CL-20热分解反应机理的ReaxFF分子动力学模拟

为探究固相CL-20热分解反应机理,本文采用反应分子动力学ReaxFF MD模拟研究了含有128个CL-20分子的超胞模型在800–3000 K温度下的热分解过程。借助作者所在课题组研发的反应分析及可视化工具VARxMD得到了热分解过程中多种反应中间物和较为全面的反应路径。氮氧化物是CL-20初始分解的主要中间产物,其中NO₂是数量最多的初始分解产物,观察到的中间物NO₃的生成量仅次于NO₂。统计CL-20初始分解的所有反应后发现,在所有考察温度下CL-20初始分解路径主要是N―NO₂断裂反应和C―N键断裂引起开环的单分子反应路径。N―NO₂断裂反应数量在高温下显著增多,而C―N键断裂引起的开环反应数量随温度升高变化不大。在低温热分解模拟中还观察到CL-20初始分解阶段生成的NO₂会发生双分子反应—从CL-20分子中夺氧生成NO₃。对CL-20热分解过程中环结构演化进行分析后发现,CL-20分解的早期反应中间物主要为具有3元或2元稠环结构的吡嗪衍生物,随后它们会分解形成单环吡嗪。吡嗪六元环结构在热分解过程中非常稳定,这一模拟结果支持Py-GC/MS实验中提出吡嗪存在的结论。CL-20中的咪唑五元环结构相对不稳定,在热分解过程中会发生开环分解而较早消失。由ReaxFF MD模拟得到的3000 K高温热分解产物N₂,H₂O,CO₂和H₂的数量与爆轰实验的测量结果定量吻合。本文获得的对CL-20热分解机理的认识表明ReaxFF MD结合VARxMD有可能为深入了解热刺激下含能材料复杂化学过程提供一种有前景的方法。     

高压下β-HMX热分解机理的ReaxFF反应分子动力学模拟

采用ReaxFF反应分子动力学方法研究了不同压缩态β-HMX晶体(ρ=1.89、2.11、2.22、2.46、2.80、3.20 g·cm^-3)在T=2500 K时的热分解机理, 分析了压力对初级和次级化学反应速率的影响、高压与低压下初始分解机理的区别以及造成反应机理发生变化的原因. 发现HMX的初始分解机理与压力(或密度)相关. 低压下(ρ<2.80 g·cm^-3)以分子内反应为主, 即N－NO₂键的断裂、HONO的生成以及分子主环的断裂(C－N键的断裂). 高压下(ρ≥2.80 g·cm^-3)分子内反应被显著地抑制, 而分子间反应得到促进, 生成了较多的O₂、HO等小分子和大分子团簇. 初始分解机理随压力的变化导致不同密度下的反应速率和势能也有所不同. 本文在原子水平对高压下HMX反应机理的深入研究对于认识含能材料在极端条件下的起爆、化学反应的发展以及爆轰等具有重要意义.     

CL-20/TNT共晶炸药的分子动力学研究

运用分子动力学(MD)方法,选择凝聚态分子势能优化力场(COMPASS),对六硝基六氮杂异伍兹烷(ε-CL-20)、2,4,6-三硝基甲苯(TNT)晶体及其等摩尔比的CL-20/TNT混合炸药和共晶炸药进行不同温度下恒定粒子数等压等温(NPT)系综模拟研究.结果表明,CL-20/TNT共晶的内聚能密度(CED)和结合能随温度的升高逐渐减小;共晶的CED比混合炸药的大,结合能是混合炸药的2倍多,预示其稳定性明显增强.对相关函数和局部放大结构显示共晶中组分分子间作用主要来自TNT中H和CL-20中O以及CL-20中H和TNT中O之间形成的氢键.通过波动法求得的弹性力学性能结果表明,CL-20/TNT共晶的拉伸模量(E)、体积模量(K)和剪切模量(G)介于ε-CL-20和TNT晶体之间,且随温度的升高而下降,符合一般预期;但共晶炸药的柯西压(C12-C44,Cij弹性系数)、K/G和泊松比(ν)均比其组分炸药ε-CL-20和TNT高得多,预示该共晶具有异常高的延展性和弹性伸长,主要是二组分呈层状交替排列且之间存在较强相互作用所致.     

界面水分子扩散对超高分子量聚乙烯摩擦学性能影响的反应分子动力学模拟研究

采用基于反应力场(ReaxFF)的分子动力学模拟方法,研究了摩擦界面水分子向超高分子量聚乙烯(UHMWPE)基体扩散和渗透的基本过程.分子模拟结果表明：摩擦过程中,水分子稳定吸附在Fe板表面,并与聚乙烯链形成分子内摩擦,使聚乙烯分子产生剪切变形.当Fe板表面存在纳尺度外凸结构时,其在UHMWPE表面的耕犁作用更为显著,使摩擦界面的内摩擦力显著增加.当摩擦速度增加时,摩擦界面原子温度显著升高.在水润滑条件下,界面水分子逐渐扩散到UHMWPE基体中,引起相邻聚乙烯链之间的原子距离增加,这导致聚乙烯链之间的相互作用强度降低.此外,摩擦界面处还伴随着水分子中氢氧键断裂,并引起相应原子的电荷跃变.此时,水氧原子与Fe原子形成Fe―O化合物,且具有与Fe₂O₃相似的晶体结构.水分子扩散进入UHMWPE内时,还引起其周围聚乙烯分子的电荷发生改变,造成UHMWPE表层原子电荷分布不均匀.     

CL20/DNB共晶的热感度分子动力学研究

共晶技术大幅提高了六硝基六氮杂异伍兹烷（CL20）的热稳定性而且保留了CL20高爆速、高爆压等特性.为了研究CL20/1,3-硝基甲苯（DNB）共晶的热感度降低的原因,采用ReaxFF/lg反应力场模拟CL20/DNB共晶、CL20/TNT共晶、CL20单晶以及DNB单晶系统的热分解过程.研究发现： CL20/DNB共晶的热感度低于CL20/TNT共晶和CL20单晶的热感度,但高于DNB单晶的热感度.通过分析CL20单晶和CL20/DNB共晶的初始反应路径,揭示了共晶有效降低CL20热感度的机理.CL20/DNB共晶和CL20热分解具有相似的主要产物,NO₂、NO₃、N₂、N₂O₂、HNO、H₂O、CO₂和HONO等,通过反应动力学分析得到CL20/DNB共晶和CL20的活化能.     

径向电场对纳米管中水分子通量的影响

水分子在纳米通道中的运动对于生命活动、纳米器件的设计等都有着重要的意义. 现在已经证实, 在(6,6)的碳纳米管中, 水分子会以单分子水链的形式协同通过碳纳米管. 但是如何控制水分子的流量仍然是一个困难的课题. 本文研究了在径向电场作用下, 碳纳米管中水分子通量的变化趋势和碳纳米管的开关行为.发现在碳纳米管两端存在200 MPa的压力差时, 电场强度从1 V·nm^-1增加到3 V·nm^-1, 水分子通量线性减小. 当径向电场强度增加到3 V·nm^-1时, 碳纳米管处于关闭状态, 水分子无法通过碳纳米管. 进一步, 我们发现水偶极与碳纳米管管轴夹角的平均值的概率分布和翻转频率都与水分子在纳米管中的个数有很大关系.     

三维氧化铁/石墨烯的构建及其对CL-20的热分解性能的影响

High-performance solid propellants are very important for the development of modern weapons. Aside from their high energy and high burning rate, safety performance is regarded as the most important factor that should be considered whenever a new solid propellant recipe is formulated. Therefore, exploring a new type of combustion catalyst that can improve both catalytic activity and reduce the sensitivity of the energetic component is significant. Traditionally, transition metals or metal oxides are used as a combustion catalyst for accelerating the thermal decomposition of energetic components. However, the existing problem of these catalysts is the aggregation of particles accompanied by poor surface area. Coupling metal oxides with graphene is a promising approach to obtain a binary composite with stable structure and large specific surface area. In this work, rod-like and granular Fe₂O₃ nanoparticles were synthesized using a hydrothermal method. Then, the two as-prepared Fe₂O₃ nanoparticles were coupled with graphene sheets using an interfacial self-assembly method, which can effectively prevent the aggregation of Fe₂O₃ particles and simultaneously increase the active sites that participate in the reaction. X-ray diffraction and X-ray photoelectron spectroscopy were used to identify the phase states and chemical compositions of the prepared samples. The morphology and internal structures were further demonstrated through scanning electron microscopy, transmission electron microscopy and nitrogen adsorption-desorption tests. Both phase analysis and structure identification indicate that the prepared Fe₂O₃/G has high purity and high surface area. The catalytic performance of the prepared Fe₂O₃ and Fe₂O₃/G in the thermal decomposition of hexanitrohexaazaisowurtzitane (CL-20) was evaluated based on thermal gravimetric analysis-infrared spectroscopy (TGA-IR) and differential scanning calorimetry (DSC) tests. The non-isothermal decomposition kinetics of CL-20, Fe₂O₃/CL-20, and Fe₂O₃/G/CL-20 were further studied by DSC. The results reveal the excellent catalytic activity of Fe₂O₃/G in the thermal decomposition of CL-20, which is attributed to the presence of abundant pore structure and large surface area. The reaction mechanisms of the exothermic decomposition process of CL-20, Fe₂O₃/CL-20, and Fe₂O₃/G/CL-20 were obtained by the logical choice method, and the composites all followed same mechanism function model as CL-20. Through comparison, the rod-like Fe₂O₃ coupled with graphene was found to have the best catalytic activity in the thermal decomposition of CL-20. Thus, the rod-like Fe₂O₃ and its Fe₂O₃/G composite were used to investigate their influence on the impact sensitivity of CL-20 by fall hammer apparatus. The results show that rFe₂O₃/G can effectively decrease the impact sensitivity of CL-20 compared with pure CL-20 and rFe₂O₃/CL-20. Therefore, rFe₂O₃ coupled with graphene not only promotes the thermal decomposition but also improves the safety performance of CL-20.     

CL-20/HMX共晶及其为基PBX界面作用和力学性能的MD模拟研究

为提高共晶炸药的实际使用价值, 改善其安全性和力学性能, 以CL-20/HMX共晶炸药为基, 分别添加2种高聚物粘结剂Estane 5703(聚氨基甲酸乙酯)和HTPB(端羟基聚丁二烯), 共构建两种共晶基高聚物粘结炸药(PBX)模型, 进行细致的295 K NPT分子动力学(MD)模拟研究. 通过两种PBX模型及其与该共晶炸药的MD模拟结果比较表明, 与基炸药之间的结合能Estane 5703大于HTPB, 预示含少量Estane 5703的PBX稳定性和相容性更佳; 对相关函数g(r)揭示粘结剂与基炸药界面相互作用的方式, 以基炸药中H分别与Estane 5703中羰基O和HTPB中端羟基O之间的氢键较强. 与CL-20/HMX共晶炸药相比, 少量粘结剂Estane 5703或HTPB的加入, 使弹性系数C_ij下降, 拉伸模量(E)、体积模量(K)和剪切模量(G)均显著减小, 而泊松比(ν), 柯西压(C₁₂－C₄₄)和K/G值明显增大, 表明PBXs体系刚性减小, 延展性增强, 力学性能大为改善. 少量粘结剂包覆使PBXs致钝, 主要归因于其隔热、吸热并使体系变“软”的缓冲作用, 而界面作用造成的分子结构引发键键长变化变为次要因素.     

纳米铜粉对高氯酸铵热分解的影响

The decomposition behaviour of ammonium perchlorate (AP) has been investigated in the presence of Cu nanopowder by DTA. The results show that nanometer Cu powder decreased the first and second thermal decomposition temperature of AP by 35.1 ℃ and 130.2 ℃, respectively, and the DTA heat release of AP in the presence of Cu nanopowders increased to 1.20 kJ·g^-1, showing good catalytic effect on the thermal decomposition of AP. The catalytic effect of Cu micron-size powder on the thermal decomposition of AP was less than that of Cu nanopowder. With the increase in content, Cu nanopowder enhanced its catalytic effect on the high temperature decomposition of AP, however, it weakened its catalytic effect on the low temperature decomposition of AP. The mechanism of catalysis for the thermal decomposition of AP is as follows: (1) metal oxider acts as the intermedium in the process of election tranfer, (2) Cu nanopowder reacts with the decomposed product of AP, (3) Cu nanopowder has special surface effect.     

三维氧化铁/石墨烯的构建及其对CL-20的热分解性能的影响（英文）

首先采用水热法合成了两种不同形貌的氧化铁(棒状rFe₂O₃和颗粒状pFe₂O₃),然后采用界面自组装法制备了两种具备高比表面积和三维网状结构的氧化铁与石墨烯的复合物(rFe₂O₃/G和pFe₂O₃/G)。通过X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电镜(TEM)和X射线光电子能谱(XPS)对样品的相态、组成及结构性质进行确证。根据热重-红外联用分析(TGA-IR)和差式扫描量热法(DSC)测试对所制备的催化剂对CL-20的催化热分解活性进行评估。通过逻辑选择法对Cl-20、Fe2O3/Cl-20和Fe2O3/G/CL-20的非等温热分解动力学进行系统研究发现,其均遵循相同的机理函数模型。对比分析表明,棒状氧化铁/石墨烯复合物(rFe₂O₃/G)对CL-20的热分解表现出最佳的催化活性。以rFe₂O₃及rFe     

Reactive Molecular Dynamics Simulation on Thermal Decomposition of n-Heptane

The thermal decomposition of n-heptane is an important process in petroleum industry. The theoretical investigations show that the main products are C₂H₄, H₂, CH₄, and C₃H₆, which agree well with the experimental results. The products populations depend strongly on the temperature. The quantity of ethylene increases quickly as the temperature goes up. The conversion of n-heptane and the mole fraction of primary products from reactive molecular dynamic and chemical kinetic modeling are compared with each other. We also investigated the pre-exponential factor and activation energy for thermal decomposition of n-heptane by kinetic analysis from the reactive force field simulations, which were extracted to be 1.78×10¹⁴ s^-1 and 47.32 kcal/mol respectively.     

[Pb2(TNR)2(CHZ)2(H2O)2]4H2O的结构及热分解机理

The coordination compound of [Pb 2(TNR) 2(CHZ) 2(H 2O) 2]•4H 2O was prepared by using the aqueous solution of carbohydrazide, lead nitrate and sodium styphnate. The molecular structure of [Pb 2(TNR) 2(CHZ) 2(H 2O) 2]•4H 2O(C 7H 13 N 7O 12 Pb, Mr=594.43) was determined by using a single crystal diffraction analysis .The thermal decomposition mechanism of the title compound was studied by TGDTG, DSC and IR techniques. The crystal belongs to monoclinic with space group P2 1/n.The unit cell parameters are as follows: a=0.64700(10)nm, b=1.6074(3)nm, c=1.4883(3)nm,β=97.42(2)°,V=1.5349(5)nm3, Z=2, DC=2.572g•cm -3 ,μ(Mo, Kα)=11.080cm -1 , F(000)=1128. R=0.0422, Rw=0.0735. The binuclear lead coordination compound is bridged by two carbohydrazide molecules. The molecule has a symmetrical center. TNR 2- ,CHZ and H 2O coordinate with the central ions simultaneously.     

RDX及其衍生物高温热解的反应分子动力学模拟

本文采用ReaxFF反应分子动力学方法,研究了RDX及其衍生物晶体在高温条件下(2000、2500和3000 K)的热分解机理以及主要产物随时间的变化情况。结果表明:RDX及其衍生物晶体热解的第一步反应均为N―NO_2键断裂生成NO_2分子,随后反应由于六元环上和侧链基团的不同导致侧链脱除或开环反应的顺序不同。在这四种单胞体系热解中,NO_2和NO分子为共同的中间产物,形成之后迅速发生次级反应并最终生成N_2。各体系热解终产物一致,均为N_2、H_2O和CO_2,其中N_2分子数最多,大于20个。由于原始分子结构和组成中C/N比、H/O比的不同,各体系热解后H_2O和CO_2分子数目相差较大。不同温度下,各单胞体系热分解生成的最大含碳团簇中C原子数均较小。在进一步超胞体系的模拟中,RDX和RDX-D2体系生成的含碳团簇中C原子数分别达到约30和16个,远高于单胞模拟,且受温度影响较大;而RDX-D1和RDX-D3单胞或超胞模拟结果相近,均未生成含碳团簇,仅存在小分子含碳碎片。因此,初始分子的结构和元素比对含碳团簇的生成有明显影响。     

Thermal decomposition of Cu(NO3)2·3H2O at reduced pressures

Thermolysis of Cu(NO₃)₂·3H₂O is studied by means of XRD analysis in situ and mass spectral analysis of the gas phase at P=1/10 Pa at low heating rate. It is shown that stage I of the dehydration (40-80 °C) results in the consecutive appearance of crystalline Cu(NO₃)₂·2.5H₂O and Cu(NO₃)·H₂O. Anhydrous Cu(NO₃)₂ formed during further dehydration at 80-110 °C is moderately sublimed at 120-150 °C. Dehydration is accompanied by thermohydrolysis, leading to the appearance of Cu₂(OH)₃NO₃ and gaseous H₂O, HNO₃, NO₂, and H₂O. The higher pressure in the system, the larger amount of thermohydrolysis products is observed. The formation of the crystalline intermediate CuO_x(NO₃)_y was observed by diffraction methods. Final product of thermolysis (CuO) is formed at 200-250 °C.     

3-硝基邻苯二甲酸锆的制备﹑热分解机理及非等温反应动力学

用3-硝基邻苯二甲酸、氢氧化钠和硝酸氧锆为原料, 制备了3-硝基邻苯二甲酸锆, 采用元素分析、X射线荧光衍射和FT-IR对其结构进行了表征. 用TG-DTG以及变温固相原位反应池/傅里叶变换红外光谱(RSFT-IR)联用技术研究了3-硝基邻苯二甲酸锆的热分解机理, 对主分解反应的DTG峰进行了数学处理, 计算得到了动力学参数和动力学方程. 结果表明, 3-硝基邻苯二甲酸锆的分解反应总共有4个阶段, 其中主分解反应发生在第2阶段, 主分解反应的表观活化能Ea与指前因子A分别为158.84 kJ·mol-1和10^9.85 s-1, 主分解阶段的反应机理服从一级Mample法则, 主分解反应的动力学方程为dα/dt=10^9.85(1-α)e^-1.91×10⁴/T.