Chemistry of re with N,N'-bis(2-pyridylmethyl)ethylenediamine (H2pmen): hydrolysis, dehydrogenation, and ternary complexes

A number of Re complexes with N,N'-bis(2-pyridylmethyl)ethylenediamine (H2pmen) have been made from [NH4][ReO4]. [ReOCl2(H2pmen)]Cl, [ReOCl(Hpmen)][ReO4], and [ReO2(H2pmen)][ReO4] are related by hydrolysis/HCl substitution. [ReOCl(Hpmen)][ReO4] was structurally characterized and found to contain a water-stable amido-Re bond. Dehydrogenation of the N-donor ligand from each amine to imine with concomitant two-electron reduction of the Re center occurs readily in these systems. With suitable 3-hydroxy-4-pyrones, ternary complexes such as [ReIIICl(ma)(C14H14N4)][ReO4].CH3OH, 5, were made from [NH4][ReO4], H2pmen.4HCl and pyrones in one-pot syntheses. 5, a seven-coordinate ReIII complex, was structurally characterized.     

Effect of Pyridyl Donors in the Chelation of Aluminum(III), Gallium(III), and Indium(III)

A new preparation of N,N'-bis(2-pyridylmethyl)ethylenediamine-N,N'-diacetic acid (H(2)bped) is reported, and its properties of complexation with Al(III), Ga(III), In(III), and Co(III) are investigated. The molecular structure of the cobalt(III) complex [Co(bped)]PF(6).CH(3)CN.H(2)O (C(20)H(25)CoF(6)N(5)O(5)P) has been solved by X-ray methods; the complex crystallizes in the triclinic space group P&onemacr;, with a = 10.611(2) ?, b = 12.720(2) ?, c = 9.868(1) ?, alpha = 102.70(1) degrees, beta =93.60(1) degrees, gamma = 106.96(1) degrees, and Z = 2. The structure was solved by direct methods and was refined by full-matrix least-squares procedures to R = 0.041 (R(w) = 0.038) for 4312 reflections with I > 3sigma(I). The Co(III) ion is coordinated in a distorted octahedral geometry with an N(4)O(2) donor atom set. The carboxylato oxygen atoms are coordinated trans, while the pyridyl nitrogen atoms are coordinated cis. The largest distortion from octahedral geometry is the N(pyridyl)-Co-N(pyridyl) angle of 107 degrees. Complex formation constants have been measured at 25 degrees C (&mgr; = 0.16 M (NaCl)). log K([M(bped)](+)) (log K([M(bped)(OH)])): M = Al, 10.85 (6.37); M = Ga, 19.89 (15.62); M = In, 22.6 (15.44). A protonated complex was also detected, [Ga(Hbped)](2+), log K = 21.79. The order of stability is In(III) > Ga(III) > Al(III) for the binary species, [M(bped)](+). The solution structures of the complexes have been probed in multinuclear NMR ((1)H, (13)C, (27)Al) studies, and these solution structures are compared with the solid state structure of the cobalt(III) complex. The complexes [In(bped)](+) and [In(bped)(OH)] are proposed to contain 7-coordinate In(III) with water and hydroxide completing the respective coordination spheres. The gallium complexes are proposed to be 6-coordinate: the [Ga(Hbped)](2+) complex contains a nondeprotonated carboxylic acid group which is not coordinated, and [Ga(bped)(OH)] contains a coordinated hydroxide which displaces a carboxylato donor. The [Al(bped)(OH)] complex may be 5-coordinate on the basis of its downfield (27)Al NMR chemical shift, 54 ppm.     

Homotrinuclear lanthanide(III) arrays: assembly of and conversion from mononuclear and dinuclear units

The reactions of potentially hexadentate H2bbpen (N,N'-bis(2-hydroxybenzyl)-N,N'-bis(2-pyridylmethyl)-ethylenediamine, H2L1), H2(Cl)bbpen (N,N'-bis(5-chloro-2-hydroxybenzyl)-N,N'-bis(2-pyridylmethyl)ethylenediamine, H2L2), and H2(Br)bbpen (N,N'-bis(5-bromo-2-hydroxybenzyl)-N,N'-bis(2-pyridylmethyl)ethylenediamine, H2L3) with Ln(III) ions in the presence of a base in methanol resulted in three types of complexes: neutral mononuclear ([LnL(NO3)]), monocationic dinuclear ([Ln2L2(NO3)]+), and monocationic trinuclear ([Ln3L2(X)n(CH3OH)]+), where X = bridging (CH3COO-) and bidentate ligands (NO3-, CH3COO-, ClO4-) and n is 4. The formation of a complex depends on the base (hydroxide or acetate) and the size of the respective Ln(III) ion. All complexes were characterized by infrared spectroscopy, mass spectrometry, and elemental analyses; in some cases, X-ray diffraction studies were also performed. The structures of the neutral mononuclear [Yb(L1)(NO3)], dinuclear [Pr2(L1)2(NO3)(H2O)]NO3.CH3OH and [Gd2(L1)2(NO3)]NO3.CH3OH.3H2O, and trinuclear [Gd3(L3)2(CH3COO)4(CH3OH)]ClO4.5CH3OH and [Sm3(L1)2(CH3COO)2(NO3)2(CH3OH)]NO3.CH3OH.3.65H2O were solved by X-ray crystallography. The [LnL(NO3)] or [Ln2L2(NO3)]+ complexes could be converted to [Ln3L2(X)n(CH3OH)]+ complexes by the addition of 1 equiv of a Ln(III) salt and 2-3 equiv of sodium acetate in methanol. The trinuclear complexes were found to be the most stable of the three types, which was evident from the presence of the intact monocationic high molecular weight parent peaks ([Ln3L2(X)n]+) in the mass spectra of all the trinuclear complexes and from the ease of conversion from the mononuclear or dinuclear to the trinuclear species. The incompatibility of the ligand denticity with the coordination requirements of the Ln(III) ions was proven to be a useful tool in the construction of multinuclear Ln(III) metal ion arrays.     

Phosphato, chromato, and perrhenato complexes of titanium(IV) and zirconium(IV) containing Kläui's tripodal ligand

Treatment of titanyl sulfate in dilute sulfuric acid with 1 equiv of NaL(OEt) (L(OEt)(-) = [(eta(5)-C(5)H(5))Co{P(O)(OEt)(2)](3)](-)) in the presence of Na(3)PO(4) and Na(4)P(2)O(7) led to isolation of [(L(OEt)Ti)(3)(mu-O)(3)(mu(3-)PO(4))] (1) and [(L(OEt)Ti)(2)(mu-O)(mu-P(2)O(7))] (2), respectively. The structure of 1 consists of a Ti(3)O(3) core capped by a mu(3)-phosphato group. In 2, the [P(2)O(7)](4-) ligands binds to the two Ti's in a mu:eta(2),eta(2) fashion. Treatment of titanyl sulfate in dilute sulfuric acid with NaL(OEt) and 1.5 equiv of Na(2)Cr(2)O(7) gave [(L(OEt)Ti)(2)(mu-CrO(4))(3)] (3) that contains two L(OEt)Ti(3+) fragments bridged by three mu-CrO(4)(2-)-O,O' ligands. Complex 3 can act as a 6-electron oxidant and oxidize benzyl alcohol to give ca. 3 equiv of benzaldehyde. Treatment of [L(OEt)Ti(OTf)(3)] (OTf(-) = triflate) with [n-Bu(4)N][ReO(4)] afforded [[L(OEt)Ti(ReO(4))(2)](2)(mu-O)] (4). Treatment of [L(OEt)MF(3)] (M = Ti and Zr) with 3 equiv of [ReO(3)(OSiMe(3))] afforded [L(OEt)Ti(ReO(4))(3)] (5) and [L(OEt)Zr(ReO(4))(3)(H(2)O)] (6), respectively. Treatment of [L(OEt)MF(3)] with 2 equiv of [ReO(3)(OSiMe(3))] afforded [L(OEt)Ti(ReO(4))(2)F] (7) and [[L(OEt)Zr(ReO(4))(2)](2)(mu-F)(2)] (8), respectively, which reacted with Me(3)SiOTf to give [L(OEt)M(ReO(4))(2)(OTf)] (M = Ti (9), Zr (10)). Hydrolysis of [L(OEt)Zr(OTf)(3)] (11) with Na(2)WO(4).xH(2)O and wet CH(2)Cl(2) afforded the hydroxo-bridged complexes [[L(OEt)Zr(H(2)O)](3)(mu-OH)(3)(mu(3)-O)][OTf](4) (12) and [[L(OEt)Zr(H(2)O)(2)](2)(mu-OH)(2)][OTf](4) (13), respectively. The solid-state structures of 1-3, 6, and 11-13 have been established by X-ray crystallography. The L(OEt)Ti(IV) complexes can catalyze oxidation of methyl p-tolyl sulfide with tert-butyl hydroperoxide. The bimetallic Ti/ Re complexes 5 and 9 were found to be more active catalysts for the sulfide oxidation than other Ti(IV) complexes presumably because Re alkylperoxo species are involved as the reactive intermediates.     

Synthesis and characterization of six-coordinate "3 + 2" mixed-ligand oxorhenium complexes with the o-diphenylphosphinophenolato ligand and tridentate coligands of different N and S donor atom combinations

A series of octahedral six-coordinate oxorhenium(V) mixed ligand complexes containing the common [ReO(L)]2+ fragment (L = o-OC6H4P(C6H5)2] have been synthesized and characterized. Hence, it was shown that the [ReO(L)]2+ moiety can accommodate a variety of tridentate ligands containing a central amine group amenable to deprotonation and different combinations of lateral groups, such as ethylamine, substituted ethylamine, ethylthiol, and ethylthioether arms. In particular, by reaction of equimolar amounts of the pertinent HLn ligands with the [(n-C4H9)4N][ReOCl3(L)] precursor in refluxing acetonitrile/methanol or dichloromethane/methanol mixtures, the following series of [ReO(Ln)(L)]+/0 oxorhenium(V) complexes has been generated: ReO[[N(CH2CH2NH2)2][o-OC6H4P(C6H5)2]]Cl (1); ReO[[C2H5)2NCH2CH2NCH2CH2S][o-OC6H4P5)2]] (2); ReO[[(CH2)4NCH2CH2NCH2CH2S][o-OC6H4P(C6H4P(C6H5)2]] (3); and ReO[[C2H5SCH2CH2NCH2CH2S][o-OC6H4P(C6H5)2]] (4). The complexes are closed-shell 18-electron oxorhenium species, which adopt octahedral geometries both in solution and in the solid state, as established by conventional physicochemical techniques including multinuclear NMR and single-crystal X-ray diffraction analyses.     

ReO(N2O2)X] complexes: "4 + 1"?

[ReO(ppme)X] (where ppme(2-) is 2,5-diazo-N,N'-dimethylhexyl-1,6-bis(phenylphosphinate), X = Br0.3Cl0.7) has been synthesized via a substitution reaction and structurally characterized. The coordination geometry is a distorted octahedron and one phosphinate coordinates cis and the other trans to the oxo O atom. This coordination mode is conserved in all [ReOppmeX] complexes synthesized in this study. [ReO(ppme)Cl] has been prepared by a reduction/complexation reaction from [NH4][ReO4]. [ReO(ppme)Cl] reacts with thiocyanate and benzene thiolate forming [ReO(ppme)X] (X = (-)NCS, (-)SC6H5), but the one-pot synthesis of the respective ternary thiolate complexes from perrhenate was not successful. The reduction/complexation reaction of a thiol, H2ppmeCl4, and perrhenate resulted in the formation of [H3ppme][ReO(SR)4], the reaction of which with [ReO(ppme)Cl] does not lead to [ReO(ppme)SR] in high yields.     

Dimeric uranyl complexes with bridging perrhenates

The reaction between [UO2(ReO4)2.H(2)O] and two equivalents of either tri-n-butyl phosphine oxide (TBPO) or tri-iso-butyl phosphate (TiBP) results in the formation of [UO2(mu2-ReO4)(ReO4)(TBPO)2]2 (1) and [UO2(mu2-ReO4)(ReO4)(TiBP)2]2 (2) respectively. Both complexes crystallise as two structurally similar centrosymmetric dimers, the cores containing two uranyl moieties linked by bridging perrhenates. Two P=O donor ligands and one monodenatate perrhenate complete the pentagonal bipyramidal coordination sphere at each metal centre. Both complexes have also been characterised in the solid state by vibrational and absorption spectroscopy. Solution spectroscopic characterisation indicates that both perrhenate and phosphine oxide (1) or phosphate (2) remain coordinated, although it is not possible to state conclusively that the dimeric species remain intact. A low resolution structural study of a minor product from the reaction that yielded revealed a monomeric complex with only monodentate perrhenate coordination, [UO2(ReO4)2(H2O)(TiBP)2] (2'). These results represent the first structural evidence for the bridging coordination mode of perrhenate on coordination to an actinide and yields further insight into the possible solvent phase pertechnetate complexes that may exist in PUREX process phosphate rich solvent.     

Synthesis, characterization, and stereochemistry of oxorhenium(V) complexes with 2-aminoethanethiolate

A series of oxorhenium(V) complexes with 2-aminoethanethiolate (aet), [ReO(aet-N,S)(D-pen-N,O,S)] (2), [[ReO(aet-N,S)(2)](2)O] (3), [ReO(Cl)(aet-N,S)(2)] (4), and [ReO(aet-N,S)(Haet-S)(2)]Cl(2) ([5]Cl(2)) was newly prepared starting from ReO(4)(-). The reaction of NH(4)ReO(4) with a 1:1 mixture of Haet.HCl and D-H(2)pen (D-penicillamine) in the presence of SnCl(2).2H(2)O in water gave 2, 3, and the known complex [ReO(D-Hpen-N,S)(D-pen-N,O,S)] (1). These complexes were fractionally precipitated by controlling the pH of the reaction solution. The complex 2 was also prepared in a higher yield by a similar reaction using methanol as a solvent. The crystal structure of 2 was determined by X-ray crystallography; 2 crystallizes in the tetragonal space group P4(3) with a = 9.621(1), c = 12.911(1) A, V = 1195.0(3) A(3), and Z = 4. The oxorhenium(V) core in 2 is coordinated by a bidentate-N,S aet ligand and a tridentate-N,O,S D-pen ligand, having a distorted octahedral geometry with a cis-N cis-S configuration in the equatorial plane perpendicular to the O-Re-O axis. The 1:2 reaction of NH(4)ReO(4) with Haet.HCl in the presence of SnCl(2).2H(2)O in methanol produced 4, which is interconvertible with 3, while the corresponding 1:3 reaction resulted in the isolation of [5]Cl(2). The complexes 4 and 5 were also structurally characterized; 4 crystallizes in the monoclinic space group P2(1)/c with a = 6.839(1), b = 10.0704(6), c = 14.1075(8) A, beta = 91.729(8) degrees, V = 971.2(2) A(3), and Z = 4, while [5]Cl(2) crystallizes in the triclinic space group P1 with a = 11.938(3), b = 12.366(3), c = 5.819(1) A, alpha = 102.71(2), beta = 101.28(2), gamma = 75.41(2) degrees, V = 802.0(3) A(3), and Z = 2. In 4, the oxorhenium(V) core is octahedrally coordinated by two bidentate-N,S aet ligands, which form a cis-N cis-S configurational equatorial plane with a Cl(-) ion trans to the oxo ligand. On the other hand, the oxorhenium(V) core in [5](2+) is coordinated by one bidenate-N,S aet and two monodentate-S Haet ligands, having a distorted trigonal-bipyramidal geometry with S and N donors at the apical positions.     

Discrete and monodimensional heteropolynuclear structures formed by tetracarboxylatodiruthenium(II,III) and perrhenato fragments

Reaction between cationic units of carboxylate-bridged diruthenium complexes [Ru(2)(mu-O(2)CR)(4)](+) (R = Me, CMePh(2), CMe(3), CH(2)CH(2)OMe, C(Me)=CHEt, C(6)H(4)-p-OMe, Ph) and tetrabutylammonium perrhenate gives complexes with different arrangements in the solid state. Thus, the compounds Ru(2)(mu-O(2)CR)(4)(ReO(4)) [R = Me (1), CMePh(2) (2), CMe(3) (3), CH(2)CH(2)OMe (4), C(Me)=CHEt (5), C(6)H(4)-p-OMe (6), Ph (7)] have polymeric structures with the diruthenium units linked by perrhenate ligands in the axial positions. The structures of complexes 3.THF and 4 were established by single-crystal X-ray diffraction. The tetrahedral geometry of the ReO(4)(-) anion permits the formation of a chain close to the linearity. In contrast to the polymeric chains observed in complexes 1-7, the reaction of [Ru(2)(mu-O(2)CPh)(4)](+) with NBu(4)ReO(4) also affords the compounds Ru(2)(mu-O(2)CPh)(4)(ReO(4))(H(2)O) (8) and NBu(4)[Ru(2)(mu-O(2)CPh)(4)(ReO(4))(2)] (9) depending on the reaction conditions. The structure of 8 consists of cationic and anionic units, [Ru(2)(mu-O(2)CPh)(4)(H(2)O)(2)](+) and [Ru(2)(mu-O(2)CPh)(4)(ReO(4))(2)](-), linked by hydrogen bonds, which give a three-dimensional net. The structure of complex 9.0.5H(2)O has an anionic unit similar to that of 8, whose counterion is NBu(4)(+). The Ru-Ru bond distances are slightly longer in [Ru(2)(mu-O(2)CPh)(4)(ReO(4))(2)](-) than in the polymeric compounds Ru(2)(mu-O(2)CR)(4)(ReO(4)). The magnetic behavior owes to the existence of zero-field splitting (ZFS) and a weak antiferromagnetic coupling. The experimental data are fitted with a model that considers the ZFS effect using the Hamiltonian (D) = SDS. The weak antiferromagnetic coupling is introduced as a perturbation, using the molecular field approximation.     

Syn-Anti Isomerism in a Mixed-Ligand Oxorhenium Complex, ReO[SN(R)S][S

The simultaneous action of the tridentate ligand (C(2)H(5))(2)NCH(2)CH(2)N(CH(2)CH(2)SH)(2) and the monodentate coligand HSC(6)H(4)OCH(3) on a suitable ReO(3+) precursor results in a mixture of syn- and anti-oxorhenium complexes, ReO[(C(2)H(5))(2)NCH(2)CH(2)N(CH(2)CH(2)S)(2)] [SC(6)H(4)OCH(3)], in a ratio of 25/1. The complexes are prepared by a ligand exchange reaction using ReO(eg)(2) (eg = ethylene glycol), ReOCl(3)(PPh(3))(2), or Re(V)-citrate as precursor. Both complexes have been characterized by elemental analysis, FT-IR, UV-vis, X-ray crystallography, and NMR spectroscopy. The syn isomer C(17)H(29)N(2)O(2)S(3)Re crystallizes in the monoclinic space group P2(1)/n, a = 14.109(4) ?, b = 7.518(2) ?, c = 20.900(5) ?, beta = 103.07(1) degrees, V = 2159.4(9) ?(3), Z = 4. The anti isomer C(17)H(29)N(2)O(2)S(3)Re crystallizes in P2(1)/n, a = 9.3850(7) ?, b = 27.979(2) ?, c = 8.3648(6) ?, beta = 99.86(1) degrees, V = 2163.9(3) ?(3), Z = 4. Complete NMR studies show that the orientation of the N substituent chain with respect to the Re=O core greatly influences the observed chemical shifts. Complexes were also prepared at the tracer ((186)Re) level by using (186)Re-citrate as precursor. Corroboration of the structure at tracer level was achieved by comparative HPLC studies.     

Calix[4]arene rhenium(V) complexes as potential radiopharmaceuticals

The calix[4]arene platform was used for the syntheses of novel rhenium(V) complexes, that may have potential applications as radiopharmaceuticals. The reaction of ReO(PPh3)2Cl3 with tetradentate N2O2-calix[4]arene ligand 8 in ethanol gave the novel mixed-ligand rhenium complex 9 with the structure ReO(N2O2-calix)OEt. The configuration was elucidated by using a number of 1H NMR techniques. In 9, the ethoxy ligand could be easily and quantitatively exchanged for another monodentate ligand to give complex 12. Tetradentate N2S2-calix[4]arene ligand 15 formed the rhenium complex 16 either via reaction with ReO(PPh3)2Cl3 in an organic solvent or by reaction with rhenium gluconate in an aqueous solution. Complex 16 showed good stability in phosphate-buffered saline solution (37 degrees C, 5 d). The crystal structures of a mono- and a bimetallic complex were determined. The bimetallic N2O2-calixarene complex dimer 11 crystallized in the monoclinic space group C2/c, with a = 38.963(5) A, b = 23.140(6) A, c = 27.382(6) A, beta = 128.456(10) degrees, V = 19,333(7) A3, Z = 8, and final R = 0.0519. The monometallic N2S2 model complex 17 crystallized in the monoclinic space group Cc, with a = 15.715(2) A, b = 12.045(2) A, c = 20.022(3) A, beta = 94.863(12) degrees, V = 3776.3(10) A3, Z = 4, and final R = 0.0342.     

Synthesis and characterization of novel rhenium(V) tetradentate N2O2 Schiff base monomer and dimer complexes

Several rhenium(V) oxo complexes with tetradentate N(2)O(2) Schiff base ligands were synthesized and characterized. The general synthetic procedure involved reaction of [NBu(4)][ReOCl(4)] with a tetradentate Schiff base ligand (L(1) = N,N'-ethylenebis(acetylacetoneimine), (acac(2)en) or L(2) = N,N'-propylenebis(acetylacetoneimine) (acac(2)pn)) in ethanol solution to generate complexes of the form trans-ReOX(L) where X = Cl(-), MeO(-), ReO(4)(-), or H(2)O. The product isolated from the reaction was found to be dependent on the reaction conditions, in particular the presence or absence of water and/or base. The mu-oxo-Re(2)O(3)(L)(2) dimers were synthesized and characterized for chemical and structural comparison to the related monomers. Conversion of the monomer to its dimer analogue was followed qualitatively by spectrophotometry. The complexes were characterized by (1)H and (13)C NMR, UV-vis, and IR spectroscopy, elemental analysis, and single crystal X-ray diffraction. The crystallographic data reported for the structures are as follows: trans-[ReO(OH(2))(acac(2)en)]Cl (H(20)C(12)ClN(2)O(4)Re) 1, triclinic (Ponemacr;), a = 7.2888(6) A, b = 9.8299(8) A, c = 10.8195(9) A, alpha = 81.7670(10) degrees, beta = 77.1510(10) degrees, gamma = 87.6200(10) degrees, V = 747.96(11) A(3), Z = 2; trans-[ReO(OReO(3))(acac(2)en)] (H(18)C(12)N(2)O(7)Re(2)) 2, monoclinic (P2(1)/c), a = 7.5547(4) A, b = 8.7409(5) A, c= 25.7794(13) A, beta = 92.7780(10) degrees, V = 1700.34(16) A(3), Z = 4; trans-[ReOCl(acac(2)pn)] (H(20)C(13)N(2)O(3)ClRe) 3, monoclinic (P2(1)/c), a = 8.1628(5) A, b = 13.0699(8) A, c = 28.3902(17) A, beta = 97.5630(10) degrees, V = 3002.5(3) A(3), Z = 8; trans-[ReO(OMe)(acac(2)pn)] (H(23)C(14)N(2)O(4)Re) 4, monoclinic (P2(1)/c), a = 6.7104(8) A, b = 27.844(3) A, c = 8.2292(9) A, beta = 92.197(2) degrees, V = 1536.4(3) A(3), Z = 4; trans-[mu-oxo-Re(2)O(3)(acac(2)en)(2)] (H(36)C(24)N(4)O(7)Re(2)) 5, monoclinic (P2(1)/n), a = 9.0064(5) A, b = 12.2612(7) A, c = 12.3695(7) A, beta = 90.2853(10) degrees, V = 1365.94(13) A(3), Z = 2; and trans-[mu-oxo Re(2)O(3)(acac(2)pn)(2)] (H(40)C(26)N(4)O(7)Re(2)) 6, monoclinic (P2(1)/n), a = 9.1190(5) A, b = 12.2452(7) A, c = 12.8863(8) A, beta = 92.0510(10) degrees, V = 1438.01(14) A(3), Z = 2.     

Synthesis and Pyrolytical Studies of New Oxorhenium(V) Complexes with a Tetraaza Macrocyclic Ligand

5,12-dioxa-7,14-dimethyl-1,4,8,11-tetraazacyclotetradeca-1,8-diene (N₄L) reacts with the starting oxorhenium(V) complex, H₂[ReOCl₅], to yield either mononuclear [ReO(N₄L)(OH₂)]Cl₃, or dinuclear [Re₂O₃(N₄L)₂]Cl₄·2H₂O depending on the concentration of hydrochloric acid in rhenium complex. The reaction of (N₄L) mixed with KSCN or PPh₃ with the oxorhenium(V) complex in 6N HCl, yielded the mononuclear complexes [ReO(N₄L)(SCN)]Cl₂·H₂O and [ReO(N₄L)(PPh₃)]Cl₃·H₂O respectively. Both complexes have an octahedral configuration. These complexes decompose through several isolable, as well as non-isolable, intermediates during heating. [Re₂O₃(N₄L\)₂] (N₄L\ = dianionic tetradentate ions), [ReO(N₄L)Cl]Cl₂ and [ReO(N₄L\)(SCN)], were synthesized pyrolytically in the solid state from the corresponding rhenium(V) complexes. All have octahedral configurations. The ligand (N₄L) behaves in these complexes either as a neutral tetradentate or dianionic tetradentate ligand towards the oxorhenium ions. All complexes and the corresponding thermal products were isolated and their structures were elucidated by elemental analyses, conductance, IR and electronic absorption spectra, magnetic moments, ¹H NMR and TG-DSC measurements as well as by mass spectroscopy.     

The synthesis, structural, and spectroscopic characterization of uranium(IV) perrhenate complexes

We report the synthesis, structural, and spectroscopic characterization of a series of uranium(IV)-perrhenato complexes. Three isostructural complexes with general formula [U(ReO4)4(L)4] (where L = tri-n-butylphosphine oxide/TBPO (2), triethyl phosphate/TEP (3), or tri-iso-butyl phosphate/TiBP (4)), have been synthesized, both through the photoreduction of ethanolic {UO2}2+ solutions and also via a novel U(IV) starting material, U(ReO4)4.5H2O (1). Compound 1 has also been used in the preparation of [U(ReO4)4(TPPO)3(CH3CN)].2CH3CN (5) and [U(ReO4)(DPPMO2)3(OH)][ReO4]2.2CH3CN (6), where TPPO represents triphenylphosphine oxide and DPPMO2 represents bis(diphenylphosphino)methane dioxide. All six complexes have been spectroscopically characterized using NMR, UV-vis-NIR, and IR techniques, with 2, 3, 5, and 6 also fully structurally characterized. The U atoms in compounds 2-6 all exhibit eight-coordinate geometry with up to four perrhenate groups in addition to three (DPPMO2 and TPPO) or four (TEP, TiBP, TBPO) coordinated organic ligands. In the case of compounds 5 and 6, the coordination of eight ligands to the U(IV) center is completed by the binding of a solvent molecule (CH3CN) and OH-, respectively. Solid-state physical analysis (elemental and thermogravimetric) and infrared spectroscopy are in agreement with the structural studies. The crystallographic data suggest that the strength of the U(IV)-O-donor ligand bonds decreases across the series R3PO > [ReO4]- > (RO)3PO. Solution-state IR and 31P NMR spectroscopy appear to be in agreement with these solid-state results.     

Oxorhenium(V) complexes with the non-sulfur-containing amino acid histidine

Equivalent amounts of ReOX(3)(OPPh(3))(Me(2)S) (where X = Cl, Br) and L-histidine (L-hisH) in acetonitrile yield ReOX(2)(L-his), in which the amino acid monoanion is N,N,O-tridentate. X-ray diffraction work on both compounds shows that the three donors occupy a face in a distorted octahedron and the carboxylate oxygen is coordinated trans to the Re=O bond. The 2:1 complex [ReO(L-his)(2)]I is obtained by reacting 2 equiv of L-histidine with ReO(2)I(PPh(3))(2) in methanol in the presence of NaOCH(3). (1)H NMR spectroscopy indicates that these complexes contain one N,N,O-tridentate histidine anion coordinated as above and one N,N-bidentate histidine anion, whose carboxylate group is free. By refluxing ReOX(2)(L-his) in methanol, the carboxylic groups esterify and two octahedral units condense into an oxo-bridged dinuclear complex [ReOX(2)(L-hisMe)](2)O containing N,N-bidentate histidine methyl ester. The O=Re-O-Re=O backbone is approximately linear, and the two ReOX(2)(L-hisMe) units are related by a 2-fold axis through the central oxygen. Crystals of [ReOBr(2)(L-hisMe)](2)O consist of an ordered phase containing two of the possible diastereoisomers in a 1:1 ratio. (1)H NMR spectra of these crystals include two sets of signals, consistent with the presence of two isomers with C(2) symmetry, and the spectra of the nonrecrystallized material confirm that these are the only two isomers formed.     

Rhenium complexes with 2-(diphenylphosphinomethyl)aniline: formation of a cyclic, trinuclear oxorhenium(V) core

Reactions of 2-(diphenylphosphinomethyl)aniline, H(2)L(2), with (NBu(4))[ReOCl(4)] yield different oxo rhenium(V) complexes depending on the conditions applied. This comprises monomeric compounds such as [ReOCl(3)(H(2)L(2))] (1), [ReOCl(2)(OMe)(H(2)L(2))] (2), or [ReO(2)(H(2)L(2))(2)]Cl (5) as well as the dimeric μ-oxo complex [{ReOCl(2)(H(2)L(2))}(2)]O] (3) and the oxo-bridged trimer [{ReOCl(H(2)L(2))}O](3) (4). The latter compound represents the first example of a hitherto unknown trinuclear, cyclic oxo(V) core. [{ReOCl(H(2)L(2))}O](3) contains a tensed 6-membered metallacycle, which readily undergoes rearrangements and reactions with additional ligands. Compounds of the compositions 5 and [ReO(2)(H(2)L(2))(H(2)L(1))]Cl (6) were isolated either from the decomposition of 4 in CH(2)Cl(2)/n-pentane or from reactions with 2-(diphenylphosphino)aniline, H(2)L(1).     

Structural Features of Monomeric Octahedral d2-Rhenium(V) Monooxo Complexes with Oxygen Atoms of Tridentate Chelating (O,P,O and O,P,N) Ligands

Russian Journal of Coordination Chemistry - The structural features of eleven mononuclear octahedral d2-Re(V) monooxo complexes with tridentate chelating (O,P,O and O,P,N) ligands, [ReO $$\left(...     

Investigation of the reactivity of arylamines, organo-hydrazines and tolylisocyanate towards [PW12-xMxO40]n- Keggin anions

Reaction of K7[A,alpha-PW9Mo2O39] with Na2MoO4.2H2O in a mixture of water/dioxane/hydrochloric acid and further precipitation with (Bu4N)Br provided (Bu4N)3[A,alpha-PW9Mo3O40](3). Analogous reaction with K7-xNax[alpha-PW11O39] is an alternative to the synthesis of (Bu4N)3[alpha-PW11O39{MoVIO}]2. Multinuclear NMR and ESI mass spectrometry have been used to interpret the reaction of (Bu4N)x[alpha-PW11O39{ReO}](x=3 1; x=4 1I), (Bu4N)x[alpha-PW11O39{MoO}](x=3 2; x=4 2I) and (Bu4N)3[A,alpha-PW9Mo3O40]3 by organohydrazines, arylamines, tolylisocyanate and tetraphenylphosphine imide.     

Reactivity of rhenium(V) oxo Schiff base complexes with phosphine ligands: rearrangement and reduction reactions

The symmetric rhenium(V) oxo Schiff base complexes trans-[ReO(OH2)(acac2en)]Cl and trans-[ReOCl(acac2pn)], where acac2en and acac2pn are the tetradentate Schiff base ligands N,N'-ethylenebis(acetylacetone) diimine and N,N'-propylenebis(acetylacetone) diimine, respectively, were reacted with monodentate phosphine ligands to yield one of two unique cationic phosphine complexes depending on the ligand backbone length (en vs pn) and the identity of the phosphine ligand. Reduction of the Re(V) oxo core to Re(III) resulted on reaction of trans-[ReO(OH2)(acac2en)]Cl with triphenylphosphine or diethylphenylphosphine to yield a single reduced, disubstituted product of the general type trans-[Re(III)(PR3)2(acac2en)]+. Rather unexpectedly, a similar reaction with the stronger reducing agent triethylphosphine yielded the intramolecularly rearranged, asymmetric cis-[Re(V)O(PEt3)(acac2en)]+ complex. Reactions of trans-[Re(V)O(acac2pn)Cl] with the same phosphine ligands yielded only the rearranged asymmetric cis-[Re(V)O(PR3)(acac2pn)]+ complexes in quantitative yield. The compounds were characterized using standard spectroscopic methods, elemental analyses, cyclic voltammetry, and single-crystal X-ray diffraction. The crystallographic data for the structures reported are as follows: trans-[Re(III)(PPh3)2(acac2en)]PF6 (H48C48N2O2P2Re.PF6), 1, triclinic (P), a = 18.8261(12) A, b = 16.2517(10) A, c = 15.4556(10) A, alpha = 95.522(1) degrees , beta = 97.130(1) degrees , gamma = 91.350(1) degrees , V = 4667.4(5) A(3), Z = 4; trans-[Re(III)(PEt2Ph)2(acac2en)]PF6 (H48C32N2O2P2Re.PF6), 2, orthorhombic (Pccn), a = 10.4753(6) A, b =18.4315(10) A, c = 18.9245(11) A, V = 3653.9(4) A3, Z = 4; cis-[Re(V)O(PEt3)(acac2en)]PF6 (H33C18N2O3PRe.1.25PF6, 3, monoclinic (C2/c), a = 39.8194(15) A, b = 13.6187(5) A, c = 20.1777(8) A, beta = 107.7730(10) degrees , V = 10419.9(7) A3, Z = 16; cis-[Re(V)O(PPh3)(acac2pn)]PF6 (H35C31N2O3PRe.PF6), 4, triclinic (P), a = 10.3094(10) A, b =12.1196(12) A, c = 14.8146(15) A, alpha = 105.939(2) degrees , beta = 105.383(2) degrees , gamma = 93.525(2) degrees , V = 1698.0(3) A3, Z = 2; cis-[Re(V)O(PEt2Ph)(acac2pn)]PF6 (H35C23N2O3PRe.PF6), 5, monoclinic (P2(1)/n), a = 18.1183(18) A, b = 11.580(1) A, c = 28.519(3) A, beta = 101.861(2) degrees , V = 5855.9(10) A(3), Z = 4.