火灾烟颗粒分形模型和球形模型光散射的比较研究

对烟颗粒的光散射进行模拟计算是研究火灾烟颗粒光散射特性的重要手段,目前对于火灾烟颗粒光散射的数值计算多采用球形或椭球模型.实际上,火灾烟颗粒的形貌与球形和椭球均存在着显著差异.扫描电子显微镜图像表明,烟颗粒具有近似分形的结构.本文利用离散偶极近似方法计算了随机取向的火灾烟颗粒分形凝团以及同体积的球形颗粒的光散射Muller矩阵,并对两者的归一化Muller矩阵元素随散射角的分布进行了比较.研究表明:火灾烟颗粒分形模型和球形模型的归一化矩阵元素F₁₁(θ)/     

火灾烟雾颗粒凝并分形特性研究

火灾烟雾颗粒因布朗运动由初期的主粒子凝并形成大颗粒的凝团结构，其外形呈现出分形特征，根据分形理论对火灾烟雾颗粒凝团结构进行分析研究，采用场发射扫描电镜对多种材料的烟雾颗粒图像进行测试，通过对烟雾凝团图像进行处理，获得了火灾探测中常见的多种材料的分形维数和分形系数，给出了烟雾颗粒的主粒子粒径，并对其影响因素进行了对比分析，为火灾烟雾探测中颗粒凝并分形特性研究提供有益的探索. 关键词： 火灾 烟雾 颗粒 凝并 分形     

分形海面的微波电磁散射计算模型

利用2维Weierstrass带限函数建立了模拟粗糙海面形状的模型,讨论了分形维数、频率幅度尺度因子等分形参数对海面形状的影响。以粗糙海面形状模型为基础,针对模拟的分形海面形状,从亥姆霍兹积分出发,利用基尔霍夫近似推导出2维分形海面的电磁散射系数,并进行了数值模拟。对微波电磁散射特性随分形维数、频率幅度尺度因子、入射波入射角变化的规律做了进一步讨论分析。在低掠射角时电波会受海面的遮挡,用遮挡函数对散射系数进行修正。研究表明:随着分形维数的增大,散射峰分布变均匀。频率幅度尺度因子越大,散射也越分散。随着入射角的增大,后向散射也逐渐增强,而前向散射逐渐减弱。     

基于超声波测量技术的颗粒尺寸分布模型的研究

提出了一种利用单颗粒背向散射信号来进行粒径分布估算的超声波测量技术,系统阐述了其 理论基础及基本工作原理。被测颗粒的散射信号幅度与它在探测区中的位置、颗粒尺寸和形状有关。 通过理论分析,建立了一个可用于描述散射信号幅度概率分布与颗粒系尺寸分布之间关系的数学模 型,对该模型的反演计算便可得到颗粒系的尺寸分布信息。为了避免求解过程中的病态系数矩阵问 题,将模型求解转化成了易于解决的最优化问题。仿真实例结果验证了该技术的可行性。     

分形粗糙面合成孔径雷达成像研究

研究了分形粗糙面的成像问题. 分形粗糙面能够较好的逼近真实环境, 采用带限形式的Weierstrass-Mandelbrot函数建立了分形粗糙面几何模型, 对分形粗糙面参数的选取进行了讨论. 对大尺度粗糙面散射问题提出了一种基于大面元的Kirchhoff近似方法, 采用面元模型来计算粗糙面总的后向散射场以及每一个面元的后向散射场, 并对面元的尺寸选取进行了研究, 通过与解析解进行对比证明了该方法的正确性. 在分形理论建立的确定性粗糙面几何模型与面元的Kirchhoff方法获取的散射场的基础上, 采用正侧视条带式成像模式, 并选用距离多普勒算法对不同分形参数的粗糙面进行合成孔径雷达(SAR) 成像模拟, 结果显示从SAR像中可以清晰地观察到不同分形参数对粗糙面几何轮廓的影响. 该研究包括了从环境模型、电磁模型到SAR成像技术在内的完整的分形环境SAR像模拟过程, 仿真结果显示出分形环境的SAR像特点, 这对基于分形理论的自然环境的遥感探测以及参数反演具有一定的理论支撑作用.     

随机散射屏的原子力显微镜形貌分析及其光散射特性

用原子力显微镜对三种不同粗糙度的随机散射屏的表面形貌进行了测量分析,发现它们在短程范围内具有明显的分形特征.对于粗糙度较大和较小的散射屏,分形特征分别以无规则的 高度调制和无特征大小的小颗粒的形式存在.用自仿射分形表面模型对散射屏的统计特性进 行了描述和拟合.光散射测量发现,散射光强在远轴区域按负幂函数下降,理论分析证明这 源于表面的分形结构;在近轴区域有散射亮环存在,用自仿射分形表面模型尚不能给出理论解释. 关键词： 随机散射屏 光散射 自仿射分形表面     

衍射散射式颗粒粒度测量法的研究新进展

介绍了衍射散射式颗粒粒度测量法的基本光路结构和理论模型,讨论了决定其性能优劣的重要指标--测量下限,对影响测量下限向小粒径范围延伸的参数进行了分析.继而介绍了近年来国内外主要粒度仪品牌在光学结构和散射理论模型方面所做的改进,阐述了它们的工作原理和性能特点.最后对衍射散射式颗粒粒度测量法的发展前景做出了展望,从修正理论模...     

双尺度动态分形粗糙海面的电磁散射及多普勒谱研究

利用更为符合海面实际散射场计算的双尺度法分析并计算了一维动态分形粗糙海面的后向散射截面，同时与微扰法有关结果进行了比较.研究了动态分形海面后向散射信号的多普勒谱分形特征，分析了不同极化状态下后向散射截面和多普勒谱谱宽随入射角及分维的变化规律，最后详细讨论了多普勒谱中心频率与海面Bragg谐振频率间的关系. 关键词： 双尺度模型 分形海面 电磁散射 多普勒谱     

用SAXS和XRD方法研究Ti02纳米颗粒微观结构

用溶胶一凝胶方法制备了TiO2纳米样品.并对该样品在300℃到800℃温度区域进行了退火处理.应用同步辐射x射线粉未衍射(XRD)方法研究了经不同热处理温度的TiO2纳米颗粒的结构相变.应用同步辐射小角x射线散射(SAXS)方法研究了TiO2纳米颗粒的表面分形与界面特性.得到纳米颗粒粒度与退火温度的变化规律,讨论r表面界面特征与相变的关系.     

碳烟颗粒沉积对管排换热器性能影响及优化

针对内燃机排气碳烟沉积、导致换热器的换热性能大幅降低的问题，本文建立了包含碳烟颗粒沉积与移除机制的数值模型，基于管排换热器沉积分布特性，研究了换热管形状及布置方式对碳烟沉积特性以及换热压降性能的影响规律。结果表明：沉积层达到动态平衡的时间随椭圆管轴长比增大而增大，与圆管结构相比，合适的椭圆管结构能够抑制碳烟沉积引起的换热性能下降；在无碳烟沉积时叉排结构换热压降性能优于顺排结构，但碳烟沉积对叉排换热器性能影响极大，考虑沉积后叉排圆管性能恶化82.53%，其性能反而远差于顺排结构；在考虑碳烟沉积的情况下，顺排轴长比为0.8的椭圆管结构的平均换热压降性能与顺排圆管和叉排圆管相比分别提高了51.63%和223.31%。     

Measurements of Silica Aggregate Particle Growth Using Light Scattering and Thermophoretic Sampling in a Coflow Diffusion Flame

The evolution of silica aggregate particles in a coflow diffusion flame has been studied experimentally using light scattering and thermophoretic sampling techniques. An attempt has been made to calculate the aggregate number density and volume fraction using the measurements of scattering cross section from 90° light scattering with combination of measuring the particle size and morphology from the localized sampling and a TEM image analysis. Aggregate or particle number densities and volume fractions were calculated using Rayleigh–Debye–Gans and Mie theory for fractal aggregates and spherical particles, respectively. Using this technique, the effects of H₂ flow rates on the evolution of silica aggregate particles have been studied in a coflow diffusion flame burner. As the flow rate of H₂ increases, the primary particle diameters of silica aggregates have been first decreased, but, further increase of H₂ flow rate causes the diameter of primary particles to increase and for sufficiently larger flow rates, the fractal aggregates finally become spherical particles. For the cases of high flame temperatures, the particle sizes become larger and the number densities decrease by coagulation as the particles move up within the flame. For cases of low flame temperatures, the primary particle diameters of aggregates vary a little following the centerline of burner and for the case of the lowest flame temperature in the present experiments, the sizes of primary particles even decrease as particles move upward.     

Particle Sizes of Fumed Oxides: A New Approach Using PCS Signals

Fumed oxides produced in gas‐phase processes, such as silicas and aluminum oxide, consist of a cluster of aggregated primary particles. The aggregate size of these particles is an important variable in many applications. However, current procedures for measuring particle sizes all assume that the particles have a spherical shape and are thus not truly capable of determining aggregate size. The results of such particle size measurements are consequently called “equivalent spherical diameter” (ESD), but these results vary from method to method. This publication shows that it is feasible to use the number of primary particles per aggregate, rather than the ESD, as a measure for the particle size of clusters of this type. The method is based on dynamic light scattering (photon correlation spectroscopy, PCS), which has proven itself in the analysis of fumed oxides. A numerical simulation based on random, computer‐generated model aggregates is used to modify the well‐known Stokes‐Einstein equation so that the number of primary particles can be determined.     

Using simple particle shapes to model the Stokes scattering matrix of ensembles of wavelength-sized particles with complex shapes: possibilities and limitations

We investigate to what extent the full Stokes scattering matrix of an ensemble of wavelength-sized particles with complex shapes can be modeled by employing an ensemble of simple model shapes, such as spheres, spheroids, and circular cylinders. We also examine to what extent such a simple-shape particle model can be used to retrieve meaningful shape information about the complex-shaped particle ensemble. More specifically, we compute the Stokes scattering matrix for ensembles of randomly oriented particles having several polyhedral prism geometries of different sizes and shape parameters. These ensembles serve as proxies for size-shape mixtures of particles containing several different shapes of higher geometrical complexity than the simple-shaped model particles we employ. We find that the phase function of the complex-shaped particle ensemble can be accurately modeled with a size distribution of volume-equivalent spheres. The diagonal elements of the scattering matrix are accurately reproduced with a size-shape mixture of spheroids. A model based on circular cylinders accurately fits the full scattering matrix including the off-diagonal elements. However, the modeling results provide us with only a rough estimate of the effective shape parameter of the complex-shaped particle ensemble to be modeled. They do not allow us to infer detailed information about the shape distribution of the complex-shaped particle ensemble.     

随机取向烟幕凝聚粒子的消光特性

采用蒙特卡罗方法根据团簇-团簇凝聚(CCA)模型对由球形原始微粒凝聚而成的烟幕凝聚粒子进行模拟,用离散偶极子近似(DDA)方法研究随机取向烟幕凝聚粒子的消光特性.结果表明,凝聚粒子的消光特性受到原始微粒数量以及粒径的影响,粒子的凝聚将减弱烟幕的消光性能;当凝聚结构中原始微粒的数目一定时,存在使烟幕消光性能达到最大的原始微粒粒径.     

分形凝聚粒子的光散射特性研究

粒子的形状和凝聚对光散射特性有着很大的影响.基于分形生长的受限扩散(DLA)模型,模拟了凝聚粒子的三维空间分形结构,并采用回转半径法计算了凝聚粒子的分形维数.利用离散偶极子近似(DDA)方法研究了纳米石墨凝聚粒子的光散射特性,对于原始粒子数不同的凝聚粒子及分形结构不同的凝聚粒子,数值计算了散射强度和偏振度随散射角的分布...     

Characterization of Agglomerated and Aggregated Aerosol Particles Using Image Analysis

Accurate particle size characterization of aggregated and agglomerated particles is only possible by analysis of photographs. Both the primary particle size and the morphology of the aggregate are important experimental results. Since standard image analysis techniques for particle size analysis usually recognize only single particles, a new programme, called here Sparse Hough Transformation, was developed for the automated recognition of spherical particles within an aggregate. The method is shown to perform well, even for images with many overlapping particles. The structure of the aggregate is analysed using the fractal dimension, determined from the density-density correlation function. Finite size effects, important when dealing with aggregates containing few primary particles, are taken into account by including a cut-off function.     

Influence of soot aggregate structure on particle sizing using laser-induced incandescence: importance of bridging between primary particles

Soot aggregates formed in combustion processes are often described as clusters of carbonaceous particles in random fractal structures. For theoretical studies of the physical properties of such aggregates, they have often been modelled as spherical primary particles in point contact. However, transmission electron microscopy (TEM) images show that the primary particles are more connected than in a single point; there is a certain amount of bridging between the primary particles. Particle sizing using the diagnostic technique laser-induced incandescence (LII) is crucially dependent on the heat conduction rate from the aggregate to the ambient gas, which depends on the amount of bridging. In this work, aggregates with bridging are modelled using overlapping spheres, and it is shown how such aggregates can be built to fulfil specific fractal parameters. Aggregates with and without bridging are constructed numerically, and it is investigated how the bridging influences the heat conduction rate in the free-molecular regime. The calculated heat conduction rates are then used in an LII model to show how LII particle sizing is influenced by different amounts of bridging. For realistic amounts of bridging ( $C_{\rm{ov}}\leq0.25$ ), the primary particle diameters were overestimated by up to 9 % if bridging was not taken into account.     

Polarization imaging of multiply-scattered radiation based on integral-vector Monte Carlo method

A new integral-vector Monte Carlo method (IVMCM) is developed to analyze the transfer of polarized radiation in 3D multiple scattering particle-laden media. The method is based on a “successive order of scattering series” expression of the integral formulation of the vector radiative transfer equation (VRTE) for application of efficient statistical tools to improve convergence of Monte Carlo calculations of integrals. After validation against reference results in plane-parallel layer backscattering configurations, the model is applied to a cubic container filled with uniformly distributed monodispersed particles and irradiated by a monochromatic narrow collimated beam. 2D lateral images of effective Mueller matrix elements are calculated in the case of spherical and fractal aggregate particles. Detailed analysis of multiple scattering regimes, which are very similar for unpolarized radiation transfer, allows identifying the sensitivity of polarization imaging to size and morphology.