One-step synthesis of gold and silver hydrosols using poly(N-vinyl-2-pyrrolidone) as a reducing agent

Synthesis of gold and silver hydrosols was carried out in a one-step process by reduction of aqueous solutions of metal salts using poly(N-vinyl-2-pyrrolidone) (PVP). Both kinds of metal nanoparticles were obtained without the addition of any other reducing agent, at low temperatures and using water as the synthesis solvent. Shape, size, and optical properties of the particles could be tuned by changing the employed PVP/metal salt ratio. It is proposed that PVP acts as the reducing agent suffering a partial degradation during the nanoparticles synthesis. Two possible mechanisms are proposed to explain the reduction step: direct hydrogen abstraction induced by the metal ion and/or reducing action of macroradicals formed during degradation of the polymer. Initial formation of the macroradicals might be associated with the metal-accelerated decomposition of low amounts of peroxides present in the commercial polymer.     

Investigation on miscibility,thermal, crystallographic diffraction and dynamic-mechanical properties of poly(vinyl alcohol)/poly(vinylpyrrolidone)/zirconium phosphate nanocomposites

Journal of Thermal Analysis and Calorimetry - This work approaches the effects of a synthetic nanofiller on poly(vinyl alcohol)/poly(vinylpyrrolidone)/zirconium phosphate (PVA/PVP/ZrP)...     

Proton-conducting zirconium phosphate/poly(vinyl acetate)/glycerine gel electrolytes

This work reports on a proton gel electrolyte composed of zirconium phosphate (ZP) particles suspended in a poly(vinyl acetate)/glycerine matrix. The material was studied by X-ray powder diffraction, differential scanning calorimetry, impedance spectroscopy, and spectrophotometry. It had a proton conductivity of 1–0.1 mS/cm at room temperature and remained stable and transparent up to at least 110 °C; it therefore appears suitable for uses in electrochromic devices. The structure of the ZP powder and of the gel is discussed in terms of water removal from interplanar spaces by heating or exfoliation. It is suggested that an exfoliation of the layered structure of ZP by intercalation of glycerine produces a dispersion of ZP nanoparticles in the poly(vinyl acetate)/glycerine matrix.     

Flammability performance of poly(vinyl alcohol) nanocomposites with zirconium phosphate and layered silicates

Nanocomposites of poly(vinyl alcohol) with α-type zirconium phosphate (PVA/ZrP) and with layered silicates (montmorillonite and hectorite) were prepared by solution blending. Thermal properties and flame retardancy of the materials were characterized by thermogravimetric analysis and microscale combustion calorimetry. PVA/ZrP nanocomposite showed a faster charring process in temperature range between 200 and 350 °C but higher thermal stability and greater char yields above 350 °C and a different heat release rate feature, compared to clay-based samples. Observation of the micrographs of the chars from the nanocomposites present two distinct structures; one constituted by the stacked clay layers on the surface combined with clay-reinforced foams in the interior residue, and the other formed by carbon covered on the tightly curled ZrP nanoplatelets. The results indicated different flame retardant mechanisms of the two nanocomposites, which depend on the chemical/physical effects from the inherent properties of the nanofillers.     

Electrospinning and characterization of medium-molecular-weight poly(vinyl alcohol)/high-molecular-weight poly(vinyl alcohol)/montmorillonite nanofibers

Submicron fibers of medium-molecular-weight poly(vinyl alcohol) (MMW-PVA), high-molecular-weight poly(vinyl alcohol) (HMW-PVA), and montmorillonite clay (MMT) in aqueous solutions were prepared by electrospinning technique. The effect of HMW-PVA and MMT on the morphology and mechanical properties of the MMW-PVA/HMW-PVA/MMT nanofibers were investigated for the first time. Scanning electron microscopy, viscometer, tensile strength testing machine, thermal gravimetric analyzer (TGA), and transmission electron microscopy (TEM) were utilized to characterize the PVA/MMT nanofibers morphology and properties. The MMW-PVA/HMW-PVA ratios and MMT concentration played important roles in nanofiber's properties. TEM data demonstrated that exfoliated MMT layers were well distributed within nanofibers. It was also found that the mechanical property and thermal stability were increased with HMW-PVA and MMT contents.     

Preirradiation grafting of N-vinyl-2-pyrrolidone onto poly(tetrafluoroethylene) and poly(tetrafluoroethylene-hexafluoropropylene) films

Preirradiation grafting of N-vinylpyrrolidone (NVP) onto poly(tetrafluoroethylene) (PTFE) and poly(tetrafluoroethylene-hexafluoropropylene) (FEP) films was investigated. The influence of grafting parameters such as preirradiation dose, monomer concentration, and grafting temperature on the rate and grafting yield was studied. Different solvents were used for diluting the monomer and it was found that the aqueous monomer solution at a concentration of 80 wt% was suitable for this grafting system. However, the graft polymerization of NVP in benzene terminated within a short time without significant grafting yield. The dependence of the grafting rate on preirradiation dose and monomer concentration was 1.2 and 1.07 order, respectively, for grafting onto PTFE films and 1.1 and 1.2 order, respectively, for grafting onto FEP films. Arrhenius plots for grafting onto PTFE films showed a breaking point at ca. 35°C and the overall activation energies were calculated as 23.6 and 9.0 Kcal/mol below and above 35°C, respectively. For grafting onto FEP films, however, no break was observed in the Arrhenius plots; the overall activation energy was 11.9 Kcal/mol. The swelling behavior and electric resistance of the grafted materials were investigated.     

Binding of 1-anilinonaphthalene-8-sulphonate to poly (N-vinyl-2-pyrrolidone)

The binding of 1-anilinonaphthalene-8-sulphonate (ANS) to poly(N-vinyl-2-pyrrolidone) (PVP) of molecular weight grades k30 (molecular weight 40,000) and k90 (360,000) was studied by a dialysis technique in 0·05 M phosphate buffer, pH 7·1, at different temperatures. The intrinsic binding constant,K, was determined. The binding was favoured by negative enthalpy and positive entropy in both the systems indicating respectively that energetic forces and hydrophobic interactions were contributing to the binding affinity. The effects of addition of urea and palmitic acid on binding were investigated by dialysis and fluorescence techniques. The results showed that the binding of ANS to PVP was dependent on the nature and microenvironment of the binding sites and thereby pointed out the importance of the iceberg structure of water in the binding system.     

Graft copolymerization of N-vinyl-2-pyrrolidone onto pre-irradiated poly(vinylidene fluoride) powder

Graft copolymerization of N-vinyl-2-pyrrolidone (NVP) onto ⁶⁰Co γ-ray pre-irradiated poly (vinylidene fluoride) (PVDF) powder was investigated to find out the relationship between the degree of grafting (DG) and various factors, including monomer concentration, irradiation dose, reaction time, catalyst and so on. The DG can be calculated by comparing the amount of nitrogen element in the resulting copolymer (PVDF-g-PVP) powder with that in PVP on the basis of element analysis. The presence of PVP in the resulting PVDF powder was confirmed by the comparative studies of pristine PVDF and grafted PVDF powder through Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR), X-ray photoelectron spectroscopy (XPS), thermo gravimetric analyzer (TGA) and differential scanning calorimetry (DSC), respectively. When the reaction was performed at the monomer concentration of 20% (vol.) and the absorbed dose of 40 kGy for 3 h in water, the max. DG of 17.7% was obtained.     

Binding studies of sodium dodecyl benzene sulphonate with poly(N-vinyl-2-pyrrolidone)

The binding of sodium dodecyl benzene sulphonate (SDBS) with poly(N-vinyl-2-pyrrolidone) (PVP) has been investigated at 303.15 and 313.15 K using equilibrium dialysis, surface tension, viscosity, ultrasound velocity and ultrasound absorption techniques. From each of these studies four distinct regions of SDBS-PVP interactions were observed. Interaction of SDBS with PVP was found to involve the binding of surfactant dimers with the polymer molecule followed by usual micellization. The binding data has been analyzed in terms of various models of polymer-surfactant interaction.     

Interaction of 1-anilinonaphthalene-8-sulphonate with cross-linked poly (N-vinyl-2-pyrrolidone)

The interaction of 1-anilinonaphthalene-8-sulphonate (ANS) with cross-linked poly(N-vinyl-2-pyrrolidone) (CPVP) was studied by the adsorption technique at different temperatures and at two different pH values. Analysis by the Scatchard method and the study made in the presence of urea showed that the iceberg structure of water affects the sorption of ANS to CPVP, leading to cooperativity. The observed Giles sorption isotherms at both the pH values were of theL-type which indicated the interaction of ANS in flat configuration with the binding site in CPVP. The sorption of ANS to CPVP was enhanced considerably at acidic pH due to some structural factors which also resulted in multilayer sorption at this pH. Comparison of binding of ANS to CPVP and to linear poly(N-vinyl-2-pyrrolidone) demonstrated the greater contribution of hydrophobic interaction in CPVP than in the linear polymer.     

Effect of poly(vinyl alcohol) fine particles as a novel biodegradable nucleating agent on the crystallization of poly(3‐hydroxybutyrate)

The effect of poly(vinyl alcohol)(PVA) fine particles as the nucleating agent on the crystallization behavior of bacterial poly(3‐hydroxybutyrate)(PHB) was studied using differential scanning calorimetry measurements and polarized light microscope observation. The results were compared with the effect of PVA conventionally blended with PHB. The PVA fine particles were found to be able to greatly enhance the crystallization of PHB, while the conventionally blended PVA extremely retarded the crystallization of PHB. The nucleating effect of PVA fine particles is almost comparable to that of the talc powder. Considering the biodegradability and biocompatibility of PVA, the usage of PVA particle as a nucleating agent provides marked benefits over the currently employed nonbiodegradable nucleating agents, such as talc and boron nitride. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44:1813–1820, 2006     

The role of hydrogen-bonding interaction in poly(vinyl alcohol)/poly(acrylic acid) blending solutions and their films

<正>The aim of this work is to investigate the hydrogen-bonding interaction in poly(vinyl alcohol)(PVA)/poly(acrylic acid)(PAA) blending system and its influence on rheological properties in solution and the physical properties in solid state. Introducing PAA into PVA solutions resulted in a thickening behavior of blend solutions.The viscosity of the solutions increased with PAA content increasing,and a maximum viscosity could be obtained when the ratio of PVA/PAA was 70/30. The intermolecular hydrogen-bonding and miscibility between PVA and PAA in solid state were investigated by differential scanning calorimetry(DSC),Fourier transform infrared spectroscopy(FTIR) and mechanical measurements.The results displayed the great influence of introducing PAA on the properties of blending films.The tensile strength increased from 89.31 MPa to 119.8 MPa and Young's modulus improved by over 300%with increasing PAA concentration compared with those of pure PVA films.By systematically studying the rheological behaviors of solutions and the physical properties of films,the influence of hydrogen-bonding in solutions and solid states were discussed.     

Size-dependent interaction of the poly(N-vinyl-2-pyrrolidone) capping ligand with Pd nanocrystals

Pd nanocrystals were prepared by the reduction of a H(2)PdCl(4) aqueous solution with C(2)H(4) in the presence of different amounts of poly(N-vinyl-2-pyrrolidone) (PVP). Their average size decreases monotonically as the PVP monomer/Pd molar ratio increases up to 1.0 and then does not vary much at higher PVP monomer/Pd molar ratios. Infrared spectroscopy and X-ray photoelectron spectroscopy results reveal the interesting size-dependent interaction of PVP molecules with Pd nanocrystals. For fine Pd nanocrystals capped with a large number of PVP molecules, each PVP molecule chemisorbs with its oxygen atom in the ring; for large Pd nanocrystals capped by a small number of PVP molecules, each PVP molecule chemisorbs with both the oxygen atom and nitrogen atom in the ring, which obviously affects the structure of chemisorbed PVP molecules and even results in the breaking of involved C-N bonds of some chemisorbed PVP molecules. Charge transfer always occurs from a chemisorbed PVP ligand to Pd nanocrystals. These results provide novel insights into the PVP-metal nanocrystal interaction, which are of great importance in the fundamental understanding of surface-mediated properties of PVP-capped metal nanocrystals.