Side-chain cholesteric liquid crystalline elastomers derived from a mesogenic crosslinking agent: I. Synthesis and mesomorphic properties

The synthesis of new side-chain cholesteric elastomers derived from a cholesteric monomer and mesogenic crosslinking agent is presented. The chemical structures of the monomers obtained were confirmed by elemental analyses, FT-IR, ¹H NMR, and ¹³C NMR. The mesomorphic properties and thermal stability were investigated by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), polarizing optical microscopy (POM), and X-ray diffraction (XRD) measurements. M₁ showed cholesteric phase, and M₂ displayed enantiotropic nematic phase and monotropic smectic phase. The elastomers containing less than 12 mol% of the crosslinking units revealed reversible mesomorphic phase transition, wide mesophase temperature ranges, and high thermal stability.     

Synthesis and characterization of side-chain cholesteric elastomers derived from an isosorbide crosslinking agent

New liquid crystalline monomer 4-(4-ethoxybenzoyloxy)biphenyl-4′-[(10-undecylen-1-yloxy)-4′-ethoxy]benzoate (M ₁ ), chiral crosslinking agent isosorbide di-(10-undecylen-1-yloxybenzoate) (M ₂ ), and the corresponding elastomers were prepared. The chemical structures of M ₁ and M ₂ were characterized by Fourier transform infrared and ¹H-nuclear magnetic resonance. The mesomorphic properties and phase behavior were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy, and X-ray diffraction measurements. M ₁ exhibited typical threaded texture and droplet texture of nematic phase. The use of chiral crosslinking agent in the polymer networks could induce cholesteric phase. The elastomers containing less than 10 mol% of the chiral crosslinking units showed elasticity, reversible phase transition, wide mesophase temperature ranges, and high thermal stability. For the elastomers P ₂ –P ₄ , the glass transition temperature (T _g) increased; clearing temperature (T _i) and mesophase temperature range (ΔT) decreased with increasing content of the crosslinking unit.     

Mesomorphic properties of side-chain cholesteric liquid-crystalline elastomers

New monomer cholesteryl 4-(10-undecylen-1-yloxybenzoyloxy)-4′-ethoxybenzoate (M₁), crosslinking agent biphenyl 4,4′-bis(10-undecylen-1-yloxybenzoyloxy-p-ethoxybenzoate) (M₂) and a series of side-chain cholesteric elastomers were prepared. The chemical structures of the monomers and elastomers obtained were confirmed by element analyses, FT-IR, and ¹H NMR. The mesomorphic properties and thermal stability were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy, and X-ray diffraction measurements. The influence of the content of the crosslinking unit on the phase behavior of the elastomers was examined. M ₁ showed cholesteric phase, and M ₂ displayed nematic phase. The elastomers containing less than 12 mol% of the crosslinking units revealed reversible mesomorphic phase transition, wide mesophase temperature ranges, and high thermal stability.     

Studies on thermotropic liquid crystalline elastomers. II. Synthesis and properties of liquid crystalline polyester elastomers

Three series of novel thermotropic liquid crystalline polyester elastomers (TLCPEEs) were prepared by direct polycondensation from terephthalic acid, polyols (M_n = 1000 or 2000), and various diols. The structures and thermal properties of the synthesized TLCPEEs were examined by FTIR spectroscopy, differential scanning calorimetry, thermal optical polarized microscopy, thermogravimetric analysis, and wide-angle x-ray diffraction. The effects of kinds and amount of diols and the molecular weight of polyols on the thermal properties of TLCPEEs were studied. By introducing long flexible spacers (PE-1000 or PE-2000) into the polymer main chain, all polymers showed two-phase morphology under the thermal optical microscopic observation. All of the synthesized polymers, except polymer P1-BPA60 and P2-BPA60, which were prepared from BPA, exhibited thermotropic liquid crystalline properties that were in the smectic phase. © 1995 John Wiley & Sons, Inc.     

Polysiloxane side-chain liquid crystalline polymers prepared by alkyne hydrosilylation

We describe in this work an alkyne-hydrosilylation approach to synthesize a series of novel polysiloxane sidechain LCPs attaching end-on or side-on mesogenic side groups. Their properties are characterized by NMR, FTIR, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, polarized optical microscopy and small-angle X-ray scattering. These obtained alkenylsilane linked novel LCPs exhibit higher glass transition temperatures and clearing points, and especially display the tendency of forming smectic phases, in strong contrast with the nematic phases of their comparative conventional alkylsilane linked analogues, which manifests more rigid features of the alkenylsilane linkages and their significant influence on the mesomorphic properties.     

Studies on thermotropic liquid crystalline polyurethanes. II. Synthesis and properties of liquid crystalline polyurethane elastomers

Three series of novel thermotropic liquid crystalline polyurethane elastomers (TLCPUEs) were studied. Hard segments were formed by using hexamethylene diisocyanate (HDI) reacted with a mesogenic unit, benzene-1,4-di(4-iminophenoxy-n-hexanol), which also acted as a chain extender. Three diols: 1,10-decanediol,poly(oxytetramethylene) glycol (PTMEG) M _n = 1000 and PTMEG M _n = 2000 were used as the soft segments. The effects of soft segments of polyurethanes on the liquid crystalline behavior were studied. Higher molecular weight TLCPUEs were obtained by adding 30?50 mol % of mesogenic segments to diisocyanates. In contrast to a conventional chain extender such as 1,2-ethylene glycol or 1,4-butyl glycol, the synthesized polyurethane elastomers exhibited a mesophase transition by using a mesogenic unit as the chain extender. Mesophase was found for all synthesized LC polyurethanes except of polymers H2-A-12 and H2-A-7. The structures and the thermal properties of all synthesized TLCPUEs were studied by using FTIR spectroscopy, wide-angle x-ray diffraction (WAXD) and DSC measurements, a polarizing microscope equipped with a heating stage, dynamic mechanical analysis (DMA), and thermogravimetric analysis (TGA). Mechanical properties were also examined by using a tensilemeter. © 1995 John Wiley & Sons, Inc.     

Phase behavior of liquid crystalline elastomers based on a tri-vinyl mesogenic cross-linker

A series of cross-linked liquid crystalline polymers are prepared by graft copolymerization, and their liquid crystalline properties are characterized by DSC and POM. The results show that low levels of cross-linking do not obviously affect the phase behavior of the network polymers; in contrast, high levels of cross-linking may have more drastic influences, and liquid crystalline phases may lose, and more marked variation in phase transition will occur in materials with more direct coupling through a shorter or stiffer coupling chain between mesogenic side units and polymer backbone. At the same time, the coupling between the polymer chain and sidegroups results in stress-induced orientation in LCEs.     

Side-chain cholesteric liquid crystalline polymers containing menthol and cholesterol—synthesis and characterization

A series of new cholesteric side-chain liquid crystalline polymers were prepared containing cholesteric monomer and nonmesogenic chiral monomer. All polymers were synthesized by graft polymerization using polymethylhydrosiloxane as backbone. The mesomorphic properties were investigated by differential scanning calorimetry, polarizing optical microscopy and X-ray diffraction measurements, and temperature-changing solidistic optical rotation. The chemical structures of the monomers and polymers obtained were confirmed by Fourier transform infrared and proton nuclear magnetic resonance spectra. M₁ showed cholesteric phase during the heating and the cooling cycle. Polymer P₁ were chiral smectic A phase, whereas P₂–P₇ were cholesteric phase. Experimental results demonstrated that nonmesogetic chiral moity offered the possibility of application because of its lower glass-transition temperature, and the glass-transition temperatures and isotropization temperatures reduced, and the ranges of the mesophase temperature changed abruptly at first and then smoothly with increasing the content of chiral agent.     

Synthesis and thermal properties of side-chain liquid crystalline polyethers with racemic and chiral backbone

Racemic and chiral [(4-cyano-4′-biphenyl)oxy] and [(4-methoxy-4′-biphenyl)oxy]methyloxiranes were prepared from racemic epichlorohydrin or racemic and chiral glycidols and polymerized in dimethylsulfoxide (DMSO) with Bu^tOK as the initiator system. Initial phase identifications were made by differential scanning calorimetry (DSC) and optical microscopy techniques and confirmed by X-ray diffraction measurements. Upon heating, all the monomers show only a crystal–isotropic phase transition. The racemic and chiral [(4-cyano-4′-biphenyl)oxy]methyloxiranes exhibit a nematic and a cholesteric monotropic phase, respectively. Methoxybiphenyl substituted polyethers are crystalline and insoluble in virtually all common solvents. Cyanobiphenyl substituted polyethers are soluble under the same experimental conditions and show enantiotropic liquid crystalline properties. The racemic polymer exhibits a nematic phase, while the optically active polymer forms a cholesteric phase.     

Studies on thermotropic liquid crystalline elastomers. I. Synthesis and properties of poly (amide-ester) elastomers

Three series of novel poly(amide-ester) (PAE) elastomers were prepared by direct poly-condensation from terephthalic acid (TPA), polyols (M_n = 1000 or 2000), and various diamines. The structures and thermal properties of the synthesized PAEs were examined by FTIR spectroscopy, wide angle X-ray diffraction (WAXD), differential scanning calo-rimetry (DSC), thermal optical polarized microscopy, thermogravimetric analysis (TGA), and dynamic mechanical analysis (DMA). The effects of kinds and amount of diamines and the molecular weight of polyols on the thermal properties of PAEs were studied. By introducing long flexible spacers (PE-1000 or PE-2000) into the polymer main chain, all polymers showed two-phase morphology under the thermal optical microscopic observation. It was interesting that most of the synthesized polymers exhibited only one melting transition corresponding to the soft segments. The melting transition of hard segments could not be detected due to decomposition of the soft segments. However, a thermotropic liquid crystalline PAE (TLCPAE) prepared from methylhydroquinone and 2-chloro-5-methyl-phenylenediamine with PE-1000 could be obtained by lowering the melting transition temperature of the hard segment. © 1995 John Wiley & Sons, Inc.     

近红外电致变色胆甾相液晶高分子的设计、合成及旋光开关性质

通过单体4′-甲氧基苯基-4-烯丙氧基苯甲酸酯(M1)、(S)-(-)-N-(5-己烯基)-6-(4′-(2-甲基丁氧基)苯基)-蒽醌-2,3-二羧酸酰亚胺(M2)与聚甲基氢硅氧烷间的硅氢加成反应,制得了3个新的具有近红外电致变色性质的侧链型液晶共聚物(PC5A10,PC5A20CB,PC5A30CB),并对其液晶性,电化学,光谱电化学和旋光开关性质进行了表征.当M2单体的含量为10mol%,20mol%时,共聚物可形成胆甾相液晶,而当其含量为30mol%时,所能形成的液晶相为近晶A相.3个共聚物的循环伏安曲线均出现了两对可逆的氧化还原峰,分别对应于蒽醌酰亚胺基团得电子而形成自由基阴离子和二价阴离子.中性态时,共聚物在420nm处有较强吸收,而当被还原为自由基阴离子后,在近红外区域840nm出现了新的强烈的吸收.以聚合物为阴极电致变色层,普鲁士蓝为离子储存层的全固态电致变色器件在800nm有较好的光学调制性.此外,本文还就该器件的电化学调控手性光开关性质进行了初步研究.     

Densely crosslinked liquid single-crystal elastomers

A series of liquid single-crystal elastomers (LSCE) with different crosslinking densities were synthesized. The influence of the crosslinking density on the macroscopic properties (e.g. swelling, thermoelastic behavior and birefringence) and the phase behavior was studied. It is shown that densely crosslinked duromers are available which possess no clearing temperature and exhibit relatively high birefringence at high temperature.     

Synthesis and properties of liquid crystalline polyurethanes

Liquid crystalline polyurethanes were prepared from 4,4′-bis(2-hydroxyethoxy)biphenyl (BHBP) and 2,4-tolylene diisocyanate (TDI). The effect of partial replacement of BHBP by 25–75 mol % poly(oxytetramethylene) diol (PTMO, M _n = 250) on the liquid crystalline properties was studied. The BHBP/TDI/PTMO polyurethanes were obtained by one- and two-step polyaddition. The polyurethanes were investigated by DSC, polarizing microscopy, x-ray, and IR spectroscopy. The molecular weight distribution was determined by GPC. The morphology of the polymers was investigated by the SALS method. Thermogravimetric investigations of the polyurethanes were also performed. All polyurethanes containing BHBP units have liquid crystalline properties. Partial replacement of BHBP by PTMO-250 considerably changes the phase transition temperatures and the range of mesophase occurrence. More homogeneous polyurethanes were obtained, if the two-step polyaddition method was applied. The polyaddition method affects the phase transition temperatures. © 1993 John Wiley & Sons, Inc.     

Synthesis and characterization of liquid crystalline polyacrylates and non-liquid crystalline polypyrroles from bifunctional monomers

Two kinds of polymerizations of liquid-crystalline N-{{W-{4-[4-(11-acryloyloxy)undecanoxybenzoyl]biphenyleneoxy}alkyl}}pyrrole gave a side-chain liquid-crystalline polyacrylate containing pyrrole group and a non-liquid crystalline polypyrrole containing acrylate group. Liquid crystallinity was determined by DSC and optical polarizing microscope measurements. The monomers having hexyl or decyl group as the alkyl group exhibited an undefined smectic, smectic B, and smectic A phases on the heating stage. The radically polymerized polyacrylate derivatives containing the pyrrole group showed smectic A, smectic C, and undefined smectic phases on the cooling stage. On the other hand, soluble N-substituted polypyrrole derivatives containing the terminal acrylate group which were prepared by chemical oxidative polymerization by ferric chloride catalyst did not show liquid crystallinity. Structure analysis of the polypyrroles performed by ¹H and ¹³C-NMR and FT-IR spectroscopies demonstrated that the polymerization occurred at the pyrrole ring. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3877–3887, 1999     

Synthesis and characterization of fluorine-containing cholesteric liquid crystalline polysiloxanes bearing trifluoromethyl-substituted mesogens

A series of side-chain liquid crystal (LC) polysiloxanes were synthesised with Poly(methylhydrogeno)siloxane, 4?-(undec-10-enoyloxy) biphenyl – 4 – yl 4- (trifluoromethyl) benzoate (M_th) and a chiral nematic (N*) LC monomer 1-allyl 10-(cholesteryl)-decanedioate (M_ch). The chemical structures and LC properties of the monomers and polymers were characterised by FTIR, ¹H-NMR, differential scanning calorimetry, thermogravimetric analysis, POM and X-ray diffractometer. M_ch is monotropic N* LC. The homopolymer derived from monomer M_ch is enantiotropic N* LC. Monomer M_th is a smectic A liquid crystal. The copolymers derived from M_ch and M_th are N* LCs. The temperatures at which 5% weight loss occurred are greater than 300°C for all the fluoro-containing polymers, and the residue weights of the samples at 600°C increased slightly as the content of trifluoromethyl mesogens increased in the polymers. The glass transition temperatures of the polymers increased as trifluoromethyl mesogens increased, too. The N*–I phase transition temperatures show a negative deviate from ideal or linear behaviour. The values of the enthalpy changes for the cholesteryl containing polymers are rather low and this is attributed to the biaxiality of cholesteryl moiety which tends to reduce the change in the orientational order at the N*–I transition. Compared to the monomers, the polymers show wider mesophase region.     

Synthesis and characterization of liquid crystalline elastomers bearing fluorinated mesogenic units and crosslinking mesogens

Several new side‐chain liquid crystalline (LC) polysiloxanes and elastomers ( IP ‐ VIP ) bearing fluorinated mesogenic units and crosslinking mesogens were synthesized by a one‐step hydrosilylation reaction with poly(methylhydrogeno)siloxane, a fluorine‐containing LC monomer 4′‐undec‐10‐enoyloxy‐biphenyl‐4‐yl 4‐fluoro‐benzoate and a crosslinking LC monomer 4′‐(4‐allyloxy‐benzoxy)‐biphenyl‐4‐yl 4‐allyloxy‐benzoate. The chemical structures and LC properties of the monomers and polymers were characterized by use of various experimental techniques such as FTIR, ¹H‐NMR, EA, TGA, DSC, POM and XRD. The effect of crosslinking mesogens on mesomorphic properties of the fluorinated LC polymers was studied as well. The obtained polymers and elastomers were soluble in many solvents such as toluene, tetrahydrofuran, chloroform, and so forth. The temperatures at which 5% weight loss occurred (T_d) were greater than 250°C for all the polymers, and the weight of residue near 600°C increased slightly with increase of the crosslinking mesogens in the fluorinated polymer systems. The samples IP , IIP , IIIP and IVP showed both smectic A and nematic phases when they were heated and cooled, but VP and VIP exhibited only a nematic mesophase. The glass transition temperature (T_g) of polymers increased slightly with increase of crosslinking mesogens in the polymer systems, but the mesophase–isotropic phase transition temperature (T_i) and smectic A–nematic mesophase transition temperature (T_S‐N) decreased slightly. It suggests that the temperature range of the mesophase became narrow with the increase of crosslinking mesogens for all the fluorinated polymers and elastomers. In XRD curves, the intensity of sharp reflections at low angle decreased with increase of crosslinking mesogens in the fluorinated polymers systems, indicating that the smectic order derived from fluorinated mesogenic units should be destroyed by introduction of more crosslinking mesogens. Copyright © 2008 John Wiley & Sons, Ltd.     

Side chain cholesteric liquid crystalline elastomers: synthesis and phase behaviour

A series of new side chain cholesteric liquid crystalline elastomers (P-2–P-6) containing the nematic crosslinking monomer 4-(10-undecen-1-yloyloxy)benzoyl-4′-allyloxybenzoyl-p-benzenediol bisate (M-1) and the cholesteric monomer 4-cholesteryl 4-(10-undecen-1-yloyloxy)benzoate (M-2) were synthesized. The chemical structures of the monomers and elastomers obtained were confirmed by FTIR and ¹H NMR spectroscopy. Their liquid crystalline properties and phase behaviour were investigated by differential scanning calorimetry, polarizing optical microscopy and X-ray diffraction. The effect of the crosslinking units on phase behaviour is discussed. Elastomers containing less than 20?mol?% of the crosslinking units showed elasticity, reversible phase transitions and cholesteric Grandjean texture. The experimental results demonstrated that the glass transition and isotropization temperatures of P-2–P-6 increased with the increasing concentration of crosslinking unit M-1.     

Side chain cholesteric liquid crystalline elastomers: synthesis and phase behaviour

A series of new side chain cholesteric liquid crystalline elastomers (P-2-P-6) containing the nematic crosslinking monomer 4-(10-undecen-1-yloyloxy)benzoyl-4'-allyloxybenzoyl-p-benzenediol bisate (M-1) and the cholesteric monomer 4-cholesteryl 4-(10-undecen-1-yloyloxy)benzoate (M-2) were synthesized. The chemical structures of the monomers and elastomers obtained were confirmed by FTIR and ¹H NMR spectroscopy. Their liquid crystalline properties and phase behaviour were investigated by differential scanning calorimetry, polarizing optical microscopy and X-ray diffraction. The effect of the crosslinking units on phase behaviour is discussed. Elastomers containing less than 20 mol % of the crosslinking units showed elasticity, reversible phase transitions and cholesteric Grandjean texture. The experimental results demonstrated that the glass transition and isotropization temperatures of P-2-P-6 increased with the increasing concentration of crosslinking unit M-1.     

Synthesis and characterization of side chain cholesteric liquid crystalline elastomers derived from chiral bisolefinic crosslinking units

In this work we prepared a nematic monomer (4′‐allyloxybiphenyl 4′‐ethoxybenzoate, M₁ ), a chiral crosslinking agent (isosorbide 4‐allyloxybenzoyl bisate, M₂ ) and a series of new side chain cholesteric liquid crystalline elastomers derived from M₁ and M₂ . The chemical structures of the monomers and polymers were confirmed by FTIR and ¹H NMR spectroscopy. The mesomorphic properties were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy and X‐ray diffraction. The effect of the content of the crosslinking unit on phase behaviour of the elastomers is discussed. Polymer P₁ showed a nematic phase, P₂ –P₇ showed a cholesteric phase; P₆ formed a blue Grandjean texture over a broad temperature range 145–209.6°C, with no changed on the cooling. Polymers P₄ –P₇ , with more than 6?mol?% of chiral crosslinking agent, gave rise to selective reflection. Elastomers containing less than 15?mol?% of the crosslinking units displayed elasticity, reversible phase transition with wide mesophase temperature ranges, and high thermal stability. Experimental results demonstrated that, with increasing content of crosslinking agent, the glass transition temperatures first fell and then increased; the isotropization temperatures and mesophase temperature ranges decreased.     

Synthesis and characterization of side chain cholesteric liquid crystalline elastomers derived from chiral bisolefinic crosslinking units

In this work we prepared a nematic monomer (4'-allyloxybiphenyl 4'-ethoxybenzoate, M₁), a chiral crosslinking agent (isosorbide 4-allyloxybenzoyl bisate, M₂) and a series of new side chain cholesteric liquid crystalline elastomers derived from M₁ and M₂. The chemical structures of the monomers and polymers were confirmed by FTIR and ¹H NMR spectroscopy. The mesomorphic properties were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy and X-ray diffraction. The effect of the content of the crosslinking unit on phase behaviour of the elastomers is discussed. Polymer P₁ showed a nematic phase, P₂-P₇ showed a cholesteric phase; P₆ formed a blue Grandjean texture over a broad temperature range 145-209.6°C, with no changed on the cooling. Polymers P₄-P₇, with more than 6 mol % of chiral crosslinking agent, gave rise to selective reflection. Elastomers containing less than 15 mol % of the crosslinking units displayed elasticity, reversible phase transition with wide mesophase temperature ranges, and high thermal stability. Experimental results demonstrated that, with increasing content of crosslinking agent, the glass transition temperatures first fell and then increased; the isotropization temperatures and mesophase temperature ranges decreased.