir(I) intermediate. We describe the reactivity of the mono-NHC Ir(I) complex 2 under various conditions. By changing the reaction solvent from MeCN to toluene, we observed the cleavage of the imidazol-2-ylidene ring and the formation of an iminoformamide-containing mono-NHC Ir(I) complex [IrI(cod){[NHCH=CHN(Ad)CHO]CHC(NHC)}] (4). Complex 4 was also prepared in high yield from the reaction of 2 with strong bases (potassium tert-butoxide or potassium hexamethyldisilazane), via the initial formation of the complex [IrI(cod)(CH(NHC)CHC(NHC))] (5), which contains a coordinated NHC moiety and a free carbene arm, followed by subsequent hydrolysis of the latter. The bis(imidazolium) salt 1 can be deprotonated by strong bases to form the bis(carbene) ligand C(NHC)CHC(NHC) (6), which readily reacts with [Ir(μ-Cl)(cod)](2) to give the dinuclear complex [{IrI(cod)}(2)(μ-C(NHC)CHC(NHC))] (7), in which the N-heterocyclic bis(carbene) ligand bridges the two metals through the carbene carbon atoms.     

Synthesis, characteristics and photoluminescent properties of novel Ir-Eu heteronuclear complexes containing 2-carboxyl-pyrimidine as a bridging ligand

Two novel iridium(III) complexes, [Ir(dfppy)(2)(pmc)] and [Ir(ppy)(2)(pmc)] (dfppy = 2-(4',6'-difluoro-phenyl)pyridine, ppy = 1-phenyl-pyridine), were designed and synthesized using 2-carboxyl-pyrimidine (Hpmc) as an ancillary ligand. Single crystals were obtained and characterized by single crystal X-ray diffraction. The tetrametallic complexes {[(C^N)(2)Ir(μ-pmc)](3)EuCl(3)} (C^N = dfppy, ppy) were synthesized using the iridium(III) complexes as "ligands". Photophysical and theoretical studies indicate that [Ir(dfppy)(2)(pmc)] is more suitable for sensitizing the emission of Eu(III) ions than [Ir(ppy)(2)(pmc)].     

1,12-Diazaperylene and 2,11-dialkylated-1,12-diazaperylene iridium(iii) complexes [Ir(C^N)(2)(N^N)]PF(6): new supramolecular assemblies

A series of new monocationic iridium(iii) complexes [Ir(C^N)(2)(N^N)]PF(6) with "large-surface"α,α'-diimin ligands N^N (dap = 1,12-diazaperylene, dmedap = 2,11-dimethyl-1,12-diazaperylene, dipdap = 2,11-diisopropyl-1,12-diazaperylene) and different cyclometalating ligands C^N (piq = 1-phenylisoquinoline, bzq = benzo[h]quinoline, ppz = 1-phenylpyrazole, thpy = 2-(2-thienyl)pyridine, ppy = 2-phenylpyridine, meppy = 2-(4-methylphenyl)pyridine, dfppy = 2-(2,4-difluorophenyl)pyridine) were synthesized. The solid structures of the complexes [Ir(piq)(2)(dap)]PF(6), [Ir(bzq)(2)(dap)]PF(6), [Ir(ppy)(2)(dipdap)]PF(6), [Ir(piq)(2)(dmedap)]PF(6), [Ir(ppy)(2)(dap)]PF(6) and [Ir(ppz)(2)(dap)]PF(6) are reported. In [Ir(piq)(2)(dap)]PF(6), the dap ligand and one of the piq ligands of each cationic complex are involved in π-π stacking interactions forming supramolecular channels running along the crystallographic c axis. In the crystalline [Ir(bzq)(2)(dap)]PF(6)π-π stacking interactions between the metal complexes lead to the formation of a 2D layer structure. In addition, CH-π interactions were found in all compounds, which are what stabilizes the solid structure. In particular, a significant number of them were found in [Ir(piq)(2)(dap)]PF(6) and [Ir(bzq)(2)(dap)]PF(6). The crystal structures of [Ir(ppy)(2)(dipdap)]PF(6) and [Ir(ppy)(2)(dmedap)]PF(6) are also presented, being the first examples of bis-cyclometalated iridium(iii) complexes with phenanthroline-type α,α'-diimin ligands bearing bulky alkyl groups in the neighbourhood of the N-donor atoms. These ligands implicate a distorted octahedral coordination geometry that in turn destabilized the Ir-N(N^N) bonds. The new iridium(iii) complexes are not luminescent. All compounds show an electrochemically irreversible anodic peak between 1.15 and 1.58 V, which is influenced by the different cyclometalated ligands. All of the new complexes show two reversible successive one-electron "large-surface" ligand-centred reductions around -0.70 V and -1.30 V. Electrospray ionisation mass spectrometry (ESI-MS) and collision induced decomposition (CID) measurements were used to investigate the stability of the new complexes. Thereby, the stability agreed well with the order of the Ir-N(N^N) bond lengths.     

Intermolecular energy transfer involving an iridium complex studied by a combinatorial method

A recently developed combinatorial method utilizing angular dependence of evaporation rate was used to create compositional spread thin film libraries of Tris(2-pyridin-2-yl-indolizino[3,4,5-ab] isoindole-C(1), N('))iridium(III) [Ir(pin)(3)] and 4,4(')-N,N(')-dicarbazol-biphenyl (CBP) composite, with the molar fraction of Ir(pin)(3) complex varying in the 0.0003Ir(pin)(3) energy transfer proceeds by the Forster mechanism with the Forster radius of 30 A. The CBPxIr(pin)(3) composite has the highest photoluminescence quantum efficiency approximately 0.95, for chi(Ir(pin)(3) )=0.03 and is characterized by a structured green emission (lambda(max)=538 nm) originating from the ligand-centered (pi-pi(*))(3) state of the Ir(pin)(3) complex. On the contrary, the PL spectra of Ir(pin)(3) bulk are characterized by a weak red emission (lambda(max)=673 nm) attributed to the lowest metal-to-ligand charge transfer state. A statistical analysis based on a binomial distribution indicates that the emission from the (pi-pi(*))(3) state is quenched in Ir(pin)(3) molecules that are in a direct contact with each other.     

One-pot synthesis of strong solid state emitting mono-cyclometalated iridium(III) complexes: study of their aggregation induced enhanced phosphorescence

Strong solid-state greenish-blue emitting, mono-cyclometalated iridium complexes, [Ir(ppy)(PPh(3))(2)(H)(Cl)], 2a and [Ir(F(2)ppy)(PPh(3))(2)(H)(Cl)], 2b [ppyH = 2-phenylpyridine; F(2)ppyH = 2-(2',4'-difluoro)phenylpyridine], have been synthesized by a convenient route. The 'aggregation induced enhanced phosphorescence (AIEP)' activity exhibited by these complexes has been rationalized.     

以1-苯基吡唑为主配体的红光Ir(III)配合物的合成及光电特性

合成了一种新型红色磷光配合物二(1-苯基咪唑) (1-苯基异喹啉)合铱((ppz)₂Ir(piq)), 通过核磁共振氢谱(¹H NMR)对其结构进行了表征, 通过紫外-可见(UV-Vis)吸收光谱、荧光光谱、低温磷光光谱、循环伏安法及含时密度泛函理论(TD-DFT)对其光物理性能及能级结构进行了研究. 制备了一系列基于(ppz)₂Ir(piq)的电致发光器件, 研究了(ppz)₂Ir(piq)的电致发光性质. 结果表明, (ppz)₂Ir(piq)的UV-Vis 吸收峰主要位于296、342、395 和460 nm, 固态粉末的室温磷光发射峰位于618 nm, 在2-甲基四氢呋喃(2-MeTHF)溶液中其低温磷光发射峰位于598 nm, 其三线态能级(E_T)为2.07 eV. (ppz)₂Ir(piq)的最高占据轨道(HOMO), 其主要定域于配体ppz 和金属Ir(III)上, 最低未占据轨道(LUMO)主要定域于配体piq 上. (ppz)₂Ir(piq)的HOMO和LUMO 能级分别为-5.92和-3.62 eV. 基于(ppz)₂Ir(piq)电致发光器件的优化掺杂浓度为8%-12% (w), 最大电致发光谱峰位于616 nm,最大电流效率约10 cd·A^-1, 最大功率效率为4.44 lm·W^-1, 色坐标保持在(0.65, 0.35)附近, 是一种潜在的饱和红光磷光材料.     

Syntheses and properties of emissive iridium(III) complexes with tridentate benzimidazole derivatives

A series of novel emissive Ir(III) complexes having the coordination environments of [Ir(N--N--N)2]3+, [Ir(N--N--N)(N--N)Cl]2+, and [Ir(N--N--N)(N--C--N)]2+ with 2,6-bis(1-methyl-benzimidazol-2-yl)pyridine (L1, N--N--N), 1,3-bis(1-methyl-benzimidazol-2-yl)benzene (L2H, N--C--N), 4'-(4-methylphenyl)-2,2':6',2' '-terpyridine (ttpy, N--N--N), and 2,2'-bipyridine (bpy, N--N) have been synthesized and their photophysical and electrochemical properties studied. The Ir(III) complexes exhibited phosphorescent emissions in the 500-600 nm region, with lifetimes ranging from approximately 1-10 micros at 295 K. Analysis of the 0-0 energies and the redox potentials indicated that the lowest excited state of [Ir(L1)(L2)]2+ possessed the highest contribution of 3MLCT (MLCT = metal-to-ligand charge transfer) among the Ir(III) complexes, reflecting the sigma-donating ability of the tridentate ligand, ttpy < L1 < L2. The emission quantum yields (phi) of the Ir(III) complexes ranged from 0.037 to 0.19, and the highest phi value (0.19) was obtained for [Ir(L1)(bpy)Cl]2+. Radiative rate constants (k(r)) were 1.2 x 10(4) s(-1) for [Ir(ttpy)2]3+, 3.7 x 10(4) s(-1) for [Ir(L1)(bpy)Cl]2+, 3.8 x 10(4) s(-1) for [Ir(ttpy)(bpy)Cl]2+, 3.9 x 10(4) s(-1) for [Ir(L1)2]3+, and 6.6 x 10(4) s(-1) for [Ir(L1)(L2)]2+. The highest radiative rate for [Ir(L1)(L2)]2+ with the highest contribution of 3MLCT could be explained in terms of the singlet-triplet mixing induced by spin-orbit coupling of 5d electrons in the MLCT electronic configurations.     

Synthesis and Luminescent Properties of Iridium Complexes with Reduced Concentration Quenching Effect

Three novel cyclometalated ligands 1-benzyl-2-phenyl-1H-benzoimidazole(BPBM), 1-(4-methoxy-benzyl)-2-(4-methoxy-phenyl)-1H-benzoimidazole(MBMPB) and 4-[2-(4-dimethylamino-phenyl)-benzoinidazol-1-ylmethyl]-phenyl-dimethyl-amine(DBPA) were designed and synthesized, and the corresponding highly efficiency green-emitting phosphorescent iridium complexes Ir(BPBM)₂(acac)(1), Ir(MBMPB)₂(acac)(2) and Ir(DPBA)₂(acac) (3) with acetylacetone(acac) as auxiliary ligand were also synthesized. The ligands are functionalized by bulky non-planarity substituents, thus the phosphorescent concentration quenching is substantially suppressed, and all the complexes exhibit bright photoluminescence(PL) in solid state. The photo-physical properties of the three iridium complexes were researched in detail. The results indicate that they have potential application in fabricating non-doped electrophosphorescence device.     

Phosphorescence vs fluorescence in cyclometalated platinum(II) and iridium(III) complexes of (oligo)thienylpyridines

Two newly prepared oligothienylpyridines, 5-(2-pyridyl)-5'-dodecyl-2,2'-bithiophene, HL(2), and 5-(2-pyridyl)-5'-dodecyl-2,2':5',2'-ter-thiophene, HL(3), bind to platinum(II) and iridium(III) as N∧C-coordinating ligands, cyclometallating at position C(4) in the thiophene ring adjacent to the pyridine, leaving a chain of either one or two pendent thiophenes. The synthesis of complexes of the form [PtL(n)(acac)] and [Ir(L(n))(2)(acac)] (n = 2 or 3) is described. The absorption and luminescence properties of these four new complexes are compared with the behavior of the known complexes [PtL(1)(acac)] and [Ir(L(1))(2)(acac)] {HL(1) = 2-(2-thienyl)pyridine}, and the profound differences in behavior are interpreted with the aid of time-dependent density functional theory (TD-DFT) calculations. Whereas [PtL(1)(acac)] displays solely intense phosphorescence from a triplet state of mixed ππ*/MLCT character, the phosphorescence of [PtL(2)(acac)] and [PtL(3)(acac)] is weak, strongly red shifted, and accompanied by higher-energy fluorescence. TD-DFT reveals that this difference is probably due to the metal character in the lowest-energy excited states being strongly attenuated upon introduction of the additional thienyl rings, such that the spin-orbit coupling effect of the metal in promoting intersystem crossing is reduced. A similar pattern of behavior is observed for the iridium complexes, except that the changeover to dual emission is delayed to the terthiophene complex [Ir(L(3))(2)(acac)], reflecting the higher degree of metal character in the frontier orbitals of the iridium complexes than their platinum counterparts.     

Syntheses, structures, and reactivities of mono- and dinuclear iridium thiolato complexes containing nitrosyl ligands

Reactions of the iridium(III) nitrosyl complex [Ir(NO)Cl2(PPh3)2] (1) with hydrosulfide and arenethiolate anions afforded the square-pyramidal iridium(III) complex [Ir(NO)(SH)2(PPh3)2] (2) with a bent nitrosyl ligand and a series of the square-planar iridium(I) complexes [Ir(NO)(SAr)2(PPh3)] (3a, Ar = C6H2Me3-2,4,6 (Mes); 3b, Ar = C6H3Me2-2,6 (Xy); 3c, Ar = C6H2Pri3-2,4,6) containing a linear nitrosyl ligand, respectively. Complex 1 also reacted with alkanethiolate anions or alkanethiols to give the thiolato-bridged diiridium complexes [Ir(NO)(mu-SPri)(SPri)(PPh3)]2 (4) and [Ir(NO)(mu-SBut)(PPh3)]2 (5). Complex 4 contains two square-pyramidal iridium(III) centers with a bent nitrosyl ligand, whereas 5 contains two tetrahedral iridium(0) centers with a linear nitrosyl ligand and has an Ir-Ir bond. Upon treatment with benzoyl chloride, 3a and 3b were converted into the (diaryl disulfide)- and thiolato-bridged dichlorodiiridium(III) complexes [[IrCl(mu-SC6HnMe4-nCH2)(PPh3)]2(mu-ArSSAr)] (6a, Ar = Mes, n = 2; 6b, Ar = Xy, n = 3) accompanied by a loss of the nitrosyl ligands and cleavage of a C-H bond in an ortho methyl group of the thiolato ligands. Similar treatment of 4 gave the dichlorodiiridium complex [Ir(NO)(PPh3)(mu-SPri)3IrCl2(PPh3)] (7), which has an octahedral dichloroiridium(III) center and a distorted trigonal-bipyramidal Ir(I) atom with a linear nitrosyl ligand. The detailed structures of 3a, 4, 5, 6a, and 7 have been determined by X-ray crystallography.     

Organometallic complexes as hole-transporting materials in organic light-emitting diodes

The use of metal complexes fac-tris(1-phenylpyrazolato-N,C(2)('))cobalt(III) [fac-Co(ppz)(3)], fac-tris(2-phenylpyridinato-N,C(2)(') cobalt(III) [fac-Co(ppy)(3)], and [tris[2-((pyrrole-2-ylmethylidene)amino)ethyl]amine]gallium(III) [Ga(pma)] as materials for hole-transporting layers (HTL) in organic light-emitting diodes (OLEDs) is reported. Co(ppz)(3) and Co(ppy)(3) were prepared by following literature procedures and isolated as mixtures of facial (fac) and meridional (mer) isomers. The more stable fac isomers were separated from the unstable mer forms via column chromatography and thermal gradient sublimation. Crystals of fac-Co(ppz)(3) are monoclinic, space group P2(1)/c, with a = 13.6121(12) A, b = 15.5600(12) A, c = 22.9603(17) A, beta = 100.5 degrees, V = 4781.3(7) A(3), and Z = 8. [Tris[2-((pyrrol-2-ylmethylidene)amino)ethyl]amine]gallium [Ga(pma)] was prepared by the reaction of gallium(III) nitrate with the pmaH(3) ligand precursor in methanol. Ga(pma) crystallizes in the cubic space group I3d with cell parameters a = 20.2377(4) A, b = 20.2377(4) A, c = 20.2377(4) A, beta = 90.0 degrees, V = 8288.6(3) A(3), and Z = 16. These cobalt and gallium complexes are pale colored to colorless solids, with optical energy gaps ranging 2.6-3.36 eV. A two-layer HTL/ETL (ETL = electron-transporting layer) device structure using fac-Co(ppz)(3) and fac-Co(ppy)(3) as the HTL does not give efficient electroluminescence. However, the introduction of a thin layer of a hole-transporting material (N,N'-bis(1-naphthyl)-N,N'-diphenylbenzidine, NPD) as an energy "stair-step" and electron/exciton-blocker dramatically improves the device performance. Both fac-Co(ppz)(3) and fac-Co(ppy)(3) devices give external quantum efficiencies higher than 1.0%, with brightness 5000 and 7000 Cd/m(2) at 10 V, respectively. Ga(pma) also functions as an efficient interface layer, giving device performances very similar to those of analogous devices using NPD as the interface layer. Stability tests have been carried out for Co(ppz)(3)/NPD/Alq(3) and Co(ppy)(3)/NPD/Alq(3) devices. While fac-Co(ppy)(3) gave stable OLEDs, the fac-Co(ppz)(3)-based devices had very short lifetimes. On the basis of the experimental results of chemical oxidation of fac-Co(ppz)(3), the major cause for the fast decay of the fac-Co(ppz)(3) device is proposed to be the decomposition of fac-Co(ppz)(3)(+) in the HTL layer during the device operation.     

Ligand effects on luminescence of new type blue light-emitting mono(2-phenylpyridinato)iridium(III) complexes

Newly prepared hydrido iridium(III) complexes [Ir(ppy)(PPh3)2(H)L](0,+) (ppy = bidentate 2-phenylpyridinato anionic ligand; L = MeCN (1b), CO (1c), CN(-) (1d); H being trans to the nitrogen of ppy ligand) emit blue light at the emission lambda(max) (452-457, 483-487 nm) significantly shorter than those (468, 495 nm) of the chloro complex Ir(ppy)(PPh3)2(H)(Cl) (1a). Replacing ppy of 1a-d with F2ppy (2,4-difluoro-2-phenylpyridinato anion) and F2Meppy (2,4-difluoro-2-phenyl-m-methylpyridinato anion) brings further blue-shifts down to the emission lambda(max) at 439-441 and 465-467 nm with CIE color coordinates being x = 0.16 and y = 0.18-0.20 to display a deep-blue photoemission. No significant blue shift is observed by replacing PPh3 of 1a with PPh2Me to produce Ir(ppy)(PPh2Me)2(H)(Cl) (1aPPh 2Me), which displays emission lambda max at 467 and 494 nm. The chloro complexes, [Ir(ppy)(PPh3)2(Cl)(L)](0,+) (L = MeCN (2b), CO (2c), CN(-) (2d)) having a chlorine ligand trans to the nitrogen of ppy also emit deep-blue light at emission lambda(max) 452-457 and 482-487 nm.     

Palladium-catalysed direct arylation of a tris-cyclometallated Ir(III) complex bearing 2,2'-thienylpyridine ligands: a powerful tool for the tuning of luminescence properties

Palladium-catalysed direct 5-arylation of metallated thiophenes of fac-Ir(N^C(3')-thpy)(3) with aryl bromides via C-H bond functionalisation allows the synthesis of a variety of new Ir complexes in only one step (thpyH = 2,2'-thienylpyridine). The method offers simple modification of the nature of the ligand and hence of the photophysical properties of such complexes.     

Iridium luminophore complexes for unimolecular oxygen sensors

In this study, a series of novel luminescent cyclometalated Ir(III) complexes has been synthesized and evaluated for use in unimolecular oxygen-sensing materials. The complexes Ir(C6)(2)(vacac), 1, Ir(ppy)(2)(vacac), 2, fac-Ir(ppy)(2)(vppy), 3, and mer-Ir(ppy)(2)(vppy), 4, where C6 = Coumarin 6, vacac = allylacetoacetate, ppy = 2-phenylpyridine, and vppy = 2-(4-vinylphenyl)pyridine, all have pendent vinyl or allyl groups for polymer attachment via the hydrosilation reaction. These luminophore complexes were characterized by NMR, absorption, and emission spectroscopy, luminescence lifetime and quantum yield measurements, elemental analysis, and cyclic voltammetry. Complex 1 was structurally characterized using X-ray crystallography, and a series of 1-D ((1)H, (13)C) and 2-D ((1)H-(1)H, (1)H-(13)C) NMR experiments were used to resolve the solution structure of 4. Complexes 1 and 3 displayed the longest luminescence lifetimes and largest quantum efficiencies in solution (tau = 6.0 micros, phi = 0.22 for 1; tau = 0.4 micros, phi = 0.2 for 3) and, as result, are the most promising candidates for future luminescence-quenching-based oxygen-sensing studies.     

Synthesis of Ir Catalysts Featuring Amide-functionalized NHC Ligands and Survey of their Activity on Formic Acid Dehydrogenation

2 a and 2 b , [Ir(CI)(COD)(NHC)] (COD=1,5-cyclooctadiene), have been prepared via transmetallation from NHC−Ag complexes. [Rh(CI)(COD)(NHC)] ( 4 ) was prepared analogously. [Ir({κ-C,N-(NHC-acetamide−1H)}(COD)] ( 3 c ) has been synthesized via transmetallation from the deprotonated NHC−Ag complex. [IrCp*({κ-C,N-(NHC-acetamide−1H)}] ( 5 ) (Cp*=pentamethylcyclopentadienyl), has been obtained analogously. [Ir(CI)(CO)₂(NHC)] ( 6 ) and [Ir({κ-C,N-(NHC-acetamide−1H)}(CO)₂] ( 7 ) have been prepared by carbonylation of 2 b and 3 c , respectively. The catalytic activity of these complexes has been evaluated in the dehydrogenation of formic acid, under solventless conditions, in the presence of water as a cosolvent, and in a 5 : 2 HCOOH/Et₃N mixture, with the best TOF values being obtained in the case of the latter. Stoichiometric experiments suggest COD hydrogenation as the preactivation step.     

Photochemical and time resolved spectroscopic studies of intermediates relevant to iridium-catalyzed methanol carbonylation: photoinduced CO migratory insertion

Photoreaction, time-resolved infrared (TRIR), and DFT studies were utilized to probe transformations between iridium complexes with possible relevance to the mechanisms of the iridium/iodide-catalyzed methanol carbonylation to acetic acid. Solution-phase continuous and laser flash photolysis of the tetraphenylarsonium salt of the fac-[CH3Ir(CO)2I3]- anion (1a) under excess carbon monoxide resulted in migratory insertion to give the acyl complex ion mer,trans-[Ir(C(O)CH3)(CO)2I3]- (2a). The latter was isolated as its AsPh4+ salt, and its X-ray crystal structure was determined. TRIR spectra indicate that several transients are generated upon flash photolysis of 1a. The principal photoreaction is CO dissociation, and this is proposed to generate the isomeric complexes fac-[CH3Ir(CO)(Sol)I3]- (I(CO)(fac), Sol = solvent) and mer,trans-[CH3Ir(CO)(Sol)I3]- (I(CO)(mer)). I(CO)(fac) reacts with CO to regenerate 1a with a second-order rate constant (k(CO)) approximately 2.5 x 10(7) M(-1) s(-1) in ambient dichloroethane, while I(CO)(mer) is the apparent precursor to 2a. Kinetics studies indicate the photoinduced formation of a third intermediate (I(M)), hypothesized to be the anionic acyl complex fac-[Ir(C(O)CH3)(CO)(Sol)I3]-. In the absence of added CO, these intermediates undergo dimerization to form a mixture of isomers with the apparent formula [Ir(C(O)CH3)(CO)I3]2(2-). One of these dimers was isolated as the AsPh4+ salt, and the crystal structure was determined. Addition of excess pyridine to a solution of the dimers gave the neutral complex mer,trans-[Ir(C(O)CH3)(CO)(py)2I2], which was characterized by FTIR, NMR, and X-ray crystallography. These transformations, especially the unprecedented photoinduced CO insertion reaction, are discussed and interpreted in terms of the factors favoring migratory insertion dynamics.     

空穴传输基团修饰的吡嗪铱配合物的合成及其发光性质

设计合成了空穴传输性咔唑基团修饰的吡嗪配体, 2,3-二(4-(9-咔唑基甲基)苯基)-5-甲基吡嗪(CzMPMP)及其铱配合物Ir(CzMPMP)2(acac)(acac: 乙酰丙酮). 用核磁共振(NMR)、质谱、元素分析等方法对其进行了表征, 并用紫外-可见吸收光谱、液相和固相光致发光光谱对其光学性质进行了研究. 通过与没有咔唑取代基的2,3-二苯基-5-甲基吡嗪铱配合物Ir(DPMP)2(acac)进行对照, 说明咔唑基团对配合物的光学性质有显著影响. 不含咔唑取代基的配合物Ir(DPMP)2(acac)的固态光致发光光谱中存在很强的激活双体(excimer)峰, 而Ir(CzMPMP)2(acac)的固态光致发光光谱中未发现有激活双体峰; 并且在溶液中, 含有咔唑取代基的配合物Ir(CzMPMP)2(acac)较Ir(DPMP)2(acac)的光致发光强度有显著提高. 这些结果说明咔唑基团的空间位阻可以有效阻止配合物成膜时产生激活双体, 从而消除发射峰红移现象并提高发光效率.