Differential elution of sodium or potassium dihydrogen- and hydrogenphosphate ions from a sephadex G-15 column with sodium or potassium chloride solution

When a mixed solution of sodium or potassium dihydrogenphosphate and disodium or dipotassium hydrogenphosphate was eluted from a Sephadex G-15 column with either a sodium or potassium chloride solution, the elution profiles of ions showed that the hydrogenphosphate ion was eluted more rapidly than the dihydrogenphosphate ion. When the sample solutions containing potassium dihydrogenphosphate and/or dipotassium hydrogenphosphate, all of which were supplemented with phosphorus-32-labelled potassium dihydrogenphosphate, were eluted with sodium chloride solution, the elution profiles of radioactivity showed that the dihydrogenphosphate ion changed to hydrogenphosphate ion and vice versa, depending on the pH values of the sample solution and the availability of the cation of the eluent during elution for the phosphate ion to pair with.     

Hexakis(melaminium) tetrakis(dihydrogenphosphate) monohydrogenphosphate tetrahydrate

The crystal structure of the new melaminium salt, hexa­kis(2,4,6‐tri­amino‐1,3,5‐triazin‐1‐ium) tetrakis­(di­hydrogenphos­phate) mono­hydrogenphosphate tetrahydrate, 6C₃H₇N₆⁺·4H₂PO₄^?·HPO₄^2?·4H₂O, is built up from singly protonated melaminium residues, di­hydrogenphosphate and mono­hydrogen­phosphate anions, and water mol­ecules. The melaminium residues are interconnected by four N—H?N hydrogen bonds, forming chains along the [001] direction. These chains of melaminium residues form stacks aligned along [100]. The di­hydrogenphosphate anions interact with the mono­hydrogenphosphate anions via the H atoms and, together with hydrogen‐bonded dimers of the water mol­ecules, develop layers parallel to the (010) plane. The oppositely charged moieties interact via multiple N—H?O hydrogen bonds that stabilize the stacking structure.     

Two caesium vanadium hydrogenphosphates with tunnelled structures: Cs2V2O3(PO4)(HPO4) and Cs2[(VO)3(HPO4)4(H2O)]·H2O

Dicaesium divanadium trioxide phosphate hydrogenphosphate, Cs₂V₂O₃(PO₄)(HPO₄), (I), and dicaesium tris[oxidovanadate(IV)] hydrogenphosphate dihydrate, Cs₂[(VO)₃(HPO₄)₄(H₂O)]·H₂O, (II), crystallize in the monoclinic system with all atoms in general positions. The structures of the two compounds are built up from VO₆ octahedra and PO₄ tetrahedra. In (I), infinite chains of corner‐sharing VO₆ octahedra are connected to V₂O₁₀ dimers by phosphate and hydrogenphosphate groups, while in (II) three vanadium octahedra share vertices leading to V₃O₁₅(H₂O) trimers separated by hydrogenphosphate groups. Both structures show three‐dimensional frameworks with tunnels in which Cs⁺ cations are located.     

Electrochemical determination of sulphide at multi-walled carbon nanotubes-dihexadecyl hydrogen phosphate composite film modified electrodes based on in situ synthesis of methylene blue

A novel electrochemical method for the determination of sulphide at a multi-walled carbon nanotube-dihexadecyl hydrogen phosphate composite film coated glassy carbon electrode （MWNTs-DHP/GCE） based on in situ synthesis of methylene blue （MB） was established. 2007 Sheng Shui Hu. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.     

Hydrogen-bond tuning of ferromagnetic interactions: synthesis, structure and magnetic properties of polynuclear copper(II) complexes incorporating p-block oxo-anions

The reaction of copper(II) hydroxide with 2,2'-bipyridine (bipy) (1 : 1) in alkaline aqueous solution (pH 14) at room temperature affords the alternating carbonate/hydroxo-bridged copper(II) polymeric chain compound {[Cu3(bipy)3(mu-OH)2(mu-CO3)2].11H2O}n, 1, as determined by single-crystal X-ray diffraction. The structure of 1 is built up from two similar centro-symmetric dinuclear [(bipy)Cu(mu-OH)]2 cores which link together via bridging carbonate groups to mononuclear [(bipy)Cu] fragments to form the chain. Interdigitation of adjacent chains through pi-pi interactions, which involve each bipy ligand, forms sheets that are separated by the water molecules of crystallisation. Variable-temperature magnetic susceptibility measurements have shown that 1 behaves as an isolated spin doublet with two non-interacting spin triplets with the magnetic coupling through the bis-mu-hydroxo bridges being strongly ferromagnetic in nature. The hydrothermal reaction of copper(II) hydroxide, bipy and ammonium hydrogenphosphate (pH 8) yields a dinuclear copper(II) complex of formula {[Cu2(bipy)2(mu-OH)2(HPO4)(H2O)].4H2O}, 2, as determined by single-crystal X-ray diffraction. The structure of consists of an asymmetric dinuclear bis-mu-hydroxo copper(II) core with a monodentate hydrogenphosphate dianion coordinating to one copper(II) atom (above) and a water molecule to the other (below). Intra- and inter-molecular hydrogen bond interactions involving the hydrogenphosphate, water molecules and bis-mu-hydroxo groups link adjacent dinuclear fragments into chains, which interdigitate to form sheets that are separated by the water molecules of crystallisation. The investigation of the magnetic properties of 2 showed that the strength of the ferromagnetic interaction through the bis-mu-hydroxo bridges is influenced by the significant out-of-plane displacement of the hydrogen atom of the hydroxo groups, brought about through hydrogen bonding to the hydrogenphosphate ligand, and yielded the strongest ferromagnetic coupling yet reported for the bis-mu-hydroxo copper(II) core.     

Ferroelastic n‐propyl­ammonium dihydrogenphosphate

n‐Propyl­ammonium di­hydrogenphosphate, C₃H₇NH₃⁺·­H₂PO₄^?, crystals are ferroelastic at room temperature. The phase transition into the prototypic phase takes place at approximately 378 K. All atoms except two H atoms are linked by the lost symmetry operations derived from the prototypic space group P2/b2₁/n2₁/a. Each of these two different H atoms is involved in an asymmetric hydrogen bond between an oxy­gen pair. Ferroelastic switching is concomitant with jumps of these H atoms from the donor to the acceptor O atoms. The compound belongs to the structural family of n‐alkyl­ammonium di­hydrogenphosphate and in particular to the structure type of pentyl­ammonium di­hydrogenphosphate, which differs by localization of alternating layers from the rest of the known alkyl­ammonium di­hydrogenphosphates. The crystal was slightly twinned; the proportion of the minor domain was approximately 3.5%.     

Mechanism of dehydration of ZnHPO4 · H2O

Thermal analyses under quasi-isothermal-isobaric conditions were used to follow the condensation reactions proceeding during the calcination of zinc hydrogenphosphate. Its calcination in an electric oven under isothermal conditions was adopted for preparation of the intermediates and the main product, which were analysed by chromatography, IR spectroscopy, NMR spectroscopy, X-ray analysis and electron microscopy.     

Effective recognition of H2PO4- by a new series of dendrimers functionalized with ferrocenyl-urea termini

A new series of dendrimers with poly(propylene imine) backbones and 4, 8, 16, or 32 peripheral ferrocenyl-urea groups were prepared and characterized; their voltammetric behavior in DMSO solution was very sensitive to the presence of hydrogenphosphate anions at submillimolar concentration levels.     

SURFACE METAL ION-IMPRINTED RESINS PREPARED BY EMULSIFIER-FREE EMULSION POLYMERIZATION USING PHOSPHORIC DIESTER AS FUNCTIONAL MONOMER

The uniform surface ion-imprinted resins for Zn2+ as the imprinting guest were prepared by emulsi fier-free emulsion polymerization utilizing ally phenyl hydrogenphosphate as a functional comonomer. The Zn2+-imprinted resin adsorbed Zn2+ much more effectively than did the unimprinted one. The selective feature of the surface imprinted resins to the template ions was demonstrated.     

Hydroxyapatite of platelet morphology synthesized by ultrasonic precipitation from solution

Hydroxyapatite (HA) synthesis by precipitation with urea from aqueous solutions of calcium nitrate and ammonium hydrogenphosphate is studied. Ultrasonication during the synthesis decreases the size of platelet HA crystals from several micrometers to 200–300 nm. At low calcium concentrations in solution, the crystallizing phase is carbonate-hydroxyapatite, whereas at high calcium concentrations, octacalcium phosphate (OCP) precedes hydroxyapatite crystallization.     

Heteroditopic ferrocene-based ureas as receptors for anions and cations

The synthesis of structurally new types of ferrocene-based ureas, in which the ferrocene moiety is simultaneously attached to two urea groups, have been prepared directly from 1,1-bis(isocyanato)ferrocene 1. Receptors 2a, 2b, and 2d show spectral and electrochemical anion-sensing capability for hydrogenphosphate and fluoride anions, in addition 2d also shows a sensing capability for acetate anion. Heteroditopic receptor 2a, bearing a pyridine binding site, does not complex Cu2+ cations but instead an intramolecular redox reaction takes place to give the oxidized form 2a+. The results obtained by using the heteroditopic receptor 2b, containing two crown ethers units, demonstrate that K+ cations can only be electrochemically detected in the presence of hydrogenphosphate anion. Whereas the new structural motif 2d, in which the two urea groups are part of the macrocycle framework, is a selective electrochemical sensor for Li+ cation in the presence of alkali metal ions. The preferred binding modes and their extent are proposed for the most representative complexes by means of DFT-based theoretical calculations.     

SURFACE METAL ION-IMPRINTED RESINS PREPARED BY EMULSIFIER-FREE EMULSION POLYMERIZATION USING PHOSPHORIC DIESTER AS FUNCTIONAL MONOMER

1.INTRODUCTIONMolecularimprintingtechnique,asaconceptdemonstratedfirstlybyWuffandhiscoworker[1],hasrecentlyemergedasatechniquefordevelopingspecialrecognitionofvarioustargetmaterials[2~6].Theresultantimprintedpolymerscontainaspecificrecognitionsitethatcanrecognizetheimprintingmoleculeandhenceexhibitahighselectivityforrebindingtheimprintingmolecule.Therecognitionsitescanbetailor-madebycopolymerizationofcross-linkingmonomersandfunctionalmonomerswithwhichinteractatargetmolecule.However,mostof…     

石墨炉原子吸收光谱法测定全血中铅的方法改进

针对不同的石墨管测定全血中铅时，用铅标准溶液制作的标准曲线和以全血为基体制作的标准工作曲线斜率的不一致，提出以磷酸氢二铵、磷酸氢二钠和硝酸铵作基体改进剂，以全血为基体制作标准工作曲线来测定全血中铅含量的方法。试验表明，此法基本消除了全血基体对血铅测定的影响，适应各种石墨管，可快速、准确地测定全血中铅。     

Molecular emission cavity analysis: Part IX. The simultaneous determination of sulphur anions in admixture

Conditions for the rapid simultaneous determination of eleven binary and six ternary mixtures of sulphur anions at the p.p.m. level are described, based on the sequential appearance of their S₂ emission peaks. The depressive effects of cations are removed by addition of phosphoric acid, pH 7.0 phosphate buffer or diammonium hydrogenphosphate as appropriate.     

高效液相色谱法和毛细管电泳法测定甘草制品中甘草酸的含量

分别用高效液相色谱法（ＨＰＬＣ）、毛细管区带电泳法（ＣＺＥ）、胶束电动毛细管色谱法（ＭＥＣＣ）测定了甘草制品中甘草酸的含量。对ＨＰＬＣ,ＣＺＥ,ＭＥＣＣ的分析条件作了一些选择实验,结果表明ＭＥＣＣ法与ＨＰＬＣ法分析数据接近、比较准确,而且前者比ＨＰＬＣ法分离效率高、溶剂用量少,是一种很有发展潜力的分析方法。     

Background electrolytes in 50% methanol/water for the determination of acidity constants of basic drugs by capillary zone electrophoresis

The acidic dissociation constants of several hydrophobic drugs, amiodarone and a series of antidepressants that show a secondary or tertiary amino group, were determined in a 50% methanol/water mixture by capillary zone electrophoresis. The electrophoretic behavior of buffers prepared from sodium acetate, tris(hydroxymethyl) aminomethane hydrochloride, sodium hydrogenphosphate, ammonium chloride, ethanolamine, butilammonium chloride, and sodium borate in the hydroalcoholic solution was tested. Thus, all of them follow the Ohm's law until about 25 kV and, therefore, they can be used without significant Joule heat dissipation at 20 kV. For the studied drugs, buffers prepared with phosphate or borate give effective mobility measurements lower than those from other buffers. The wide pKa range of the studied drugs provides a wide pH range where the protonated forms of the amino compounds coexist with hydrogenphosphate ions and where the neutral amines coexist with boric acid. The decrease of the experimental effective mobilities in these instances can be explained through the interactions between coexisting species. Therefore, phosphate and borate buffers should be avoided to determine the mobility of amines with aqueous pKa higher than 8, at least in solutions with high methanol content. Independent measurements of acidic dissociation constants of drugs validate this statement.     

Coupling of chromatographic ion-exchange reaction with change-partner reaction. Presumed mechanism on the ion-ion interaction of inorganic ions in Sephadex G-15 columns

A sample solution containing sodium or potassium dihydrogenphosphate or disodium or dipotassium hydrogenphosphate was eluted from a Sephadex G-15 column with either sodium or potassium chloride solution in various sample-eluent systems, and every one of the four kinds of ions employed was determined in the eluate. Then, the elution profiles showed the phenomenon that a negative peak of chloride ion coexisted in the fractions of a positive peak of phosphate ion, in all sample-eluent systems employed. This phenomenon was assumed to occur by the coupled reaction of change-partner and ion-exchange reactions including ion exclusion.     

Separation and determination of 4-(1,1,3,3-tetramethylbutyl)phenyl dihydrogenphosphate and di-[4-(1,1,3,3-tetramethylbutyl)phenyl] hydrogenphosphate by high-performance liquid chromatography

4-(1,1,3,3-Tetramethylbutyl)phenyl dihydrogenphosphate and di-[4-(1,1,3,3-tetramethylbutyl)phenyl] hydrogenphosphate (0.01–1 mg ml^-1) in aqueous phosphoric acid raffinates can be separated on a reversed-phase μ Bondapak C₁₈ column by gradient elution with methanol/water, and quantified at 267 nm. Raffinates are extracted with 4-methyl-2-pentanone; the two phosphates can then be determined with errors less than ±5%.     

Study on the thermal decomposition of solids in fluidized bed

Reliable thermodynamic parameters for the thermal decomposition of diammonium hydrogenphosphate [(NH₄)₂HPO₄] may be obtained using a fluidized bed. For the same size of particle, at the same temperature, but for different carrier gases, the rate constant and activation energy increase in the following order: air, methane, hydrogen. For the same carrier gas (air) the rate constant increases when the particle size decreases.     

Trialkyltin Compounds as Neutral Carriers for Anions in PVC Liquid Membranes and Complex Formation with Oxoanions

Under the influence of an electric field, trialkyltin compounds of the type R₃SnX behave as electrically neutral carriers for anions in poly(vinyl chloride) liquid membranes. The interaction of tinorganic compounds with oxoanions was studied in organic phase by means of ¹¹⁹Sn-NMR-monitored titrations. In the case of tributyltin chloride, no appreciable amount of complex was formed with hydrogensulfate, whereas dihydrogenphosphate gave rise to a new species. Dioctyltin dichloride and dioctyltin dioctyltin diacetate formed a 1:2 (salt/ligand) complex with hydrogenphosphate.