Ferromagnetic order and critical behavior at surfaces of ultrathin epitaxial films

The critical behavior, ferromagnetic order and magnetic anisotropies of ultrathin, epitaxial, magnetic films is studied using electron capture spectroscopy (ECS), which is capable of probing the long-ranged and short-ranged electron spin polarization (ESP) at the topmost surface layer of uncoated and coated magnetic structures. For all systems [Ni(100)/Cu(100), Ni(100)/NaCl(100), fcc Fe(111)/Cu(111), Fe(100)/Ag(100), Tb/Fe(100)/Ag(100), Fe(100)/Au(100), hcp Tb(0001)/W(110), Fe(110)/W(110), V(100)/Ag(100), Pd(100)/Ag(100), Pd/W(110)] investigated so far, ferromagnetic order is detected. It is found that the surface Curie temperatureT _Cs depends on film thicknessd. ECS data obtained at the surface of various systems reveal the existence ofT- andd-dependent magnetic anisotropies. Although for V(100)/Ag(100) the measured critical exponent=0.128 agrees very well with=1/8 predicted for the two-dimensional Ising model, for other systems, such as Fe(100)/Au(100), the measured value (0.25) is in disagreement with theoretical predictions. The experimental results are discussed within the framework of presently available experimental and theoretical data.     

Influence of surface roughness and chemisorption on magnetic hysteresis curves of a Ni(110) surface observed by spin-resolved inverse photoemission

Using the high spin asymmetry in inverse photoemission of the Ni d-band just above the Fermi level as an indicator of surface magnetization, we have measured hysteresis curves of the (110) surface of nickel. Nearly rectangular hysteresis loops indicate a well-defined behavior of the surface magnetization of the picture-frame single crystal with sides along 110 directions. The influence of geometrical order and chemisorption of O, S, and CO on the shape of the hysteresis loops has been investigated. We found a significant reduction of the coercive force (about 10%) if the clean high-quality (110) surface is disordered on an atomic scale by ion bombardment or low-coverage chemisorption.     

Magnetism of ultrathin Fe(110) films

Application of conversion electron Mössbauer spectroscopy (CEMS) to structural and magnetic analysis of ultrathin films and their interfaces is reviewed. Fe(110) films were prepared on W(110) under UHV conditions and analyzed in situ. CEMS provides detailed information on the mode of growth and film structure and on magnetic hyperfine fields, B _hf. Local structure of B _hf across the film is discussed in relation to modifications of magnetic order caused by the finite (including monolayer) film thickness and by the electronic structure of the interface.     

Angle-resolved resonant photoemission of Ni(100) and Ni(110) single crystals

We have studied the valence band photoemission spectra of Ni(100) and Ni(110) single crystals near the excitation threshold for 3p core electrons. The resonant behavior of the 6 eV satellite does not depend on both the surface orientation and the polarization of the electric vector of an incident light for excitation. These results indicate that the 6 eV satellite should be under little influence of spatial symmetry of the valence band. In the angle-resolved photoemission spectra of Ni(100), we have observed another broad feature near the 6 eV satellite. It shows the large energy dispersion and is interpreted as due to the interband transition. In Ni(110), we have observed the weak valence band satellites at binding energies of about 9.3 eV and 13.4 eV. They do not show well-defined resonance around the 3p threshold.     

Magnetic properties of ultrathin Co films on Si (111)

Ultrathin cobalt films on clean (7×7) and Au covered Si (111) substrates were prepared by molecular beam epitaxy. The structure was studied by using scanning tunnelling microscopy and low energy electron diffraction. Magnetic properties were determined with the magneto-optic Kerr effect. It was found that Co nucleates in grains that prefer to grow along the bunched step edges of the Si substrate ([112?] direction), which induces a strong in-plane uniaxial anisotropy. By introducing Au buffer layers, the magnetic characteristics were improved by preventing the silicide reaction between Si and Co. Moreover, the tendency for step decoration disappears gradually results in the in-plane uniaxial anisotropy reduction.     

A new spin effect in photoemission with unpolarized light: Experimental evidence of spin polarized electrons in normal emission from Pt(111) and Au(111)

Unpolarized light ejects spin polarized electrons from Pt(111) and Au(111) even if the electron emission occurs normal to the surface. For off normal incidence of 11.8 eV, 16.9 eV, and 21.2 eV radiation, and for the main peaks in the photoemission spectra, a degree of spin polarization of up to 30% or more is found for the spin polarization component P _y perpendicular to the reaction plane. A crystal rotation about its surface normal does not change P _y . P _y is largest for transitions from bands with symmetry ₆ ³ . All these experimental findings agree with a recent theoretical prediction [1] of a new spin effect by Tamura and Feder.     

Surface electronic structure of Gd(0001) films on W(110)

Received: 1 September 1996/Accepted: 6 January 1997     

Development of magnetic anisotropies in ultrathin epitaxial films of Fe(001) and Ni(001)

Ultrathin films, bcc Fe(001) on Ag(001), fcc Fe(001) on Cu(001) and Fe/Ni(001) bilayers on Ag, were grown by molecular beam epitaxy. A wide range of surface science tools were employed to establish the quality of epitaxial growth. Ferromagnetic resonance and Brillouin light scattering were used to extract the magnetic properties. Emphasis was placed on the study of magnetic anisotropies. Large uniaxial anisotropies with easy axis perpendicular to the film surface were observed in all ultrathin structures studied. These anisotropies were particularly strong in fcc Fe and bcc Fe films. In sufficiently thin samples the saturation magnetization was oriented perpendicularly to the film surface in the absence of an applied field. It has been demonstrated that in bcc Fe films the uniaxial perpendicular anisotropy originates at the film interfaces. In situ measurements indentified the strength of the uniaxial perpendicular anisotropy constant at the Fe/vacuum, Fe/Ag and Fe/Au interfaces asK _us = 0.96, 0.63, and 0.3 ergs/cm² respectively. The surface anisotropies deduced for [bulk Fe/noble metal] interfaces are in good agreement with the values obtained from ultrathin films. Hence the perpendicular surface ansiotropies originate in the broken symmetry at abrupt interfaces. An observed decrease in the cubic anisotropy in bcc Fe ultrathin films has been explained by the presence of a weak 4th order in-plane surface anisotropy,K _1S=0.012 ergs/cm². Fe/Ni bilayers were also investigated. Ni grew in the pure bcc structure for the first 3–6 ML and then transformed to a new structure which exhibited unique magnetic properties. Transformed ultrathin bilayers possessed large inplane 4th order anisotropies far surpassing those observed in bulk Fe and Ni. The large 4th order anisotropies originate in crystallographic defects formed during the Ni lattice transformation.     

SHG investigations of the magnetization of thin Ni and Co films on Cu(001)

Received: 22 November 1998     

Ferromagnetism in the thermodynamically stable monolayer Fe(110) on W(110), coated by Ag

Ferromagnetic order in the thermodynamically stable, pseudomorphic monolayer Fe(110) on W(110), coated by Ag, was studied in situ in UHV using Conversion Electron Mössbauer Spectroscopy (CEMS) and Torsion Oscillation Magnetometry (TOM). Films near the monolayer coverage, prepared at 475 K, consist of nearly independent monolayer and double-layer patches. The properties of monolayer patches are nearly independent of the mean film thickness resulting in excellent conditions to determine the true monolayer properties. The Curie temperature is reduced toT _{c, mono}= 282 K = 0.27 T_c,bulk, the ground state hyperfine field is reduced toB _hf(0)=11.9 T = 0.35B _hf,bulk(0) and the magnetic moment per atom is enhanced to(0) = 2.53 _B=1.14(0)_bulk. Remanent magnetization is detected forT 260 K=0.92T _{c, mono}, square loop magnetization forT 230 K=0.82T _{c, mono}. Unusual properties of the phase transition are detected by the combination of both experimental techniques.     

Spin-resolved photoemission study of in situ grown epitaxial Fe layers on W(110)

Spin- and angle-resolved photoemission spectroscopy of in situ grown epitaxial Fe layers on W(110) shows bulk-like behavior for more than two atomic Fe layers. For about ten and more atomic layers of Fe we find a spin polarization to be about -100% near the Fermi energy and +80 % between 1 eV and 3 eV binding energy. For the bilayer of Fe drastic changes in the spin-resolved spectra and a 20 % enhancement of the spin polarization compared to the bulk value are observed. The monolayer of Fe is ferromagnetically ordered with a spin polarization reduced by about 50%. A switching of the easy magnetization axis from [001] to [11̄0] is observed in the spin polarization with decreasing Fe layer thickness near d = (65±5) Å.     

Measurement of the coupling strength distribution in ferromagnetic (F)/antiferromagnetic (AF) exchange bias systems

We propose a method for determination of the distribution function P(j) of the coupling energy density j in polycrystalline textured ferromagnetic (F)/antiferromagnetic (AF) film systems. P(j) governs the entire film coupling J and the exchange bias field H_e and was not measurable until now. The method is verified by torquemetry in a high magnetic field and by reversing its rotation sense. The transition to a new magnetic steady state after rotation reversal is analyzed within a Stoner–Wohlfarth model including thermal relaxation. This transition is completed earlier for strongly coupled grains than for grains with smaller j, which is reflected in the torque curves. We determined P(j) for a sputtered NiFe(16 nm)/IrMn(0.8 nm) film at T=50 K in the hysteretic range of coupling energies and found that P strongly decreases for increasing j.     

Spin asymmetry and s-electron itinerancy in Co/X (X=Co,Cu, V and Ta) multilayers: their dependence on the electronegativity of non-magnetic layers

The electronic structure and magnetic properties of the Co at the Co/X (X=Co, Cu, V and Ta) interfaces have been studied by first-principle discrete variational method. We have found that the spin asymmetry and the s-electron itinerancy of the Co interface layer in the Co/X systems are strongly dependent on the electronegativity of the non-magnetic layers. A large difference in the electronegativity between the non-magnetic and Co layers is unfavorable both for s-electron itinerancy and for the spin exchange split of DOS at the Fermi level. Further study on charge density has revealed that a bond is formed across the Co/V and Co/Ta interfaces.     

A comparison of the magnetic anisotropy of [001] and [111] oriented Co/Pd Multilayers

Superlattices of [001]_fcc Co/Pd with varying Co thicknesses from one to eight atomic layers per modulation period were epitaxially grown on NaCl by vapour deposition in UHV. Transmission electron diffraction indicates lattice coherence between the Co and the Pd layers for Co thicknesses up to six atomic layers. If deposited at a substrate temperatureT _s=50°C, only the superlattices containing Ci-monolayers show perpendicular magnetization. By raisingT _s to 200°C, the perpendicular anisotropy for Co monolayers is increased, and is also observed for Co bilayers. We suggest that this is due tolayer smoothening, which increases Néel's interface anisotropy. For more than 6 atomic layers of Co a loss of coherence is observed atT _s=50°C, accompanied by a structure transformation to hcp Co with a (0001)_Co(111)_Pd orientation.Non-epitaxial polycrystalline [111]-multilayers have a different anisotropy versus thickness behaviour. For such multilayers the range of Co thicknesses giving perpendicular magnetization is extended from 8 Å up to 12 Å atT _s=200°C. The different behaviour of the single crystal [001] films is caused by a strong volume contribution to the anisotropy, which favours in-plane magnetization, opposing the perpendicular interface anisotropy. This easy-plane term is attributed to magneto-elastic anisotropy due to stretching of the Co layers, via a positive magnetostriction.     

Thickness dependence of the magnetic properties and magnetoimpedance effect in CoFeAlO thin films

The change of the magnetic properties and magnetoimpedance effect of Co–Fe–Al–O thin films with film thicknesses 50–1200 nm has been investigated. The coercivity and the anisotropy field changed strongly with increase of film thickness, while the saturation induction almost remained unchanged. The maximum value of GMI effect obtained about 33% for a film thickness of 1200 nm.     

Au/Si(111) and the formation of silicides at the interface examined by spin-resolved photoemission

Au on Si(111) in the 1×1 structure for different coverages and in the , and the 5×1 reconstructions has been studied by means of spin-, angle-, and energy-resolved photoemission. The photoemission studies were performed at normal incidence of the circularly polarized light and normal electron emission. In addition to Au- and Si-derived peaks other highly spin-polarized peaks are observed for a coverage of 8 Au layers grown at room temperature. In keeping with previous work these peaks are interpreted as silicide peaks. The spin polarization of these peaks gives clues concerning the levels involved in the silicide formation. For a coverage of 16 Au layers on Si(111) in the 1×1 structure the photoemission spectra are similar to the spectra of a Au(111) crystal, but also show a contribution of the silicide peaks. For lower coverages the spectra are nearly independent of the structure (1×1, or 5×1) and already show peaks other than the pure Au- and Si-derived peaks. The Auger signal, however, does not show contributions in addition to the pure Si signal.     

In situ resistivity and magnetoresistance studies of Co/Au(111) single layers and bilayers

We report here on resistance and magnetoresistance (MR) studies of ultrathin Co/Au(111) single sandwiches and bilayers with perpendicular magnetization. Resistance of the films was measured in situ in ultrahigh vacuum, during depositions and as a function of a perpendicular applied magnetic field. A large MR variation with the thickness of Au coverage was observed and compared to calculations. The coercive field of the Co films shows a drastic variation with the Au coverage thickness, which reflects the theoretical anisotropy variation. It was measured as a function of temperature. For the first time, the effect of interlayer interaction on the resistivity of a Co bilayer during the growth of Co top layer, is evidenced and compared to calculations. Finally, hysteresis loops of strongly antiferromagnetically coupled bilayers are investigated. Received 3 November 1998 and Received in final form 18 January 1999     

Evidence for the short-period oscillations in spin-resolved photoemission of thin Cr(110) films

The spin-resolved electronic structure of thin Cr overlayers on top of the Fe(110) surface was investigated by means of spin- and angle-resolved photoelectron spectroscopy. The initial fast drop of photoelectron spin-polarization at the Fermi level, followed by weak oscillatory behavior with the period of about 2 ML, can give an evidence for the first time spectroscopic observation of the short period oscillations in (110)-oriented thin Cr films.