Synthesis of cyclic polybutadiene via ring-opening metathesis polymerization: the importance of removing trace linear contaminants

The synthesis of cyclic polybutadienes using ring-opening metathesis polymerization (ROMP) was accomplished. A cyclic Ru alkylidene catalyst, where a terminal ligand was covalently linked to the Ru alkylidene, was used to polymerize either 1,5-cyclooctadiene (COD) or 1,5,9-trans-cis-trans-cyclododecatriene (CDT). Trace amounts of an acyclic impurity, 4-vinylcyclohexene, found in the COD led to samples which were contaminated with linear polymer. In contrast, CDT, which was free of the impurity, afforded pure cyclic polymer. These results provide a convenient method for discerning samples of pure cyclic polymer from those which contain trace to large amounts of linear polymer. Furthermore, they emphasize the need to use monomers that are free of acyclic impurities when preparing cyclic polymers using ROMP.     

Suspension ring-opening metathesis polymerization: the preparation of norbornene-based resins for application in organic synthesis

A series of norbornene-based resin beads were obtained by aqueous suspension ring-opening metathesis polymerization (ROMP) and used as polymeric supports for organic synthesis. These resins were prepared from norbornene, norborn-2-ene-5-methanol, and cross-linkers such as bis(norborn-2-ene-5-methoxy)alkanes, di(norborn-2-ene-5-methyl)ether, and 1,3-di(norborn-2-ene-5-methoxy)benzene. The resulting unsaturated ROMP (U-ROMP) resins containing olefin repeat units were chemically modified using hydrogenation, hydrofluorination, chlorination, and bromination reactions to produce saturated ROMP resins with different chemical and physical properties. The hydrogenated ROMP (H-ROMP) resin was found to be highly resistant to acidic, basic, Lewis acid, and Birch reduction conditions and was assessed as a polymeric support in a series of solid-phase synthetic applications. The H-ROMP resin was found to have superior performance compared to polystyrene-divinylbenzene (PS-DVB) copolymers in aromatic nitration and acylation reactions. In a conventional five-step solid-phase synthesis of a hydantoin, similar results were obtained for both the H-ROMP and PS-DVB resins. The U-ROMP resin was also shown to be effective in the solid-phase syntheses of benzimidazoles and benzimidazolones.     

Detailed study of the ring-opening metathesis polymerization of norbornene bearing a five- or six-membered ring cyclic carbonate along with volume expansion

The ring-opening metathesis polymerization (ROMP) of norbornene derivatives bearing five- or six-membered cyclic carbonate ( 2 or 3 ) was carried out with a typical ruthenium catalyst [bis(tricyclohexylphosphine)benzylidene ruthenium(IV) dichloride], the so-called first-generation Grubbs catalyst, under various reaction conditions, to smoothly obtain the corresponding polyalkenamers ( 5 and 6 ) along with volume expansion. The number-average molecular weights (M_n's), 10% weight loss decomposition temperatures, glass-transition temperatures (T_g's), and volume expansion ratios of the resulting products depended on the polymerization conditions. The degree of volume expansion was mainly affected by M_n, T_g, and the cis/trans configuration of the exocyclic double bonds of the resulting polymers. The volume expansion was confirmed to specifically occur during the polymerization of the monomer bearing cyclic carbonate moieties, and similar ROMPs of monomers without cyclic carbonate, such as norbornene itself, the monomer 5,5-bis(methoxymethyl)bicyclo[2.2.1]hept-2-ene, and the monomer endo-N-methylbicyclo[2.2.1]hept-5-ene-2,3-dicarboxylimide, proceeded along with volume shrinkage. Furthermore, an investigation of another type of polymerization, a vinyl-type one, of monomer 2 suggested that the volume expansion specifically took place in the ring-opening type of polymerization. In addition, the Sc(OTf)₃-mediated cationic ring-opening reaction of the cyclic carbonate moiety of polyalkenamer 5 smoothly proceeded along with volume expansion or nearly zero volume shrinkage to yield the corresponding networked polymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 395–405, 2006     

Tagging alcohols with cyclic carbonate: a versatile equivalent of (meth)acrylate for ring-opening polymerization

Cyclic carbonate monomers based on a single biocompatible scaffold allow for incorporation of a wide range of functional groups into macromolecules via ring-opening polymerization.     

Halohydroxylation of 1-cyclopropylallenes: an efficient and stereoselective method for the preparation of multisubstituted olefins

The halohydroxylation of 1-cyclopropylallenes would generate two multisubstituted C=C double bonds and at the same time stereoselectively gives 5-halohexa-3,5-dien-1-ols in moderate to good yields. The latter could be transformed into the corresponding alkynyl-substituted conjugated dienes through the further Sonogashira coupling.     

As low as reasonably achievable catalyst loadings in the cross metathesis of olefins with ethyl acrylate

A series of ruthenium catalysts for olefin metathesis have been screened in the cross metathesis of 1,9-decadiene with ethyl acrylate. Under optimized reaction conditions a catalyst loading of only 100 ppm in respect to double bonds was sufficient for complete conversion of the diene.     

A highly efficient and general method for the ring-opening of aziridines with various nucleophiles in DMSO

Ring-opening of aziridines with various nucleophiles (such as amines, thiols, and silylated nucleophiles) in DMSO under mild conditions without any catalyst afforded the corresponding products in good to excellent yields.     

A simple empirical method for the estimation of activation energies in radical molecule metathesis reactions

Several new empirical methods are presented for the prediction of activation energies E of the metathetical transfer reaction of single bonded atoms in radical-molecule reactions of the type A· + BC → AB + C· The methods assign additive contributions to E for the endgroups A· and C·, neglecting the effect of the transferred atom B. Most of the predicted values agree to within l kcal mol^?1 with the experimental activation energies (average error = 0.82 and standard deviation = 1.02 kcal mol^?1). This is comparable to the best of the more complex schemes available for such estimation.     

Organocatalysts for the controlled "immortal" ring-opening polymerization of six-membered-ring cyclic carbonates: a metal-free, green process

Six-membered cyclic carbonates, namely trimethylene carbonate (TMC), 3,3-dimethoxytrimethylene carbonate (DMTMC) and 3-benzyloxytrimethylene carbonate (BTMC), undergo controlled "immortal" ring-opening polymerization (iROP) under mild conditions (bulk, 60-150 °C), by using organocatalysts, including an amine [4-N,N-dimethylaminopyridine (DMAP)], a guanidine [1,5,7-triazabicyclo-[4.4.0]dec-5-ene (TBD)], or a phosphazene [2-tert-butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2-diazaphosphorine (BEMP)], in the presence of an alcohol [benzyl alcohol (BnOH), 1,3-propanediol (PPD), glycerol (GLY)] that acts as both a co-initiator and a chain-transfer agent. Remarkably, such organocatalysts remain highly active in the iROP of technical-grade, unpurified TMC. Under optimized conditions, as much as 100,000 equivalents of TMC were fully converted by as little as 10 ppm of BEMP with the simultaneous growth of as many as 200 polymer chains, allowing the preparation of high molar mass poly(trimethylene carbonate)s (up to 45,800 g mol(-1)). These catalyst systems enable among the highest activities (TOF=55,800 h(-1)) and productivities (TON=95,000) ever reported for the ROP of TMC.     

Interrupted energy transfer: highly selective detection of cyclic ketones in the vapor phase

We detail our efforts toward the selective detection of cyclic ketones, e.g. cyclohexanone, a component of plasticized explosives. Thin films comprised of a conjugated polymer are used to amplify the emission of an emissive receptor via energy transfer. We propose that the energy transfer is dominated by an electron-exchange mechanism to an upper excited state of the fluorophore followed by relaxation and emission to account for the efficient energy transfer in the absence of appreciable spectral overlap. Exposure to cyclic ketones results in a ratiometric fluorescence response. The thin films show orthogonal responses when exposed to cyclic ketones versus acyclic ketones. We demonstrate that the exquisite selectivity is the result of a subtle balance between receptor design and the partition coefficient of molecules into the polymer matrix.     

Comparison of different ruthenium-alkylidene bonds in the activation step with N-heterocyclic carbene Ru-catalysts for olefins metathesis

Density functional theory calculations have been used to investigate the activation steps involving three of the most used alkylidene groups in Ru-catalysts for olefins metathesis. Specifically, we compared the benzylidene, the indenylidene and a phosphonium alkylidene groups. Calculations reveal that the benzylidene and the indenylidene groups behave rather similarly, despite their structural differences. The phosphonium alkylidene group seems to have the most favourable activation pathway.     

A very simple method to synthesize nano-sized manganese oxide: an efficient catalyst for water oxidation and epoxidation of olefins

Nano-sized particles of manganese oxides have been prepared by a very simple and cheap process using a decomposing aqueous solution of manganese nitrate at 100 °C. Scanning electron microscopy, transmission electron microscopy and X-ray diffraction spectrometry have been used to characterize the phase and the morphology of the manganese oxide. The nano-sized manganese oxide shows efficient catalytic activity toward water oxidation and the epoxidation of olefins in the presence of cerium(iv) ammonium nitrate and hydrogen peroxide, respectively.     

Catalysis design for ring-opening polymerization of cyclic esters: 1. Group 1 metal and thallium(I) trispyrazolylborate complexes with hemilabile ligands

The synthesis of 3-(2-methoxy-1,1-dimethylethyl)pyrazole, pz*H is described together with its reactions with the borohydrides MBH(4), where M = Li, Na, and K, under melt conditions. At 180 degrees C, this procedure leads to a mixture of products for M = Li, and at higher temperatures, a derivative LiTp'pz*H, 1, is isolated, wherein a B-H bond and a methyl group have been eliminated and a B-O bond has been formed. For M = Na, the reaction proceeds to give the tris-pyrazolylborate derivative NaTp*, 2, but at higher temperatures the tetra-pyrazolylborate complex NaB(pz*)(4), 3, is obtained. The reactions involving KBH4 and pz*H yield the dinuclear complex K(2)(Tp*)(2)pz*H, 4. The reaction between NaTp* and TlOAc in CH(2)Cl(2) at room temperature leads to the formation of TlTp*, 5, along with NaOAc. Thallium 5 reacts with methyllithium in diethylether to give LiTp*, 6, and thallium metal, and, similarly, 5 and KH react in tetrahydrofuran to give KTp*, 7 and Tl(0). 1-7 have been characterized by elemental analysis, NMR spectroscopy, and by single-crystal X-ray studies, the latter of which reveal the versatile modes of binding for this new ligand bearing hemilabile ether appendages.     

Synthesis, structural characterization and reactivity of aluminium complexes supported by benzotriazole phenoxide ligands: air-stable alumoxane as an efficient catalyst for ring-opening polymerization of L-lactide

Aluminium complexes bearing sterically bulky benzotriazole-phenoxide ligands are synthesized and characterized structurally. The reaction of 2-(2H-benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol ((CMe2Ph)BTP-H) or 2-(2H-benzotriazol-2-yl)-4,6-di-tert-butylphenol ((t-Bu)BTP-H) with AlMe(3) (1.2 molar equiv.) in toluene yields [((CMe2Ph)BTP)AlMe(2)] (1) or [((t-Bu)BTP)AlMe(2)] (2) as a four-coordinated monomeric aluminium complex. Compound 1 reacts further with (CMe2Ph)BTP-H in a stoichiometric proportion, affording penta-coordinated monomeric aluminium methyl complex [((CMe2Ph)BTP)(2)AlMe] (3). Complex 3 is also obtained directly upon treatment of AlMe(3) with (CMe2Ph)BTP-H (two molar equiv.) in refluxing toluene in high yield. In the presence of H(2)O (half a molar equiv.), hydrolysis of 3 in a mixed solvent of THF and toluene at ambient temperature affords [{((CMe2Ph)BTP)(2)Al}(2)(μ-O)] (4), in which the oxo ligand acts as a chelating group linearly bridging two aluminium centers. Air-stable alumoxane 4 is an efficient catalyst for the ring-opening polymerization of L-lactide (L-LA) in the presence of 9-anthracenemethanol (9-AnOH). Complex 4 catalyzes the polymerization of L-LA in a controlled manner, yielding PLLAs with the expected molecular weights and narrow polydispersity indices (PDIs).     

Peroxophosphotungstate held in an ionic liquid brush: an efficient and reusable catalyst for the dihydroxylation of olefins with H2O2 in neat water

A reusable heterogeneous catalytic assembly of [PO₄{WO(O₂)₂}₄]^3? held in an ionic liquid brush was synthesized and an environmentally friendly procedure was developed for the dihydroxylation of several olefins with 30 wt% H₂O₂. These reactions were conducted in neat water under mild conditions without any organic co‐solvent or other additive. Several factors that affect the dihydroxylation were investigated in detail. The catalyst is easily recovered after the reaction via simple filtration, and can be reused at least eight times without a noticeable loss of activity. The experimental results demonstrate that this dihydroxylation process has no apparent scale‐up effect. Copyright © 2014 John Wiley & Sons, Ltd.     

Magnesium bistrifluoromethanesulfonimide as an efficient catalyst for the hydroalkylation of aromatic olefins with 1,3-diketones under solvent-free conditions

An efficient magnesium bistrifluoromethanesulfonimide[Mg(NTf_2)_2]catalyzed hydroalkylation of aromatic olefins with 1,3- diketones under solvent-free conditions has been developed.The reactions proceed smoothly to give the desired products in good yields in short reaction times.     

The crucial roles of guest water in a biocompatible coordination network in the catalytic ring-opening polymerization of cyclic esters: a new mechanistic perspective

The ring-opening polymerization (ROP) of cyclic esters/carbonates is a crucial approach for the synthesis of biocompatible and biodegradable polyesters. Even though numerous efficient ROP catalysts have been well established, their toxicity heavily limits the biomedical applications of polyester products. To solve the toxicity issues relating to ROP catalysts, we report herein a biocompatible coordination network, CZU-1, consisting of Zn₄(μ₄-O)(COO)₆ secondary building units (SBUs), biomedicine-relevant organic linkers and guest water, which demonstrates high potential for use in the catalytic ROP synthesis of biomedicine-applicable polyesters. Both experimental and computational results reveal that the guest water in CZU-1 plays crucial roles in the activation of the Zn₄(μ₄-O)(COO)₆ SBUs by generating μ₄-OH Brønsted acid centers and Zn–OH Lewis acid centers, having a synergistic effect on the catalytic ROP of cyclic esters. Different to the mechanism reported in the literature, we propose a new reaction pathway for the catalytic ROP reaction, which has been confirmed using density functional theory (DFT) calculations, in situ diffuse reflectance IR Fourier transform spectroscopy (DRIFTS), and matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy (MALDI-TOF MS). Additionally, the hydroxyl end groups allow the polyester products to be easily post-modified with different functional moieties to tune their properties for practical applications. We particularly expect that the proposed catalytic ROP mechanism and the developed catalyst design principle will be generally applicable for the controlled synthesis of biomedicine-applicable polymeric materials.

A new ring-opening polymerization mechanism is unveiled based on synergistic catalysis involving Brønsted and Lewis acid centers in a coordination framework.     

Flavin-catalyzed generation of diimide: an environmentally friendly method for the aerobic hydrogenation of olefins

The first green and practical method for "aerobic hydrogenation" involving the use of hydrazine and an organocatalyst is described. Olefins can be hydrogenated by treatment with hydrazine in the presence of a 5-ethyl-3-methyllumiflavinium perchlorate (FlEt+.ClO4-) catalyst under O2 atmosphere to give the corresponding hydrogenated products in excellent yields along with environmentally benign water and molecular nitrogen as the only waste products.